From the SMSQ/E manual: ---------------------- BAUD The Baud rates supported by SMSQ/E on the QXL are 19200 9600 4800 2400 1200 600 300 If one of the ports is already committed to a mouse, the BAUD command will not affect it. BAUD 19200 set both ports to 19200 BAUD 2,1200 reset SER2 to 1200 baud ----------------------
2017-02-18 16:08 GMT+01:00 Andrea Carpi <inkub...@tiscali.it>: > Il 18/02/2017 14.55, Tobias Fröschle ha scritto: > >> Only on a side note and not really a problem: >> >> MT.BAUD (and the equivalent SMSQ/E trap) is documented to return "ERR.BP" >> on an unsupported baud rate. >> >> "BAUD 9700" on QPC does, however, return "not implemented" >> >> Tobias >> > > Yes, but on QXL any baud rate give the "not implemeted" error > > I'm sure that in the past BAUD works. I used QXL with a modem and QTPI for > many years. > > Andrea > _______________________________________________ > QL-Users Mailing List > _______________________________________________ QL-Users Mailing List