I have a 3COM 3CRUSB10075 wireless USB device which does not work with Fedora Core 6. I'm using the latest v1.3 firmware from sourceforge with a 2.6.20 vanilla kernel. I've tried zd1211rw drivers from 2.6.19, 2.6.20 and also the git repo at http://dsd.object4.net/git/zd1211.git It has a USB id of 0ace:1215 ZyDAS.
On insert, I get the following in dmesg. zd1211rw 5-1:1.0: firmware version 4725 zd1211rw 5-1:1.0: zd1211b chip 0ace:1215 v4810 high 00-16-e0 AL2230_RF pa0 ---N zd1211rw 5-1:1.0: eth1 SoftMAC: ASSERTION FAILED (0) at: net/ieee80211/softmac/ieee80211softmac_wx.c:306:ieee80211softmac_wx_get_rate() SoftMAC: Associate: Scanning for networks first. SoftMAC: Associate: failed to initiate scan. Is device up? ADDRCONF(NETDEV_UP): eth2: link is not ready In NetworkManager 0.6.4 the scanned networks are shown (all at 100% signal) but attempting to connect fails every time. More log data is at the end of this emails. Ideas for how to debug this are welcome. Many thanks, Richard Hughes --------------------------------------------------------------- More details: NetworkManager spots the device as an "Unknown USB interface" but will not let me connect to my WEP network with dmesg output; SoftMAC: Associate: Scanning for networks first. SoftMAC: Scanning finished: scanned 11 channels starting with channel 1 SoftMAC: Queueing Authentication Request to 00:11:95:19:a7:4c SoftMAC: Cannot associate without being authenticated, requested authentication SoftMAC: Sent Authentication Request to 00:11:95:19:a7:4c. SoftMAC: Already associating or associated to 00:11:95:19:a7:4c SoftMAC: Open Authentication with 00:11:95:19:a7:4c failed, error code: 13 SoftMAC: Scanning finished: scanned 11 channels starting with channel 1 and NetworkManager --no-daemon: NetworkManager: <information> starting... NetworkManager: <information> eth2: Device is fully-supported using driver 'zd1211rw'. NetworkManager: <information> nm_device_init(): waiting for device's worker thread to start NetworkManager: <information> nm_device_init(): device's worker thread started, continuing. NetworkManager: <information> Now managing wireless (802.11) device 'eth2'. NetworkManager: <information> Deactivating device eth2. ... NetworkManager: <information> User Switch: /org/freedesktop/NetworkManager/Devices/eth2 / itest NetworkManager: <information> Deactivating device eth2. NetworkManager: <information> Device eth2 activation scheduled... NetworkManager: <information> Activation (eth2) started... NetworkManager: <information> Activation (eth2) Stage 1 of 5 (Device Prepare) scheduled... NetworkManager: <information> Activation (eth2) Stage 1 of 5 (Device Prepare) started... NetworkManager: <information> Activation (eth2) Stage 2 of 5 (Device Configure) scheduled... NetworkManager: <information> Activation (eth2) Stage 1 of 5 (Device Prepare) complete. NetworkManager: <information> Activation (eth2) Stage 2 of 5 (Device Configure) starting... NetworkManager: <information> Activation (eth2/wireless): access point 'itest' is encrypted, but NO valid key exists. New key needed. NetworkManager: <information> Activation (eth2) New wireless user key requested for network 'itest'. NetworkManager: <information> Activation (eth2) Stage 2 of 5 (Device Configure) complete. NetworkManager: <information> Activation (eth2) New wireless user key for network 'itest' received. NetworkManager: <information> Activation (eth2) Stage 1 of 5 (Device Prepare) scheduled... NetworkManager: <information> Activation (eth2) Stage 1 of 5 (Device Prepare) started... NetworkManager: <information> Activation (eth2) Stage 2 of 5 (Device Configure) scheduled... NetworkManager: <information> Activation (eth2) Stage 1 of 5 (Device Prepare) complete. NetworkManager: <information> Activation (eth2) Stage 2 of 5 (Device Configure) starting... NetworkManager: <information> Activation (eth2/wireless): access point 'itest' is encrypted, and a key exists. No new key needed. NetworkManager: <information> SUP: sending command 'INTERFACE_ADD eth2 wext /var/run/wpa_supplicant ' NetworkManager: <information> SUP: response was 'OK' NetworkManager: <information> SUP: sending command 'AP_SCAN 1' NetworkManager: <information> SUP: response was 'OK' NetworkManager: <information> SUP: sending command 'ADD_NETWORK' NetworkManager: <information> SUP: response was '0' NetworkManager: <information> SUP: sending command 'SET_NETWORK 0 ssid 69333836' NetworkManager: <information> SUP: response was 'OK' NetworkManager: <information> SUP: sending command 'SET_NETWORK 0 key_mgmt NONE' NetworkManager: <information> SUP: response was 'OK' NetworkManager: <information> SUP: sending command 'SET_NETWORK 0 auth_alg SHARED' NetworkManager: <information> SUP: response was 'OK' NetworkManager: <information> SUP: sending command 'SET_NETWORK 0 wep_key0 <key>' NetworkManager: <information> SUP: response was 'OK' NetworkManager: <information> SUP: sending command 'SET_NETWORK 0 wep_tx_keyidx 0' NetworkManager: <information> SUP: response was 'OK' NetworkManager: <information> SUP: sending command 'ENABLE_NETWORK 0' NetworkManager: <information> SUP: response was 'OK' NetworkManager: <information> Activation (eth2) Stage 2 of 5 (Device Configure) complete. ioctl[SIOCGIWSCAN]: Resource temporarily unavailable NetworkManager: <information> Old device 'eth2' activating, won't change. NetworkManager: <information> Activation (eth2/wireless): association took too long (>20s), failing activation. NetworkManager: <information> Activation (eth2) failure scheduled... NetworkManager: <information> Activation (eth2) failed for access point (itest) NetworkManager: <information> Activation (eth2) failed. NetworkManager: <information> Deactivating device eth2. sendmsg(CTRL_IFACE monitor): No such file or directory ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys-and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV _______________________________________________ Zd1211-devs mailing list - http://zd1211.ath.cx/ Unsubscribe: https://lists.sourceforge.net/lists/listinfo/zd1211-devs
