Well thanks for the input. Looks like those SNMP agents are weak to say the least; they die too easily except in v1. So far so good but the one copier missing the ifUp and ifDown is still no good. Guess I'll have to leave it alone, except for the fact that the stupid thing is generating missing OID messages...
cluther wrote: > > > Hahaha...that actually worked but why? As I stated, I previously ran > > a loop, snmpgetbulk and manually put in this OID and the unit > > returned it just fine for around 200 iterations a few times but then > > I was using v2c there too. > > > > Is this some sort of known issue with the Canon MFP units and the > > modeller? Please shed some light. > > > > Also worthy of note, right after remodelling, the agent died but I > > rebooted the copier and it came back up and it's working so far. > > > > It worked because the getbulk method didn't even exist in SNMPv1. This > slows modeling down, but at least it works. I didn't previously know > about any error like this on Canon MFP units, but generally speaking > if the agent stops responding if you send it ANY packet it is a > problem with the agent. Zenoss uses the standard Net-SNMP libraries > for making these SNMP calls. > > _______________________________________________ > zenoss-users mailing list > [email protected] > http://lists.zenoss.org/mailman/listinfo/zenoss-users -------------------- m2f -------------------- Read this topic online here: http://community.zenoss.com/forums/viewtopic.php?p=19342#19342 -------------------- m2f -------------------- _______________________________________________ zenoss-users mailing list [email protected] http://lists.zenoss.org/mailman/listinfo/zenoss-users
