[gentoo-user] inkscape emerge
Hello, I read somewhere that inkscape (in portage) can open and allow some manipulation of Visio files. Anyone got any experience with inkscape and visio files? Emerging inkscape, it required 12 new packages to be install too. What must I do to ensure that when I unemerge inkscape, the other 12 packages are also removed? curiously, James
Re: [gentoo-user] InkScape trouble
Meino Christian Cramer wrote: As normal user I did: # inkscape Ok, InkScape thought, let's crash! BADABOOM! That's it. Funny :) , but I think this is not the error message you're displayed when inkscape crashes... Can you post the true error message and not your,ehm,emotional interpretation? m. -- gentoo-user@gentoo.org mailing list
[gentoo-user] Re: Inkscape-0.48.1-r1 really sloooooow
On 05/22/2011 10:56 AM, Mick wrote: [...] I have now looked a bit more into this problem and it seems that inkscape is slower in MSWindows (dual boot machine). So I concluded that this is an inkscape issue, rather than Gentoo specific. FWIW, Inkscape is quite slow here too. Core 2 Duo 3.4GHz with 6GB RAM.
Re: [gentoo-user] Conflicting version...but the version scheme is confusing...
inkscape-0.92.4 has the same issue. The problem is that the API (Programming interface, not Binary interface) between imagemagick-6 and imagemagick-7 isn't compatible. And inkscape never was updated to use the API from imagemagick-7. That's why you are forced to downgrade imagemagick to a version lower than 7 when you want to use imagemagick in inkscape. If you want to stay with imagemagick >=7 you have two options: 1) entirely disable imagemagick for inkscape, e.g. with "media-gfx/inkscape -imagemagick" in package.use 2) Use inkscape-1.0.0_beta1 and enable both USE-Flags "imagemagick graphicsmagick". That way you will get the imagemagick features through graphicsmagick, which means imagemagick is not a dependency of inkscape anymore. Regards Franz
[gentoo-user] InkScape trouble
Hi, I did: emerge -p -v inkscape which gaves me a couple of lines of output but nothing flagged as source of trouble, nothing, blocked, masked or such... Ok, I thought, let's go! emerge inkscape ...the CPU was glowing hot for a while then...it was ready. As normal user I did: # inkscape Ok, InkScape thought, let's crash! BADABOOM! That's it. Please tell me, what I did so badly wrong here, since anything else I emerge exactly in the same way in the last days, either works well out of the box or failed to compile right in the beginning. (PS: I checked for any config-files of InkScape at home and removed them several times -- no chance) Slightly astonished, mcc -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] InkScape trouble
BADABOOM! That's it. not really. PLease start Inkscape from a terminal emulation and post the output. Best regards ce -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] InkScape trouble
On Sun, 2006-03-26 at 12:46 +, b.n. wrote: Meino Christian Cramer wrote: As normal user I did: # inkscape Ok, InkScape thought, let's crash! BADABOOM! That's it. Funny :) , but I think this is not the error message you're displayed when inkscape crashes... Can you post the true error message and not your,ehm,emotional interpretation? m. Maybe dynamic linking is not consistent on your system: Try # emerge gentoolkit # revdep-rebuild -p # revdep-rebuild Matthias -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Conflicting version...but the version scheme is confusing...
On Saturday, 30 November 2019 07:17:01 GMT Franz Fellner wrote: > inkscape-0.92.4 has the same issue. > The problem is that the API (Programming interface, not Binary interface) > between imagemagick-6 and imagemagick-7 isn't compatible. > And inkscape never was updated to use the API from imagemagick-7. Yes, that's exactly the problem. media-gfx/inkscape-0.92.4 which is presently the stable version is quite happy with media-gfx/imagemagick-7.0.9.5. However, the unstable version of inkscape-1.0_beta1 requires imagemagick versions prior to 7.0.9.5, with the currently available version of imagemagick-6.9.10.74 fulfilling the requirement. The inkscape package is the dog and imagemagick (a dependency) is the tail. Usually the dog wags the tail and not the other way around. However, portage is asking for inkscape to be keyworded to a testing beta version for what appears to me to be no good reason. Portage should keep inkscape at the stable 0.92.4 version, with imagemagick at 6.9.10.74, on a system which is running stable packages. > That's why you are forced to downgrade imagemagick to a version lower than > 7 when you want to use imagemagick in inkscape. > If you want to stay with imagemagick >=7 you have two options: > 1) entirely disable imagemagick for inkscape, e.g. with "media-gfx/inkscape > -imagemagick" in package.use If you do this, you'll find that conversions and imports/exports from one graphics file format to another would be somewhat limited. Imagemagick relies on inkscape for this functionality. > 2) Use inkscape-1.0.0_beta1 and enable both USE-Flags "imagemagick > graphicsmagick". > That way you will get the imagemagick features through graphicsmagick, > which means imagemagick is not a dependency of inkscape anymore. Right, but graphicsmagick is more limited in its functionality than imagemagick. For a poweruser of imagemagick this may present a problem - but I don't know how big a problem it might be. While I was chasing my tail around this clash hoping portage would eventually get it right, I seem to recall a more recent combo. When inkscape-1.0_beta1 is keyworded, portage is asking to also keyword imagemagick-*. I assume the trunk has a version which works with inkscape-1.0_beta1, but I'm not sure. For now I just exclude inkscape from upgrades until the dust on this settles. -- Regards, Mick signature.asc Description: This is a digitally signed message part.
[gentoo-user] Re: Troubles setting USE flag for inkscape
tu...@posteo.de wrote on 25/04/2020 17:55: > Beside other permutations I add this to package.use > > media-gfx/inkscape python_single_target_python3_8 Try this instead: media-gfx/inkscape PYTHON_SINGLE_TARGET: -* python3_8 -- Remy
[gentoo-user] inkscape crashed when open/save file
Hello, everyone! I emerged inkscape recently. The emerging process finished without error-liked output, but, when I try to open or save a SVG file, inkscape crashes with an Internal Error. In the file saving case, the file was saved into disk although a crash had happened. There are some information as following: - MAKEOPTS=-j3 CFLAGS=-O2 -march=prescott -pipe # emerge -pv inkscape These are the packages that would be merged, in order: Calculating dependencies... done! [ebuild R ] media-gfx/inkscape-0.45.1-r1 USE=doc gnome mmx perl -debug -dia -inkjar -jabber -lcms -postscript -spell -wmf 0 kB Total: 1 package (1 reinstall), Size of downloads: 0 kB - Any hint? Thanks. -- gentoo-user@lists.gentoo.org mailing list
[gentoo-user] Troubles setting USE flag for inkscape
Hi, while updateing/emergeing I got this message: ## !!! Problem resolving dependencies for media-gfx/inkscape from @selected ## ## !!! The ebuild selected to satisfy "media-gfx/inkscape" has unmet requirements. ## - media-gfx/inkscape-1.0_rc1::gentoo USE="jpeg nls openmp -cdr -dbus -dia -exif -graphicsmagick -imagemagick -inkjar -jemalloc -lcms -postscript -spell -static-libs -svg2 -visio -wpg" PYTHON_SINGLE_TARGET="python3_6 python3_8 -python3_7" ## ##The following REQUIRED_USE flag constraints are unsatisfied: ## exactly-one-of ( python_single_target_python3_6 python_single_target_python3_7 python_single_target_python3_8 ) Beside other permutations I add this to package.use media-gfx/inkscape python_single_target_python3_8 but the message remains. As far as I know the above is compatible what is written here: https://wiki.gentoo.org/wiki//etc/portage/package.use How do I have to specify the python target correctly? Cheers! Meino
[gentoo-user] sandbox and $HOME
Hi, I am trying to write an ebuild for media-libs/babl- Unfortunately, probably when making docs, it invokes inkscape which wants to access and write to /root/.config/Inkscape which probably comes from $(HOME)/.config/Inkscape This violates the sandbox - see below - What can I do about it? Many thanks for a hint, Helmut. --- ACCESS VIOLATION SUMMARY --- LOG FILE = /var/log/sandbox/sandbox-2363.log VERSION 1.0 FORMAT: F - Function called FORMAT: S - Access Status FORMAT: P - Path as passed to function FORMAT: A - Absolute Path (not canonical) FORMAT: R - Canonical Path FORMAT: C - Command Line F: mkdir S: deny P: /root/.config/Inkscape A: /root/.config/Inkscape R: /root/.config/Inkscape C: /usr/bin/inkscape -e babl-a4poster.png babl-a4poster.svg -w 256 -y 0 2 F: open_wr S: deny P: /root/.config/Inkscape/extension-errors.log A: /root/.config/Inkscape/extension-errors.log R: /root/.config/Inkscape/extension-errors.log C: /usr/bin/inkscape -e babl-a4poster.png babl-a4poster.svg -w 256 -y 0 2 -- Helmut Jarausch Lehrstuhl fuer Numerische Mathematik RWTH - Aachen University D 52056 Aachen, Germany
Re: [gentoo-user] inkscape won't start
On 14/06/09 Ward Poelmans said: Try unmerging app-text/poppler*. It's being replaced by dev-libs/poppler* Ok, after completely rebuilding inkscape, it works now. With warnings mind you (inkscape:25661): Gtk-WARNING **: GtkSpinButton: setting an adjustment with non-zero page size is deprecated (inkscape:25661): Gtk-WARNING **: GtkSpinButton: setting an adjustment with non-zero page size is deprecated (inkscape:25661): Gtk-WARNING **: GtkSpinButton: setting an adjustment with non-zero page size is deprecated (inkscape:25661): Gtk-WARNING **: GtkSpinButton: setting an adjustment with non-zero page size is deprecated Mike -- Michael P. Soulier msoul...@digitaltorque.ca Any intelligent fool can make things bigger and more complex... It takes a touch of genius - and a lot of courage to move in the opposite direction. --Albert Einstein pgp83NJFgJuQY.pgp Description: PGP signature
Re: [gentoo-user] sandbox and $HOME
On Thursday 06 November 2008 13:53:47 Helmut Jarausch wrote: Hi, I am trying to write an ebuild for media-libs/babl- Unfortunately, probably when making docs, it invokes inkscape which wants to access and write to /root/.config/Inkscape which probably comes from $(HOME)/.config/Inkscape This violates the sandbox - see below - What can I do about it? Posting the ebuild you are using would be a good start.. -- alan dot mckinnon at gmail dot com
[gentoo-user] Re: Imagemagick downgrade?
On 10/11/2019 14:51, Mick wrote: Having re-synced portage it now asks me to keyword media-gfx/ inkscape-1.0_beta1 and once I do, portage wants to downgrade media-gfx/ imagemagick from the installed 7.0.8.67 to 6.9.10.67. I'm not sure why imagemagick is asking to be downgraded, or for that matter why inkscape should be keyworded: inkscape-1.0_beta is in testing (~arch) so if your gentoo install is not ~arch, then you need to keyword it. Also, it depends on: that is, a version lower then 7. That's why you need to downgrade to imagemagick 6.
Re: [gentoo-user] Conflicting version...but the version scheme is confusing...
Am Sa., 30. Nov. 2019 um 11:34 Uhr schrieb Mick : > On Saturday, 30 November 2019 07:17:01 GMT Franz Fellner wrote: > > inkscape-0.92.4 has the same issue. > > The problem is that the API (Programming interface, not Binary interface) > > between imagemagick-6 and imagemagick-7 isn't compatible. > > And inkscape never was updated to use the API from imagemagick-7. > > Yes, that's exactly the problem. > > media-gfx/inkscape-0.92.4 which is presently the stable version is quite > happy > with media-gfx/imagemagick-7.0.9.5. > Ah. It's 7.0.8.5, not 7.0.9.5: https://bugs.gentoo.org/663468#c5 Some deprecated features of the API were removed. Unfortunately also the pkgconfig file was renamed to Magick++ which made inkscape silently disable imagemagick support and the compilation failure/incompatibility wasn't noticed for a long time. > However, the unstable version of inkscape-1.0_beta1 requires imagemagick > versions prior to 7.0.9.5, with the currently available version of > imagemagick-6.9.10.74 fulfilling the requirement. > imakemagick-7.0.8.5, again. Not that nobody will stay confused. > > 1) entirely disable imagemagick for inkscape, e.g. with > "media-gfx/inkscape > > -imagemagick" in package.use > > If you do this, you'll find that conversions and imports/exports from one > graphics file format to another would be somewhat limited. Imagemagick > relies > on inkscape for this functionality. > The other way around, inkscape needs imagemagick for such conversions. I don't know how limiting it will be. If all you want to do is create pure vector graphics you are good to go. > 2) Use inkscape-1.0.0_beta1 and enable both USE-Flags "imagemagick > > graphicsmagick". > > That way you will get the imagemagick features through > graphicsmagick, > > which means imagemagick is not a dependency of inkscape anymore. > > Right, but graphicsmagick is more limited in its functionality than > imagemagick. For a poweruser of imagemagick this may present a problem - > but > I don't know how big a problem it might be. You aren't forced to build graphicsmagick as a complete replacement for imagemagick. You only need the C++-API for inkscape and not the commandline tools. Put "media-gfx/graphicsmagick cxx -imagemagick" in your package.use and imagemagick and graphicsmagick can be installed at the same time.
Re: [gentoo-user] InkScape trouble
On 3/26/06, Christoph Eckert [EMAIL PROTECTED] wrote: solfire:/home/mccramerinkscape Emergency save activated! Emergency save completed. Inkscape will close now. If you can reproduce this crash, please file a bug at www.inkscape.org with a detailed description of the steps leading to the crash, so we can fix it. zsh: abort solfire:/home/mccramer Script done on Sun Mar 26 15:11:14 2006 But I fear this say as much as my emotional post previously unfortunately you're right :( . Best regards ce -- gentoo-user@gentoo.org mailing list I've got almost same problem. After removing ~/.inkscape/ error says: [EMAIL PROTECTED] ~ $ inkscape Emergency save activated! *** glibc detected *** free(): invalid pointer: 0x08958250 *** Przerwane (afaik przerwane = segmentation fault) After this I have ~/.inkscape/ with file preferences.xml, and the next error is: [EMAIL PROTECTED] ~ $ inkscape /home/capsel/.inkscape/preferences.xml:2: parser error : Start tag expected, '' not found ^ Emergency save activated! Emergency save completed. Inkscape will close now. If you can reproduce this crash, please file a bug at www.inkscape.org with a detailed description of the steps leading to the crash, so we can fix it. Przerwane (...) I tried to recompile librsvg (mozilla-firefox-bin does not show svg files), glib, gtk+... as I noticed strange display behaviour (cuting or adding pixel lines when scrolling pages). Yesterday I upgraded portage (glibc) but all those errors wasn't fixed. I don't think it is my fault (use flags/cflags) as it all happend after emerge -uDN world, but I can't say exactly when and what was upgraded... Some time ago, 3 months maybe, I had same problem with GTK (don't know about inkscape) on my second machine but 2 weeks I sold it. I had same use flags and cflags as on this machine. Can any one help? -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Troubles setting USE flag for inkscape
> ## !!! Problem resolving dependencies for media-gfx/inkscape from @selected > ## > ## !!! The ebuild selected to satisfy "media-gfx/inkscape" has unmet > requirements. ## - media-gfx/inkscape-1.0_rc1::gentoo USE="jpeg nls openmp > -cdr -dbus -dia -exif -graphicsmagick -imagemagick -inkjar -jemalloc -lcms > -postscript -spell -static-libs -svg2 -visio -wpg" > PYTHON_SINGLE_TARGET="python3_6 python3_8 -python3_7" ## > ##The following REQUIRED_USE flag constraints are unsatisfied: > ## exactly-one-of ( python_single_target_python3_6 > python_single_target_python3_7 python_single_target_python3_8 ) is fixed now and should work out of the box again -- Andreas K. Hüttel dilfri...@gentoo.org Gentoo Linux developer (council, qa, toolchain, base-system, perl, libreoffice) signature.asc Description: This is a digitally signed message part.
[gentoo-user] inkscape crash
Inkscape crashes on me whenever I select Text-Text and Font... Anyone know what to do to fix this? As far as I can tell all my libraries are up to date. I've tried 0.43 and 0.43-r1 -- Chris Bare [EMAIL PROTECTED] -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] InkScape trouble
From: Christoph Eckert [EMAIL PROTECTED] Subject: Re: [gentoo-user] InkScape trouble Date: Sun, 26 Mar 2006 14:06:27 +0200 Hi, ok, my last post was in fact based on emotions -- being sure that I myself has something done wrong (that's why I onyl post the emerge command I did...). Now, here is the output of inkscape right before it crashes: Script started on Sun Mar 26 15:11:00 2006 solfire:/home/mccramerinkscape Emergency save activated! Emergency save completed. Inkscape will close now. If you can reproduce this crash, please file a bug at www.inkscape.org with a detailed description of the steps leading to the crash, so we can fix it. zsh: abort solfire:/home/mccramer Script done on Sun Mar 26 15:11:14 2006 But I fear this say as much as my emotional post previously Keep hacking! mcc BADABOOM! That's it. not really. PLease start Inkscape from a terminal emulation and post the output. Best regards ce -- gentoo-user@gentoo.org mailing list -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] inkscape emerge
On Fri, Oct 7, 2011 at 3:32 PM, James wirel...@tampabay.rr.com wrote: Hello, I read somewhere that inkscape (in portage) can open and allow some manipulation of Visio files. Anyone got any experience with inkscape and visio files? Haven't messed with visio files in years, and then only with Visio. Emerging inkscape, it required 12 new packages to be install too. What must I do to ensure that when I unemerge inkscape, the other 12 packages are also removed? Roughly speaking, emerge -p --depclean will show you what packages are installed which you didn't explicitly ask for, and which are no longer depended upon by any explicitly-selected packages. So, say you install package A, and it depends on new packages B and C. When you uninstall package A, packages B and C remain. When you use --depclean, portage will see that B and C are installed, but aren't required by anything. Remove the -p to have portage go ahead and try to remove them. (But you might see something you want to have remain, which is why you should use -p first) -- :wq
Re: [gentoo-user] Re: Imagemagick downgrade?
On Sunday, 10 November 2019 13:49:32 GMT Nikos Chantziaras wrote: > On 10/11/2019 14:51, Mick wrote: > > Having re-synced portage it now asks me to keyword media-gfx/ > > inkscape-1.0_beta1 and once I do, portage wants to downgrade media-gfx/ > > imagemagick from the installed 7.0.8.67 to 6.9.10.67. > > > > I'm not sure why imagemagick is asking to be downgraded, or for that > > matter > > > why inkscape should be keyworded: > inkscape-1.0_beta is in testing (~arch) so if your gentoo install is not > ~arch, then you need to keyword it. > > Also, it depends on: > > > that is, a version lower then 7. That's why you need to downgrade to > imagemagick 6. Thanks Nikos, I am still confused if the tail is wagging the dog with this one. It is a stable arch, so inkscape should stay stable and not asking me to keyword it, especially as its reverse dependency is stable at a higher version. Consequently, imagemagick would stay at the latest stable version too. Anyway, I removed imagemagick from the world file and now portage is no longer asking for either inkscape or imagemagick to be emerged. -- Regards, Mick signature.asc Description: This is a digitally signed message part.
Re: [gentoo-user] Conflicting version...but the version scheme is confusing...
Hello, On Sat, 30 Nov 2019, tu...@posteo.de wrote: >I got this printed onto my console after updateing: > > (media-gfx/imagemagick-7.0.9.5:0/7.0.9::gentoo, ebuild scheduled for merge) > conflicts with > (media-gfx/inkscape-1.0_beta1:0/0::gentoo, ebuild scheduled for merge) > >What does "media-gfx/imagemagick-7:=[cxx]" indicate for a version ? With an '<' in front of it (and it has), it means that inkscape-1.0_beta1 needs imagemagick <= 7 i.e. some 6.x version ... Basically it means you should mask that inkscape beta. Add e.g. =media-gfx/inkscape-1.0_beta1 to /etc/portage/package.mask[/*]. Or (better) un-keyword ~amd64 inkscape, then you should stay at the (now) stable 0.92.4. HTH, -dnh -- We can use symlinks of course... syslogd would be a symlink to syslogp and ftpd and ircd would be linked to ftpp and ircp... and of course the point-to-point protocal paenguin. -- Kevin M. Bealer, commenting on the penguin Linux logo
Re: [gentoo-user] Inkscape-0.48.1-r1 really sloooooow
Thanks Michael, On Sunday 22 May 2011 00:51:45 Michael Orlitzky wrote: On 05/20/2011 08:49 AM, Mick wrote: Hi All, I installed inkscape-0.48.1-r1 on a x86 machine. For a few seconds/minutes after opening an svg image rendering is fast as expected, but soon it gets bogged down to the point of seeing the image being rendered in slow motion, a row at a time if e.g. I scroll up or down the page. Only 20% of RAM (of 3G total) is being used at the time, so I'm guessing this could be something to do with the ATI video card? Other graphics apps open at the same time (e.g. Gimp) do not have such problems rendering graphics (albeit not svg). I don't suppose you have a ton of fonts installed? I've had Inkscape lock up for like 5 minutes at a time when it was loading the font list (either at startup or when opening the text dialog). No, although I do have a few fonts and a couple extra in ~/.fonts, but the application opens straight away. The image does not have fonts in it and it opens reasonably fast. As soon the user zooms in or pan around the image then the slow rendering starts. I have now looked a bit more into this problem and it seems that inkscape is slower in MSWindows (dual boot machine). So I concluded that this is an inkscape issue, rather than Gentoo specific. Also, googling around it seems that zooming in a lot (more than 1000%) or using many filters (as this user is on the particular image) slows down inkscape: http://www.inkscapeforum.com/viewtopic.php?f=5t=8721 As suggested in the thread above, a work around until the inkscape code is improved is to change the View mode to 'No Filters'. This trick restores rendering speed to reasonable levels. -- Regards, Mick signature.asc Description: This is a digitally signed message part.
Re: [gentoo-user] Re: Does skencil work for anybody else?
On Sat, Mar 13, 2010 at 02:59:34PM +, Grant Edwards wrote: Now this is interesting, inkscape apparently depends on skencil for postscript support? Looks that way, though I'm not sure exactly what it uses skencil for. I would have sworn I had inkscape installed without skencil and could still export to EPS. I looked into it. It is for importing PS and EPS files. And according to the documentation on their website, inkscape 0.47 changed to using Ghostscript for the importing. A bug has already been filed against the ebuild. Cheers, W -- Willie W. Wong ww...@math.princeton.edu Data aequatione quotcunque fluentes quantitae involvente fluxiones invenire et vice versa ~~~ I. Newton
Re: [gentoo-user] Fetch List
On 06/05/2012 01:37 PM, Silvio Siefke wrote: is there a option that i can build a list of Requirements to download of a ebuild? I want build inkscape, but i has only mobile connection at moment. Can i build a list which i can then later load in a cybercafe? In the Handbook i found only a list for world. Thank u. I'm sure there will be a better method, anyway: # emerge -p --fetchonly inkscape | grep http | cut -d ' ' -f 1 (doesn't work for inkscape on my system because emerge spits an USE changes error, but it works for other packages). raffaele
Re: [gentoo-user] Re: Troubles setting USE flag for inkscape
On 04/25 07:28, Remy Blank wrote: > tu...@posteo.de wrote on 25/04/2020 17:55: > > Beside other permutations I add this to package.use > > > > media-gfx/inkscape python_single_target_python3_8 > > Try this instead: > > media-gfx/inkscape PYTHON_SINGLE_TARGET: -* python3_8 > > -- Remy > > Hi Remy, that helped ! To be honest ... I never had deduced this from the error message. Is this pure experience...somehing one had to learn after uears of trying to cope with The Portage Oracle...or is it one has and the other one has not...? ;) ...or what manual do I need to read to up with this line? (NO critism towards you implied!!!) Cheers! Meino
[gentoo-user] Re: X application instability
Hi, I got the same problem (mostly with audacious, scite and inkscape). Did you find a solution ? Thanks Ben -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] X application instability
Hi, I got the same problem (mostly with audacious, scite and inkscape). Did someone find a solution ? Thanks Ben -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] inkscape crash
Chris Bare wrote: Inkscape crashes on me whenever I select Text-Text and Font... Anyone know what to do to fix this? As far as I can tell all my libraries are up to date. I've tried 0.43 and 0.43-r1 OK, I'm not sure why but I have it installed and thought I would see if this helps. It works on mine, the window pops up anyway. The apply button is greyed out on mine though but it was blank. I don't know how to use the thing. This is the info for mine: [EMAIL PROTECTED] / # emerge -pv inkscape These are the packages that I would merge, in order: Calculating dependencies ...done! [ebuild R ] media-gfx/inkscape-0.43 +bonobo -debug +doc -effects -gnome -inkjar +mmx +perl -plugin +python +spell 0 kB Total size of downloads: 0 kB [EMAIL PROTECTED] / # Maybe check to see if your flags are the same as mine. It may be a missing flag or something. If I can check something else, let me know, let me know how to if you would. Dale :-) -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] inkscape won't start
On Sun, Jun 14, 2009 at 01:17, Michael P. Souliermsoul...@digitaltorque.ca wrote: Wow. How'd I get in this state? Try unmerging app-text/poppler*. It's being replaced by dev-libs/poppler* Ward
Re: [gentoo-user] merging pdf file into one page
On Sat, Jan 24, 2015 at 1:26 PM, Joseph syscon...@gmail.com wrote: I've pdf form that I print. Once the form is printed I put it back in the printer tray and print information over top of it. It worked in the past but after I print it second time (over the printed form) the pages look as if they came out of the washing machine. They are crumpled. I think it as to do something with the static. How to I combine (overlap) two pdf files into one page. Load both PDF files in Inkscape, adjust slightly if necessary so everything aligns, and export the resulting file to PDF. You can convert the PDF files to SVG before loading to Inkscape, if the Inkscape converter is not up to your standards. You can use media-gfx/pdf2svg for that. What I do nowadays (if I have a PDF to fill that has no forms), is to load the PDF in Inkscape, and fill it with the text tool. Then print it or export it to SVG or PDF if I want to keep it. Regards. -- Canek Peláez Valdés Profesor de asignatura, Facultad de Ciencias Universidad Nacional Autónoma de México
Re: [gentoo-user] merging pdf file into one page
On 01/24/15 13:34, Canek Peláez Valdés wrote: On Sat, Jan 24, 2015 at 1:26 PM, Joseph [1]syscon...@gmail.com wrote: I've pdf form that I print. Once the form is printed I put it back in the printer tray and print information over top of it. It worked in the past but after I print it second time (over the printed form) the pages look as if they came out of the washing machine. They are crumpled. I think it as to do something with the static. How to I combine (overlap) two pdf files into one page. Load both PDF files in Inkscape, adjust slightly if necessary so everything aligns, and export the resulting file to PDF. You can convert the PDF files to SVG before loading to Inkscape, if the Inkscape converter is not up to your standards. You can use media-gfx/pdf2svg for that. What I do nowadays (if I have a PDF to fill that has no forms), is to load the PDF in Inkscape, and fill it with the text tool. Then print it or export it to SVG or PDF if I want to keep it. Regards. What I'm looking for I think it is called stitching two pdf files. -- Joseph
Re: [gentoo-user] Troubles setting USE flag for inkscape
On 04/25 10:05, Andreas K. Hüttel wrote: > > ## !!! Problem resolving dependencies for media-gfx/inkscape from @selected > > ## > > ## !!! The ebuild selected to satisfy "media-gfx/inkscape" has unmet > > requirements. ## - media-gfx/inkscape-1.0_rc1::gentoo USE="jpeg nls openmp > > -cdr -dbus -dia -exif -graphicsmagick -imagemagick -inkjar -jemalloc -lcms > > -postscript -spell -static-libs -svg2 -visio -wpg" > > PYTHON_SINGLE_TARGET="python3_6 python3_8 -python3_7" ## > > ##The following REQUIRED_USE flag constraints are unsatisfied: > > ## exactly-one-of ( python_single_target_python3_6 > > python_single_target_python3_7 python_single_target_python3_8 ) > > is fixed now and should work out of the box again > > -- > Andreas K. Hüttel > dilfri...@gentoo.org > Gentoo Linux developer > (council, qa, toolchain, base-system, perl, libreoffice) I had similiar problems afterwards with dev-python/pyopengl dev-python/certifi dev-python/setuptools
Re: [gentoo-user] problem with gimp, firefox and inkscape
On Fri, Oct 9, 2009 at 12:41 PM, Platoali plato...@gmail.com wrote: Hi, I've a strange problem with some of my applications. the problem is when I want open a file in inkscape or gimp, or when I want to select a file in firefox to attach the select file appears and then the whole application crashes with this error: Well like you said it seems to be a gtk+ problem. Try changing to a different GTK theme, perhaps.
Re: [gentoo-user] dev-libs/efl-1.18.4 fails to emerge with gcc-5.4.0-r3
On 2017-04-18 23:59, Mick wrote: OK, I tried updating poppler to 0.52.0 which then wanted to re-emerge inkscape, but inkscape failed too: Could it be that gcc-5.4 isn't yet ripe enough for mass consumption? The undefined references are because the program's dependencies aren't rebuilt yet to use the new C++ ABI from gcc-5.4, I think. Try re-emerging the dependencies first. From the error, I suggest re-emerging Gtkmm and its dependencies first. ryo/damillora.
Re: [gentoo-user] Inkscape failed to compile...(update from this morning)
On Sun, Oct 28, 2018 at 3:41 PM wrote: > > Hi, > > while syncing/updateing my system, inkscape failed to compile: > Nikos posted about cairo issue recently that revdep-rebuild didnt fix. I had a similar issue with different software. In my case; emerge -1 x11-libs/cairo dev-cpp/cairomm dev-python/pycairo Fixed it. Not sure which package was the problem.
[gentoo-user] Re: inkscape emerge
Dale rdalek1967 at gmail.com writes: Well, first of all I can report that no version of inkscape in portage works with visio (6.2) files. I've read several places that it should work, but it croaks upon loading the visio (version 6.2) file Grant Edwards wrote: On 2011-10-07, Michael Molmikemol at gmail.com wrote: Remove the -p to have portage go ahead and try to remove them. (But you might see something you want to have remain, which is why you should use -p first) Yes, I got this but in the past depclean has failed or come up miserably short. BUT now, it works very well, not only removing the 12 packages that where in stalled with the stabler version of inkscape but the latest (`) version, I had to install with this syntax: emerge -u inkscape --autounmask-write I'm thinking that ZAK(a_roo_ski) deserves a bunch of BREW_skis ? If the past depclean has disappointed me, particularly when packages were installed with automask... or other sorts of gymnastical syntax.. or just use emerge -n package name. Same thing plus portage puts it in alphabetical order too. Dale It's always good to hear from my favorite track_TOR driving admin. I'm looking to get a small bucket/hoe combo (3-foot/6-inch) for under 10K. Got any suggestions? You mounted an embedded gentoo system on that tractor yet? (for real, not just pulling you leg) ? We gotta get you linked in on that tracter.. with some pics or a video feed ;-) So, I was really trolling for expertise in manipulating visio files via some native linux package. Inkscape was all that google searches returned, and Inkscape could not even load up the visio (.vsd) files... I guess I was not too clear on that point. Oh well, I just had the doz dude send me pdfs. Thanks to all for the help! James
Re: [gentoo-user] sandbox and $HOME
On 6 Nov, Alan McKinnon wrote:
On Thursday 06 November 2008 13:53:47 Helmut Jarausch wrote:
Hi,
I am trying to write an ebuild for media-libs/babl-
Unfortunately, probably when making docs, it invokes
inkscape which wants to access and write to
/root/.config/Inkscape
which probably comes from
$(HOME)/.config/Inkscape
This violates the sandbox - see below -
What can I do about it?
Posting the ebuild you are using would be a good start..
Here it is : (it's simple modification of babl-0.0.22)
# Copyright 1999-2008 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
# $Header: $
inherit eutils subversion
DESCRIPTION=Dynamic, any to any, pixel format conversion library
HOMEPAGE=http://www.gegl.org/babl/;
#SRC_URI=ftp://ftp.gtk.org/pub/${PN}/0.0/${P}.tar.bz2;
ESVN_REPO_URI=http://svn.gnome.org/svn/babl/trunk/;
ESVN_PROJECT=${PN}
LICENSE=GPL-2
SLOT=0
KEYWORDS=~amd64 ~x86
IUSE=sse mmx
DEPEND=virtual/libc
S=${WORKDIR}/${PN}
src_compile() {
./autogen.sh || die autogen failed
econf $(use_enable mmx) \
$(use_enable sse) \
|| die econf failed
emake || die emake failed
}
src_install() {
emake install DESTDIR=${D} || die emake install failed
find ${D} -name '*.la' -delete
dodoc AUTHORS COPYING ChangeLog INSTALL README
}
=
The last messages are: ( I have USE=doc )
make[3]: Entering directory `/var/tmp/portage/media-libs/babl-/work/babl/doc
s/graphics'
SVG: babl-a4poster.png [OK]
SVG: babl-16x16.png [OK]
HTML: BablFishPath.html [OK]
SVG: babl-48x48.png [OK]
make[3]: Leaving directory `/var/tmp/portage/media-libs/babl-/work/babl/docs
/graphics'
RSS: changelog.rss [OK]
HTML: index.html. [OK]
[OK]
make[2]: Leaving directory `/var/tmp/portage/media-libs/babl-/work/babl/docs
'
make[2]: Entering directory `/var/tmp/portage/media-libs/babl-/work/babl'
make[2]: Leaving directory `/var/tmp/portage/media-libs/babl-/work/babl'
make[1]: Leaving directory `/var/tmp/portage/media-libs/babl-/work/babl'
Source compiled.
--- ACCESS VIOLATION SUMMARY ---
LOG FILE = /var/log/sandbox/sandbox-29334.log
mkdir: /root/.config/Inkscape
open_wr: /root/.config/Inkscape/extension-errors.log
mkdir: /root/.config/Inkscape
open_wr: /root/.config/Inkscape/extension-errors.log
mkdir: /root/.config/Inkscape
open_wr: /root/.config/Inkscape/extension-errors.log
Many thanks for any hints,
Helmut.
--
Helmut Jarausch
Lehrstuhl fuer Numerische Mathematik
RWTH - Aachen University
D 52056 Aachen, Germany
[gentoo-user] Re: inkscape emerge
On 2011-10-07, Michael Mol mike...@gmail.com wrote: On Fri, Oct 7, 2011 at 3:32 PM, James wirel...@tampabay.rr.com wrote: Hello, I read somewhere that inkscape (in portage) can open and allow some manipulation of Visio files. Anyone got any experience with inkscape and visio files? Haven't messed with visio files in years, and then only with Visio. Emerging inkscape, it required 12 new packages to be install too. What must I do to ensure that when I unemerge ??inkscape, the other 12 packages are also removed? Roughly speaking, emerge -p --depclean will show you what packages are installed which you didn't explicitly ask for, and which are no longer depended upon by any explicitly-selected packages. [...] Remove the -p to have portage go ahead and try to remove them. (But you might see something you want to have remain, which is why you should use -p first) If you do see packages that you want to keep, but aren't required by anything else, you can manually add them to your world file (usually /var/lib/portage/world) to protect them from removal by emerge --depclean in the future. IIRC, I had to do that to keep portage from removing Python 2 a while back. -- Grant Edwards grant.b.edwardsYow! PUNK ROCK!! DISCO at DUCK!! BIRTH CONTROL!! gmail.com
[gentoo-user] Imagemagick downgrade?
Having re-synced portage it now asks me to keyword media-gfx/ inkscape-1.0_beta1 and once I do, portage wants to downgrade media-gfx/ imagemagick from the installed 7.0.8.67 to 6.9.10.67. I'm not sure why imagemagick is asking to be downgraded, or for that matter why inkscape should be keyworded: snip... These are the packages that would be merged, in order: Calculating dependencies... done! The following keyword changes are necessary to proceed: (see "package.accept_keywords" in the portage(5) man page for more details) # required by @selected # required by @world (argument) =media-gfx/inkscape-1.0_beta1 ~amd64 Would you like to add these changes to your config files? [Yes/No] no * In order to avoid wasting time, backtracking has terminated early * due to the above autounmask change(s). The --autounmask-backtrack=y * option can be used to force further backtracking, but there is no * guarantee that it will produce a solution. !!! All ebuilds that could satisfy "https://www.imagemagick.org/ Description: A collection of tools and libraries for many image formats $ eix -l inkscape [U] media-gfx/inkscape Available versions: 0.92.4^t[cdr dbus dia exif gnome imagemagick inkjar jpeg latex lcms nls openmp postscript spell static-libs visio wpg PYTHON_TARGETS="python2_7"] ["python_targets_python2_7"] (~) 1.0_beta1 ^t[cdr dbus dia exif gnome graphicsmagick imagemagick inkjar jemalloc jpeg lcms nls openmp postscript spell static-libs svg2 visio wpg PYTHON_SINGLE_TARGET="python3_5 python3_6 python3_7" PYTHON_TARGETS="python3_5 python3_6 python3_7"] ["^^ ( python_single_target_python3_5 python_single_target_python3_6 python_single_target_python3_7 ) python_single_target_python3_5? ( python_targets_python3_5 ) python_single_target_python3_6? ( python_targets_python3_6 ) python_single_target_python3_7? ( python_targets_python3_7 )"] Installed versions: 0.92.4^t(10:16:19 14/10/19)(cdr dbus exif imagemagick jpeg lcms nls openmp postscript spell -dia -gnome -inkjar -latex - static-libs -visio -wpg PYTHON_TARGETS="python2_7") Homepage:https://inkscape.org/ Description: SVG based generic vector-drawing program Am I misreading portage's output above? -- Regards, Mick signature.asc Description: This is a digitally signed message part.
Re: [gentoo-user] Conflicting version...but the version scheme is confusing...
On Sat, 30 Nov 2019 05:45:48 +0100 tu...@posteo.de wrote: > On 11/29 10:28, Dale wrote: > > tu...@posteo.de wrote: > > > On 11/29 10:12, Dale wrote: > > >> tu...@posteo.de wrote: > > >>> (media-gfx/imagemagick-7.0.9.5:0/7.0.9::gentoo, ebuild > > >>> scheduled for merge) conflicts with > > >>> > >>> (media-gfx/inkscape-1.0_beta1:0/0::gentoo, ebuild scheduled for > > >>> merge) > > >>> > > >>> What does "media-gfx/imagemagick-7:=[cxx]" indicate for a > > >>> version ? Hi, man 5 ebuild tells us that: = Indicates that any slot value is acceptable. In addition, for runtime dependencies, indicates that the package will break unless a matching package with slot and sub-slot equal to the slot and sub-slot of the best installed version at the time the package was installed is available. In this it case means that inkscape wants the same slot version of imagemagick as it was present in the system at the time inkscape got emerged. So if you update imagemagick to a higher slot, inkscape will break and needs to be rebuilt. The rebuild should have been automatically scheduled by emerge. I am not sure why it did not but you have probably too many other conflicts and emerge got lost in that mess. ;-) It usually helps if you make all the USE flag and keyword changes that emerge wants you to do first. If it does not help then unmerge inkscape and emerge it again after update. > after switching this cxx-thingy off and on again, I get additional > errors: > > dev-python/numpy:0 > > (dev-python/numpy-1.17.4:0/0::gentoo, ebuild scheduled for merge) > conflicts with > dev-python/numpy[python_targets_python2_7(-),python_targets_python3_6(-),-python_single_target_python2_7(-),-python_single_target_python3_5(-),-python_single_target_python3_6(-),-python_single_target_python3_7(-)] > required by (media-libs/opencv-4.1.2:0/4.1.2::gentoo, installed) This looks like python is going to be updated. Again, try to make all the USE flags and keyword changes (they are usually printed at the end of emerge's error output). Then try to increase backtrack value with --backtrack parameter. Robert -- Róbert Čerňanský E-mail: ope...@tightmail.com Jabber: h...@jabber.sk
Re: [gentoo-user] Inkscape-0.48.1-r1 really sloooooow
On 05/20/2011 08:49 AM, Mick wrote: Hi All, I installed inkscape-0.48.1-r1 on a x86 machine. For a few seconds/minutes after opening an svg image rendering is fast as expected, but soon it gets bogged down to the point of seeing the image being rendered in slow motion, a row at a time if e.g. I scroll up or down the page. Only 20% of RAM (of 3G total) is being used at the time, so I'm guessing this could be something to do with the ATI video card? Other graphics apps open at the same time (e.g. Gimp) do not have such problems rendering graphics (albeit not svg). Before I post loads of info which may be unnecessary, have you come across anything similar and how can I troubleshoot it? PS. I unmasked 0.48.1-r1 because 0.48.0 was even worse. I don't suppose you have a ton of fonts installed? I've had Inkscape lock up for like 5 minutes at a time when it was loading the font list (either at startup or when opening the text dialog).
[gentoo-user] Re: [SOLVED] dev-libs/efl-1.18.4 fails to emerge with gcc-5.4.0-r3
On Wednesday 19 Apr 2017 00:39:50 damill...@openmailbox.org wrote: > On 2017-04-18 23:59, Mick wrote: > > OK, I tried updating poppler to 0.52.0 which then wanted to re-emerge > > inkscape, but inkscape failed too: > > > > > > > > Could it be that gcc-5.4 isn't yet ripe enough for mass consumption? > > The undefined references are because the program's dependencies aren't > rebuilt yet to use the new C++ ABI from gcc-5.4, I think. > Try re-emerging the dependencies first. > From the error, I suggest re-emerging Gtkmm and its dependencies first. > > ryo/damillora. Thank you, the efl and inkscape emerge problems were resolved. As you suggested it was a matter of emerging packages in the correct order, which is something I thought revdep-rebuild was doing. I resumed emerge with --skip- first and at the end I emerged these packages manually, without further problems. -- Regards, Mick signature.asc Description: This is a digitally signed message part.
Re: [gentoo-user] Re: Troubles setting USE flag for inkscape
On Sat, Apr 25, 2020 at 08:33:36PM +0200, tu...@posteo.de wrote: > On 04/25 07:28, Remy Blank wrote: > > tu...@posteo.de wrote on 25/04/2020 17:55: > > > Beside other permutations I add this to package.use > > > > > > media-gfx/inkscape python_single_target_python3_8 > > > > Try this instead: > > > > media-gfx/inkscape PYTHON_SINGLE_TARGET: -* python3_8 > > > > -- Remy > > > > > > Hi Remy, > > that helped ! > > To be honest ... I never had deduced this from the error message. > Is this pure experience...somehing one had to learn after uears > of trying to cope with The Portage Oracle...or is it one has > and the other one has not...? ;) > > ...or what manual do I need to read to up with this line? He's just masking all Python single targets (-* = disable all) except for one (python3_8), thus satisfying the requirement that only one is set. -- Ashley Dixon suugaku.co.uk 2A9A 4117 DA96 D18A 8A7B B0D2 A30E BF25 F290 A8AA signature.asc Description: PGP signature
Re: [gentoo-user] Good diagram app
Take a look at Inkscape. Many very nice features, some overlap with dia, some quite different. I emerged inkscape, but it's not quite what I need. Need something to draw flowcharts and diagrams. KOffice has just expanded with a new diagram tool called kivio . It looked pretty good, almost made me wish I had some use for a diagram tool. Will emerge koffice to have a look at it. Thank you two. -- Bruno Lustosa, aka Lofofora | Email: [EMAIL PROTECTED] Network Administrator/Web Programmer | ICQ: 1406477 Rio de Janeiro - Brazil | -- gentoo-user@gentoo.org mailing list
[gentoo-user] Inkscape-0.48.1-r1 really sloooooow
Hi All, I installed inkscape-0.48.1-r1 on a x86 machine. For a few seconds/minutes after opening an svg image rendering is fast as expected, but soon it gets bogged down to the point of seeing the image being rendered in slow motion, a row at a time if e.g. I scroll up or down the page. Only 20% of RAM (of 3G total) is being used at the time, so I'm guessing this could be something to do with the ATI video card? Other graphics apps open at the same time (e.g. Gimp) do not have such problems rendering graphics (albeit not svg). Before I post loads of info which may be unnecessary, have you come across anything similar and how can I troubleshoot it? PS. I unmasked 0.48.1-r1 because 0.48.0 was even worse. -- Regards, Mick
Re: [gentoo-user] Fetch List
Hello! On Tue, 5 Jun 2012 13:37:11 +0200 Silvio Siefke siefke_lis...@web.de wrote: Hello, is there a option that i can build a list of Requirements to download of a ebuild? I usually use emerge --pretend --fetchonly media-gfx/inkscape files_to_fetch.txt or in a short form emerge -fp media-gfx/inkscape files_to_fetch.txt And after that I download the files with wget as follows: cat files_to_fetch.txt | cut -d -f 1| wget -c -i - Note: if there are some errors during download, you may try to use different fields in 'cut' -- like -f 2 or -f 3 and so on. Hope, this helps. :) Regards, Vladimir - v...@ukr.net
Re: [gentoo-user] Inkscape failed to compile...(update from this morning)
On Sun, Oct 28, 2018 at 4:08 PM Adam Carter wrote: > On Sun, Oct 28, 2018 at 3:41 PM wrote: > >> >> Hi, >> >> while syncing/updateing my system, inkscape failed to compile: >> > > Nikos posted about cairo issue recently that revdep-rebuild didnt fix. I > had a similar issue with different software. In my case; > > emerge -1 x11-libs/cairo dev-cpp/cairomm dev-python/pycairo > > Fixed it. Not sure which package was the problem. > dev-cpp/cairomm seems like the most likely candidate as its files are mentioned in Nikos' and your build errors, so try rebuilding that one first.
Re: [gentoo-user] Installed over and over again: Imagemagick
On Wed, 11 Dec 2019 12:49:01 -0500, Jack wrote: > > package.use/inkscape:media-gfx/inkscape jpeg nls openmp cdr dbus dia > > exif -gnome imagemagick inkjar latex lcms postscript visio wpg > > PYTHON_TARGETS="python2_7") > > > > > > Cheers! > > mcc > I'm curious why you have the PYTHON_TARGET set for imagemagick. I > don't see any mention of python anywhere in any of the imagemagick > ebuilds, and "emerge -p imagemagick" doesn't say anything about python. He doesn't, it is set for inkscape. However, that trailing ) shouldn't be there. I doubt it is the cause of the problem, but it's worth cleaning up anyway. -- Neil Bothwick WinErr 683: Time out error - Operator fell asleep while waiting for the system to complete boot procedure. pgp2FEyIme2hu.pgp Description: OpenPGP digital signature
Re: [gentoo-user] [OT] program to create buttons and graphic text
i would like to know which program can be suited to create buttons and graphic text to be used, for example, in web pages. Go vector and therefore Inkscape. Best regards ce -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Re: X application instability
Hi, I got the same problem (mostly with audacious, scite and inkscape). Did you find a solution ? Thanks Ben PS : sorry if this message appeared more than one time, I'm new to mailing lists and I didn't really know how to write the subject. -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] sodipodi
use inkscape, it's sodipodi fork http://wiki.inkscape.org/wiki/index.php/SodiPodi 2006/10/18, Stéphane ANCELOT [EMAIL PROTECTED]: Hi, I can not find sodipodi in emerge where is it ? Bye -- gentoo-user@gentoo.org mailing list -- regards, Hegai Ilya -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Does skencil work for anybody else?
=== On Fri, 03/12, Grant Edwards wrote: === Does skencil work for anybody else? === You should probably be using inkscape instead. I'm not sure skencil is maintained. BTW, I have the exact same problem with skencil. -- Keith Dart -- -- ~ Keith Dart ke...@dartworks.biz public key: ID: 19017044 http://www.dartworks.biz/ =
[gentoo-user] inkscape fails, cannot find boost
Dear list, Just want a sanity check. I try to emerge the most recent version of inkscape (media-gfx/inkscape-0.48.0), and the build fails in the configuration stage -snip build.log checking for IMAGEMAGICK... yes checking for CAIRO_USER_FONTS... yes checking for INKSCAPE... yes checking for Mac OS X Carbon support... no checking boost/concept_check.hpp usability... no checking boost/concept_check.hpp presence... no checking for boost/concept_check.hpp... no configure: error: You need the boost package (e.g. libboost-dev) --- -snip config.log configure:7205: checking for unistd.h configure:7205: i686-pc-linux-gnu-g++ -c -O2 -march=native -pipe -fno-strict-ali asing -Werror=format-security -Wall -Wformat -Wformat-security -W -D_FORTIFY_SOU RCE=2 conftest.cpp 5 configure:7205: $? = 0 configure:7205: result: yes configure:7218: checking boost/unordered_set.hpp usability configure:7218: i686-pc-linux-gnu-g++ -c -O2 -march=native -pipe -fno-strict-aliasing -Werror=format-security -Wall -Wformat -Wformat-security -W -D_FORTIFY_SOURCE=2 conftest.cpp 5 conftest.cpp:55:35: error: boost/unordered_set.hpp: No such file or directory configure:7218: $? = 1 - `qcheck boost' returns that all 7000+ files are good, and /usr/include/boost-1_42boost/unordered_set.hpp exists. Any thoughts what can be given me problems? Cheers, W -- Willie W. Wong ww...@math.princeton.edu Data aequatione quotcunque fluentes quantitae involvente fluxiones invenire et vice versa ~~~ I. Newton
Re: [gentoo-user] PDF: convert to grayscale
On 02/08/2011 08:50 AM, Nuno J. Silva wrote: Does anyone know a tool (other than ghostscript) that is able to convert a PDF (or postscript) to grayscale? Ghostscript does this, but is unable to convert gradients and fills (they're replaced by bitmaps) which results in a too big file unless I drastically reduce quality. Have you tried inkscape? it is in portage. -- Valmor
Re: [gentoo-user] Imagemagick and Graphicsmagick blocking each other
Frank Steinmetzger writes: a number of packages depend on imagemagick, such as Inkscape, Frescobaldi and some LaTeX related stuff. I wanted to take a look at Octave, but this positively wants graphicsmagick, which is a fork of imagemagick as far as I can tell and which conflicts with imagemagick. It seems you can install graphicsmagick along with imagemagick, if the imagemagick USE flag ist not set. Wonko
[gentoo-user] Fetch List
Hello, is there a option that i can build a list of Requirements to download of a ebuild? I want build inkscape, but i has only mobile connection at moment. Can i build a list which i can then later load in a cybercafe? In the Handbook i found only a list for world. Thank u. Regards Silvio
Re: [gentoo-user] merging pdf file into one page
On 25/01/15 03:47, Joseph wrote: On 01/24/15 13:34, Canek Peláez Valdés wrote: On Sat, Jan 24, 2015 at 1:26 PM, Joseph [1]syscon...@gmail.com wrote: I've pdf form that I print. Once the form is printed I put it back in the printer tray and print information over top of it. It worked in the past but after I print it second time (over the printed form) the pages look as if they came out of the washing machine. They are crumpled. I think it as to do something with the static. How to I combine (overlap) two pdf files into one page. Load both PDF files in Inkscape, adjust slightly if necessary so everything aligns, and export the resulting file to PDF. You can convert the PDF files to SVG before loading to Inkscape, if the Inkscape converter is not up to your standards. You can use media-gfx/pdf2svg for that. What I do nowadays (if I have a PDF to fill that has no forms), is to load the PDF in Inkscape, and fill it with the text tool. Then print it or export it to SVG or PDF if I want to keep it. Regards. What I'm looking for I think it is called stitching two pdf files. I use something like: use pdf2ps to covert the files to postscript use psjoin to stich them together use ps2pdf to get back to pdf psjoin is a script at http://homepage3.nifty.com/tsato/tools/psjoin.html BillK
Re: [gentoo-user] Inkscape failed to compile...(update from this morning)
On Sunday, 28 October 2018 09:05:59 GMT tu...@posteo.de wrote: > oh YEAH...sometimes the """problem""" seems to imply > a vast complicate solutionand one do not even > assume that there is something that straight forward > as > > emerge --deselect cairomm > > . > GREAT! :) > > Cheers! > Meino Glad to be of service. :) -- Regards, Peter.
Re: [gentoo-user] Installed over and over again: Imagemagick
tu...@posteo.de wrote: > On 12/11 05:55, Neil Bothwick wrote: >> On Wed, 11 Dec 2019 12:49:01 -0500, Jack wrote: >> >>>> package.use/inkscape:media-gfx/inkscape jpeg nls openmp cdr dbus dia >>>> exif -gnome imagemagick inkjar latex lcms postscript visio wpg >>>> PYTHON_TARGETS="python2_7") >>>> >>>> >>>> Cheers! >>>> mcc >>> I'm curious why you have the PYTHON_TARGET set for imagemagick. I >>> don't see any mention of python anywhere in any of the imagemagick >>> ebuilds, and "emerge -p imagemagick" doesn't say anything about python. >> He doesn't, it is set for inkscape. However, that trailing ) shouldn't be >> there. I doubt it is the cause of the problem, but it's worth cleaning up >> anyway. >> >> >> -- >> Neil Bothwick >> >> WinErr 683: Time out error - Operator fell asleep while waiting for the >> system to complete boot procedure. > I removed the ')' and updated again (did this aboyt 2h before). > > The onlu one, which ich being emerged is imagemagick... > > But I saw this again: > > WARNING: One or more updates/rebuilds have been skipped due to a dependency > conflict: > > media-gfx/imagemagick:0 > > (media-gfx/imagemagick-7.0.9.7:0/7.0.9::gentoo, ebuild scheduled for merge) > conflicts with > (media-gfx/inkscape-1.0_beta2:0/0::gentoo, installed) > ^ ^ > (media-gfx/inkscape-1.0_beta2:0/0::gentoo, installed) > ^ ^ > > Cheers! > mcc > I vaguely remember seeing this. I couldn't recall the fix so I went digging. I found this: /etc/portage/package.use/package.use:media-gfx/imagemagick cxx It seems I added the cxx USE flag for that package to correct the problem. Might be worth a try. Hope that helps. Dale :-) :-)
Re: [gentoo-user] Troubles setting USE flag for inkscape
On 4/25/20 11:55 AM, tu...@posteo.de wrote: > ## ... PYTHON_SINGLE_TARGET="python3_6 python3_8 -python3_7" > ## > ##The following REQUIRED_USE flag constraints are unsatisfied: > ## exactly-one-of ( python_single_target_python3_6 > python_single_target_python3_7 python_single_target_python3_8 ) > "Single target" means you've gotta pick just one.
[gentoo-user] Inkscape failed to compile...(update from this morning)
Hi, while syncing/updateing my system, inkscape failed to compile: /usr/lib/gcc/x86_64-pc-linux-gnu/8.2.0/../../../../x86_64-pc-linux-gnu/bin/ld: /usr/lib/gcc/x86_64-pc-linux-gnu/8.2.0/../../../../lib64/libcairomm-1.0.so: undefined reference to `cairo_script_create' /usr/lib/gcc/x86_64-pc-linux-gnu/8.2.0/../../../../x86_64-pc-linux-gnu/bin/ld: /usr/lib/gcc/x86_64-pc-linux-gnu/8.2.0/../../../../lib64/libcairomm-1.0.so: undefined reference to `cairo_script_get_mode' /usr/lib/gcc/x86_64-pc-linux-gnu/8.2.0/../../../../x86_64-pc-linux-gnu/bin/ld: /usr/lib/gcc/x86_64-pc-linux-gnu/8.2.0/../../../../lib64/libcairomm-1.0.so: undefined reference to `cairo_script_surface_create' /usr/lib/gcc/x86_64-pc-linux-gnu/8.2.0/../../../../x86_64-pc-linux-gnu/bin/ld: /usr/lib/gcc/x86_64-pc-linux-gnu/8.2.0/../../../../lib64/libcairomm-1.0.so: undefined reference to `cairo_script_write_comment' /usr/lib/gcc/x86_64-pc-linux-gnu/8.2.0/../../../../x86_64-pc-linux-gnu/bin/ld: /usr/lib/gcc/x86_64-pc-linux-gnu/8.2.0/../../../../lib64/libcairomm-1.0.so: undefined reference to `cairo_script_create_for_stream' /usr/lib/gcc/x86_64-pc-linux-gnu/8.2.0/../../../../x86_64-pc-linux-gnu/bin/ld: /usr/lib/gcc/x86_64-pc-linux-gnu/8.2.0/../../../../lib64/libcairomm-1.0.so: undefined reference to `cairo_script_set_mode' /usr/lib/gcc/x86_64-pc-linux-gnu/8.2.0/../../../../x86_64-pc-linux-gnu/bin/ld: /usr/lib/gcc/x86_64-pc-linux-gnu/8.2.0/../../../../lib64/libcairomm-1.0.so: undefined reference to `cairo_script_from_recording_surface' /usr/lib/gcc/x86_64-pc-linux-gnu/8.2.0/../../../../x86_64-pc-linux-gnu/bin/ld: /usr/lib/gcc/x86_64-pc-linux-gnu/8.2.0/../../../../lib64/libcairomm-1.0.so: undefined reference to `cairo_script_surface_create_for_target' collect2: error: ld returned 1 exit status make[3]: *** [Makefile:7921: inkview] Error 1 make[3]: *** Waiting for unfinished jobs /usr/lib/gcc/x86_64-pc-linux-gnu/8.2.0/../../../../x86_64-pc-linux-gnu/bin/ld: /usr/lib/gcc/x86_64-pc-linux-gnu/8.2.0/../../../../lib64/libcairomm-1.0.so: undefined reference to `cairo_script_create' /usr/lib/gcc/x86_64-pc-linux-gnu/8.2.0/../../../../x86_64-pc-linux-gnu/bin/ld: /usr/lib/gcc/x86_64-pc-linux-gnu/8.2.0/../../../../lib64/libcairomm-1.0.so: undefined reference to `cairo_script_get_mode' /usr/lib/gcc/x86_64-pc-linux-gnu/8.2.0/../../../../x86_64-pc-linux-gnu/bin/ld: /usr/lib/gcc/x86_64-pc-linux-gnu/8.2.0/../../../../lib64/libcairomm-1.0.so: undefined reference to `cairo_script_surface_create' /usr/lib/gcc/x86_64-pc-linux-gnu/8.2.0/../../../../x86_64-pc-linux-gnu/bin/ld: /usr/lib/gcc/x86_64-pc-linux-gnu/8.2.0/../../../../lib64/libcairomm-1.0.so: undefined reference to `cairo_script_write_comment' /usr/lib/gcc/x86_64-pc-linux-gnu/8.2.0/../../../../x86_64-pc-linux-gnu/bin/ld: /usr/lib/gcc/x86_64-pc-linux-gnu/8.2.0/../../../../lib64/libcairomm-1.0.so: undefined reference to `cairo_script_create_for_stream' /usr/lib/gcc/x86_64-pc-linux-gnu/8.2.0/../../../../x86_64-pc-linux-gnu/bin/ld: /usr/lib/gcc/x86_64-pc-linux-gnu/8.2.0/../../../../lib64/libcairomm-1.0.so: undefined reference to `cairo_script_set_mode' /usr/lib/gcc/x86_64-pc-linux-gnu/8.2.0/../../../../x86_64-pc-linux-gnu/bin/ld: /usr/lib/gcc/x86_64-pc-linux-gnu/8.2.0/../../../../lib64/libcairomm-1.0.so: undefined reference to `cairo_script_from_recording_surface' /usr/lib/gcc/x86_64-pc-linux-gnu/8.2.0/../../../../x86_64-pc-linux-gnu/bin/ld: /usr/lib/gcc/x86_64-pc-linux-gnu/8.2.0/../../../../lib64/libcairomm-1.0.so: undefined reference to `cairo_script_surface_create_for_target' collect2: error: ld returned 1 exit status make[3]: *** [Makefile:7917: inkscape] Error 1 make[3]: Leaving directory '/var/tmp/portage/media-gfx/inkscape-0.92.3-r1/work/inkscape-0.92.3/src' make[2]: *** [Makefile:5976: all] Error 2 make[2]: Leaving directory '/var/tmp/portage/media-gfx/inkscape-0.92.3-r1/work/inkscape-0.92.3/src' make[1]: *** [Makefile:1472: all-recursive] Error 1 make[1]: Leaving directory '/var/tmp/portage/media-gfx/inkscape-0.92.3-r1/work/inkscape-0.92.3' make: *** [Makefile:1128: all] Error 2 * ERROR: media-gfx/inkscape-0.92.3-r1::gentoo failed (compile phase): * emake failed If wanted I will all the logs in all their glory... Cheers! Meino
Re: [gentoo-user] Inkscape failed to compile...(update from this morning)
tu...@posteo.de wrote: > Hi, > > while syncing/updateing my system, inkscape failed to compile: > > > /usr/lib/gcc/x86_64-pc-linux-gnu/8.2.0/../../../../x86_64-pc-linux-gnu/bin/ld: > /usr/lib/gcc/x86_64-pc-linux-gnu/8.2.0/../../../../lib64/libcairomm-1.0.so: > undefined reference to `cairo_script_create' > /usr/lib/gcc/x86_64-pc-linux-gnu/8.2.0/../../../../x86_64-pc-linux-gnu/bin/ld: > /usr/lib/gcc/x86_64-pc-linux-gnu/8.2.0/../../../../lib64/libcairomm-1.0.so: > undefined reference to `cairo_script_get_mode' > /usr/lib/gcc/x86_64-pc-linux-gnu/8.2.0/../../../../x86_64-pc-linux-gnu/bin/ld: > /usr/lib/gcc/x86_64-pc-linux-gnu/8.2.0/../../../../lib64/libcairomm-1.0.so: > undefined reference to `cairo_script_surface_create' > /usr/lib/gcc/x86_64-pc-linux-gnu/8.2.0/../../../../x86_64-pc-linux-gnu/bin/ld: > /usr/lib/gcc/x86_64-pc-linux-gnu/8.2.0/../../../../lib64/libcairomm-1.0.so: > undefined reference to `cairo_script_write_comment' > /usr/lib/gcc/x86_64-pc-linux-gnu/8.2.0/../../../../x86_64-pc-linux-gnu/bin/ld: > /usr/lib/gcc/x86_64-pc-linux-gnu/8.2.0/../../../../lib64/libcairomm-1.0.so: > undefined reference to `cairo_script_create_for_stream' > /usr/lib/gcc/x86_64-pc-linux-gnu/8.2.0/../../../../x86_64-pc-linux-gnu/bin/ld: > /usr/lib/gcc/x86_64-pc-linux-gnu/8.2.0/../../../../lib64/libcairomm-1.0.so: > undefined reference to `cairo_script_set_mode' > /usr/lib/gcc/x86_64-pc-linux-gnu/8.2.0/../../../../x86_64-pc-linux-gnu/bin/ld: > /usr/lib/gcc/x86_64-pc-linux-gnu/8.2.0/../../../../lib64/libcairomm-1.0.so: > undefined reference to `cairo_script_from_recording_surface' > /usr/lib/gcc/x86_64-pc-linux-gnu/8.2.0/../../../../x86_64-pc-linux-gnu/bin/ld: > /usr/lib/gcc/x86_64-pc-linux-gnu/8.2.0/../../../../lib64/libcairomm-1.0.so: > undefined reference to `cairo_script_surface_create_for_target' > collect2: error: ld returned 1 exit status > make[3]: *** [Makefile:7921: inkview] Error 1 > make[3]: *** Waiting for unfinished jobs > /usr/lib/gcc/x86_64-pc-linux-gnu/8.2.0/../../../../x86_64-pc-linux-gnu/bin/ld: > /usr/lib/gcc/x86_64-pc-linux-gnu/8.2.0/../../../../lib64/libcairomm-1.0.so: > undefined reference to `cairo_script_create' > /usr/lib/gcc/x86_64-pc-linux-gnu/8.2.0/../../../../x86_64-pc-linux-gnu/bin/ld: > /usr/lib/gcc/x86_64-pc-linux-gnu/8.2.0/../../../../lib64/libcairomm-1.0.so: > undefined reference to `cairo_script_get_mode' > /usr/lib/gcc/x86_64-pc-linux-gnu/8.2.0/../../../../x86_64-pc-linux-gnu/bin/ld: > /usr/lib/gcc/x86_64-pc-linux-gnu/8.2.0/../../../../lib64/libcairomm-1.0.so: > undefined reference to `cairo_script_surface_create' > /usr/lib/gcc/x86_64-pc-linux-gnu/8.2.0/../../../../x86_64-pc-linux-gnu/bin/ld: > /usr/lib/gcc/x86_64-pc-linux-gnu/8.2.0/../../../../lib64/libcairomm-1.0.so: > undefined reference to `cairo_script_write_comment' > /usr/lib/gcc/x86_64-pc-linux-gnu/8.2.0/../../../../x86_64-pc-linux-gnu/bin/ld: > /usr/lib/gcc/x86_64-pc-linux-gnu/8.2.0/../../../../lib64/libcairomm-1.0.so: > undefined reference to `cairo_script_create_for_stream' > /usr/lib/gcc/x86_64-pc-linux-gnu/8.2.0/../../../../x86_64-pc-linux-gnu/bin/ld: > /usr/lib/gcc/x86_64-pc-linux-gnu/8.2.0/../../../../lib64/libcairomm-1.0.so: > undefined reference to `cairo_script_set_mode' > /usr/lib/gcc/x86_64-pc-linux-gnu/8.2.0/../../../../x86_64-pc-linux-gnu/bin/ld: > /usr/lib/gcc/x86_64-pc-linux-gnu/8.2.0/../../../../lib64/libcairomm-1.0.so: > undefined reference to `cairo_script_from_recording_surface' > /usr/lib/gcc/x86_64-pc-linux-gnu/8.2.0/../../../../x86_64-pc-linux-gnu/bin/ld: > /usr/lib/gcc/x86_64-pc-linux-gnu/8.2.0/../../../../lib64/libcairomm-1.0.so: > undefined reference to `cairo_script_surface_create_for_target' > collect2: error: ld returned 1 exit status > make[3]: *** [Makefile:7917: inkscape] Error 1 > make[3]: Leaving directory > '/var/tmp/portage/media-gfx/inkscape-0.92.3-r1/work/inkscape-0.92.3/src' > make[2]: *** [Makefile:5976: all] Error 2 > make[2]: Leaving directory > '/var/tmp/portage/media-gfx/inkscape-0.92.3-r1/work/inkscape-0.92.3/src' > make[1]: *** [Makefile:1472: all-recursive] Error 1 > make[1]: Leaving directory > '/var/tmp/portage/media-gfx/inkscape-0.92.3-r1/work/inkscape-0.92.3' > make: *** [Makefile:1128: all] Error 2 > * ERROR: media-gfx/inkscape-0.92.3-r1::gentoo failed (compile phase): > * emake failed > > > If wanted I will all the logs in all their glory... > > Cheers! > Meino > Check and see if running emerge @preserved-rebuild rebuilds anything. If it does, try again after it finishes. If not, no idea. Maybe someone else will come along with a idea. Dale :-) :-)
Re: [gentoo-user] Inkscape failed to compile...(update from this morning)
On 10/27 10:54, Dale wrote: > tu...@posteo.de wrote: > > Hi, > > > > while syncing/updateing my system, inkscape failed to compile: > > > > > > /usr/lib/gcc/x86_64-pc-linux-gnu/8.2.0/../../../../x86_64-pc-linux-gnu/bin/ld: > > > > /usr/lib/gcc/x86_64-pc-linux-gnu/8.2.0/../../../../lib64/libcairomm-1.0.so: > > undefined reference to `cairo_script_create' > > /usr/lib/gcc/x86_64-pc-linux-gnu/8.2.0/../../../../x86_64-pc-linux-gnu/bin/ld: > > > > /usr/lib/gcc/x86_64-pc-linux-gnu/8.2.0/../../../../lib64/libcairomm-1.0.so: > > undefined reference to `cairo_script_get_mode' > > /usr/lib/gcc/x86_64-pc-linux-gnu/8.2.0/../../../../x86_64-pc-linux-gnu/bin/ld: > > > > /usr/lib/gcc/x86_64-pc-linux-gnu/8.2.0/../../../../lib64/libcairomm-1.0.so: > > undefined reference to `cairo_script_surface_create' > > /usr/lib/gcc/x86_64-pc-linux-gnu/8.2.0/../../../../x86_64-pc-linux-gnu/bin/ld: > > > > /usr/lib/gcc/x86_64-pc-linux-gnu/8.2.0/../../../../lib64/libcairomm-1.0.so: > > undefined reference to `cairo_script_write_comment' > > /usr/lib/gcc/x86_64-pc-linux-gnu/8.2.0/../../../../x86_64-pc-linux-gnu/bin/ld: > > > > /usr/lib/gcc/x86_64-pc-linux-gnu/8.2.0/../../../../lib64/libcairomm-1.0.so: > > undefined reference to `cairo_script_create_for_stream' > > /usr/lib/gcc/x86_64-pc-linux-gnu/8.2.0/../../../../x86_64-pc-linux-gnu/bin/ld: > > > > /usr/lib/gcc/x86_64-pc-linux-gnu/8.2.0/../../../../lib64/libcairomm-1.0.so: > > undefined reference to `cairo_script_set_mode' > > /usr/lib/gcc/x86_64-pc-linux-gnu/8.2.0/../../../../x86_64-pc-linux-gnu/bin/ld: > > > > /usr/lib/gcc/x86_64-pc-linux-gnu/8.2.0/../../../../lib64/libcairomm-1.0.so: > > undefined reference to `cairo_script_from_recording_surface' > > /usr/lib/gcc/x86_64-pc-linux-gnu/8.2.0/../../../../x86_64-pc-linux-gnu/bin/ld: > > > > /usr/lib/gcc/x86_64-pc-linux-gnu/8.2.0/../../../../lib64/libcairomm-1.0.so: > > undefined reference to `cairo_script_surface_create_for_target' > > collect2: error: ld returned 1 exit status > > make[3]: *** [Makefile:7921: inkview] Error 1 > > make[3]: *** Waiting for unfinished jobs > > /usr/lib/gcc/x86_64-pc-linux-gnu/8.2.0/../../../../x86_64-pc-linux-gnu/bin/ld: > > > > /usr/lib/gcc/x86_64-pc-linux-gnu/8.2.0/../../../../lib64/libcairomm-1.0.so: > > undefined reference to `cairo_script_create' > > /usr/lib/gcc/x86_64-pc-linux-gnu/8.2.0/../../../../x86_64-pc-linux-gnu/bin/ld: > > > > /usr/lib/gcc/x86_64-pc-linux-gnu/8.2.0/../../../../lib64/libcairomm-1.0.so: > > undefined reference to `cairo_script_get_mode' > > /usr/lib/gcc/x86_64-pc-linux-gnu/8.2.0/../../../../x86_64-pc-linux-gnu/bin/ld: > > > > /usr/lib/gcc/x86_64-pc-linux-gnu/8.2.0/../../../../lib64/libcairomm-1.0.so: > > undefined reference to `cairo_script_surface_create' > > /usr/lib/gcc/x86_64-pc-linux-gnu/8.2.0/../../../../x86_64-pc-linux-gnu/bin/ld: > > > > /usr/lib/gcc/x86_64-pc-linux-gnu/8.2.0/../../../../lib64/libcairomm-1.0.so: > > undefined reference to `cairo_script_write_comment' > > /usr/lib/gcc/x86_64-pc-linux-gnu/8.2.0/../../../../x86_64-pc-linux-gnu/bin/ld: > > > > /usr/lib/gcc/x86_64-pc-linux-gnu/8.2.0/../../../../lib64/libcairomm-1.0.so: > > undefined reference to `cairo_script_create_for_stream' > > /usr/lib/gcc/x86_64-pc-linux-gnu/8.2.0/../../../../x86_64-pc-linux-gnu/bin/ld: > > > > /usr/lib/gcc/x86_64-pc-linux-gnu/8.2.0/../../../../lib64/libcairomm-1.0.so: > > undefined reference to `cairo_script_set_mode' > > /usr/lib/gcc/x86_64-pc-linux-gnu/8.2.0/../../../../x86_64-pc-linux-gnu/bin/ld: > > > > /usr/lib/gcc/x86_64-pc-linux-gnu/8.2.0/../../../../lib64/libcairomm-1.0.so: > > undefined reference to `cairo_script_from_recording_surface' > > /usr/lib/gcc/x86_64-pc-linux-gnu/8.2.0/../../../../x86_64-pc-linux-gnu/bin/ld: > > > > /usr/lib/gcc/x86_64-pc-linux-gnu/8.2.0/../../../../lib64/libcairomm-1.0.so: > > undefined reference to `cairo_script_surface_create_for_target' > > collect2: error: ld returned 1 exit status > > make[3]: *** [Makefile:7917: inkscape] Error 1 > > make[3]: Leaving directory > > '/var/tmp/portage/media-gfx/inkscape-0.92.3-r1/work/inkscape-0.92.3/src' > > make[2]: *** [Makefile:5976: all] Error 2 > > make[2]: Leaving directory > > '/var/tmp/portage/media-gfx/inkscape-0.92.3-r1/work/inkscape-0.92.3/src' > > make[1]: *** [Makefile:1472: all-recursive] Error 1 > > make[1]: Leaving directory > > '/var/tmp/portage/media-gfx/inkscape-0.92.3-r1/work/inkscape-0.92.3' > > make: *** [Makefile:1128: all] Error 2 > &g
Re: [gentoo-user] dev-libs/efl-1.18.4 fails to emerge with gcc-5.4.0-r3
On Tuesday 18 Apr 2017 16:47:25 Mick wrote: > On Tuesday 18 Apr 2017 17:24:00 Raffaele Belardi wrote: > > Mick wrote: > > > On Tuesday 18 Apr 2017 16:58:02 Raffaele Belardi wrote: > > >> Mick wrote: > > >>> I started rebuilding the world and his wife following an update to > > >>> gcc-5.4.0- r3 as per suggestion in e-log: > > >>> > > >>> revdep-rebuild --library 'libstdc++.so.6' -- --exclude gcc > > >>> > > >>> However, dev-libs/efl failed to make as shown below. Any idea how to > > >>> overcome this breakage? > > >>> > > >>> emerge -1aDv dev-libs/efl > > >>> [snip ..] > > >>> > > >>> This was the 110th package out of 413 being rebuild, so I assume > > >>> poppler > > >>> et al should have already been rebuilt in advance as dependencies. > > >>> What > > >>> can I try? > > >> > > >> Maybe https://bugs.gentoo.org/show_bug.cgi?id=615326 ? > > >> Is poppler really installed? > > >> > > >> raffaele > > > > > > Yes, it seems to be: > > > > > > $ eix -l poppler > > > [I] app-text/poppler > > > > > > Available versions: > > > 0.45.0(0/62)^t[cairo cairo-qt cjk curl cxx debug doc > > > > > > +introspection +jpeg +jpeg2k +lcms nss png qt4 qt5 tiff > > > +utils] ["cairo-qt? ( qt4 )"] > > > > > >~0.51.0(0/66)^t[cairo cairo-qt cjk curl cxx debug doc > > > > > > +introspection +jpeg +jpeg2k +lcms nss png qt4 qt5 tiff > > > +utils] ["cairo-qt? ( qt4 )"] > > > > > >~0.52.0(0/66)^t[cairo cjk curl cxx debug doc > > >+introspection > > > > > > +jpeg +jpeg2k +lcms nss png qt4 qt5 tiff +utils] > > > > > >** (0/)^t [cairo cairo-qt cjk curl cxx debug doc > > > > > > +introspection +jpeg +jpeg2k +lcms nss png qt4 qt5 tiff > > > +utils] ["cairo-qt? ( qt4 )"] > > > > > > Installed versions: 0.45.0^t(10:10:43 30/07/16)(cairo cxx > > > introspection > > > > > > jpeg jpeg2k lcms png qt4 qt5 tiff utils -cairo-qt -cjk -curl -debug -doc > > > -nss) > > > > Another guess: you are installing unstable (~) for efl but poppler is > > still > > at stable version: maybe you could try to manually update poppler before > > efl. > > > > raffaele > > Hmm ... I don't think so, both because it worked before this gcc update and > because when I fed poppler and elf to emerge, it wanted to emerge efl first. OK, I tried updating poppler to 0.52.0 which then wanted to re-emerge inkscape, but inkscape failed too: libdepixelize/libdepixelize.a(kopftracer2011.o): In function `Tracer::Kopf2011::to_grouped_voronoi(std::__cxx11::basic_string<char, std::char_traits, std::allocator > const&, Tracer::Kopf2011::Options const&)': kopftracer2011.cpp:(.text+0x618): undefined reference to `Gdk::Pixbuf::create_from_file(std::__cxx11::basic_string<char, std::char_traits, std::allocator > const&)' libdepixelize/libdepixelize.a(kopftracer2011.o): In function `Tracer::Kopf2011::to_splines(std::__cxx11::basic_string<char, std::char_traits, std::allocator > const&, Tracer::Kopf2011::Options const&)': kopftracer2011.cpp:(.text+0x848): undefined reference to `Gdk::Pixbuf::create_from_file(std::__cxx11::basic_string<char, std::char_traits, std::allocator > const&)' /usr/lib/gcc/x86_64-pc-linux-gnu/5.4.0/../../../../lib64/libgtkmm-2.4.so: undefined reference to `Glib::ustring::ustring(std::string const&)' /usr/lib/gcc/x86_64-pc-linux-gnu/5.4.0/../../../../lib64/libgtkmm-2.4.so: undefined reference to `Glib::ustring::ustring(std::string&&)' collect2: error: ld returned 1 exit status make[3]: *** [Makefile:6906: inkview] Error 1 make[3]: Leaving directory '/var/tmp/portage/media-gfx/inkscape-0.91- r3/work/inkscape-0.91/src' make[2]: *** [Makefile:5059: all] Error 2 make[2]: Leaving directory '/var/tmp/portage/media-gfx/inkscape-0.91- r3/work/inkscape-0.91/src' make[1]: *** [Makefile:1411: all-recursive] Error 1 make[1]: Leaving directory '/var/tmp/portage/media-gfx/inkscape-0.91- r3/work/inkscape-0.91' make: *** [Makefile:1107: all] Error 2 * ERROR: media-gfx/inkscape-0.91-r3::gentoo failed (compile phase): * emake failed Could it be that gcc-5.4 isn't yet ripe enough for mass consumption? -- Regards, Mick signature.asc Description: This is a digitally signed message part.
Re: [gentoo-user] Icon Editor???
Masood Ahmed masood.ahme...@gmail.com [09-06-01 17:12]: meino.cra...@gmx.de writes: Hi, I am trying to create button screens and such stuff for a touch enabbles LCD of 160x80 pixels (pure black and white). Unfortunately I couldn't convince gimp to set black pixels when using Indexed mode... And converting an rgb/grayscaled picture to b/w is no option, since on a 160x80 screen this would result in broken lines and such... I there any Icon-Editor which is able to handle text (kiconeditor can't do that) and the other more general graphical drawing operations? Or any other application with which I could acchieve what I want? Thank you very much for any help in advance! Try Inkscape Regards, Masood Ahmed Hi Masood, thanks for your reply...I tried InkScape but it is not able to reduce drawing to pure b/w. Regards, Meino Cramer -- Microsoft does have a Y2K problem... it's called Linux! -- Please don't send me any Word- or Powerpoint-Attachments unless it's absolutely neccessary. - Send simply Text. See http://www.gnu.org/philosophy/no-word-attachments.html In a world without fences and walls nobody needs gates and windows.
Re: [gentoo-user] Good diagram app
Bruno Lustosa wrote: Take a look at Inkscape. Many very nice features, some overlap with dia, some quite different. I emerged inkscape, but it's not quite what I need. Need something to draw flowcharts and diagrams. KOffice has just expanded with a new diagram tool called kivio . It looked pretty good, almost made me wish I had some use for a diagram tool. Will emerge koffice to have a look at it. Thank you two. Try with DIA ;-) -- Email.it, the professional e-mail, gratis per te: http://www.email.it/f Sponsor: Scarica Sweety e la Rana Pazza sul tuo cellulare. * La prima suoneria è GRATIS! Clicca qui: http://adv.email.it/cgi-bin/foclick.cgi?mid=3537d=31-5 -- gentoo-user@gentoo.org mailing list
[gentoo-user] Re: Does skencil work for anybody else?
On 2010-03-12, Keith Dart ke...@dartworks.biz wrote: === On Fri, 03/12, Grant Edwards wrote: === Does skencil work for anybody else? You should probably be using inkscape instead. I was afraid of that. Inkscape is a bloated monster that's going to pull in another dozen or two packages. I guess if that's the only choice... I'm not sure skencil is maintained. Apparently not. There's a fork named sk1 that's still somewhat active, but it's got its own problem. Most notably, there's no batch-mode export. There's a program called uniconvertor that supposedly uses the sk1 engine to convert between various vector graphics files, but it can't even read an sk1 file. BTW, I have the exact same problem with skencil. Apparently skencil is not compatible with tk 8.5. -- Grant Edwards grant.b.edwardsYow! ... I want to perform at cranial activities with gmail.comTuesday Weld!!
[gentoo-user] Re: Does skencil work for anybody else?
On 2010-03-12, Grant Edwards grant.b.edwa...@gmail.com wrote: On 2010-03-12, Keith Dart ke...@dartworks.biz wrote: === On Fri, 03/12, Grant Edwards wrote: === Does skencil work for anybody else? You should probably be using inkscape instead. I was afraid of that. Inkscape is a bloated monster that's going to pull in another dozen or two packages. I guess if that's the only choice... I'm not sure skencil is maintained. Apparently not. There's a fork named sk1 that's still somewhat active, but it's got its own problem. After attempting to use sk1 for a few minutes, I've given up on it. It crashes regularly. Exporting to a .eps file just plain doesn't work (it writes 'sk1' format data to the file). The user interface is full of breakage: if you export a drawing and then do a 'save', it overwrites the _exported_ file rather than saving in the original drawing file. It also spews a constant stream of errors and tracebacks when doing anything at all. -- Grant Edwards grant.b.edwardsYow! Look into my eyes and at try to forget that you have gmail.coma Macy's charge card!
[gentoo-user] Re: Does skencil work for anybody else?
On 2010-03-13, Willie Wong ww...@math.princeton.edu wrote: On Fri, Mar 12, 2010 at 07:54:35PM +, Grant Edwards wrote: After attempting to use sk1 for a few minutes, I've given up on it. It crashes regularly. Exporting to a .eps file just plain doesn't work (it writes 'sk1' format data to the file). The user interface is full of breakage: if you export a drawing and then do a 'save', it overwrites the _exported_ file rather than saving in the original drawing file. It also spews a constant stream of errors and tracebacks when doing anything at all. Now this is interesting, inkscape apparently depends on skencil for postscript support? Looks that way, though I'm not sure exactly what it uses skencil for. I would have sworn I had inkscape installed without skencil and could still export to EPS. Somehow this doesn't bode well to me... Nope. -- Grant
Re: [gentoo-user] Inkscape failed to compile...(update from this morning)
On Sunday, 28 October 2018 06:46:37 GMT tu...@posteo.de wrote: > On 10/28 04:13, Adam Carter wrote: > > On Sun, Oct 28, 2018 at 4:08 PM Adam Carter wrote: > > > On Sun, Oct 28, 2018 at 3:41 PM wrote: > > >> Hi, > > > > > >> while syncing/updateing my system, inkscape failed to compile: > > > Nikos posted about cairo issue recently that revdep-rebuild didnt fix. I > > > had a similar issue with different software. In my case; > > > > > > emerge -1 x11-libs/cairo dev-cpp/cairomm dev-python/pycairo > > > > > > Fixed it. Not sure which package was the problem. > > > > dev-cpp/cairomm seems like the most likely candidate as its files are > > mentioned in Nikos' and your build errors, so try rebuilding that one > > first. > Hi, > > reemergeing cairomm fixes the problem! > Many thanks for that solution! :) > > Unfortunately I emerged and forget the '-1'...is there a > way to fix that? emerge --deselect cairomm. -- Regards, Peter.
Re: [gentoo-user] Inkscape failed to compile...(update from this morning)
On 10/28 04:13, Adam Carter wrote: > On Sun, Oct 28, 2018 at 4:08 PM Adam Carter wrote: > > > On Sun, Oct 28, 2018 at 3:41 PM wrote: > > > >> > >> Hi, > >> > >> while syncing/updateing my system, inkscape failed to compile: > >> > > > > Nikos posted about cairo issue recently that revdep-rebuild didnt fix. I > > had a similar issue with different software. In my case; > > > > emerge -1 x11-libs/cairo dev-cpp/cairomm dev-python/pycairo > > > > Fixed it. Not sure which package was the problem. > > > > dev-cpp/cairomm seems like the most likely candidate as its files are > mentioned in Nikos' and your build errors, so try rebuilding that one first. Hi, reemergeing cairomm fixes the problem! Many thanks for that solution! :) Unfortunately I emerged and forget the '-1'...is there a way to fix that? Cheers! Meino
Re: [gentoo-user] Re: Experiences with Flatpak?
On Fri, Jan 25, 2019 at 1:17 PM Nikos Chantziaras wrote: > On 25/01/2019 20:48, Grant Edwards wrote: > > But, flatpak isn't in the standard portage tree, so you have to use an > > overlay or local repo. > > > > This is beginning to look like a lot of work. > > > > Is it practical to use flatpak apps on Gentoo? > > I was using it for a while. Not anymore. > > It does exactly what it says on the box. However, GUI applications > installed in flatpak will completely ignore your desktop settings. > flatpak comes with its own gtk/qt/gnome/kde libraries and its own > completely separate settings for the desktop environment. > > This is why I'm not using it anymore. GUI apps look like ass. > That's weird; they look fine for me [1,2]. As yo say, they have different configurations (every application runs in an individual container), but the both look normal. Regards. [1] https://aztlan.fciencias.unam.mx/~canek/inkscape-gentoo.jpg [2] https://aztlan.fciencias.unam.mx/~canek/inkscape-flatpak.jpg -- Dr. Canek Peláez Valdés Profesor de Carrera Asociado C Departamento de Matemáticas Facultad de Ciencias Universidad Nacional Autónoma de México
Re: [gentoo-user] Installed over and over again: Imagemagick
On 12/11 05:55, Neil Bothwick wrote: > On Wed, 11 Dec 2019 12:49:01 -0500, Jack wrote: > > > > package.use/inkscape:media-gfx/inkscape jpeg nls openmp cdr dbus dia > > > exif -gnome imagemagick inkjar latex lcms postscript visio wpg > > > PYTHON_TARGETS="python2_7") > > > > > > > > > Cheers! > > > mcc > > I'm curious why you have the PYTHON_TARGET set for imagemagick. I > > don't see any mention of python anywhere in any of the imagemagick > > ebuilds, and "emerge -p imagemagick" doesn't say anything about python. > > He doesn't, it is set for inkscape. However, that trailing ) shouldn't be > there. I doubt it is the cause of the problem, but it's worth cleaning up > anyway. > > > -- > Neil Bothwick > > WinErr 683: Time out error - Operator fell asleep while waiting for the > system to complete boot procedure. I removed the ')' and updated again (did this aboyt 2h before). The onlu one, which ich being emerged is imagemagick... But I saw this again: WARNING: One or more updates/rebuilds have been skipped due to a dependency conflict: media-gfx/imagemagick:0 (media-gfx/imagemagick-7.0.9.7:0/7.0.9::gentoo, ebuild scheduled for merge) conflicts with
Re: [gentoo-user] Installed over and over again: Imagemagick
On 2019.12.11 13:12, tu...@posteo.de wrote: On 12/11 05:55, Neil Bothwick wrote: > On Wed, 11 Dec 2019 12:49:01 -0500, Jack wrote: [snip...] The onlu one, which ich being emerged is imagemagick... But I saw this again: WARNING: One or more updates/rebuilds have been skipped due to a dependency conflict: media-gfx/imagemagick:0 (media-gfx/imagemagick-7.0.9.7:0/7.0.9::gentoo, ebuild scheduled for merge) conflicts with (media-gfx/inkscape-1.0_beta2:0/0::gentoo, installed) ^ ^ (media-gfx/inkscape-1.0_beta2:0/0::gentoo, installed) ^ ^ Cheers! Well, that does seem relevant. Since you accept testing versions, it wants to upgrade to 7.0.9.0, but inkskape prevents that, as it requires a version less than 7. As Dale pointed out, you do need to have the cxx use flag set for imagemagick, but I suspect you do, or portage would complain even more. What is not clear to me is why it insists on reinstalling 6.10.9.77 just because it can't upgrade. Does anyone think it might be a (subtle or not so) bug in portage? Jack
Re: [gentoo-user] Drafting or simple blue print creation
[EMAIL PROTECTED] ha scritto: Searching with `eix -S draw' Dredges up a lot of hits I'm looking for something to help me draw a simple mechanical drawing. Just a wooden rack for a 5th wheel flat top trailer. The only linux type tool I've ever used for something like that was xfig and that was several yrs ago. Is xfig still the best thing for something like that? Try qcad or inkscape. m. -- gentoo-user@lists.gentoo.org mailing list
[gentoo-user] OT: Choosing a graphics tablet
Hi list! I'm thinking about buying a graphics tablet to facilitate my work with Dia and Inkscape. The price tag should be below EUR 100. At the moment, I'm wondering if I should go with a Wacom or an Aiptek. Are they similarly good (bad?) supported on Linux? Any gotchas with xorg-server-1.5.3's new don't configure me, I configure you mentality? Thanks in advance! Florian Philipp signature.asc Description: OpenPGP digital signature
Re: [gentoo-user] Good diagram app
On Tue, 31 May 2005, Bruno Lustosa wrote: Hello. I am in need of an application like Visio. I tried messing with dia, but it's still far from what I need, for it lacks lots of useful features. What program do the list recommend? Take a look at Inkscape. Many very nice features, some overlap with dia, some quite different. www.inkscape.org -- gentoo-user@gentoo.org mailing list
[gentoo-user] gentoo extras cd
Hi All, Ive been using Gentoo PPC for a while, and as a dial-up user find to difficult to download all the packages i want(just takes to long), is there anything like the Packages CD but more :) Does anyone know if a 3rd party/or gentoo provides such a thing? I don't mind paying for such a CD/DVD. ie. So i can just emerge -K inkscape etc..., all the useful desktop type packages that aren't included in the packages CD. Thanks, any help would be greatly appreciated. Justin Kelly -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] inkscape emerge
On Fri, Oct 7, 2011 at 2:38 PM, Michael Mol mike...@gmail.com wrote: Remove the -p to have portage go ahead and try to remove them. (But you might see something you want to have remain, which is why you should use -p first) Or use -a instead of -p. That way it asks you if you want to proceed after showing what it would do, and if you say yes you don't have to wait for it to recalculate everything again. :)
[gentoo-user] problem with gimp, firefox and inkscape
Hi, I've a strange problem with some of my applications. the problem is when I want open a file in inkscape or gimp, or when I want to select a file in firefox to attach the select file appears and then the whole application crashes with this error: Emergency save completed. Inkscape will close now. If you can reproduce this crash, please file a bug at www.inkscape.org with a detailed description of the steps leading to the crash, so we can fix it. Segmentation fault or gimp: (script-fu:24851): LibGimpBase-WARNING **: script-fu: gimp_wire_read(): error Segmentation fault I've also done two sync and also deep-new_use update and tried revdev- rebuild which they did nothing. I also ran a memtest to check if faulty memory is the reason. But all the test passed without any problem. I don't have any problem with kde applications and also OpenOffice or Vlc. It seems that it is a gtk problem. I can open files when I pass them as a command line argument. I've opened a bug few days ago. But it seem that I'm the only one that have this problem. No one made any comment or voted for my bug. this is getting a little bit annoying. Specially in Firefox. https://bugs.gentoo.org/show_bug.cgi?id=287709 Would anyone give me a clue what the problem is? Best Regards Platoali
Re: [gentoo-user] dev-libs/efl-1.18.4 fails to emerge with gcc-5.4.0-r3
Mick wrote: On Tuesday 18 Apr 2017 16:47:25 Mick wrote: OK, I tried updating poppler to 0.52.0 which then wanted to re-emerge inkscape, but inkscape failed too: Could it be that gcc-5.4 isn't yet ripe enough for mass consumption? I don't think so, I haven't had any of your problems (but I don't have neither efl nor inkscape installed): $ qlop -l gcc | grep 5.4.0 Tue Jun 14 15:11:34 2016 >>> sys-devel/gcc-5.4.0 Tue Jun 14 18:36:37 2016 >>> sys-devel/gcc-5.4.0 Wed Jun 15 02:08:41 2016 >>> sys-devel/gcc-5.4.0 Tue Jun 28 13:47:11 2016 >>> sys-devel/gcc-5.4.0 Mon Jan 9 11:09:27 2017 >>> sys-devel/gcc-5.4.0-r2 Mon Feb 6 11:13:35 2017 >>> sys-devel/gcc-5.4.0-r3 Wed Feb 22 00:11:41 2017 >>> sys-devel/gcc-5.4.0-r3 I don't have other suggestions, sorry. raffaele
Re: [gentoo-user] Installed over and over again: Imagemagick
On Wed, 11 Dec 2019 14:49:15 -0500, Jack wrote: > > WARNING: One or more updates/rebuilds have been skipped due to a > > dependency conflict: > > > > media-gfx/imagemagick:0 > > > > (media-gfx/imagemagick-7.0.9.7:0/7.0.9::gentoo, ebuild scheduled > > for merge) conflicts with > > > (media-gfx/inkscape-1.0_beta2:0/0::gentoo, installed) > > ^ ^ > > > (media-gfx/inkscape-1.0_beta2:0/0::gentoo, installed) > > ^ ^ > > > > Cheers! > Well, that does seem relevant. Since you accept testing versions, it > wants to upgrade to 7.0.9.0, but inkskape prevents that, as it requires > a version less than 7. As Dale pointed out, you do need to have the > cxx use flag set for imagemagick, but I suspect you do, or portage > would complain even more. What is not clear to me is why it insists on > reinstalling 6.10.9.77 just because it can't upgrade. Does anyone > think it might be a (subtle or not so) bug in portage? That's the odd part. The warning is just that, it is portage telling you why it is not upgrading imagemagick to the latest version. I can't see anything in the output you have posted that explains portage's desire to continually reinstall the same version of imagemagick. I think it was suggested earlier, but have you tried setting the graphicsmagick flag for inkscape? -- Neil Bothwick "There's more to life than sex, beer and computers. Not a lot more admittedly..." pgpB6bmkcu5ip.pgp Description: OpenPGP digital signature
[gentoo-user] inkscape won't start
So, it used to work, but now I get this:
(inkscape:456): gtkmm-CRITICAL **:
voidunnamed::container_foreach_callback(GtkWidget*, void*): assertion
`widget != 0' failed
Emergency save activated!
Emergency save completed. Inkscape will close now.
If you can reproduce this crash, please file a bug at www.inkscape.org
with a detailed description of the steps leading to the crash, so we can fix
it
So I figure something needed is missing.
msoul...@anton:~$ revdep-rebuild --pretend
* Configuring search environment for revdep-rebuild
* Checking reverse dependencies
* Packages containing binaries and libraries broken by a package update
* will be emerged.
* Collecting system binaries and libraries
* Generated new 1_files.rr
* Collecting complete LD_LIBRARY_PATH
* Generated new 2_ldpath.rr
* Checking dynamic linking consistency
[ 100% ]
* Dynamic linking on your system is consistent... All done.
Hmm. Not according to revdep-rebuild.
So, lets try to rebuild it.
msoul...@anton:~$ sudo emerge media-gfx/inkscape
Password:
Calculating dependencies... done!
[ebuild N] dev-libs/poppler-0.10.7 USE=abiword poppler-data
[ebuild N] dev-libs/poppler-glib-0.10.7 USE=cairo
[uninstall] app-text/poppler-bindings-0.10.5-r1
[blocks b ] dev-libs/poppler (dev-libs/poppler is blocking
app-text/popple
r-bindings-0.10.5-r1, app-text/poppler-0.10.5-r1)
[blocks b ] app-text/poppler-bindings (app-text/poppler-bindings is
blocki
ng dev-libs/poppler-glib-0.10.7, dev-libs/poppler-0.10.7)
[blocks b ] dev-libs/poppler-glib (dev-libs/poppler-glib is blocking
app-t
ext/poppler-bindings-0.10.5-r1, app-text/poppler-0.10.5-r1)
[ebuild U ] virtual/poppler-glib-0.10.7 [0.10.5]
[ebuild R ] media-gfx/inkscape-0.46-r5
[blocks B ] app-text/poppler (app-text/poppler is blocking
dev-libs/popple
r-glib-0.10.7, dev-libs/poppler-0.10.7)
[blocks B ] dev-libs/poppler (dev-libs/poppler is blocking
app-text/popple
r-bindings-0.10.5-r1, app-text/poppler-0.10.5-r1)
[blocks B ] dev-libs/poppler-glib (dev-libs/poppler-glib is blocking
app-t
ext/poppler-bindings-0.10.5-r1, app-text/poppler-0.10.5-r1)
* Error: The above package list contains packages which cannot be
* installed at the same time on the same system.
('ebuild', '/', 'dev-libs/poppler-glib-0.10.7', 'merge') pulled in by
~dev-libs/poppler-glib-0.10.7[cairo] required by ('installed', '/',
'media-g
fx/gimp-2.6.4', 'nomerge')
~dev-libs/poppler-glib-0.10.7[cairo] required by ('ebuild', '/',
'virtual/po
ppler-glib-0.10.7', 'merge')
~dev-libs/poppler-glib-0.10.7[cairo] required by ('ebuild', '/',
'media-gfx/
inkscape-0.46-r5', 'merge')
('installed', '/', 'app-text/poppler-0.10.5-r1', 'nomerge') pulled in by
~app-text/poppler-0.10.5 required by ('installed', '/',
'app-text/xpdf-3.02-
r2', 'nomerge')
~app-text/poppler-0.10.5 required by ('installed', '/',
'app-office/openoffi
ce-3.0.0', 'nomerge')
~app-text/poppler-0.10.5 required by ('installed', '/',
'dev-tex/luatex-0.30
.3', 'nomerge')
(and 1 more)
Wow. How'd I get in this state?
I'm not completely up-to-date, so I'm going to update world first, but there's
no update to inkscape or poppler mentioned in that.
This seems like a full-time job.
Mike
--
Michael P. Soulier msoul...@digitaltorque.ca
Any intelligent fool can make things bigger and more complex... It takes a
touch of genius - and a lot of courage to move in the opposite direction.
--Albert Einstein
pgpI5isNYqaqE.pgp
Description: PGP signature
Re: [gentoo-user] Don't disable 'introspection'
Am 17.07.2015 um 00:31 schrieb Canek Peláez Valdés: On Thu, Jul 16, 2015 at 3:53 PM, walt w41...@gmail.com mailto:w41...@gmail.com wrote: I don't understand 'introspection' enough to know why we need it, but apparently we do, so don't use the -introspection useflag like I did. The trouble I introduced a few weeks ago when I disabled introspection was subtle enough that I didn't realize until yesterday that I even had a problem. Portage had been doing mildly insane things that other people were not seeing, so as a test I removed the -introspection useflag and spent the entire day rebuilding packages. My portage problem appears to be fixed. I hope. If anyone can splain what introspection does I'd be grateful. Alan did a fine job explaining what introspection is in general. In Gentoo, the introspection flag is only used by GObject based libraries; all the languages that natively supports introspection does it inconditionally, and (as far as I am aware) GObject is the only C object oriented library that provides introspection. Some years ago, you could get away without activating it, but nowadays is for all practical purposes mandatory. At least this is the case for GNOME 3; but I would not be surprised if it's also the case for basically any GObject based software; that covers all GTK+ 2 and 3 applications. The instrospection infrastructure is not only used (as Alan mentioned) to look inside a compiled class; it's also part of the automatic binding generation for other programming languages used by all GObject libraries (or at lest that's what I understand, please correct me if I'm wrong). Therefore, if you use Inkscape, for example, you'll need introspection since Inkscape is wrote in C++ using the gtk-- bindings. In general, I would recommend not to set USE=-* (an opinion shared by basically all Gentoo devs and most rational people), and let the default use flags to do their magic. But everyone is free to break their systems as they please. Regards. -- Canek Peláez Valdés Profesor de asignatura, Facultad de Ciencias Universidad Nacional Autónoma de México I have had -introspection set for ages in make.conf. It is turned on for some selected packages in package.use I use inkscape I don't use gnome I don't use systemd My system is fine.
Re: [gentoo-user] Icon Editor???
meino.cra...@gmx.de writes: Hi, I am trying to create button screens and such stuff for a touch enabbles LCD of 160x80 pixels (pure black and white). Unfortunately I couldn't convince gimp to set black pixels when using Indexed mode... And converting an rgb/grayscaled picture to b/w is no option, since on a 160x80 screen this would result in broken lines and such... I there any Icon-Editor which is able to handle text (kiconeditor can't do that) and the other more general graphical drawing operations? Or any other application with which I could acchieve what I want? Thank you very much for any help in advance! Try Inkscape Regards, Masood Ahmed -- Microsoft does have a Y2K problem... it's called Linux!
Re: [gentoo-user] Good diagram app
[EMAIL PROTECTED] schreef: On Tue, 31 May 2005, Bruno Lustosa wrote: Hello. I am in need of an application like Visio. I tried messing with dia, but it's still far from what I need, for it lacks lots of useful features. What program do the list recommend? Take a look at Inkscape. Many very nice features, some overlap with dia, some quite different. www.inkscape.org KOffice has just expanded with a new diagram tool called kivio . It looked pretty good, almost made me wish I had some use for a diagram tool. HTH, Holly -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Linux design software recommendations
Does anyone have any recommendations for something similar to what I'm describing, or had success with other software that can do some of what I want? there's no professional CAD for linux, especially for woodworking: http://www.ribbonsoft.com/de/qcad.html A commercial solution is VariCAD, but it's mainly for the engineering market. Besides xfig, there's qcad, a simple 2D only CAD system. You can even try Inkscape CVS which supports snapping to object borders and edges. There has been a specialized woodworking CAD called LignumCAD, but the author stopped some years ago due to some real life circumstances. See lingunmcad.sf.net for details. It's 3D, uses openGL for rendering and mainly consists of a set of parametric objects. Best regards ce -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Recommend a program for line art and text
Hi, On Mon, 29 Jan 2007 15:26:37 -0800 Kevin O'Gorman [EMAIL PROTECTED] wrote: I've tried creating diagrams in xfig. It works fine for my LaTeX documents, but does not export well to PNG for use in web pages. Hm, what do you mean by saying not so well? If it's just that it isn't antialiased as good as you'd like it to be, then just export it at higher resolution and scale it down with some pix-image tool afterwards. Aside from that, it really depends on what diagrams you're creating. Personally, I turned away from xfig a bit, but that's mostly due to its interface. I like dia for flow-charts and similar stuff and inkscape for more graphic intensive stuff. -hwh -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] gentoo extras cd
Hi, I know that for x86/AMd 64 there is a Packages CD. Try searching on your country mirrors for the CD. Best regards, Cristi Stoica Justin Kelly wrote: Hi All, Ive been using Gentoo PPC for a while, and as a dial-up user find to difficult to download all the packages i want(just takes to long), is there anything like the Packages CD but more :) Does anyone know if a 3rd party/or gentoo provides such a thing? I don't mind paying for such a CD/DVD. ie. So i can just emerge -K inkscape etc..., all the useful desktop type packages that aren't included in the packages CD. Thanks, any help would be greatly appreciated. Justin Kelly -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Re: Does skencil work for anybody else?
On Fri, Mar 12, 2010 at 07:54:35PM +, Grant Edwards wrote: After attempting to use sk1 for a few minutes, I've given up on it. It crashes regularly. Exporting to a .eps file just plain doesn't work (it writes 'sk1' format data to the file). The user interface is full of breakage: if you export a drawing and then do a 'save', it overwrites the _exported_ file rather than saving in the original drawing file. It also spews a constant stream of errors and tracebacks when doing anything at all. Now this is interesting, inkscape apparently depends on skencil for postscript support? Somehow this doesn't bode well to me... W -- Willie W. Wong ww...@math.princeton.edu Data aequatione quotcunque fluentes quantitae involvente fluxiones invenire et vice versa ~~~ I. Newton
Re: [gentoo-user] Re: inkscape emerge
Grant Edwards wrote: On 2011-10-07, Michael Molmike...@gmail.com wrote: Remove the -p to have portage go ahead and try to remove them. (But you might see something you want to have remain, which is why you should use -p first) If you do see packages that you want to keep, but aren't required by anything else, you can manually add them to your world file (usually /var/lib/portage/world) to protect them from removal by emerge --depclean in the future. IIRC, I had to do that to keep portage from removing Python 2 a while back. or just use emerge -n package name. Same thing plus portage puts it in alphabetical order too. ;-) Dale :-) :-)
[gentoo-user] Add hyperlinks to PDF?
Is there any open source tool to add hyperlinks to a PDF? I've scanned a manual of mine to put on my tablet and used pdftk to assemble all the individual PDFs and generate bookmarks, but it doesn't seem to be able to add links. All I'm trying to do is link to pages in the same PDF. libreoffice imports a PDF but it doesn't import the bookmarks properly, so on export everything is overwritten. I'm not trying to modify the pages (i.e. the text) itself, just add links. I'm currently compiling inkscape, but I've read it "imports" PDF so I'm not so hopeful it will work as my experience with libreoffice wasn't so good. Dan
Re: [gentoo-user] Troubles setting USE flag for inkscape
On Saturday, 25 April 2020 17:02:05 BST Michael Orlitzky wrote: > On 4/25/20 11:55 AM, tu...@posteo.de wrote: > > ## ... PYTHON_SINGLE_TARGET="python3_6 python3_8 -python3_7" > > ## > > ##The following REQUIRED_USE flag constraints are unsatisfied: > > ## exactly-one-of ( python_single_target_python3_6 > > python_single_target_python3_7 python_single_target_python3_8 ) > "Single target" means you've gotta pick just one. eselect python update/cleanup options should help you move along with this package without having to set up a specific single python target for it. Let it inherit the system version. signature.asc Description: This is a digitally signed message part.
Re: [gentoo-user] Re: Troubles setting USE flag for inkscape
On Sat Apr 25 20:33:36 2020, tu...@posteo.de wrote: > > Hi Remy, > > that helped ! > > To be honest ... I never had deduced this from the error message. > Is this pure experience...somehing one had to learn after uears > of trying to cope with The Portage Oracle...or is it one has > and the other one has not...? ;) > > ...or what manual do I need to read to up with this line? For the "Oracle" output of portage: ##The following REQUIRED_USE flag constraints are unsatisfied: ##exactly-one-of ( python_single_target_python3_6 python_single_target_python3_7 python_single_target_python3_8 ) ^^ So "exactly one of the listed use flags". For the documentation on syntax: "man portage" and go to the "package.use" section or visit https://wiki.gentoo.org/wiki//etc/portage/package.use
Re: [gentoo-user] Recommend a program for line art and text
On 1/30/07, Hans-Werner Hilse [EMAIL PROTECTED] wrote: Hi, On Mon, 29 Jan 2007 15:26:37 -0800 Kevin O'Gorman [EMAIL PROTECTED] wrote: I've tried creating diagrams in xfig. It works fine for my LaTeX documents, but does not export well to PNG for use in web pages. Hm, what do you mean by saying not so well? If it's just that it isn't antialiased as good as you'd like it to be, then just export it at higher resolution and scale it down with some pix-image tool afterwards. Aside from that, it really depends on what diagrams you're creating. Personally, I turned away from xfig a bit, but that's mostly due to its interface. I like dia for flow-charts and similar stuff and inkscape for more graphic intensive stuff. -hwh Fooling with bitmap resolutions gives me a headache, and I havent' figured out how to make it look good on screen and also good when printed. My students print my pages a lot. Thanks for Inkscape, tho -- it is perfect for me. I like the interface, and since it saves in SVG format, I get web pages without the intermediate bitmap bother. The results are much better ++ kevin -- Kevin O'Gorman, PhD
Re: [gentoo-user] conflict in update
Michael P. Soulier wrote:
I'm trying to understand the explanation of this but I don't quite see it. It
looks like conflicting libraries used by gimp, inkscape and openoffice.
I don't quite understand the explanation, and what my options are.
Translation appreciated.
Thanks,
Mike
msoul...@anton:~$ emerge --pretend --update --deep world
These are the packages that would be merged, in order:
Calculating dependencies... done!
[ebuild U ] dev-libs/libassuan-1.0.5 [1.0.4]
[ebuild U ] dev-lang/python-2.5.4-r2 [2.5.2-r7] USE=xml%*
[ebuild U ] dev-python/setuptools-0.6_rc9 [0.6_rc8-r1]
[ebuild U ] app-text/poppler-0.10.5-r1 [0.10.4]
[ebuild U ] app-text/poppler-bindings-0.10.5-r1 [0.10.4]
[ebuild U ] app-crypt/gnupg-2.0.11 [2.0.10]
[ebuild U ] dev-python/pygtk-2.14.1 [2.14.0]
!!! Multiple package instances within a single package slot have been pulled
!!! into the dependency graph, resulting in a slot conflict:
app-text/poppler-bindings:0
('installed', '/', 'app-text/poppler-bindings-0.10.4', 'nomerge') pulled in
by
~app-text/poppler-bindings-0.10.4[gtk,cairo] required by ('installed',
'/', 'media-gfx/gimp-2.6.4', 'nomerge')
~app-text/poppler-bindings-0.10.4[gtk,cairo] required by ('installed',
'/', 'virtual/poppler-glib-0.10.4', 'nomerge')
~app-text/poppler-bindings-0.10.4[gtk,cairo] required by ('installed',
'/', 'media-gfx/inkscape-0.46-r5', 'nomerge')
(and 1 more)
('ebuild', '/', 'app-text/poppler-bindings-0.10.5-r1', 'merge') pulled in by
app-text/poppler-bindings required by world
Explanation:
New USE for 'app-text/poppler-bindings:0' are incorrectly set. In
order to solve this, adjust USE to satisfy '~app-text/poppler-
bindings-0.10.4[gtk,cairo]'.
It tells you what todo:
emerge app-text/poppler-bindings-0.10.4
with USE=gtk cairo
check that if it solves the problem
Re: [gentoo-user] Editing PDF and/or postscript
Justin R Findlay wrote: On Tue, Jun 13, 2006 at 05:54:00PM -0400, JimD wrote: Are there any tools/editors to edit a pdf or ps file? I am digitizing some books. I have the books as pdf and can convert that to postscript, text, html. I would like to be able to insert a few graphics into the PDF files. I could convert to plain text, edit in OOo and export to PDF. However, I lose all formatting doing that. I was hoping there were tools/editors for PDF/PS. What the heck do book writers use? I hope not a word processor. I am only working with small books and it is a pain to have to deal with layout. You could open it up in vi and guess about what's going on, or you could learn the postscript language. (: Otherwise, there's inkscape and scribus that will write to PDF. I don't know what's so hard about reading in PDF files if you can write out to them. Good luck. Justin Thanks Justin. I am going to give scribus/inkscape a shot. Jim -- =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- You roll an 18 in Dex and see if you don't end up with a girlfriend =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- JimD Central FL, USA, Earth, Sol -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Editing PDF and/or postscript
JimD wrote: Justin R Findlay wrote: On Tue, Jun 13, 2006 at 05:54:00PM -0400, JimD wrote: Are there any tools/editors to edit a pdf or ps file? I am digitizing some books. I have the books as pdf and can convert that to postscript, text, html. I would like to be able to insert a few graphics into the PDF files. I could convert to plain text, edit in OOo and export to PDF. However, I lose all formatting doing that. I was hoping there were tools/editors for PDF/PS. What the heck do book writers use? I hope not a word processor. I am only working with small books and it is a pain to have to deal with layout. You could open it up in vi and guess about what's going on, or you could learn the postscript language. (: Otherwise, there's inkscape and scribus that will write to PDF. I don't know what's so hard about reading in PDF files if you can write out to them. Good luck. Justin Thanks Justin. I am going to give scribus/inkscape a shot. Jim If it helps any, Scribus is a lot like Quark, that real expensive program that newspapers and magizines use. It takes a bitof getting used to but it does a really good job. Dale :-) :-) -- gentoo-user@gentoo.org mailing list
