You going to keep us in suspense as to what the problem might be? ;-) -Philip
Darrick Hartman wrote: > I'm building a new version of the geni586.img file for 0.6.1. I believe > I've found the problem. New version will be uploaded later tonight. > > In the meantime, I'm removing the astlinux-0.6.1-geni586.img.gz file. > Note that there are no problems with the astlinux-0.6.1-geni586.tar.gz > files (which are intended to go into the 'os' directory in a prepared > runnix system). > > Darrick > > Michael wrote: > >> John, >> >> Thank you so much for the tip about doing runnix first. I am now >> booting fully after writing the runnix.img from Darrick's "obsolete" >> folder and then copying over the 0.6.1 run files. Yes, I was using >> geni586. It's a bit of a moot point now, but I'm using this hardware: >> http://www.enicomms.com/nagasaki/ >> and a Lexar Premium 512MB CF card. >> I grabbed 2 of the nagaskai's off eBay and 4 of the Lexar's a while >> back and it has worked out well for my experimenting with AstLinux. >> >> Now... onto the configuration process. >> >> Thanks everyone! >> >> Michael >> >> >> John Novack wrote: >> >>> Several of us have had similar/identical problems with the geni586 img file. >>> If you do the "two step" process, install runnix then the 0.6.1 geni586 tar >>> file, all works well. >>> Seems this is ONLY with the geni586 version, from what I have read, but >>> since I only use that one I can't say for sure. >>> No one smarter than I has had a chance to investigate what may be wrong. >>> Perhaps the geni586 img file should be removed until the problem is solved?? >>> >>> John Novack >>> >>> >>> Michael wrote: >>> >>> After the voip users conference call yesterday I was encouraged to update >>> my system to 0.6.1. I am having boot issues with a kernel panic. With >>> 0.4.3 I had to edit the boot options to use hdb instead of hda, but with >>> the runnix setup (using the 0.6.1 img file made available) it appears to be >>> mount agnostic. Is there something in the .run file that would need changed >>> for hdb or am I running into something else altogether? Screen shot >>> attached. >>> >>> Thanks, >>> Michael >>> >>> ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ _______________________________________________ Astlinux-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to [EMAIL PROTECTED]
