Hi all,
DMESG:
3:1:1: usb_set_interface failed
[ 147.748299] e1000e 0000:01:00.0: Disabling ASPM L0s L1
[ 147.748466] e1000e 0000:01:00.0: irq 42 for MSI/MSI-X
[ 681.672258] usb 5-1: USB disconnect, device number 2
[ 693.256080] usb 5-1: new full-speed USB device number 3 using uhci_hcd
[ 693.412282] usb 5-1: New USB device found, idVendor=25c4, idProduct=0003
[ 693.412292] usb 5-1: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 693.412298] usb 5-1: Product: ARCAM USB Audio 1.0
[ 693.412304] usb 5-1: Manufacturer: ARCAM
[ 693.412309] usb 5-1: SerialNumber: 0000
var/log/messages:
Jan 25 15:33:48 debian kernel: [ 693.256080] usb 5-1: new full-speed USB
device number 3 using uhci_hcd
Jan 25 15:33:48 debian kernel: [ 693.412282] usb 5-1: New USB device
found, idVendor=25c4, idProduct=0003
Jan 25 15:33:48 debian kernel: [ 693.412292] usb 5-1: New USB device
strings: Mfr=1, Product=2, SerialNumber=3
Jan 25 15:33:48 debian kernel: [ 693.412298] usb 5-1: Product: ARCAM USB
Audio 1.0
Jan 25 15:33:48 debian kernel: [ 693.412304] usb 5-1: Manufacturer: ARCAM
Jan 25 15:33:48 debian kernel: [ 693.412309] usb 5-1: SerialNumber: 0000
Jan 25 15:33:49 debian mtp-probe: checking bus 5, device 3:
"/sys/devices/pci0000:00/0000:00:1d.3/usb5/5-1"
Jan 25 15:33:49 debian mtp-probe: bus: 5, device: 3 was not an MTP device
Jan 25 15:33:52 debian pulseaudio[3924]: [pulseaudio] module-udev-detect.c:
Tried to configure
/devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/sound/card1
(alsa_card.usb-ARCAM_ARCAM_USB_Audio_1.0_0000-00-A10) more often than 5
times in 10s
Uuninstalled pulseaudio because the working cofig does not cnotain it.
Rebooted.
/var/log/messages
Feb 1 15:27:23 debian kernel: [ 413.980166] usb 5-1: new full-speed USB
device number 2 using uhci_hcd
Feb 1 15:27:23 debian kernel: [ 414.142247] usb 5-1: New USB device
found, idVendor=25c4, idProduct=0003
Feb 1 15:27:23 debian kernel: [ 414.142257] usb 5-1: New USB device
strings: Mfr=1, Product=2, SerialNumber=3
Feb 1 15:27:23 debian kernel: [ 414.142263] usb 5-1: Product: ARCAM USB
Audio 1.0
Feb 1 15:27:23 debian kernel: [ 414.142268] usb 5-1: Manufacturer: ARCAM
Feb 1 15:27:23 debian kernel: [ 414.142273] usb 5-1: SerialNumber: 0000
Feb 1 15:27:23 debian mtp-probe: checking bus 5, device 2:
"/sys/devices/pci0000:00/0000:00:1d.3/usb5/5-1"
Feb 1 15:27:23 debian mtp-probe: bus: 5, device: 2 was not an MTP device
Feb 1 15:27:24 debian kernel: [ 415.252960] usbcore: registered new
interface driver snd-usb-audio
Can anyone make any sense of this?
2014-01-14 Clemens Ladisch <cladi...@googlemail.com>
> Vince Ur wrote:
> > I managed to retrieve the kernel tha makes the rPac work. it's the
> > 3.2.0-44 as you can see from aadebug below. Also, below I listed the
> > hw parameters from this set up since it seems they cannot be setup by
> > the other kernels.
>
> The "plughw" device and the USB audio driver can automatically convert
> hardware parameters; it is likely that the problem is with some other
> device initialization that happens when the parameters are set.
>
> Are there any error messages in the system log (probably
> /var/log/messages, or the output of dmesg) when this error happens?
>
>
> Regards,
> Clemens
>
------------------------------------------------------------------------------
WatchGuard Dimension instantly turns raw network data into actionable
security intelligence. It gives you real-time visual feedback on key
security issues and trends. Skip the complicated setup - simply import
a virtual appliance and go from zero to informed in seconds.
http://pubads.g.doubleclick.net/gampad/clk?id=123612991&iu=/4140/ostg.clktrk
_______________________________________________
Alsa-user mailing list
Alsa-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/alsa-user
