Hi! I have a X86 system with a PVR-150, non MCE PAL. I'm running a 2.6.11 kernel and ivtv-0.3.7a.
Yesterday I got it working for the first time. Today when I booted the machine it won't work anymore.. I have tested the following: Boot the machine modprobe ivtv (seems to success, the attached log) ptune.pl --channel SE11 --freqtable pal-europe-west When I run ptune the output is Ch.SE11: 231250 3700 When I check the dmesg I got the following debug-prints: cx25840: decoder disable output ivtv: i2c client addr: 0x43 not found for command 0x40047405! ivtv: i2c client addr: 0x43 not found for command 0x402c5639! cx25840: decoder enable output cx25840: decoder set norm PAL cx25840: decoder set input (6) cx25840: now setting Tuner input cx25840: set audio input (0) ivtv: No Free Mailbox for cmd 0x000000d2 after 100 tries! ivtv: Mailbox[0] 0x000000d3 flags 0x00000003 ivtv: Mailbox[1] 0x00620062 flags 0x00620062 ivtv: Mailbox[2] 0x00620062 flags 0x00620062 ivtv: Firmware UNRESPONSIVE when trying cmd 0x000000d2!!! ivtv: i2c client addr: 0x43 not found for command 0x40047405! Any suggestions? Any help is very appriciated! Best Regards Richard
ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.3.7 (a) loading ivtv: Linux version: 2.6.11-myth 686 gcc-4.0 ivtv: In case of problems please include the debug info ivtv: between the START INIT IVTV and END INIT IVTV lines when ivtv: mailing the ivtv-devel mailinglist. ivtv: User specified WinTV PVR 150 card ivtv: Found an iTVC16 based chip ACPI: PCI interrupt 0000:02:0d.0[A] -> GSI 21 (level, low) -> IRQ 209 ivtv: XXX PCI device: 0x2570 vendor: 0x8086 tveeprom: tveeprom_attach_adapter: id 0x10005 tveeprom: tveeprom_detect_client: id 0x10005 @ 0xa0 ivtv: i2c attach [client=tveeprom,ok] tveeprom: tveeprom_read tveeprom: tveeprom_hauppauge_analog tveeprom: processing pos = 00 (84, 09) tveeprom: 9 [04] <6>tveeprom: 20 <6>tveeprom: 77 <6>tveeprom: 00 <6>tveeprom: 40 <6>tveeprom: ad <6>tveeprom: 56 <6>tveeprom: 78 <6>tveeprom: 00 <6>tveeprom: tveeprom: processing pos = 0c (73, 05) tveeprom: 3 [05] <6>tveeprom: 24 <6>tveeprom: 00 <6>tveeprom: tveeprom: processing pos = 10 (84, 08) tveeprom: 8 [06] <6>tveeprom: b2 <6>tveeprom: 65 <6>tveeprom: 00 <6>tveeprom: 00 <6>tveeprom: 57 <6>tveeprom: 16 <6>tveeprom: 8d <6>tveeprom: tveeprom: processing pos = 1b (72, 07) tveeprom: 2 [07] <6>tveeprom: 70 <6>tveeprom: tveeprom: Not sure what to do with tag [07] tveeprom: processing pos = 1e (73, 09) tveeprom: 3 [09] <6>tveeprom: 1d <6>tveeprom: 36 <6>tveeprom: tveeprom: Not sure what to do with tag [09] tveeprom: processing pos = 22 (73, 0a) tveeprom: 3 [0a] <6>tveeprom: 44 <6>tveeprom: 61 <6>tveeprom: tveeprom: processing pos = 26 (73, 0b) tveeprom: 3 [0b] <6>tveeprom: 4f <6>tveeprom: 30 <6>tveeprom: tveeprom: Not sure what to do with tag [0b] tveeprom: processing pos = 2a (72, 0f) tveeprom: 2 [0f] <6>tveeprom: 03 <6>tveeprom: tveeprom: Not sure what to do with tag [0f] tveeprom: processing pos = 2d (72, 10) tveeprom: 2 [10] <6>tveeprom: 01 <6>tveeprom: tveeprom: Not sure what to do with tag [10] tveeprom: processing pos = 30 (72, 11) tveeprom: 2 [11] <6>tveeprom: 00 <6>tveeprom: tveeprom: Not sure what to do with tag [11] tveeprom: processing pos = 33 (79, 04) tveeprom: Hauppauge: model = 26034, rev = C197, serial# = 7886509 tveeprom: tuner = <unknown> (idx = 97, type = 0) tveeprom: tuner fmt = PAL(D/K) (eeprom = 0x44, v4l2 = 0x00000e07) tveeprom: audio_processor = MSP3400C (type = 4) ivtv: Tuner Type 0, Tuner formats 0x00000e07, Radio: yes, Model 0x008d1657, Revision 0xc02bc30e ivtv: Radio detected tuner: Ignoring new-style parameters in presence of obsolete ones tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 ivtv: i2c attach [client=(tuner unset),ok] cx25840: starting probe on adapter ivtv i2c driver #0 (0x10005) cx25840: detecting cx25840 client on address 0x88 cx25840: cx25843-23 found. Initializing... cx25840: requesting /lib/modules/HcwMakoA.ROM cx25840: firmware loaded ivtv: i2c attach [client=cx25840[50],ok] ivtv: i2c attach [client=wm8775[50],ok] ivtv: Encoder revision: 0x02050032 ivtv: Encoder Firmware may be buggy, use version 0x02040011 ivtv: Configuring WinTV PVR 150 card with 4 streams ivtv: Registered v4l2 device for encoder MPEG minor 0 ivtv: Create DMA encoder MPEG stream: 0 x 32768 buffers (0KB total) ivtv: Registered v4l2 device for encoder YUV minor 32 ivtv: Create DMA encoder YUV stream: 0 x 12960 buffers (0KB total) ivtv: Registered v4l2 device for encoder VBI minor 224 ivtv: Create DMA encoder VBI stream: 0 x 12740 buffers (0KB total) ivtv: Registered v4l2 device for encoder PCM audio minor 24 ivtv: Create DMA encoder PCM audio stream: 0 x 4608 buffers (0KB total) ivtv: Setting Tuner 55 tuner: type set to 55 (LG PAL (TAPE series)) by ivtv i2c driver #0 cx25840: decoder set norm PAL cx25840: decoder set input (6) cx25840: now setting Tuner input ivtv: ivtv_enc_thread: pid = 3698, itv = 0xe0ce8ae0 ivtv: ivtv_enc_vbi_thread: pid = 3699, itv = 0xe0ce8ae0 cx25840: set audio input (0) ivtv: Switching standard to PAL. ivtv: i2c client addr: 0x43 not found for command 0x40307603! cx25840: decoder set norm PAL ivtv: Initialized WinTV PVR 150, card #0 ivtv: ==================== END INIT IVTV ====================
