On May 22, 2012, at 11:06 , Alexander Osipenko wrote: > The latest working version I have found is: > Firmware: J-Link ARM V8 compiled Feb 8 2012 14:30:39
I did some tests and you are right, the version 4.42c seems fine: Info : J-Link ARM V8 compiled Feb 8 2012 14:30:39 Info : J-Link caps 0xb9ff7bbf Info : J-Link hw version 80000 Info : J-Link hw type J-Link Info : J-Link max mem block 9336 Info : J-Link configuration Info : USB-Address: 0x0 Info : Kickstart power on JTAG-pin 19: 0xffffffff Info : Vref = 3.280 TCK = 1 TDI = 0 TDO = 1 TMS = 0 SRST = 0 TRST = 0 Info : J-Link JTAG Interface ready Info : clock speed 1000 kHz Info : JTAG tap: stm32.cpu tap/device found: 0x3ba00477 (mfg: 0x23b, part: 0xba00, ver: 0x3) Info : JTAG tap: stm32.bs tap/device found: 0x16410041 (mfg: 0x020, part: 0x6410, ver: 0x1) Info : stm32.cpu: hardware has 6 breakpoints, 4 watchpoints the next version, 4.44, no longer works: Info : J-Link initialization started / target CPU reset initiated Info : J-Link ARM V8 compiled Mar 19 2012 10:24:49 Info : J-Link caps 0xb9ff7bbf Info : J-Link hw version 80000 Info : J-Link hw type J-Link Info : J-Link max mem block 9336 Info : J-Link configuration Info : USB-Address: 0x0 Info : Kickstart power on JTAG-pin 19: 0xffffffff Info : Vref = 3.287 TCK = 1 TDI = 1 TDO = 1 TMS = 1 SRST = 0 TRST = 1 Info : J-Link JTAG Interface ready Info : clock speed 1000 kHz Error: JTAG scan chain interrogation failed: all ones Error: Check JTAG interface, timings, target power, etc. Error: Trying to use configured scan chain anyway... Error: stm32.cpu: IR capture error; saw 0x0f not 0x01 Warn : Bypassing JTAG setup events due to errors Warn : Invalid ACK 0x7 in JTAG-DP transaction Polling target failed, GDB will be halted. Polling again in 100ms Polling target failed, GDB will be halted. Polling again in 300ms ... > I have tried versions V4.44d, V4.46e, V4.46f (latest stable). > All of them have identical firmware: > Firmware: J-Link ARM V8 compiled May 3 2012 18:36:22 I don't have time to check now, but I guess 4.44[abc] are also not working, so the latest supported is 4.42c. regards, Liviu p.s. I'm using the 0.5.0 version from MacPorts, running on a Mac OS X Lion. ------------------------------------------------------------------------------ Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ _______________________________________________ OpenOCD-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/openocd-devel
