John, Thanks for you're input, I'll give it a whirl.
Nick Parker www.developernotes.com On Wed, Sep 8, 2010 at 2:04 PM, John Hendy <jw.he...@gmail.com> wrote: > Nick, > > How about this?? Just fiddled around a little and wonder what you think. > There might be a better way, but essentially, I've done the following: > > - Left y-axis = distance > - Right y-axis = time > - I couldn't get the xtic(1) option to work, so I replaced things with what > I've found to work x:y:xticlabels(col#) > - Beefed up the points to make them a little easier to see > - Used your data to "calibrate" your speed > --- The left y-axis is from 9-21min > --- The right y-axis is from 1.5min - 3.5min > --- This means the axes are 'calibrated' to 10mph > > What does the "calibration" do? It means that at a quick glance you can see > your speed based on a target rate you set: > - if speed/distance are on top of each other, you're right at your target > - if speed (green) is higher than distance (red), you were faster than your > target > - if speed (green) is lower than distance (red), you were slower than your > target > > Resetting your target is as easy as changing (in the code below): > - Time: yrange [y1:y2] > - Distance: y2range [y3:y4] > > All you have to do is make sure that y3/y1 = y4/y2 = target speed > > Also, remove the references to L/R and Red/Green if you'd like from the > labels. I just tried to make the labels as easy as possible to follow so > that no matter where you looked for a reference you would be forced to see > what color/axis matched what value. > > I attached a sample graph. Sorry if I overstepped my bounds -- I realize > it's *your* workout tracker. Take what you like and ditch the rest. I > wanted to know how to do two different y axes anyway so it helped me learn. > Code is here: > > ------------------- gnuplot code ----------------------- > > #+tblname: sessions > | Date | ID | Time | Distance | > |-------------+----+-------+----------| > | 9/1/2010 | 1 | 14:00 | 2.4 | > | 9/2/2010 | 2 | 15:13 | 2.5 | > | 9/10/2010 | 3 | 13:45 | 2.3 | > | 9/11 | 4 | 12:20 | 2.0 | > | Spd > 10mph | 5 | 16:35 | 2.8 | > | Spd = 10mph | 6 | 10 | 1.666 | > | Spd < 10mph | 7 | 20 | 2.8 | > > #+begin_src gnuplot :var data=sessions :file org-running.png :exports both > reset > set title "Running Stats" > set size ratio square > > set xlabel "Date" > set xtics nomirror rotate by -45 > > set yrange [9:21] > set ylabel "Time (min) -- Red" > set ytics nomirror > > set y2range [1.5:3.5] > set y2label "Distance (mi) -- Green" > set y2tics 0,0.5,3.5 > > set style data points > plot data u 2:3:xticlabels(1) axis x1y1 lw 3 title 'Time (L axis)', \ > data u 2:4 axis x2y2 lw 3 title 'Distance (R axis)' > #+end_src > > ------------------- end gnuplot code --------------------- > > > Best regards, > John > > On Wed, Sep 8, 2010 at 11:52 AM, Nick Parker <ni...@developernotes.com>wrote: > >> John, >> >> I am reworking the gnuplot script, it is not done at this point, but this >> is what I currently have: >> >> #+begin_src gnuplot :var data=sessions :file org-running.png :exports both >> set title "Running Stats" >> set xtics nomirror rotate by -45 >> set key noenhanced >> set style data linespoints >> plot "$data" using 2:xtic(1) title columnheader(1), \ >> for [i=2:3] '' using i title columnheader(i) >> #+end_src >> >> Nick Parker >> www.developernotes.com >> >> >> On Wed, Sep 8, 2010 at 9:39 AM, John Hendy <jw.he...@gmail.com> wrote: >> >>> Nick, >>> >>> >>> This got me curious to see the output. I tried to generate it on my >>> computer and get this in the *gnuplot* buffer after running the code: >>> >>> ----- >>> gnuplot> plot data using 1:2:3 notitle >>> ^ >>> warning: Skipping data file with no valid points >>> ^ >>> x range is invalid >>> ----- >>> >>> This is working for you, though? >>> >>> #+tblname: sessions >>> | Date | Time | Distance | >>> |------------+-------+----------| >>> | 09/02/2010 | 15:13 | 2.5 | >>> | 09/01/2010 | 14:00 | 2.4 | >>> >>> #+begin_src gnuplot :var data=sessions :file org-running.png :exports >>> both >>> set title "Running Stats" >>> set auto x >>> set style data histogram >>> set style fill solid border -1 >>> set boxwidth .9 >>> set xlabel "Date" >>> set ylabel "Time" >>> plot data using 1:2:3 notitle >>> #+end_src >>> >>> >>> John >>> >>> On Wed, Sep 8, 2010 at 8:10 AM, Nick Parker <ni...@developernotes.com>wrote: >>> >>>> Erik, >>>> >>>> That was the issue, the :file reference needed to be on the line above. >>>> Thanks. >>>> >>>> >>>> Nick Parker >>>> www.developernotes.com >>>> >>>> >>>> On Tue, Sep 7, 2010 at 10:27 PM, Erik Iverson <er...@ccbr.umn.edu>wrote: >>>> >>>>> On 09/07/2010 10:12 PM, Nick Parker wrote: >>>>> >>>>>> Hi John, >>>>>> >>>>>> I would actually like to plot different lines per distance, each >>>>>> that correlate to a date and elapsed-time (x and y axis respectively). >>>>>> I get an error with the :file notation, though I read that in a >>>>>> sample >>>>>> babel gnuplot example for generating graphs of commit history on the >>>>>> org-mode git repository. I tried to reference the variable data >>>>>> without >>>>>> the quotes and $ sign without any success. I will continue to fiddle >>>>>> with it, I am new to gnuplot. >>>>>> >>>>> >>>>> AFAIK, you can't break source code header argument lines across >>>>> multiple lines. Is that how you actually have it in your >>>>> org file? >>>>> >>>>> >>>>> #+begin_src gnuplot :var data=sessions >>>>>> :file org-running.png :exports both >>>>>> set title "Running Stats" >>>>>> set auto x >>>>>> set style data histogram >>>>>> set style fill solid border -1 >>>>>> set boxwidth .9 >>>>>> set xlabel "Date" >>>>>> set ylabel "Time" >>>>>> plot "$data" using 1:2:3 notitle >>>>>> #+end_src >>>>>> >>>>>> Nick Parker >>>>>> www.developernotes.com <http://www.developernotes.com> >>>>>> >>>>>> >>>>>> _______________________________________________ >>>>>> Emacs-orgmode mailing list >>>>>> Please use `Reply All' to send replies to the list. >>>>>> Emacs-orgmode@gnu.org <mailto:Emacs-orgmode@gnu.org> >>>>>> >>>>>> http://lists.gnu.org/mailman/listinfo/emacs-orgmode >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> _______________________________________________ >>>>>> Emacs-orgmode mailing list >>>>>> Please use `Reply All' to send replies to the list. >>>>>> Emacs-orgmode@gnu.org >>>>>> http://lists.gnu.org/mailman/listinfo/emacs-orgmode >>>>>> >>>>> >>>>> >>>> >>> >> >
_______________________________________________ Emacs-orgmode mailing list Please use `Reply All' to send replies to the list. Emacs-orgmode@gnu.org http://lists.gnu.org/mailman/listinfo/emacs-orgmode
