Paul, Have you done "zlogin -C zonename", it will initialize the zone environment including the network.
Chris Paul Van Der Zwan wrote: > I'm having a problem figuring out why my ping replies never get sent. > > I have a Blade 1500 running Solaris 10 08/07 > > On it I have 2 active local zones, zone1 and zone2, their configs are: > # zonecfg -z zone1 export > create -b > set zonepath=/zones/zone1 > set autoboot=false > set ip-type=shared > add inherit-pkg-dir > set dir=/lib > end > add inherit-pkg-dir > set dir=/platform > end > add inherit-pkg-dir > set dir=/sbin > end > add inherit-pkg-dir > set dir=/usr > end > add net > set address=192.168.200.50 > set physical=vni0 > end > > and > > # zonecfg -z zone2 export > create -b > set zonepath=/zones/zone2 > set autoboot=false > set ip-type=shared > add inherit-pkg-dir > set dir=/lib > end > add inherit-pkg-dir > set dir=/platform > end > add inherit-pkg-dir > set dir=/sbin > end > add inherit-pkg-dir > set dir=/usr > end > add net > set address=192.168.200.51 > set physical=vni1 > end > > The global zone has 192.168.200.14 configured on bge0 > The default gateway is 192.168.200.4. > > If I configure a host route routing 192.168.200.50 to 192.168.200.14 > on the router (192.168.200.4) and ping 192.168.200.50 > I see echo request packets arrive on the bge0 interface but I never > see any replies go out. > 192.168.200.4 -> 192.168.200.50 ICMP Echo request (ID: 27266 Sequence > number: 744) > 192.168.200.4 -> 192.168.200.50 ICMP Echo request (ID: 27266 Sequence > number: 745) > 192.168.200.4 -> 192.168.200.50 ICMP Echo request (ID: 27266 Sequence > number: 746) > > The routing table shows: > netstat -rn > > Routing Table: IPv4 > Destination Gateway Flags Ref Use > Interface > -------------------- -------------------- ----- ----- ---------- > --------- > default 192.168.200.4 UG 1 0 > 192.168.42.0 192.168.42.1 U 1 0 bge0:1 > 192.168.200.0 192.168.200.14 U 1 5 bge0 > 224.0.0.0 192.168.200.14 U 1 0 bge0 > 127.0.0.1 127.0.0.1 UH 1 38 lo0 > > ifconfig -a shows : > # ifconfig -a > lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu > 8232 index 1 > inet 127.0.0.1 netmask ff000000 > lo0:1: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> > mtu 8232 index 1 > zone zone1 > inet 127.0.0.1 netmask ff000000 > lo0:2: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> > mtu 8232 index 1 > zone zone2 > inet 127.0.0.1 netmask ff000000 > bge0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2 > inet 192.168.200.14 netmask ffffff00 broadcast 192.168.200.255 > ether 0:3:ba:2f:c1:bb > bge0:1: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 > index 2 > inet 192.168.42.1 netmask ffffff00 broadcast 192.168.42.255 > vni0: flags=20010100c0<RUNNING,NOARP,NOXMIT,IPv4,VIRTUAL> mtu 0 index 3 > inet 0.0.0.0 netmask 0 > vni0:1: flags=20010100c1<UP,RUNNING,NOARP,NOXMIT,IPv4,VIRTUAL> mtu 0 > index 3 > zone zone1 > inet 192.168.200.50 netmask ffffff00 > vni1: flags=20010100c0<RUNNING,NOARP,NOXMIT,IPv4,VIRTUAL> mtu 0 index 4 > inet 0.0.0.0 netmask 0 > vni1:1: flags=20010100c1<UP,RUNNING,NOARP,NOXMIT,IPv4,VIRTUAL> mtu 0 > index 4 > zone zone2 > inet 192.168.200.51 netmask ffffff00 > # > > > Any ideas ? > > > Paul > > _______________________________________________ zones-discuss mailing list zones-discuss@opensolaris.org
