Daniel Drake wrote: > > Have you been able to tell why the vendor driver does not suffer the > same problem? It would be good if we had more than one approach to > choose from :) >
The vendor driver has the same problem: <5>ZD1211B - version 2.15.0.0 <6>usb 1-7: configuration #1 chosen from 1 choice <5>vendor_id = 1582 <5>product_id = 6003 <5>USB 2.0 Host <5>Release Ver = 4810 <7>zd1211:bulk out: wMaxPacketSize = 200 <7>zd1211:bulk in: wMaxPacketSize = 200 <7>zd1211:interrupt in: wMaxPacketSize = 40 <7>zd1211:interrupt in: int_interval = 1 <7>zd1211:interrupt out: wMaxPacketSize = 40 <5>EEPORM Ver = 4810 <7>zd1211:uImgLength = 1400 <7>zd1211:translen = 1000 <7>zd1211:uCodeOfst = ee00 <7>zd1211:result = 1000 <7>zd1211:translen = 400 <7>zd1211:uCodeOfst = f600 <7>zd1211:result = 400 <4>Finsih download Firmware. Ready to reboot <7>zd1211:FIRMWARE_CONFIRM = 1 <7>zd1211:USB Download Boot code success <3>usb_set_configuration() failed <4>zd1211b: probe of 1-5:1.0 failed with error -5 <6>usbcore: registered new driver zd1211b At this point, I must reconnect the USB stick. Now I don't see the last three lines. It is going on with: zd1211:MAC address = ... If I do shut down the interface, unload the zydas driver and start our driver, I get our known error. I must reconnect the USB stick again. - Hartmut -- View this message in context: http://www.nabble.com/-zd1211rw--Driver-leaving-device-in-bugged-state---tf2288772.html#a6470170 Sent from the zd1211-devs mailing list archive at Nabble.com. ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys -- and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV _______________________________________________ Zd1211-devs mailing list - http://zd1211.ath.cx/ Unsubscribe: https://lists.sourceforge.net/lists/listinfo/zd1211-devs
