Re: [NTG-context] TABLEproblem
On Thu, 7 Sep 2006, Bernd Militzer wrote:
Hi all,
after I installed ConTeXt (TeXExec | version 6.2.0 - 1997-2006 - PRAGMA
ADE/POD) om my MacMini my family-project does not compile any more.
With version 5.2.4 -1967-2005 (linux resp. PowerBook) I have no problems.
systems : begin file TestFile at line 731
TestFile-PID0134-A.tmp
(/usr/local/teTeX/share/texmf.local/tex/context/base/pdfr-ec.tex)
section : 1 \getPID {134}
(./TestFile-PID0134-A.tmp
Underfull \vbox (badness 1) detected at line 12
references : unknown reference [][PID135dat]
references : unknown reference [][PID67dat]
references : unknown reference [][PID268dat]
references : unknown reference [][PID269dat]
references : unknown reference [][PID134adat]
! Misplaced \noalign.
\TABLEnoalign -\noalign
\bgroup \let \noalign \relax \let \next =
\insertTABLEtail -\TABLEnoalign
{\global \settrue \preventTABLEbreak
\globa...
\stoptables ...erepeattail \else \insertTABLEtail
\fi \finishTABLE \egroup
\...
\StopPersDatTab -\stoptables
\stop
l.25 \StopPersDatTab
?
I have no idea what to do.
every hint is welcome.
Thanks for help.
Looks like tables want the first row to contain a \SR. I get the same
error with the more simple
\starttext
\starttables[|l|l|]
\NC A \NC B \NC\AR
\stoptables
\stoptext
Replace \AR by \SR and everything works fine. I do not usually use
tables, so I do not know if this is a bug or a feature.
Aditya
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] multiple bibliographies
Taco, I played some more with the patched version you sent yesterday, and everything seems to be working as desired, thanks a lot! So, AFAICS, this is ready to roll and become part of the module. On Sep 6, 2006, at 8:17 AM, Taco Hoekwater wrote: This should work except that the numbers in the second \placepublications will probably restart at 1 with the current version. That would be easy to fix, so if you send me a small test file I can easily add a no-reset switch. I do not know anything about feasibility, but have a suggestion for the input syntax. How about if there is \definecitemethod[one] \definecitemethod[two] I have to think about that. It sounds useful, but I am not sure off-hand how to make it work. Cheers, Taco Aditya, thanks for your suggestion. This would allow us not only to have per-chapter bibliographies, but several bibliographies, if I understand you right? Would be a very useful thing, I agree, but the solution for my question turned out to be a lot easier. Thanks, and best Thomas ___ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] listoffloats question
Hans Hagen schrieb:
richard rascher-friesenhausen wrote:
Willi Egger schrieb:
Hi,
with Context 2006.08.08 there is no problem with the figure-numbering.
In order to get your figure lists typeset:
\conpletelistoffigures
\completelistofafigures
\completelistofbfigures
Kind regards
Willi
Hello,
that's right, there is no problem in getting *three* lists. But i want
only *one* list, showing figures, afigures and bfigures in correct
order. I think, there must be a simple solution, but i don not find it
(There are three kinds of figures, because each of them has its own setups.)
\placelist[figures,afigures,bfigures]
-
Hans Hagen | PRAGMA ADE
Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com
| www.pragma-pod.nl
-
Now i get the following error message:
! Missing \endcsname inserted.
to be read again
\@@lifigurescriterium
\dosetfilterlevel ...l {\csname \??by \askedlevel
\endcsname }\ifx
\byaskedl...
\dosettoclevel ...alue {#1#2\c!criterium }}\empty
\else
\doifelsevaluenothin...
\doplacerawlist ...clevel \??li \firstlistelement
\honorlocalfilterlevel
\do...
\doplacelist ...ginoflist \doplacerawlist [#1][#2]
\doendoflist
to be read again
\par
l.24
I am using the latest win standalone version.
Regards
richard
--
==
Prof. Dr. Richard Rascher-Friesenhausen
MeVis Research GmbH
Universitaetsallee 29
D-28359 Bremen
als auch
Hochschule Bremerhaven, Studiengang Medizintechnik
An der Karlsstadt 8
27568 Bremerhaven
email: [EMAIL PROTECTED], [EMAIL PROTECTED]
www : http://www.mevis.de/, http://www.hs-bremerhaven.de/
fon : +49 - 421 - 218 7707 (mevis)
fax : +49 - 421 - 218 4236 (mevis)
==
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] multiple bibliographies
Thomas A. Schmitz wrote: Taco, I played some more with the patched version you sent yesterday, and everything seems to be working as desired, thanks a lot! So, AFAICS, this is ready to roll and become part of the module. Thanks for testing. I'll update contextgarden shortly. Taco ___ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] beta (31.08.2006)
Am 06.09.2006 um 23:35 schrieb Hans Hagen:
can you test the version i just uploaded and when it fails send me
a test file?
Hans
Does this beta also provide a fix for the index bug (see below)?
Steffen
If I change your testfile by one line \page test text
the output becomes really strange:
test index 2, 2, 2
...
Test file:
\starttext
\placelist[section][criterium=all] \blank[5*big]
\placeregister[index][compress=no] \blank[5*big]
\placeregister[index][compress=no,sectionnumber=yes] \blank[5*big]
\placeregister[index][compress=yes] \blank[5*big]
\page
test text \index{test index}
\section{heading}
more test text \index{test index}
\section{heading}
more test text \index{test index}
\page test text
\page
\section{heading text \index{test index}}
more test text \index{test index}
\page
test text \index{test index}
\section{heading text \index{test index}}
more test text \index{test index}
\stoptext
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
[NTG-context] resolved Font problem
Dear all, By installing TeX from the beginning and changing to new font family, CFF: Invalid caracter error was disappeared. I think that there are some problems in some korean fonts But the same file had a little problem in Powerbook G4(OS X 10.4.7). I think that it is not the problem in XeTeX, ConTeXt, but in the configuration in Terminal or in the system. Although I have little knowledge about Unix, I'll try to fix it. Thank you again for all the help. Best regards, Dalyoung ___ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] index page range bug
Jason wrote: When using startregister/stopregister commands, if the range is only one one page, then while both a [f] and a [t] are written to the tui file, only one \registerfrom command is put in the tuo file. If there is only one range, it seems like the software deals with it nicely. However, if there are two ranges (like in the example below), then the index incorrectly assumes that the first \registerfrom command in the tuo file corresponds to the \registerto command. Aha! Great work tracking this down Jason, I have been bitten by this bug many times in the past but not been able to isolate it. It would be really great if this could be fixed in the ruby script. Duncan ___ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] beta (31.08.2006)
Hans Hagen wrote: Peter Rolf wrote: Hi, just tested the new beta, but with no luck. I get the following error [. can you test the version i just uploaded and when it fails send me a test file? test file is on the way Hans - Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com | www.pragma-pod.nl - ___ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context ___ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context
[NTG-context] \setuppapersize[XY] not working properly with landscape orientation
Hello, \setuppapersize[XY] is not working properly when paper orientation is landscape. The following code results in pages of dimensions 29.5 x 29.5 cm: \setuppapersize [XY][A4,landscape] \setuppaper [nx=3,ny=1] \setuparranging [XY] \showframe \starttext second page \page last page \page first page \page content in \page the middle \page three pages \stoptext I also have an additional question: I can use \setupbackgrounds [page] [background=...] for single pages which works perfectly. But how can I place a background figure on the whole page (i.e. spanning across the middle three 'conceptual' pages, which is the second page when printed on paper) Thank you, Mojca ___ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] \setuppapersize[XY] not working properly with landscape orientation
Hi Mojca, Mojca Miklavec wrote: Hello, \setuppapersize[XY] is not working properly when paper orientation is landscape. The following code results in pages of dimensions 29.5 x 29.5 cm: \setuppapersize [XY][A4,landscape] \setuppaper [nx=3,ny=1] \setuparranging [XY] \showframe \starttext second page \page last page \page first page \page content in \page the middle \page three pages \stoptext I also have an additional question: I can use \setupbackgrounds [page] [background=...] for single pages which works perfectly. But how can I place a background figure on the whole page (i.e. spanning across the middle three 'conceptual' pages, which is the second page when printed on paper) Have you tried \setupbackgrounds[paper][background=...]? Peter Thank you, Mojca ___ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context ___ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] \setuppapersize[XY] not working properly with landscape orientation
On 9/7/06, Peter Rolf wrote: I also have an additional question: I can use \setupbackgrounds [page] [background=...] for single pages which works perfectly. But how can I place a background figure on the whole page (i.e. spanning across the middle three 'conceptual' pages, which is the second page when printed on paper) Have you tried \setupbackgrounds[paper][background=...]? I didn't know about that before. Now I tried it, but it had no effect. Thanks anyway, Mojca ___ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context
[NTG-context] beta: problems including a figure without providing explicit dimensions
Hello, I have no idea which version I had installed before that, but after upgrading to the latest beta and using an image filename.pdf the following creates an error: \externalfigure[filename] (worked OK before), while \externalfigure[filename][width=3cm] works OK. Here's the log: figures : dimensions of KI are determined externally Error: PDF version 1.6 -- xpdf supports version 1.5 (continuing anyway) Warning: pdftex.exe (file ./img/uni-lj.pdf): pdf inclusion: found pdf version 1.6, but at most version 1.5 allowed ./img/uni-lj.pdf Warning: pdftex.exe (file ./img/uni-lj.pdf): pdf inclusion: Page Group detected which pdfTeX can't handle. Ignoring it. figures : dimensions of uni-lj are determined externally ! Missing number, treated as zero. to be read again @ \finalscaleboxwidth -@ @efwidth \prepackageexternalfigureobject ...lscaleboxwidth \global \ht \foundexternal... \calculateexternalfigure ...eexternalfigureobject \pushpublicfigurevariables... argument ...setfigure ][\s!dummy ][uni-lj][][][] \calculateexternalscreenfi... \firstofoneargument #1-#1 ... l.120 \hfill Thanks, Mojca ___ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] \setuppapersize[XY] not working properly with landscape orientation
Mojca Miklavec wrote:
On 9/7/06, Peter Rolf wrote:
I also have an additional question: I can use
\setupbackgrounds
[page]
[background=...]
for single pages which works perfectly. But how can I place a
background figure on the whole page (i.e. spanning across the
middle three 'conceptual' pages, which is the second page when
printed on paper)
Have you tried \setupbackgrounds[paper][background=...]?
I didn't know about that before. Now I tried it, but it had no effect.
mhh, works here (but maybe not in your example?)
\setupoutput[pdftex]
\setupcolors[state=start]
\defineoverlay[test][{\bgroup\color[red]\blackrule[height=\paperheight,width=\paperwidth]\egroup}]
\setupbackgrounds[paper][background=test]
\starttext
\null
\stoptext
Thanks anyway,
Mojca
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] TABLEproblem
Aditya Mahajan schrieb:
Looks like tables want the first row to contain a \SR. I get the same
error with the more simple
\starttext
\starttables[|l|l|]
\NC A \NC B \NC\AR
\stoptables
\stoptext
Replace \AR by \SR and everything works fine. I do not usually use
tables, so I do not know if this is a bug or a feature.
thanks Aditya, but I have still a problem.
%
\starttext
%
%
\def\Pers{134}
\starttables[|l|l|]
\NC Namen\NC \getPID{134}\NC\FR % OK works
\NC Namen\NC \getPID{134}\NC\SR % OK works
\NC Namen\NC \getPID{134}\NC\AR % OK works
%\NC Namen\NC \getPID{\Pers}\NC\AR % problem with \Pers
%
\NC Namen\NC \doGetPID{Fam}{134}\NC\AR
% \NC Vornamen\NC \getVor{\Pers}\NC\LR % problem with \Pers
\NC Vornamen\NC \getVor{134}\NC\AR % OK works but not on last line
\NC Geburt\NC \getGeburt{134}\NC\LR %
%
% problem with empty lines
%
\stoptables
%
\stoptext
Greetings
Bernd
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] beta: problems including a figure without providing explicit dimensions
Mojca Miklavec wrote: Hello, I have no idea which version I had installed before that, but after upgrading to the latest beta and using an image filename.pdf the following creates an error: \externalfigure[filename] (worked OK before), while \externalfigure[filename][width=3cm] works OK. a unfinished optimization, i'll fix it Hans - Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com | www.pragma-pod.nl - ___ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] beta: problems including a figure without providing explicit dimensions
Hans Hagen wrote: Mojca Miklavec wrote: Hello, I have no idea which version I had installed before that, but after upgrading to the latest beta and using an image filename.pdf the following creates an error: \externalfigure[filename] (worked OK before), while \externalfigure[filename][width=3cm] works OK. a unfinished optimization, i'll fix it repaired Hans - Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com | www.pragma-pod.nl - ___ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] beta (31.08.2006)
Steffen Wolfrum wrote: Am 06.09.2006 um 23:35 schrieb Hans Hagen: can you test the version i just uploaded and when it fails send me a test file? Hans Does this beta also provide a fix for the index bug (see below)? no Hans - Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com | www.pragma-pod.nl - ___ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] [Fwd: Line numbering]
Aditya Mahajan wrote:
Hi CVR,
From: CV Radhakrishnan [EMAIL PROTECTED]
Reply-To: mailing list for ConTeXt users ntg-context@ntg.nl
To: Mailing list for ConTeXt users ntg-context@ntg.nl
Subject: [NTG-context] Line numbering
Date: Sat, 02 Sep 2006 10:13:31 +0530
Dear all,
Forgive me if I sound naive. I searched the archives, but could not
find the solution for my following problem:
I need to have line numbers for the text formatted in two columns. The
numbers for left column shall appear in the left side and that for right
column shall appear in the right side of the page. location=inmargin
option to the \setuplinenumbering doesn't help much. Please take a look
at the following image:
http://www.river-valley.com/cvr/one.png
which will give you an idea of my requirement. Any help in this matter
will be highly apprecaited and thanks in advance.
I do not know how to automate what you want. An ugly solution is to
specify the column breaks yourself, something like
\unprotect
\def\dosetuplinenumbering[#1]%
{\getparameters[\??rn][\c!start=1,\c!step=1,#1]%
%\global\linenumber\plusone
%Do not reset linenumber. Why is this here?
}
\protect
\starttext
\startcolumns
\setuplinenumbering[location=inleft]
\startlinenumbering
\input knuth
\stoplinenumbering
\column
\setuplinenumbering[location=inright]
\startlinenumbering[continue]
\input knuth
\stoplinenumbering
\stopcolumns
\stoptext
proof of concept:
\newcounter\TestNumber
\let\normaldodoplacelinenumber\dodoplacelinenumber
\def\dodoplacelinenumber
{\doglobal\increment\TestNumber
\xypos{lnm:\TestNumber}%
\ifdim\MPx{lnm:\TestNumber}.5\makeupwidth
\swapmacros\inleftmargin\inrightmargin
\fi
\normaldodoplacelinenumber}
\setuplinenumbering[location=inleft]
\startcolumns
\startlinenumbering
\input tufte \endgraf
\input tufte \endgraf
\input tufte \endgraf
\stoplinenumbering
\stopcolumns
\stoptext
in order to let this work ok (spacing) we need to write a nice patch (and also
use the opportunity to clean up some code) which will take a couple of hours,
so not today ..
Hans
-
Hans Hagen | PRAGMA ADE
Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com
| www.pragma-pod.nl
-
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] listoffloats question
richard rascher-friesenhausen wrote: Hans Hagen schrieb: richard rascher-friesenhausen wrote: Willi Egger schrieb: Hi, with Context 2006.08.08 there is no problem with the figure-numbering. In order to get your figure lists typeset: \conpletelistoffigures \completelistofafigures \completelistofbfigures Kind regards Willi Hello, that's right, there is no problem in getting *three* lists. But i want only *one* list, showing figures, afigures and bfigures in correct order. I think, there must be a simple solution, but i don not find it (There are three kinds of figures, because each of them has its own setups.) \placelist[figures,afigures,bfigures] \placelist[figure,afigure,bfigure] Now i get the following error message: ! Missing \endcsname inserted. to be read again \@@lifigurescriterium \d - Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com | www.pragma-pod.nl - ___ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] \setuppapersize[XY] not working properly with landscape orientation
On 9/7/06, Peter Rolf wrote:
Mojca Miklavec wrote:
Have you tried \setupbackgrounds[paper][background=...]?
I didn't know about that before. Now I tried it, but it had no effect.
mhh, works here (but maybe not in your example?)
\setupoutput[pdftex]
\setupcolors[state=start]
\defineoverlay[test][{\bgroup\color[red]\blackrule[height=\paperheight,width=\paperwidth]\egroup}]
\setupbackgrounds[paper][background=test]
\starttext
\null
\stoptext
Your example works, but the following doesn't:
\setupcolors[state=start]
\defineoverlay[test][{\bgroup\color[red]\blackrule[height=\paperheight,width=\paperwidth]\egroup}]
\setupbackgrounds[paper][background=test]
% or: \setupbackgrounds[paper][background=color,backgroundcolor=red]
\setuppapersize
[XY][A4,landscape]
\setuppaper
[nx=3,ny=1]
\setuparranging
[XY]
\starttext
\null
\stoptext
Mojca
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] beta: problems including a figure without providing explicit dimensions
On 9/7/06, Hans Hagen wrote:
Hans Hagen wrote:
Mojca Miklavec wrote:
Hello,
I have no idea which version I had installed before that, but after
upgrading to the latest beta and using an image filename.pdf the
following creates an error:
\externalfigure[filename]
(worked OK before), while
\externalfigure[filename][width=3cm]
works OK.
a unfinished optimization, i'll fix it
repaired
Thank you, now it works again!
But since you seem to be in good mood for testing at the moment: can
you please take a look at the following disappearing-image-problem:
\setupcolumns
[n=3,balance=no]
\setuplayout
[grid=yes,columns=3]
\showgrid
\starttext
\startcolumns
\section{Something}
\dorecurse{3}{\input tufte $$a^2+b^2=c^2$$}
\placefigure[force]{title}{\scale[width=\textwidth]{abcd}}
\stopcolumns
\stoptext
\scale[width=.8\textwidth] work OK, but without that the figure simply
disappears.
Thanks a lot,
Mojca
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
[NTG-context] placepublications not obeying grid placement
Hello Taco,
The following example is taken from the manual, just a grid is added
around it. I don't use grid typesetting very often, but I just noticed
that \placepublications confuses proper placement of citatons on the
grid. Is this difficult to fix? (I temporary created an ugly patch to
fix it, so there's no hurry.)
Thanks,
Mojca
\setuplayout
[grid=yes]
\usemodule[bib]
\startpublication[k=me,t=article,a=Hoekwater,y=1999,s=TH99,n=1]
\artauthor[]{Taco}[T.]{}{Hoekwater}
\arttitle{\CONTEXT\ Publication Module, The user documententation}
\journal{MAPS}
\pubyear{To appear}
\note{In case you didn't know: it's the article you are reading now}
\pages{66--76}
\stoppublication
\showgrid
\starttext
\section{Something}
\cite[author][me]
\placepublications
\stoptext
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] \setuppapersize[XY] not working properly with landscape orientation
Hi, Indeed there is a calculation problem. Even if you define your papersize as a landscape paper with \definepapersize[Mylandscape][height=210mm, width=297mm] the calculation is incorrect. Apparently the problem is not related to the option landscape or rotated. Willi Mojca Miklavec wrote: Hello, \setuppapersize[XY] is not working properly when paper orientation is landscape. The following code results in pages of dimensions 29.5 x 29.5 cm: \setuppapersize [XY][A4,landscape] \setuppaper [nx=3,ny=1] \setuparranging [XY] \showframe \starttext second page \page last page \page first page \page content in \page the middle \page three pages \stoptext I also have an additional question: I can use \setupbackgrounds [page] [background=...] for single pages which works perfectly. But how can I place a background figure on the whole page (i.e. spanning across the middle three 'conceptual' pages, which is the second page when printed on paper) Thank you, Mojca ___ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context ___ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context
[NTG-context] figurenumbering
Hallo!
Is this correct behaviour?
-
\starttext
\placefigure{}{\framed{Blub}}
\placefigure{}{\framed{Bautz}}
\placefigure{}{\framed{Bla}}
This were \rawnumber[figure] figures by now!
\setnumber[figure]{8}
We want to count on with \rawnumber[figure].
\placefigure{}{\framed{Plong}}
figurenumber is correct incremented to \rawnumber[figure],
but caption shows 4.
\stoptext
-
If this is not a bug,
how can captionnumbering be influenzed?
Wolfgang
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
[NTG-context] Intermediate files in subdirectory
Hello, Is there any way to specify where the intermediate files and log files generated by context end up? Ideally, I would like my working directory to contain tex and pdf files only. All other files could be stored in a subdirectory. That way all these extra files are kept out of sight but close at hand in case you need them. Thanks in advance, Fredrik Teknisk projektledare Ph.D. Complex Systems AcobiaFLUX AB [EMAIL PROTECTED] Tel: +46 (0) 31 722 48 11 Fax: +46 (0) 31 722 48 01 Mob: +46 (0) 733 27 92 41 www.acobiaflux.se ___ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] Intermediate files in subdirectory
On 9/8/06, Fredrik Sjunnesson wrote: Hello, Is there any way to specify where the intermediate files and log files generated by context end up? Ideally, I would like my working directory to contain tex and pdf files only. All other files could be stored in a subdirectory. That way all these extra files are kept out of sight but close at hand in case you need them. I wish I was wrong, but as far as I know you can't do it (yet?), although there have been many requests for it. To remove unneeded files you can use ctxtools --purge [--all] (texutill --purge[all] if you don't have the ruby variant installed yet) although I know that that's not quite the same. (I know some people in LaTeX world who use make files to copy/remove files.) Mojca ___ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] 2DOWN imposition gives blank pages
On 8/29/06, Sanjoy Mahajan wrote:
texexec --pdfarrange --paper=a5a4 --2up yourfile.pdf
I tried a few experiments with no luck. Not sure if it's a context or
texexec problem, or my confusion. I made the multi-page p5.pdf from
try --paperformat instead of --paper.
texexec --pdfcombine --combination=2*1
--paperformat=A4,landscape*A4,lanscape --nobanner filename.pdf
seems to do almost what you want (although it's way to complicated if
you ask me), but I still don't understand how
\definepapersize[offset=#{paperoffset}]
works.
Mojca
\setuppapersize[A4][A4]
\starttext
\dorecurse{50}{
\input tufte
}
\stoptext
Then I ran 'texexec --pdfarrange --paper=a5a4 p5.pdf' (the --2up
doesn't change the error below) and got this error:
! Missing number, treated as zero.
to be read again
a
\@@ppoffset -a
5a4
\calculatepaperoffsets ...lue {\??pp #1\c!offset }
\divide \scratchdimen
\arr...
argument ...!height }\calculatepaperoffsets {A4}
\xdef \papersize {A4}
\firstofoneargument #1-#1
\next1 #1,-\docommando {#1}
\doprocesscommaitem
...
l.3 \setuplayout
texexec is doing the arranging by making the following 'texexec.tex'
file and then, I think, running texexec on it:
\definepapersize
[offset=a5a4]
\setuplayout
[backspace=0cm,
topspace=0cm,
width=middle,
height=middle,
location=middle,
header=0pt,
footer=0pt]
\setuppagenumbering
[alternative=doublesided]
\starttext
\insertpages
[p5.pdf]
[width=0cm]
\stoptext
The 'offset=a5a4' is upsetting Context; according to texshow-web on
the garden, the offset should be a dimension. Also, I couldn't find
(using grep) the string 'a5a4' in the context sources.
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
