Hi there, I'm using a Kingston 2.0GB SD card with a unbranded card reader (model number UCR-61). When I insert the card, it's detected as device using 512-byte sector sizes, and therefore it only shows up with about 1GB.
I've poked around the mailing list, and I've found that a few other people have mentioned this problem, and the responses to date seems to imply that it's a hardware combination problem rather than a driver problem. http://marc.info/?l=linux-usb-devel&m=117043511923949&w=2 I understand that one of the issues is that certain readers can not properly handle 1024-byte block sizes, but I don't think this is the case here. If I use the same reader-card combination on a Windows machine, the card is recognized as a 2GB device. The device uses usb-storage and libusual modules. Just wanted to report this behavior, that's all! ------------------------------------------------------------------------- This SF.net email is sponsored by: Splunk Inc. Still grepping through log files to find problems? Stop. Now Search log events and configuration files using AJAX and a browser. Download your FREE copy of Splunk now >> http://get.splunk.com/ _______________________________________________ linux-usb-devel@lists.sourceforge.net To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel