Chet Luther wrote:
I made the mistake of altering the snmptrap and syslog configuration
on a device I intended to monitoring before I added the device in
zenoss. zenoss starting showing events from this device in the event
console under it's ip address.
The IP address that the trap/syslog comes from needs to match one of the
IP addresses of the device's interfaces (on OS tab.) If you don't have
the interfaces modeled you should look at its snmpd.conf file to be sure
that Zenoss has access to the full MIB tree.
The ip address from which the syslog message is coming from (and is
shown in the event console in the device column) is on the os page of
the device. One thing I noticed in checking that interface (eth5 in
this case) is that it's operational status is shown as being down on the
os/eth5 page, despite the graphs showing ontinuing traffic.
I'm not sure why it would be marked down, when I look at the IF-MIB
entries for that interface, it says it's up. And it is up of course,
since that's the ip address I use to connect to the machine.
_______________________________________________
zenoss-users mailing list
[email protected]
http://lists.zenoss.org/mailman/listinfo/zenoss-users
