Re: foxpai.cfg and fastest_rsr There is a brief description of "fastest_rsr" in the QF990084 and how you can change it. I have used this variable with FoxAPI. The deafult value is 1 (means 1/2 seconds), every steps means 1/2 sec, i.e., if fastest_rsr = 10, that means 5 seconds. I am not sure if this parameters modify the historian scan rate (neither legacy nor AIM*)
Re: Historian Upgrade I don't remenber why, but I think that you can get some problems if you try to just recommit. On version 4.3 we commit the station twice: First remove the historian and then install again with the new size. Regards, Alexander Millan Automation Enginneer PDVSA El Palito Refnery Phone: +58-242-3603461 Fax: +58-242-3604766 *************** PDVSA´S INTERNET E-MAIL USE *************** This message may contain information solely of the interest of PDVSA or its businesses. Copying, distribution, disclosure or any use of the information contained in this transmission is permitted only to authorized parties. If you have received this e-mail by error, please destroy it and notify [EMAIL PROTECTED] or the sender by reply email. ****** USO DEL CORREO ELECTRONICO DE PDVSA HACIA INTERNET ****** Esta nota puede contener informacion de interes solo para PDVSA o sus negocios. Solo esta permitida su copia, distribucion o uso a personas autorizadas. Si recibio esta nota por error, por favor destruyala y notifique al remitente o a [EMAIL PROTECTED] ----------------------------------------------------------------------- This list is neither sponsored nor endorsed by the Foxboro Company. All postings from this list are the work of list subscribers and no warranty is made or implied as to the accuracy of any information disseminated through this medium. By subscribing to this list you agree to hold the list sponsor(s) blameless for any and all mishaps which might occur due to your application of information received from this mailing list. To be removed from this list, send mail to [EMAIL PROTECTED] with "unsubscribe foxboro" in the Subject. Or, send any mail to [EMAIL PROTECTED]