Have you checked the specs of the 1205 to see what maximum drive size it supports? That's an older card, IIRC, so it might top out at 500gb or something.
On Sat, Mar 28, 2009 at 10:33 AM, Harry Putnam <rea...@newsguy.com> wrote: > casper....@sun.com writes: > >>>I mentioned that pressing F3 doesn't do anything. That is, I have >>>now way to enter the configuration tool. >> >> >> Does it work when you first remove the 200GB drive, reboot, press F3 >> and see what you can do in that configuration tool. >> >> It is possible that it first needs to forget the 200GB drive. > > OK, booted with no sata drives attached. At the press F3 screen, > again pressing F3 appears to have no effect. But after a moment two > messages saying `no drives found' print out, and then boot proceeds. > > Once booted up I see the recurring message where I should see a login > prompt (I'm setup to boot into console mode). > > ata_id_common Busy Status 0xfe error 0x0 > > Repeated 4 times, then after maybe a 2-3 minute wait the regular login > prompt appears. > > There is something more going on that is dragging the machine down so > that typing at the prompt is delayed by huge pauses. > > I'm not really able to find out what it is yet but will post back > later after a reboot. > > > _______________________________________________ > zfs-discuss mailing list > zfs-discuss@opensolaris.org > http://mail.opensolaris.org/mailman/listinfo/zfs-discuss > _______________________________________________ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
