> > > > If it would be super useful, I can do some tests under windows. > > It won't be easy with the way I have things configured with > the dual > > satellite receivers, but possible, so I'd prefer only to destroy > > things if it would be really super useful ;) > > It might come to that, we'll see. I thought you mailed the > ivtv kernel messages in one of your postings, but I can't > find it. Can you mail the IVTV START/END dmesg output? Thanks. > > Hans >
Linux video capture interface: v1.00 ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.3.9 (development svn snapshot revision 2696) loading ivtv: Linux version: 2.6.11-1.14_FC3 686 REGPARM 4KSTACKS gcc-3.4 ivtv: In case of problems please include the debug info ivtv: between the START INIT IVTV and END INIT IVTV lines when ivtv: mailing the ivtv-devel mailinglist. ivtv: Autodetected WinTV PVR 350 card (iTVC15 based) ACPI: PCI interrupt 0000:00:06.0[A] -> GSI 12 (level, low) -> IRQ 12 ivtv: Unreasonably low latency timer, setting to 64 (was 32) ivtv: Failed to load module tveeprom ivtv warning: i2c client addr: 0x50 not found for command 0x0! ivtv: Error -19 reading Hauppauge eeprom. ivtv: Possible causes: the tveeprom module was not loaded, or ivtv: the eeprom kernel module was loaded before the tveeprom module. tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 ivtv: i2c attach to card #0 ok [client=(tuner unset), addr=61] ivtv: i2c attach to card #0 ok [client=saa7115[50], addr=21] saa7127 0-0044: saa7129 found @ 0x88 (ivtv i2c driver #0) ivtv: i2c attach to card #0 ok [client=saa7127, addr=44] msp34xx: ivtv version msp34xx: init: chip=MSP3448W-A2, has NICAM support, simple (D) mode, simpler (G) no-thread mode msp34xx: $Id$ compiled on: Sep 20 2005 19:08:49 ivtv: i2c attach to card #0 ok [client=MSP3448W-A2, addr=40] tda9885/6/7: chip found @ 0x86 ivtv: i2c attach to card #0 ok [client=tda9887, addr=43] ivtv: Could not detect tuner standard, defaulting to NTSC. ivtv: loading /lib/modules/ivtv-fw-enc.bin ivtv: loading /lib/modules/ivtv-fw-dec.bin ivtv: Encoder revision: 0x02040024 ivtv warning: Encoder Firmware can be buggy, use version 0x02040011!!!! ivtv: Decoder revision: 0x02020023 ivtv: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total) ivtv: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total) ivtv: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) ivtv: Create encoder radio stream ivtv: Allocate DMA decoder MPEG stream: 16 x 65536 buffers (1024KB total) ivtv: Allocate DMA decoder VBI stream: 512 x 2048 buffers (1024KB total) ivtv: Create decoder VOUT stream ivtv: Allocate DMA decoder YUV stream: 24 x 43200 buffers (1024KB total) spurious 8259A interrupt: IRQ7. tuner: tuner type not set ivtv: Initialized WinTV PVR 350, card #0 ivtv: ====================== NEXT CARD ====================== ivtv: Autodetected WinTV PVR 150 card (iTVC16 based) ACPI: PCI interrupt 0000:00:07.0[A] -> GSI 5 (level, low) -> IRQ 5 ivtv: Unreasonably low latency timer, setting to 64 (was 32) tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #1 ivtv: i2c attach to card #1 ok [client=(tuner unset), addr=61] ivtv: Failed to load module tveeprom ivtv warning: i2c client addr: 0x50 not found for command 0x0! ivtv: Error -19 reading Hauppauge eeprom. ivtv: Possible causes: the tveeprom module was not loaded, or ivtv: the eeprom kernel module was loaded before the tveeprom module. cx25840: loading /lib/modules/HcwMakoA.ROM ivtv: i2c attach to card #1 ok [client=cx25840, addr=44] ivtv: i2c attach to card #1 ok [client=wm8775, addr=1b] ivtv: loading /lib/modules/ivtv-fw-enc.bin ivtv: Encoder revision: 0x02040024 ivtv warning: Encoder Firmware can be buggy, use version 0x02040011!!!! ivtv: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total) ivtv: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total) ivtv: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) tuner: tuner type not set ivtv: Initialized WinTV PVR 150, card #1 ivtv: ==================== END INIT IVTV ==================== ivtv-osd: Framebuffer module loaded (attached to ivtv card id 0) ivtv-osd warning: Framebuffer is at decoder-relative address 0x00510000 and has 1704960 bytes. ivtv-osd: screen coords: [0 0] -> [720 480] ivtv-osd: original global alpha = 208 ivtv-osd: current OSD state = 39 ivtv-osd: new global alpha = 208 (1 255 0) ivtv-osd: framebuffer at 0xe1510000, mapped to 0xf9990000, size 1350k ivtv-osd: mode is 720x480x32, linelength=2880 Console: switching to colour frame buffer device 90x30 ivtv-osd: fb0: iTVC15 TV out frame buffer device ivtv: Allocate DMA decoder OSD stream: 16 x 65536 buffers (1024KB total) lirc_dev: IR Remote Control driver registered, at major 61 tveeprom: Hauppauge: model = 48132, rev = K268, serial# = 7734825 tveeprom: tuner = LG TAPE H001F MK3 (idx = 68, type = 47) tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000) tveeprom: audio processor = MSP4448 (type = 1b) tveeprom: decoder processor = SAA7115 (type = 13) ivtv: i2c attach to card #0 ok [client=tveeprom[50], addr=50] tveeprom: Hauppauge: model = 26032, rev = C199, serial# = 7933985 tveeprom: tuner = TCL 2002N 5H (idx = 99, type = 50) tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000) tveeprom: audio processor = CX25841 (type = 23) tveeprom: decoder processor = CX25841 (type = 1c) ivtv: i2c attach to card #1 ok [client=tveeprom[50], addr=50] bttv: disagrees about version of symbol tveeprom_read bttv: Unknown symbol tveeprom_read bttv: disagrees about version of symbol tveeprom_hauppauge_analog bttv: Unknown symbol tveeprom_hauppauge_analog cx2388x v4l2 driver version 0.0.4 loaded lirc_i2c: chip found @ 0x18 (Hauppauge IR) ivtv: i2c attach to card #0 ok [client=Hauppauge IR, addr=18] lirc_dev: lirc_register_plugin: sample_rate: 10 lirc_i2c: chip found @ 0x71 (Hauppauge IR (PVR150)) ivtv: i2c attach to card #1 ok [client=Hauppauge IR (PVR150), addr=71] lirc_dev: lirc_register_plugin: sample_rate: 10 ------------------------------------------------------- SF.Net email is sponsored by: Tame your development challenges with Apache's Geronimo App Server. Download it for free - -and be entered to win a 42" plasma tv or your very own Sony(tm)PSP. Click here to play: http://sourceforge.net/geronimo.php _______________________________________________ ivtv-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/ivtv-devel
