Hans Verkuil a écrit :
Hi Hans,
I tested yesterday with version 2693, then 2691, then 2687 has you were
supposing. Any of them works for me, didn't have any sound (but video
seems to be faster with 2693. Maybe it's just an impress.)
I'm sending you the dmesg log. Tell me if you need me to test anything
else for you.
PS : I just bought my pvr150, and I tested only 0.3.7h, 0.3.8, and these
versions. But a friend of me said that sound works only with 0.3.7a.
I'll verify that later.
Please do! It would be an interesting result if sound worked in that version.
Hans
-------------------------------------------------------
SF.Net email is sponsored by:
Tame your development challenges with Apache's Geronimo App Server.
Download it for free - -and be entered to win a 42" plasma tv or your very
own Sony(tm)PSP. Click here to play: http://sourceforge.net/geronimo.php
_______________________________________________
ivtv-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ivtv-devel
Ok, I tested with 0.3.7a. Without and with options, any change it
doesn't work :-/
modprobe.conf :
options tda9887 secam=L
options msp3400 amsound=1
options ivtv ivtv_std=3 tuner=38 tda9887=0
Here's my dmesg :
tuner: Ignoring new-style parameters in presence of obsolete ones
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.3.7 (a) loading
ivtv: Linux version: 2.6.13.2-ARCH SMP preempt K7 gcc-3.4
ivtv: In case of problems please include the debug info
ivtv: between the START INIT IVTV and END INIT IVTV lines when
ivtv: mailing the ivtv-devel mailinglist.
ivtv: Autodetected WinTV PVR 150 card
ivtv: Found an iTVC16 based chip
ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
ACPI: PCI Interrupt 0000:01:09.0[A] -> Link [APC2] -> GSI 17 (level,
high) -> IRQ 17
ivtv: Unreasonably low latency timer, setting to 64 (was 32)
ivtv: XXX PCI device: 0x01e0 vendor: 0x10de
cx25840: starting probe on adapter ivtv i2c driver #0 (0x10005)
cx25840: detecting cx25840 client on address 0x88
cx25840: cx25842-23 found. Initializing...
cx25840: requesting /lib/modules/HcwMakoA.ROM
cx25840: firmware loaded
ivtv: i2c attach [client=cx25840[50],ok]
tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
ivtv: i2c attach [client=(tuner unset),ok]
tda9885/6/7: chip found @ 0x86
ivtv: i2c attach [client=tda9887,ok]
tveeprom: Hauppauge: model = 26039, rev = C1A5, serial# = 8202656
tveeprom: tuner = <unknown> (idx = 105, type = 4)
tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L) PAL(D/K) (eeprom =
0x74, v4l2 = 0x00400e17)
tveeprom: audio_processor = MSP3400C (type = 4)
ivtv: i2c attach [client=tveeprom[50],ok]
ivtv: Tuner Type 4, Tuner formats 0x00400e17, Radio: yes, Model
0x008d1855, Revision 0x00000000
ivtv: Radio detected
ivtv: i2c attach [client=wm8775[50],ok]
ivtv: Encoder revision: 0x02050032
ivtv: Encoder Firmware may be buggy, use version 0x02040011
ivtv: Configuring WinTV PVR 150 card with 5 streams
ivtv: Registered v4l2 device for encoder MPEG minor 0
ivtv: Create DMA encoder MPEG stream: 0 x 32768 buffers (0KB total)
ivtv: Registered v4l2 device for encoder YUV minor 32
ivtv: Create DMA encoder YUV stream: 0 x 12960 buffers (0KB total)
ivtv: Registered v4l2 device for encoder VBI minor 224
ivtv: Create DMA encoder VBI stream: 0 x 12740 buffers (0KB total)
ivtv: Registered v4l2 device for encoder PCM audio minor 24
ivtv: Create DMA encoder PCM audio stream: 0 x 4608 buffers (0KB total)
ivtv: Registered v4l2 device for encoder radio minor 64
ivtv: Create encoder radio stream
ivtv: Setting Tuner 38
tuner: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) by ivtv
i2c driver #0
cx25840: decoder set norm SECAM
cx25840: decoder set input (6)
cx25840: now setting Tuner input
cx25840: set audio input (0)
ivtv: Switching standard to SECAM.
cx25840: decoder set norm SECAM
ivtv: Initialized WinTV PVR 150, card #0
ivtv: ==================== END INIT IVTV ====================
ivtv: ivtv_enc_thread: pid = 2888, itv = 0xf8f03ea0
ivtv: ivtv_enc_vbi_thread: pid = 2889, itv = 0xf8f03ea0
i2c_adapter i2c-1: nForce2 SMBus adapter at 0x5000
i2c_adapter i2c-2: nForce2 SMBus adapter at 0x5500
ivtv: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
ivtv: Setup VBI API header 0x0000bd0d pkts 1 buffs 4 ln 36 sz 1444
ivtv: Setup VBI start 0x002fea04 frames 4 fpi 1 lines 0x00000140
cx25840: decoder disable output
cx25840: decoder enable output
cx25840: decoder set norm SECAM
cx25840: decoder set input (6)
cx25840: now setting Tuner input
cx25840: set audio input (0)
cx25840: decoder disable output
cx25840: decoder enable output
cx25840: decoder set norm SECAM
cx25840: decoder set input (6)
cx25840: now setting Tuner input
cx25840: set audio input (0)
ivtv: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
ivtv: Setup VBI API header 0x0000bd0d pkts 1 buffs 4 ln 36 sz 1444
ivtv: Setup VBI start 0x002fea04 frames 4 fpi 1 lines 0x00000140
cx25840: decoder disable output
cx25840: decoder enable output
cx25840: decoder set norm SECAM
cx25840: decoder set input (6)
cx25840: now setting Tuner input
cx25840: set audio input (0)
-------------------------------------------------------
SF.Net email is sponsored by:
Tame your development challenges with Apache's Geronimo App Server.
Download it for free - -and be entered to win a 42" plasma tv or your very
own Sony(tm)PSP. Click here to play: http://sourceforge.net/geronimo.php
_______________________________________________
ivtv-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ivtv-devel
