Whit pointed me to this thread.  I won't reply to specifics, but maybe
just describe what we're doing (and planning to do), and how workingenv
differs from zc.buildout.

So... recently we (The Open Planning Project -- more specifically Rob
Miller) decided we need a better way to deploy our specific stack.  It
was hard, we couldn't tell other people how to do it, and we spent a
significant amount of time debugging each other's installations, or
chasing down bugs that we ultimately realized were just because of
slightly different installations.  I'm sure you all understand the
motivation; it's similar to what buildout is for, though we were more
focused on repeatability as a development tool than as a deployment tool.

I actually tried to do this once before with zc.buildout, but I didn't
get far -- probably a result of lack of effort and lack of familiarity
with the overall stack.  But I also recognize lots of the questions
about stuff like the zope.conf file and Data.fs that still seem
unresolved.  The thing that frustrated me with zc.buildout is that I
knew how to do what I wanted to do, but I still felt like I was a long
way from being able to do it.  And little things, like unhelpful error
messages and frustratingly slow performance really killed my motivation.
 After setting that project aside someone else at TOPP (Luke Tucker)
did a buildout for Deliverance because we needed to build some
non-Python libraries and that was a feature of buildout; that did end up
working eventually (after considerable effort), but it was not a very
satisfying experience, and *using* the buildout was itself a real
challenge.  Since Deliverance is just a library, to do anything useful I
also had to install another package that *uses* that library, and that
was surprisingly difficult.  Actually developing those libraries was
even more frustrating.

So then Rob decides to devote some time to deployment.  And because Rob
just wants to get this finished, he wrote the whole things from scratch.
 You can see the result of that here:
https://svn.openplans.org/svn/topp.deploy/trunk -- it's not a generic
setup tool, just what works for us.  The end result is something that
does everything we want, that we understand, and that we'll understand
how to extend.  An important difference from zc.buildout is that all the
logic and work is in *our* script, not in a framework driven by a config
file.  In the future Rob plans to use buildit
(http://cvs.plope.com/viewcvs/Packages/buildit/), and one of the
motivations there is that it has handy routines to do what topp.deploy
already does, but better.  It's more like a library and less like a
framework.  I could make some generalization here but I'll restrain myself.

The deployment script also uses workingenv, somewhat similarly because
it is more library-like.  Well, also because I work at TOPP and can
easily support their use, which is certainly a nontrivial reason for the
choice.  Workingenv in this case is basically a tool that provides the
isolation that we need to create something repeatable.  This is the main
feature overlap with buildout.  Workingenv is not the framework in which
topp.deploy is written, and workingenv is not intended as a framework.

Note also that topp.deploy does not have the full set of features we'll
ultimately need.  You can't tell it to install another egg, or setup
another script, or whatever.  And we don't *have* to add those features,
because workingenv is compatible with all the other tools.  Where "all
the other" is mostly easy_install.  But someday there will be more, even
if the progress is slow.  buildout is basically incompatible with
easy_install (the script).  And frankly I like easy_install.  It's
probably 10x faster than buildout.  easy_install is what people use in
documentation, and its conventions are the ones people know (why does
buildout not use "Pkg==version", for instance?).

As for the technical reasons they don't work together:

* workingenv allows and leaves it to setuptools to maintain the package
installation database (basically easy-install.pth).  This is not a very
good database, but eh.  buildout doesn't really have a database, but
instead just enforces what buildout.cfg indicates.

* workingenv relies on that database to give default versions and to
setup the Python path.  The fixup it does of installed scripts is fairly
minimal, just setting up sys.path enough to force its site.py to get
called.  buildout enumerates all the activated packages, and ignores
easy-install.pth.  This is basically what makes it
easy_install-incompatible.  Plus buildout's desire to own everything and
destroy everything it does not own ;)

* As a result buildout supports multiple things in the same buildout
that have conflicting version requirements, but where the packages
themselves don't realize this (but the deployer does).  If the packages
know their requirements then setuptools' native machinery allows things
to work fine.  The solution with workingenv is to create multiple
environments.  Since the actual building happens higher up (e.g.,
topp.deploy), there's nothing stopping you from creating multiple
environments from one deployment script.  Anyway, in summary the way
scripts are generated is one of the major incompatibilities between
buildout and workingenv.  In effect Buildout's jail is too strong for
workingenv to penetrate, and buildout doesn't tell anyone else about
what it is doing.

* workingenv allows you to change versions without informing or using
workingenv.  Once you've created the environment you mostly stop using
workingenv directly.

* Some see bin/activate as a jail.  Both workingenv and buildout are
deliberately jail-like.  Both Jim and I loathe the non-repeatability of
system-wide installations (at least I think I can speak for him on that
one point ;).  bin/activate lets you into that jail, and lets you work
there.  There is no way into a buildout.  Frankly this weirds me out,
and is a big part of my past frustration with it.  Maybe that's because
I'm in the relatively uncommon situation that I actually know what's
going on under the hood of Python imports and packaging, and so it
bothers me that I can't debug things directly.  Anyway, neither requires
activation when using scripts generated in the environment.  And
bin/activate is really just something that sets PYTHONPATH and then does
other non-essential things like changing the prompt and $PATH -- I
should probably document that more clearly.  Neither can be entirely
compatible with a system-wide Python installation, because Python's
standard site.py f**ks up the environment really early in the process,
and avoiding that isn't all that easy.  In some ways virtual-python is
the more complete solution to all of this, and sometimes I think I
should just use that technique (of a separate Python interpreter, and
hence separate prefix) with some of the improvements I could take from
workingenv.

Anyway, this is my very long summary of why we aren't using buildout,
and are using workingenv.

Cheers,
  Ian


_______________________________________________
Zope-Dev maillist  -  Zope-Dev@zope.org
http://mail.zope.org/mailman/listinfo/zope-dev
**  No cross posts or HTML encoding!  **
(Related lists - http://mail.zope.org/mailman/listinfo/zope-announce
http://mail.zope.org/mailman/listinfo/zope )

Reply via email to