Give me a couple of days, and I'll post the pertinent information.
Unfortunately, the engineer who worked on this is "stuck" at the ISA show in
Houston.
Mark Dumond
mailto:[EMAIL PROTECTED]
Senior Applications Engineer
FeedForward, Inc.
1341 Canton Road, Suite H1
Marietta, GA 30066
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Glen Bounds
Sent: Wednesday, September 12, 2001 2:46 PM
To: Foxboro DCS Mail List
Subject: Re: PLC Question
I for one would be interested in some more detailed information.
I have asked Foxboro about this for a couple of years now with
no results.
Glen Bounds
[EMAIL PROTECTED]
Corn Products International
----- Original Message -----
> Foxboro does not yet endorse connectivity to ControlLogix.
>
> We (FeedForward, a Foxboro Systems Integrator) have, however, successfully
> integrated the two for one of our customers.
> I was not directly involved with this project, but from my understanding,
it
> requires no more than entering the correct (but not intuitively obvious)
> parameters in the ABSCAN blocks, and also requires the setup of aliases in
> the ControlLogix processor.
>
> If you are interested, let me know and I can get you more detailed
> information by prodding a couple of co-workers.
>
>
> Mark Dumond
> mailto:[EMAIL PROTECTED]
> Senior Applications Engineer
> FeedForward, Inc.
> 1341 Canton Road, Suite H1
> Marietta, GA 30066
>
>
> -----Original Message-----
> We have the 51A series of APs and WPs running 6.1.1 I/A software. We have
> installed several AB30 Gateways that use KF2 modules for the AB interface
to
> PLC5s. Now, we are considering to install a ControLogix PLC. Does anyone
> have experience with this type of set up?
-----------------------------------------------------------------------
This list is neither sponsored nor endorsed by the Foxboro Company. All
postings from this list are the work of list subscribers and no warranty
is made or implied as to the accuracy of any information disseminated
through this medium. By subscribing to this list you agree to hold the
list sponsor(s) blameless for any and all mishaps which might occur due to
your application of information received from this mailing list.
To be removed from this list, send mail to
[EMAIL PROTECTED]
with "unsubscribe foxboro" in the Subject. Or, send any mail to
[EMAIL PROTECTED]
-----------------------------------------------------------------------
This list is neither sponsored nor endorsed by the Foxboro Company. All
postings from this list are the work of list subscribers and no warranty
is made or implied as to the accuracy of any information disseminated
through this medium. By subscribing to this list you agree to hold the
list sponsor(s) blameless for any and all mishaps which might occur due to
your application of information received from this mailing list.
To be removed from this list, send mail to
[EMAIL PROTECTED]
with "unsubscribe foxboro" in the Subject. Or, send any mail to
[EMAIL PROTECTED]
