Re: [ivtv-devel] pci_find_slot failure patch

[hydrateordie]

I'm having trouble getting my PVR-150 to work with ivtv...  All I get is black static, and I have no sound when I run  # /usr/lib/ivtv/ptune-ui.pl & # mplayer -vo xv /dev/video0 I've been following the Fedora Core Myth guide at http://wilsonet.com/mythtv/fcmyth.php I'm on NTSC and I did cp HcwMakoA.ROM /lib/modules to install the audio firmware from the Hauppage cd. The /etc/modprob.conf details are:  # ivtv (PVR-150) alias char-major-81 videodev alias char-major-81-0 ivtv alias tveeprom tveeprom-ivtv alias tuner tuner-ivtv alias msp3400 msp3400-ivtv and here's the output from  tac /var/log/messages | sed -n '/=\ \ END INIT IVTV\ \ =/,/= START INIT IVTV =/p;     /= START INIT IVTV =/q' | tac Jul 26 12:02:51 localhost kernel: ivtv: ==================== START INIT IVTV ==================== Jul 26 12:02:51 localhost kernel: ivtv: version 0.3.7 (a) loading Jul 26 12:02:51 localhost kernel: ivtv: Linux version: 2.6.12-1.1398_FC4 686 REGPARM 4KSTACKS gcc-4.0 Jul 26 12:02:51 localhost kernel: ivtv: In case of problems please include the debug info Jul 26 12:02:51 localhost kernel: ivtv: between the START INIT IVTV and END INIT IVTV lines when Jul 26 12:02:51 localhost kernel: ivtv: mailing the ivtv-devel mailinglist. Jul 26 12:02:51 localhost kernel: ivtv: Autodetected WinTV PVR 150 card Jul 26 12:02:51 localhost kernel: ivtv: Found an iTVC16 based chip Jul 26 12:02:51 localhost kernel: ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 Jul 26 12:02:51 localhost kernel: ivtv: Unreasonably low latency timer, setting to 64 (was 32) Jul 26 12:02:51 localhost kernel: ivtv: VIA PCI device: 0x3205 vendor: 0x1106 Jul 26 12:02:51 localhost kernel: ivtv: Failed to load module tveeprom Jul 26 12:02:51 localhost kernel: ivtv: i2c client addr: 0x50 not found for command 0x0! Jul 26 12:02:51 localhost kernel: ivtv: Error -19 reading Hauppauge eeprom. Jul 26 12:02:51 localhost kernel: ivtv: Possible causes: the tveeprom module was not loaded, or Jul 26 12:02:51 localhost kernel: ivtv: the eeprom kernel module was loaded before the tveeprom module. Jul 26 12:02:51 localhost kernel: ivtv: Failed to load module tuner Jul 26 12:02:52 localhost kernel: cx25840: requesting /lib/modules/HcwMakoA.ROM Jul 26 12:02:53 localhost kernel: cx25840: firmware loaded Jul 26 12:02:53 localhost kernel: ivtv: i2c attach [client=cx25840[50],ok] Jul 26 12:02:53 localhost kernel: ivtv: i2c attach [client=wm8775[50],ok] Jul 26 12:02:53 localhost kernel: ivtv: Could not detect tuner standard, defaulting to NTSC. Jul 26 12:02:54 localhost kernel: ivtv: Encoder revision: 0x02050032 Jul 26 12:02:54 localhost kernel: ivtv: Encoder Firmware may be buggy, use version 0x02040011 Jul 26 12:02:54 localhost kernel: ivtv: Configuring WinTV PVR 150 card with 4 streams Jul 26 12:02:54 localhost kernel: ivtv: Registered v4l2 device for encoder MPEG minor 0 Jul 26 12:02:54 localhost kernel: ivtv: Create DMA encoder MPEG stream: 0 x 32768 buffers (0KB total) Jul 26 12:02:54 localhost kernel: ivtv: Registered v4l2 device for encoder YUV minor 32 Jul 26 12:02:54 localhost kernel: ivtv: Create DMA encoder YUV stream: 0 x 10800 buffers (0KB total) Jul 26 12:02:54 localhost kernel: ivtv: Registered v4l2 device for encoder VBI minor 224 Jul 26 12:02:54 localhost kernel: ivtv: Create DMA encoder VBI stream: 0 x 8736 buffers (0KB total) Jul 26 12:02:54 localhost kernel: ivtv: Registered v4l2 device for encoder PCM audio minor 24 Jul 26 12:02:54 localhost kernel: ivtv: Create DMA encoder PCM audio stream: 0 x 4608 buffers (0KB total) Jul 26 12:02:54 localhost kernel: ivtv: i2c client id: 0x02 not found! Jul 26 12:02:54 localhost kernel: ivtv: Switching standard to NTSC. Jul 26 12:02:54 localhost kernel: ivtv: i2c client id: 0x02 not found! Jul 26 12:02:54 localhost kernel: ivtv: i2c client addr: 0x43 not found for command 0x40307603! Jul 26 12:02:54 localhost kernel: ivtv: Initialized WinTV PVR 150, card #0 Jul 26 12:02:54 localhost kernel: ivtv: ====================  END INIT IVTV  ==================== I've hit a wall, and I'm pretty much stuck as to what I should try.  Thank you all very much! -KG