[Laughing] Hahaha...that actually worked but why? As I stated, I previously ran a loop, snmpgetbulk and manually put in this OID and the unit returned it just fine for around 200 iterations a few times but then I was using v2c there too.
Is this some sort of known issue with the Canon MFP units and the modeller? Please shed some light. Also worthy of note, right after remodelling, the agent died but I rebooted the copier and it came back up and it's working so far. cluther wrote: > On May 3, 2008, at 8:43 PM, AsGF2MX wrote: > > > I have a number of imageRunner 3570 and 2870 devices that are > > refusing to cooperate with ZenOSS. > > > > What happens: > > 1-I add the device in ZenOSS, half way through the modelling, it > > stalls. > > 2-With the help of port-mirroring to a box with wireshark, I noted > > that the SNMP agent on the printer dies after a snmp getbulkrequest > > for ipAdEntAddr (1.3.6.1.2.1.4.20.1.1). > > > > I'd recommend just setting the device to use SNMPv1 so that Zenoss > won't try using getbulk. > _______________________________________________ > zenoss-users mailing list > [email protected] > http://lists.zenoss.org/mailman/listinfo/zenoss-users -------------------- m2f -------------------- Read this topic online here: http://community.zenoss.com/forums/viewtopic.php?p=19307#19307 -------------------- m2f -------------------- _______________________________________________ zenoss-users mailing list [email protected] http://lists.zenoss.org/mailman/listinfo/zenoss-users
