Hi all

I've reported a couple of times that with the rewritten driver I get 
sometimes connection distortions without any error messages. The 
suggestion was to enable debugging in the driver. Today was such a day - 
perhaps the weather was right, so, I recompiled the driver with debugging 
loaded it, got the connection, and a few seconds later it was gone. And, 
well, there was nothing in dmesg... Then a few more seconds later the 
connection was re-established and I've got this:

20:47:04: zd1211rw 1-1.4:1.0: set_channel() channel 2
20:47:04: zd1211rw 1-1.4:1.0: zd_chip_lock_phy_regs() CR_REG1: 0xa0 -> 0x20
20:47:04: zd1211rw 1-1.4:1.0: zd_rf_set_channel() channel: 2
20:47:04: zd1211rw 1-1.4:1.0: zd_usb_rfwrite() value 0x0181989 bits 24
20:47:04: zd1211rw 1-1.4:1.0: zd_usb_rfwrite() value 0x01e6666 bits 24
20:47:04: zd1211rw 1-1.4:1.0: update_pwr_int() channel 2 pwr_int 0xba
20:47:04: zd1211rw 1-1.4:1.0: zd_chip_unlock_phy_regs() CR_REG1: 0x20 -> 0xa0
20:47:04: SoftMAC: sent association request!
20:47:04: SoftMAC: associated!
20:47:05: SoftMAC: Already associating or associated to 00:0f:66:d2:f9:7e

here the connection was established (unencrypted, openvpn on the top). 
Then it was lost, and re-established with this:

20:53:50: usb 1-1.4: handle_retry_failed_int() retry failed interrupt
20:54:43: usb 1-1.4: handle_retry_failed_int() retry failed interrupt

Is it just weak signal? But failed interrupt (URB?) is suspicious...

Guennadi Liakhovetski

Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
Zd1211-devs mailing list - http://zd1211.ath.cx/
Unsubscribe: https://lists.sourceforge.net/lists/listinfo/zd1211-devs

Reply via email to