Guillermo Rozas wrote: > > I think there is a V3_to_V4 conversion tool (look for it in the manual), but > it works on data that BacupPC already knows.
I believe BackupPC 4.x can still read V3 pools? > Maybe you could try to create a V3 pool for a ficticious client, add the old > data by hand into the folder structure, and then convert it to V4, but it > could be risky to your current pool. Adding data is the part for which I have not found any guide so far. BR, Fabian > On Wed, Aug 3, 2022 at 2:31 PM backuppc--- via BackupPC-users > <backuppc-users@lists.sourceforge.net> wrote: > > Hi, > > > > I pulled a V3 pool off an old hard disk that I had wrongly assumed was > > broken. Now I would like to import as much data as possible into my current > > V4 installation. > > > > Merging or importing pools does not seem to be an option, so I am > > wondering what could be done with the existing tools? I am thinking that I > > could create a config.pl (http://config.pl) that would allow me to run at > > least BackupPC_archiveHost/BackupPC_archiveStart so that I could extract > > backups into an archive. But then there is no facility to import archives, > > or did I overlook anything? Any other suggestions? > > > > Fabian _______________________________________________ BackupPC-users mailing list BackupPC-users@lists.sourceforge.net List: https://lists.sourceforge.net/lists/listinfo/backuppc-users Wiki: https://github.com/backuppc/backuppc/wiki Project: https://backuppc.github.io/backuppc/