Selon Hans Verkuil <[EMAIL PROTECTED]>:
> On Tuesday 20 September 2005 09:21, Guillaume Lecocq wrote:
> > Hi Hans,
> >
> > I tested yesterday with version 2693, then 2691, then 2687 has you were
> > supposing. Any of them works for me, didn't have any sound (but video
> > seems to be faster with 2693. Maybe it's just an impress.)
> >
> > I'm sending you the dmesg log. Tell me if you need me to test anything
> > else for you.
> >
> > PS : I just bought my pvr150, and I tested only 0.3.7h, 0.3.8, and these
> > versions. But a friend of me said that sound works only with 0.3.7a.
> > I'll verify that later.
> >
> > ivtv: ==================== START INIT IVTV ====================
> > ivtv: version 0.3.9 (development svn snapshot revision 2687) loading
> > ivtv: Linux version: 2.6.13.2-ARCH SMP preempt K7 gcc-3.4
> > ivtv: In case of problems please include the debug info
> > ivtv: between the START INIT IVTV and END INIT IVTV lines when
> > ivtv: mailing the ivtv-devel mailinglist.
> > ivtv: Autodetected WinTV PVR 150 card (iTVC16 based)
> > ACPI: PCI Interrupt 0000:01:09.0[A] -> Link [APC2] -> GSI 17 (level,
> > high) -> IRQ 20
> > tveeprom: Hauppauge: model = 26039, rev = C1A5, serial# = 8202656
> > tveeprom: tuner = <unknown> (idx = 105, type = 4)
> > tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L) PAL(D/K) (eeprom =
>
> Hi Guillaume,
>
> I'm so focused on other sound problems that I missed the obvious one here:
> your tuner is unknown. It reads index number 105 from the eeprom, but that's
> so new that we don't have it yet. Can you determine which tuner is on your
> card? Generally you can peel off the Hauppauge label and look what's
> underneath.
>
> Thanks,
>
> Hans
>
>
> -------------------------------------------------------
> SF.Net email is sponsored by:
> Tame your development challenges with Apache's Geronimo App Server.
> Download it for free - -and be entered to win a 42" plasma tv or your very
> own Sony(tm)PSP. Click here to play: http://sourceforge.net/geronimo.php
> _______________________________________________
> ivtv-devel mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/ivtv-devel
>
Hi Hans,
I was searching this way too, and I fonud something in the mailing list. And
according to this, I found a way to make my sound works :)
In fact, I used the 2693 version with options tda9887 secam=L debug=3 port1=0
port2=0
They were saying that port1=0 and port2=0 could solve some problem, and it is
for me.
I don't know exactly which tuner is, but it's maybe the same has usual.
I forgot to mention that I live in France, so SECAM=L :)
I think I'll try now with other version, 2691 and 2687.
Here my dmesg, debug part is at the end. :
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.3.9 (development svn snapshot revision 2693) loading
ivtv: Linux version: 2.6.13.2-ARCH SMP preempt K7 gcc-3.4
ivtv: In case of problems please include the debug info
ivtv: between the START INIT IVTV and END INIT IVTV lines when
ivtv: mailing the ivtv-devel mailinglist.
ivtv: Autodetected WinTV PVR 150 card (iTVC16 based)
ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
ACPI: PCI Interrupt 0000:01:09.0[A] -> Link [APC2] -> GSI 17 (level, high) ->
IRQ 17
ivtv: Unreasonably low latency timer, setting to 64 (was 32)
cx25840: loading /lib/modules/HcwMakoA.ROM
ivtv: i2c attach to card #0 ok [client=cx25840, addr=44]
tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
ivtv: i2c attach to card #0 ok [client=(tuner unset), addr=61]
tda9885/6/7: chip found @ 0x86
ivtv: i2c attach to card #0 ok [client=tda9887, addr=43]
tveeprom: Hauppauge: model = 26039, rev = C1A5, serial# = 8202656
tveeprom: tuner = <unknown> (idx = 105, type = 4)
tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L) PAL(D/K) (eeprom = 0x74, v4l2 =
0x00400e17)
tveeprom: audio processor = CX25842 (type = 24)
tveeprom: decoder processor = CX25842 (type = 1d)
ivtv: i2c attach to card #0 ok [client=tveeprom[50], addr=50]
ivtv: i2c attach to card #0 ok [client=wm8775, addr=1b]
ivtv: loading /lib/modules/ivtv-fw-enc.bin
ivtv: Encoder revision: 0x02050032
ivtv warning: Encoder Firmware can be buggy, use version 0x02040011!!!!
ivtv: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
ivtv: Allocate DMA encoder YUV stream: 161 x 12960 buffers (2048KB total)
ivtv: Allocate DMA encoder VBI stream: 80 x 26208 buffers (2048KB total)
ivtv: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total)
tuner: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) by ivtv i2c
driver #0
tda9885/6/7: switching to v4l2
tda9885/6/7: insmod fixup: SECAM => SECAM-L
tda9885/6/7: configure for: SECAM-L
tda9885/6/7: writing: b=0x04 c=0x10 e=0x0b
tda9885/6/7: write: byte B 0x04
B0 video mode : sound trap
B1 auto mute fm : no
B2 carrier mode : QSS
B3-4 tv sound/radio : AM/TV
B5 force mute audio: no
B6 output port 1 : low (active)
B7 output port 2 : low (active)
tda9885/6/7: write: byte C 0x10
C0-4 top adjustment : 0 dB
C5-6 de-emphasis : no
C7 audio gain : 0
tda9885/6/7: write: byte E 0x0b
E0-1 sound carrier : 6.5 MHz / AM
E6 l pll ganting : 13
E2-4 video if : 38.9 MHz
E5 tuner gain : normal
E7 vif agc output : pin3+pin22 port
--
tda9885/6/7: read: 0xfc
after power on : no
afc : + 37.5 kHz
fmif level : high
afc window : in
vfi level : high
ivtv: Initialized WinTV PVR 150, card #0
ivtv: ==================== END INIT IVTV ====================
-------------------------------------------------------
SF.Net email is sponsored by:
Tame your development challenges with Apache's Geronimo App Server.
Download it for free - -and be entered to win a 42" plasma tv or your very
own Sony(tm)PSP. Click here to play: http://sourceforge.net/geronimo.php
_______________________________________________
ivtv-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ivtv-devel
