asanabria wrote: > This morning we had a 2 hour window Maintenance create from 4:20AM to 6:20AM. > This is the only Maintenance Window we have set, We verified that the > maintenance window was set to enabled as well. > > Long story short, we were still getting paged 20 min after the > maintenance window was set. > > The start state was set to Maintenance and the Stop state was set to Original. > All of our alerting rules only page for Production Devices.
I'm sorry you're having problems, but at the same time I'm overjoyed that someone else is having problems with maintenance windows! I have also had issues with getting pages during a maintenance window but haven't said anything about it because I've been beating the "Maintenance Windows are broken" drum for a while with very little response ( http://community.zenoss.com/forums/viewtopic.php?t=3819 ). Can this please get looked at? It just seems that the whole maintenance window code needs a good once-over...and again, I don't want to just point out the problems, I very much want to help fix it. I'll test anything; I'll give any information needed to get this solved, and I'm betting that asanabria will as well, because getting paged when you're not supposed to is just about as bad as not getting paged when there *is* an issue. </rant> Asanabria, I'm going to do a little testing on my installation to see if I can reproduce your issue and I'll post my results back here. In the meantime, what version of Zenoss are you using? -------------------- m2f -------------------- Read this topic online here: http://community.zenoss.com/forums/viewtopic.php?p=13464#13464 -------------------- m2f -------------------- _______________________________________________ zenoss-users mailing list [email protected] http://lists.zenoss.org/mailman/listinfo/zenoss-users
