Greetings, In an effort to get the gmaps portal working properly, I decided to rebuild the /Networks container. I blew away the all of the networks then manually forced a remodel for all my network devices. After running the re-model multiple times, I can't get zenoss to properly break down the networks into the network sizes specified in zDefaultNetworkTree (8,16,24,32).
For example, if I model a device with an ethernet interface address of 10.20.10.1/24 I end up with the following object under /Networks: /Networks/10.0.0.0/10.20.0.0/10.20.21.1 What I was expecting was: /Networks/10.0.0.0/10.20.0.0/10.20.21.0/10.20.21.1 In fact, I modeled a device with an IP address of 10.20.19.1 and got a network entry that I expected: /Networks/10.0.0.0/10.20.0.0/10.20.19.0/10.20.19.1 I've also tried creating a subnet object that would contain one of the hosts addresses, but zenoss doesn't put the host in the subnet I'm running 2.1.1 (the behavior was the same with 2.1.0). All of this worked properly in 2.0.x. Anyone seeing a similar issue? -------------------- m2f -------------------- Read this topic online here: http://community.zenoss.com/forums/viewtopic.php?p=14132#14132 -------------------- m2f -------------------- _______________________________________________ zenoss-users mailing list [email protected] http://lists.zenoss.org/mailman/listinfo/zenoss-users
