MAGnUm wrote: > i didn't go the RTFM road yet :) but i can. the snmp poll will eventually > note that it is down, but traps are instantaneous (ie they push their status > to a trap destination eg zenoss) if you setup traps on your monitored device, > you must do this on your switch and or router (RTFM :)) and yes if you load > mibs which is documented in the faqs or in the forum you should get some > detail. btw the cisco mibs are numerous, so make sure you only get what you > really need :) > > and don't take the RTFM to heart i just had to use it cause you seemed like > you wanted me to :) > > good luck.
Thanks, I will check it out. It is always good to get some pointers before going all out on sumfink like this, it is a few hundred switches that we must update with new settings.. Well, after the test phase that is :) -- Regards Folke ------------------------ unset -------------------- m2f -------------------- Read this topic online here: http://community.zenoss.com/forums/viewtopic.php?p=11612#11612 -------------------- m2f -------------------- _______________________________________________ zenoss-users mailing list [email protected] http://lists.zenoss.org/mailman/listinfo/zenoss-users
