Hi Hans,
I tested yesterday with version 2693, then 2691, then 2687 has you were
supposing. Any of them works for me, didn't have any sound (but video
seems to be faster with 2693. Maybe it's just an impress.)
I'm sending you the dmesg log. Tell me if you need me to test anything
else for you.
PS : I just bought my pvr150, and I tested only 0.3.7h, 0.3.8, and these
versions. But a friend of me said that sound works only with 0.3.7a.
I'll verify that later.
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.3.9 (development svn snapshot revision 2687) loading
ivtv: Linux version: 2.6.13.2-ARCH SMP preempt K7 gcc-3.4
ivtv: In case of problems please include the debug info
ivtv: between the START INIT IVTV and END INIT IVTV lines when
ivtv: mailing the ivtv-devel mailinglist.
ivtv: Autodetected WinTV PVR 150 card (iTVC16 based)
ACPI: PCI Interrupt 0000:01:09.0[A] -> Link [APC2] -> GSI 17 (level,
high) -> IRQ 20
tveeprom: Hauppauge: model = 26039, rev = C1A5, serial# = 8202656
tveeprom: tuner = <unknown> (idx = 105, type = 4)
tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L) PAL(D/K) (eeprom =
0x74, v4l2 = 0x00400e17)
tveeprom: audio processor = CX25842 (type = 24)
tveeprom: decoder processor = CX25842 (type = 1d)
ivtv: i2c attach to card #0 ok [client=tveeprom[50], addr=50]
tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
ivtv: i2c attach to card #0 ok [client=(tuner unset), addr=61]
cx25840: loading /lib/modules/HcwMakoA.ROM
ivtv: i2c attach to card #0 ok [client=cx25840, addr=44]
ivtv: i2c attach to card #0 ok [client=wm8775, addr=1b]
tda9885/6/7: chip found @ 0x86
ivtv: i2c attach to card #0 ok [client=tda9887, addr=43]
ivtv: loading /lib/modules/ivtv-fw-enc.bin
ivtv: Encoder revision: 0x02050032
ivtv warning: Encoder Firmware can be buggy, use version 0x02040011!!!!
ivtv: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
ivtv: Allocate DMA encoder YUV stream: 161 x 12960 buffers (2048KB total)
ivtv: Allocate DMA encoder VBI stream: 80 x 26208 buffers (2048KB total)
ivtv: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB
total)
tuner: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) by ivtv
i2c driver #0
ivtv: Initialized WinTV PVR 150, card #0
ivtv: ==================== END INIT IVTV ====================
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.3.9 (development svn snapshot revision 2691) loading
ivtv: Linux version: 2.6.13.2-ARCH SMP preempt K7 gcc-3.4
ivtv: In case of problems please include the debug info
ivtv: between the START INIT IVTV and END INIT IVTV lines when
ivtv: mailing the ivtv-devel mailinglist.
ivtv: Autodetected WinTV PVR 150 card (iTVC16 based)
ACPI: PCI Interrupt 0000:01:09.0[A] -> Link [APC2] -> GSI 17 (level,
high) -> IRQ 20
tveeprom: Hauppauge: model = 26039, rev = C1A5, serial# = 8202656
tveeprom: tuner = <unknown> (idx = 105, type = 4)
tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L) PAL(D/K) (eeprom =
0x74, v4l2 = 0x00400e17)
tveeprom: audio processor = CX25842 (type = 24)
tveeprom: decoder processor = CX25842 (type = 1d)
ivtv: i2c attach to card #0 ok [client=tveeprom[50], addr=50]
tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
ivtv: i2c attach to card #0 ok [client=(tuner unset), addr=61]
cx25840: loading /lib/modules/HcwMakoA.ROM
ivtv: i2c attach to card #0 ok [client=cx25840, addr=44]
ivtv: i2c attach to card #0 ok [client=wm8775, addr=1b]
tda9885/6/7: chip found @ 0x86
ivtv: i2c attach to card #0 ok [client=tda9887, addr=43]
ivtv: loading /lib/modules/ivtv-fw-enc.bin
ivtv: Encoder revision: 0x02050032
ivtv warning: Encoder Firmware can be buggy, use version 0x02040011!!!!
ivtv: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
ivtv: Allocate DMA encoder YUV stream: 161 x 12960 buffers (2048KB total)
ivtv: Allocate DMA encoder VBI stream: 80 x 26208 buffers (2048KB total)
ivtv: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB
total)
tuner: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) by ivtv
i2c driver #0
ivtv: Initialized WinTV PVR 150, card #0
ivtv: ==================== END INIT IVTV ====================
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.3.9 (development svn snapshot revision 2693) loading
ivtv: Linux version: 2.6.13.2-ARCH SMP preempt K7 gcc-3.4
ivtv: In case of problems please include the debug info
ivtv: between the START INIT IVTV and END INIT IVTV lines when
ivtv: mailing the ivtv-devel mailinglist.
ivtv: Autodetected WinTV PVR 150 card (iTVC16 based)
ACPI: PCI Interrupt 0000:01:09.0[A] -> Link [APC2] -> GSI 17 (level,
high) -> IRQ 20
ivtv: i2c attach to card #0 ok [client=wm8775, addr=1b]
tveeprom: Hauppauge: model = 26039, rev = C1A5, serial# = 8202656
tveeprom: tuner = <unknown> (idx = 105, type = 4)
tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L) PAL(D/K) (eeprom =
0x74, v4l2 = 0x00400e17)
tveeprom: audio processor = CX25842 (type = 24)
tveeprom: decoder processor = CX25842 (type = 1d)
ivtv: i2c attach to card #0 ok [client=tveeprom[50], addr=50]
tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
ivtv: i2c attach to card #0 ok [client=(tuner unset), addr=61]
cx25840: loading /lib/modules/HcwMakoA.ROM
ivtv: i2c attach to card #0 ok [client=cx25840, addr=44]
tda9885/6/7: chip found @ 0x86
ivtv: i2c attach to card #0 ok [client=tda9887, addr=43]
ivtv: loading /lib/modules/ivtv-fw-enc.bin
ivtv: Encoder revision: 0x02050032
ivtv warning: Encoder Firmware can be buggy, use version 0x02040011!!!!
ivtv: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
ivtv: Allocate DMA encoder YUV stream: 161 x 12960 buffers (2048KB total)
ivtv: Allocate DMA encoder VBI stream: 80 x 26208 buffers (2048KB total)
ivtv: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB
total)
tuner: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) by ivtv
i2c driver #0
ivtv: Initialized WinTV PVR 150, card #0
ivtv: ==================== END INIT IVTV ====================
Hans Verkuil a écrit :
Scott,
Can you also test the released 0.3.8 driver? This is interesting information.
Hans
On Tuesday 20 September 2005 06:11, Scott Harris wrote:
Scott,
Can you go back one revision to rev 2691 and try again? If
that fails, go back to 2687 and try that.
That gives me the info I need to figure out what is going on.
I'll also mail you my audio firmware (I'm using an older
version, haven't tested yet with the new one). You can test
that too to see if it makes any difference.
Thanks,
Testing:
Checked out revision 2691
make ; make install ; depmod -a; shutdown
pull power plug, hit power button a few times, wait a few minutes
plug back in, boot up
no sound
cycled through all the -q 0-5 to see if any other had sound, none did
Checked out revision 2687.
make ; make install ; depmod -a ; shutdown
pull power plug, hit power button a few times, wait a few minutes
plug back in, boot up
no sound
cycled through all the -q 0-5 to see if any other had sound, none did
Next test, ROM file you sent me
I tried this with svn V 2693, 2691 and 2687
Same motions, no sound.
So then I got really desperate and found I had an old tar'ed version on my
system,
0.3.7k. Installed it, and put my old ROM back into place and all works
fine.
Very strange. Volume is low (of course)
I hope this helps.
Scott
-------------------------------------------------------
SF.Net email is sponsored by:
Tame your development challenges with Apache's Geronimo App Server.
Download it for free - -and be entered to win a 42" plasma tv or your very
own Sony(tm)PSP. Click here to play: http://sourceforge.net/geronimo.php
_______________________________________________
ivtv-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ivtv-devel
-------------------------------------------------------
SF.Net email is sponsored by:
Tame your development challenges with Apache's Geronimo App Server.
Download it for free - -and be entered to win a 42" plasma tv or your very
own Sony(tm)PSP. Click here to play: http://sourceforge.net/geronimo.php
_______________________________________________
ivtv-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ivtv-devel
-------------------------------------------------------
SF.Net email is sponsored by:
Tame your development challenges with Apache's Geronimo App Server.
Download it for free - -and be entered to win a 42" plasma tv or your very
own Sony(tm)PSP. Click here to play: http://sourceforge.net/geronimo.php
_______________________________________________
ivtv-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ivtv-devel
