[pfSense Support] pfsense 2.0 BETA5 Can't get PPPoE working!
These days, I want to give verson 2.0 a try, but it doesn't really work for me. Till now, we used pfsense 1.2.3 and our PPPoE configuration worked without any trouble. But if I setup pfsense 2.0 Beta 5 with exact the same settings, I'm always not able to reach internet. The interface page in pfsense always show down mark for both, Status and PPPoE. Also if I click the Connect button, short time later, it shows up and after reload the page, it change back to down. I'm sure, I use correct configuration for our ISP. Any hint? Thanks Maik attachment: maik.vcf- To unsubscribe, e-mail: support-unsubscr...@pfsense.com For additional commands, e-mail: support-h...@pfsense.com Commercial support available - https://portal.pfsense.org
Re: [pfSense Support] pfsense 2.0 BETA5 Can't get PPPoE working!
On Wed, Jan 12, 2011 at 3:18 AM, Maik Heinelt m...@vegasystems.com wrote: These days, I want to give verson 2.0 a try, but it doesn't really work for me. Till now, we used pfsense 1.2.3 and our PPPoE configuration worked without any trouble. But if I setup pfsense 2.0 Beta 5 with exact the same settings, I'm always not able to reach internet. The interface page in pfsense always show down mark for both, Status and PPPoE. Also if I click the Connect button, short time later, it shows up and after reload the page, it change back to down. I'm sure, I use correct configuration for our ISP. Any hint? What do your mpd logs show? - To unsubscribe, e-mail: support-unsubscr...@pfsense.com For additional commands, e-mail: support-h...@pfsense.com Commercial support available - https://portal.pfsense.org
Re: [pfSense Support] pfsense 2.0 BETA5 Can't get PPPoE working!
On 2011/01/12 17:22, Chris Buechler wrote: On Wed, Jan 12, 2011 at 3:18 AM, Maik Heineltm...@vegasystems.com wrote: These days, I want to give verson 2.0 a try, but it doesn't really work for me. Till now, we used pfsense 1.2.3 and our PPPoE configuration worked without any trouble. But if I setup pfsense 2.0 Beta 5 with exact the same settings, I'm always not able to reach internet. The interface page in pfsense always show down mark for both, Status and PPPoE. Also if I click the Connect button, short time later, it shows up and after reload the page, it change back to down. I'm sure, I use correct configuration for our ISP. Any hint? What do your mpd logs show? - To unsubscribe, e-mail: support-unsubscr...@pfsense.com For additional commands, e-mail: support-h...@pfsense.com Commercial support available - https://portal.pfsense.org Here are my PPP logs: Jan 1 09:13:56 ppp: [wan_link0] LCP: Down event Jan 1 09:13:56 ppp: [wan_link0] Link: reconnection attempt 50 in 3 seconds Jan 1 09:13:59 ppp: [wan_link0] Link: reconnection attempt 50 Jan 1 09:13:59 ppp: [wan_link0] PPPoE: Connecting to 'OCN' Jan 1 09:14:08 ppp: [wan_link0] PPPoE connection timeout after 9 seconds Jan 1 09:14:08 ppp: [wan_link0] Link: DOWN event Jan 1 09:14:08 ppp: [wan_link0] LCP: Down event Jan 1 09:14:08 ppp: [wan_link0] Link: reconnection attempt 51 in 1 seconds Jan 1 09:14:09 ppp: [wan_link0] Link: reconnection attempt 51 Jan 1 09:14:09 ppp: [wan_link0] PPPoE: Connecting to 'OCN' Jan 1 09:14:18 ppp: [wan_link0] PPPoE connection timeout after 9 seconds Jan 1 09:14:18 ppp: [wan_link0] Link: DOWN event Jan 1 09:14:18 ppp: [wan_link0] LCP: Down event Jan 1 09:14:18 ppp: [wan_link0] Link: reconnection attempt 52 in 2 seconds Jan 1 09:14:20 ppp: [wan_link0] Link: reconnection attempt 52 Jan 1 09:14:20 ppp: [wan_link0] PPPoE: Connecting to 'OCN' Jan 1 09:14:29 ppp: [wan_link0] PPPoE connection timeout after 9 seconds Jan 1 09:14:29 ppp: [wan_link0] Link: DOWN event Jan 1 09:14:29 ppp: [wan_link0] LCP: Down event Jan 1 09:14:29 ppp: [wan_link0] Link: reconnection attempt 53 in 1 seconds Jan 1 09:14:30 ppp: [wan_link0] Link: reconnection attempt 53 Cable is connected (I just plugged the cable out of the other router and plugged into the WAN Port of pfsense 2.0) WAN port is configured on VR1 and this is on our alix board the middle port. Thanks Maik attachment: maik.vcf- To unsubscribe, e-mail: support-unsubscr...@pfsense.com For additional commands, e-mail: support-h...@pfsense.com Commercial support available - https://portal.pfsense.org
[pfSense Support] Import shared key from XML
Hello, I am trying to import a Shared Key from a previous XML file, It looks like the key found in the XML file can not be directly copy / pasted in the shared key box. Do you know what I have to cut out to make It work ? The key looks similar as this one : shared_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_key Thanks for your answer. Sincerely yours. G.B. «?»¥«?»§«?»¥«?»§«?»¥«?»§«?»¥«?»§«?»¥«?»§«?»¥«?»§ Grégory Bernard www.OsNet.eu «?»¥«?»§«?»¥«?»§«?»¥«?»§«?»¥«?»§«?»¥«?»§«?»¥«?»§ PGP ID -- 0x1BA3C2FD - To unsubscribe, e-mail: support-unsubscr...@pfsense.com For additional commands, e-mail: support-h...@pfsense.com Commercial support available - https://portal.pfsense.org
[pfSense Support] Re: Import shared key from XML
In message 1906f75b-41fe-444f-95d6-a2ae2d3f6...@todoo.biz bsd b...@todoo.biz was claimed to have wrote: I am trying to import a Shared Key from a previous XML file, It looks like the key found in the XML file can not be directly copy / pasted in the shared key box. Do you know what I have to cut out to make It work ? This might be a stupid idea, but create a new key, export the XML, insert the old one and import? - To unsubscribe, e-mail: support-unsubscr...@pfsense.com For additional commands, e-mail: support-h...@pfsense.com Commercial support available - https://portal.pfsense.org
Re: [pfSense Support] pfsense 2.0 BETA5 Can't get PPPoE working!
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On 01/12/2011 12:30 AM, Maik Heinelt wrote: On 2011/01/12 17:22, Chris Buechler wrote: On Wed, Jan 12, 2011 at 3:18 AM, Maik Heineltm...@vegasystems.com wrote: These days, I want to give verson 2.0 a try, but it doesn't really work for me. Same here. No PPPOE support. Till now, we used pfsense 1.2.3 and our PPPoE configuration worked without any trouble. Same here. But if I setup pfsense 2.0 Beta 5 with exact the same settings, I'm always not able to reach internet. Yep. The interface page in pfsense always show down mark for both, Status and PPPoE. Same here. Also if I click the Connect button, short time later, it shows up and after reload the page, it change back to down. Same. - -- Charles N Wyble (char...@knownelement.com) Systems craftsman for the stars http://www.knownelement.com Mobile: 626 539 4344 Office: 310 929 8793 -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.10 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iQIcBAEBAgAGBQJNLfZTAAoJEMvvG/TyLEAt6MoQAMUaBpcEgj9CKSMOT9oBuVXE 2V1CZ76O3WwodxMZ0Q1XlJWT/1C9t3NCSOvcZftseoiB+wUOiSP3EGf3rL4UBUxp nthORfvyf+AR1Fb/QLQ79DEdJQuPqT5STlKGXYW11sw93XQqqWhHT70lozCHVBGY iBUEeVDSzA0Ce0S7sd/VY37r9U4yFAO+ChQc9NkDLLqglbah8XOVrwcLzekf5pGx MjKQ94/2XvoIzNz4nhc7SxdNpwyNS5v+/eAOa3uhr9ubnwzJFjVGUlQ4jNkTBCLY mJGKNZwZxuH6D2DU2DqNHF2KZsJFOvTsDSOBAW9BjrJ08MKKVOymSBx/mppPpNkE IBQ0AyzMtx/jVae6RPaoGg+ZCagGOEvwL8afkA8Ou8ImnuHmyX0u5d6R0qVIt8h0 +hHF/vk6D3NyyE2jM+f53BTgrpuzO561iBvcvfFTCdhxGnmUF3KIKSd5ky+nJ066 6L0DNcu2z/tDMLhAzICBVqEhAs1u4Ez6ZTP98p3IFZAMsqozMijXtUtGjd/LJ/AC vHOCfpG6SC7NWl5bmqxNUnjbu4CRFU4DkZqblRv4shvsBvizjSBesYXpJKlSBoOy UZO3t8aWPALwiLGgx0XcFr+5jfsPIXBJSHXn46TDJORyRskdCjghoqlS6zohHLEU KShiab3cKXtpsgg+bwn+ =GsBm -END PGP SIGNATURE- - To unsubscribe, e-mail: support-unsubscr...@pfsense.com For additional commands, e-mail: support-h...@pfsense.com Commercial support available - https://portal.pfsense.org
Re: [pfSense Support] pfSense Beta 5 - upgrade/reboot issue
On 1/12/2011 2:11 PM, Dimitri Rodis wrote: The last 3-4 upgrades that I’ve done using nano are not automatically rebooting after the upgrade is complete, even though it says it is on the console (and last night I left it to see if it eventually would, and it did not and I logged in this morning). The following is literally a cut and paste from the console window (other than the ip address). I just checked in a fix for that. It was happening to everyone with NanoBSD. A new image is building now that will have the fix but be aware that it may not really work correctly until after this next update. When you run the update, you're still on the 'old' code which is broken. After the post-upgrade reboot you'll be on the fixed code and then subsequent updates should be good again. Jim - To unsubscribe, e-mail: support-unsubscr...@pfsense.com For additional commands, e-mail: support-h...@pfsense.com Commercial support available - https://portal.pfsense.org
[pfSense Support] Testing 2.0 - What is the upgrade and downgrade process for Daily snapshots?
Hi Everyone, Just loaded a nanobsd image of pfSense 2.0 onto a CF card for Alix board. I have only used v1.2.3 in the past and I never used the internet to upgrade it. In fact, I am under the impression that v1.2.3 is the latest and there are no upgrades to it. I am wondering if there is a nice and easy way of upgrading 2.0 to the new daily snapshots or to downgrade a day or two back? Thanks,
RE: [pfSense Support] Testing 2.0 - What is the upgrade and downgrade process for Daily snapshots?
Hi Everyone, Just loaded a nanobsd image of pfSense 2.0 onto a CF card for Alix board. I have only used v1.2.3 in the past and I never used the internet to upgrade it. In fact, I am under the impression that v1.2.3 is the latest and there are no upgrades to it. I am wondering if there is a nice and easy way of upgrading 2.0 to the new daily snapshots or to downgrade a day or two back? Thanks, When you flash an image appropriate to the size of the CF you are using, there are two partitions that are flashed (slices). When you upgrade, it upgrades the slice you aren't using with the new version, and if that doesn't work, you can use the gui to boot off of the old slice. Very nice and easy. Dimitri
Re: [pfSense Support] Testing 2.0 - What is the upgrade and downgrade process for Daily snapshots?
On Wed, Jan 12, 2011 at 1:37 PM, Dimitri Rodis dimit...@integritasystems.com wrote: if that doesn’t work, you can use the gui to boot off of the old slice. Very nice and easy. Or if it /really/ doesn't work you can use the initial boot menu to choose the other slice at boot time. You will see something like this: 1 pfsense 2 pfsense 1 Whichever number automatically appears at the prompt is the one you were running (if you're just rebooting), or the one you just upgraded to, if you're rebooting after an upgrade. You'll want to change that value before the automatic boot if that slice is giving you problems. db - To unsubscribe, e-mail: support-unsubscr...@pfsense.com For additional commands, e-mail: support-h...@pfsense.com Commercial support available - https://portal.pfsense.org
Re: [pfSense Support] Testing 2.0 - What is the upgrade and downgrade process for Daily snapshots?
So, if I am on: 1 pfsense and do an upgrade, does the upgrade apply to 1 pfsense or 2 pfsense ? Also, rather using the Console Cable each time, can I change settings somewhere to boot from a specific partition? something like Grub equivalent of Redhat in FreeBSD? Thanks On Wed, Jan 12, 2011 at 3:43 PM, David Burgess apt@gmail.com wrote: On Wed, Jan 12, 2011 at 1:37 PM, Dimitri Rodis dimit...@integritasystems.com wrote: if that doesn’t work, you can use the gui to boot off of the old slice. Very nice and easy. Or if it /really/ doesn't work you can use the initial boot menu to choose the other slice at boot time. You will see something like this: 1 pfsense 2 pfsense 1 Whichever number automatically appears at the prompt is the one you were running (if you're just rebooting), or the one you just upgraded to, if you're rebooting after an upgrade. You'll want to change that value before the automatic boot if that slice is giving you problems. db - To unsubscribe, e-mail: support-unsubscr...@pfsense.com For additional commands, e-mail: support-h...@pfsense.com Commercial support available - https://portal.pfsense.org
Re: [pfSense Support] Testing 2.0 - What is the upgrade and downgrade process for Daily snapshots?
On Wed, Jan 12, 2011 at 1:46 PM, Bruce B bruceb...@gmail.com wrote: So, if I am on: 1 pfsense and do an upgrade, does the upgrade apply to 1 pfsense or 2 pfsense ? If you booted from 1 then upgraded, it will overwrite the 2 slice. Also, rather using the Console Cable each time, can I change settings somewhere to boot from a specific partition? something like Grub equivalent of Redhat in FreeBSD? Normally only two things will cause the default boot slice to change, a firmware upgrade or user intervention. Besides changing it on the console at boot time, you may also go to Diagnostics: nanoBSD in the webUI to change it. There is a CLI utility to change it as well, but I don't know why a person would want to mess with it. db - To unsubscribe, e-mail: support-unsubscr...@pfsense.com For additional commands, e-mail: support-h...@pfsense.com Commercial support available - https://portal.pfsense.org
Re: [pfSense Support] Testing 2.0 - What is the upgrade and downgrade process for Daily snapshots?
Thanks. All clear now. But how is the upgrade process? What is the command to upgrade? or is it Console access and then chose upgrade? -Bruce On Wed, Jan 12, 2011 at 3:53 PM, David Burgess apt@gmail.com wrote: On Wed, Jan 12, 2011 at 1:46 PM, Bruce B bruceb...@gmail.com wrote: So, if I am on: 1 pfsense and do an upgrade, does the upgrade apply to 1 pfsense or 2 pfsense ? If you booted from 1 then upgraded, it will overwrite the 2 slice. Also, rather using the Console Cable each time, can I change settings somewhere to boot from a specific partition? something like Grub equivalent of Redhat in FreeBSD? Normally only two things will cause the default boot slice to change, a firmware upgrade or user intervention. Besides changing it on the console at boot time, you may also go to Diagnostics: nanoBSD in the webUI to change it. There is a CLI utility to change it as well, but I don't know why a person would want to mess with it. db - To unsubscribe, e-mail: support-unsubscr...@pfsense.com For additional commands, e-mail: support-h...@pfsense.com Commercial support available - https://portal.pfsense.org
[pfSense Support] How to set USB Wi-fi dongle as client to connect to another Wireless router?
Hi Everyone, Good news for me that a Cisco/Linksys USB dongle WUSB54GC V3 was detected within seconds of connecting to pfSense 2.0 Alix board. However, having loaded pfSense 2.0 just today, I am not sure where to turn for some documentation. First of all, the interface allowed me to add a run0 which is pointing to Wireless dongle I believe, and then there is a Wireless tab in Interfaces tab which is confusing and I was able to add run0 there again. I have done that but now I am stuck as to how to do a search for the network available around me. Is there a network scan available? Or do I have to put the values for SSID and security types somewhere in the settings? I do see the Ad-hoc, Infrastructure, and Access Point mode but I am not sure what they mean in pfSense context. Thanks
Re: [pfSense Support] How to set USB Wi-fi dongle as client to connect to another Wireless router?
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 You need to make sure your card supports master mode. If it doesn't you won't be able to use it as an access point. I don't know if pfsense will let you use a card as a client or not. I don't know why you would want to. Is your pfsense box acting as a router between you and an uplink that's over wireless? On 01/12/2011 02:17 PM, Bruce B wrote: Hi Everyone, Good news for me that a Cisco/Linksys USB dongle WUSB54GC V3 was detected within seconds of connecting to pfSense 2.0 Alix board. However, having loaded pfSense 2.0 just today, I am not sure where to turn for some documentation. First of all, the interface allowed me to add a run0 which is pointing to Wireless dongle I believe, and then there is a Wireless tab in Interfaces tab which is confusing and I was able to add run0 there again. I have done that but now I am stuck as to how to do a search for the network available around me. Is there a network scan available? Or do I have to put the values for SSID and security types somewhere in the settings? I do see the Ad-hoc, Infrastructure, and Access Point mode but I am not sure what they mean in pfSense context. Thanks - -- Charles N Wyble (char...@knownelement.com) Systems craftsman for the stars http://www.knownelement.com Mobile: 626 539 4344 Office: 310 929 8793 -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.10 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iQIcBAEBAgAGBQJNLi9FAAoJEMvvG/TyLEAt4o4QAKfgXREcPm/vB/yB1H6dpyNc PepjpVVOd6mlJAVIN0GR/q7yJahwxfAFph01LTN2kzVXzZAc9ed+qcxrcldrkBYE sWe+N+pgpohZNTaJarLk5dlLzT6rmppc2x96ApoIpkRhML0MiIjM7MkGwVPq+Xn6 jbs5TcnfTsUUJ4pQECk0JAoSgK4+viHZ12GvHUeEGReX3AuOyV2N7QjHpwS+1bfl tSR5eCxGf8NHVOE++qG0/SPmFODobWx7XILRBqjyLvMKm1ylZbULuaLNaJ0KAjTN quC6DpghI4lJcuOKHR1vsCmOtjDO/o5qGGrx4mKToe425HtqAcOFZRtLveje4yuX sG/xVqfQVLQcwPudu8zErod9qWYrwqbVSh+a43aqRWLZWJHgturAIWErwtB8VtXa GgHmp6pKNWXtW6fcJy0au7UTb0W0a4bN5II0j5oJ5U7FzpfPwE02X/ESVduZijE4 HzcmkVwkq/tt/BYp762P7odGlakySS9axRzbGATiQ8eKlMXwS5OFjG1I01Niaa6H Ucl3XWjnl1bvG7urzODFCYH5JPd5D3YbdYvDrhegM9d6T12f4zRltv+iee1GVJ2U BCn2BoChQ9TS8KtyjtvrADBsIn4t2eFu63WinN0fNViHMoYSwAVLzJv+DRgSCoAq ohKJ+yXsYv0jSl/OdtQw =cXOB -END PGP SIGNATURE- - To unsubscribe, e-mail: support-unsubscr...@pfsense.com For additional commands, e-mail: support-h...@pfsense.com Commercial support available - https://portal.pfsense.org
Re: [pfSense Support] How to set USB Wi-fi dongle as client to connect to another Wireless router?
The only reason why I want this is because I am lazy :-) I don't have a feed from my basement to my work area. I have wireless all over the building. So, I want to connect the pfsense router wireless to the main wireless router. Also, it would be great to know this because I need to know the in and out of pfsense 2.0 before I can deploy it at customer site. Is Master a mode that should appear in the list? This a WiFi USB dongle. It's made to be in client mode. Why wouldn't it work with pfSense as client mode? Thanks On Wed, Jan 12, 2011 at 5:46 PM, Charles N Wyble char...@knownelement.comwrote: -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 You need to make sure your card supports master mode. If it doesn't you won't be able to use it as an access point. I don't know if pfsense will let you use a card as a client or not. I don't know why you would want to. Is your pfsense box acting as a router between you and an uplink that's over wireless? On 01/12/2011 02:17 PM, Bruce B wrote: Hi Everyone, Good news for me that a Cisco/Linksys USB dongle WUSB54GC V3 was detected within seconds of connecting to pfSense 2.0 Alix board. However, having loaded pfSense 2.0 just today, I am not sure where to turn for some documentation. First of all, the interface allowed me to add a run0 which is pointing to Wireless dongle I believe, and then there is a Wireless tab in Interfaces tab which is confusing and I was able to add run0 there again. I have done that but now I am stuck as to how to do a search for the network available around me. Is there a network scan available? Or do I have to put the values for SSID and security types somewhere in the settings? I do see the Ad-hoc, Infrastructure, and Access Point mode but I am not sure what they mean in pfSense context. Thanks - -- Charles N Wyble (char...@knownelement.com) Systems craftsman for the stars http://www.knownelement.com Mobile: 626 539 4344 Office: 310 929 8793 -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.10 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iQIcBAEBAgAGBQJNLi9FAAoJEMvvG/TyLEAt4o4QAKfgXREcPm/vB/yB1H6dpyNc PepjpVVOd6mlJAVIN0GR/q7yJahwxfAFph01LTN2kzVXzZAc9ed+qcxrcldrkBYE sWe+N+pgpohZNTaJarLk5dlLzT6rmppc2x96ApoIpkRhML0MiIjM7MkGwVPq+Xn6 jbs5TcnfTsUUJ4pQECk0JAoSgK4+viHZ12GvHUeEGReX3AuOyV2N7QjHpwS+1bfl tSR5eCxGf8NHVOE++qG0/SPmFODobWx7XILRBqjyLvMKm1ylZbULuaLNaJ0KAjTN quC6DpghI4lJcuOKHR1vsCmOtjDO/o5qGGrx4mKToe425HtqAcOFZRtLveje4yuX sG/xVqfQVLQcwPudu8zErod9qWYrwqbVSh+a43aqRWLZWJHgturAIWErwtB8VtXa GgHmp6pKNWXtW6fcJy0au7UTb0W0a4bN5II0j5oJ5U7FzpfPwE02X/ESVduZijE4 HzcmkVwkq/tt/BYp762P7odGlakySS9axRzbGATiQ8eKlMXwS5OFjG1I01Niaa6H Ucl3XWjnl1bvG7urzODFCYH5JPd5D3YbdYvDrhegM9d6T12f4zRltv+iee1GVJ2U BCn2BoChQ9TS8KtyjtvrADBsIn4t2eFu63WinN0fNViHMoYSwAVLzJv+DRgSCoAq ohKJ+yXsYv0jSl/OdtQw =cXOB -END PGP SIGNATURE- - To unsubscribe, e-mail: support-unsubscr...@pfsense.com For additional commands, e-mail: support-h...@pfsense.com Commercial support available - https://portal.pfsense.org
Re: [pfSense Support] pfsense 2.0 BETA5 Can't get PPPoE working!
On 2011/01/13 3:43, Charles N Wyble wrote: -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On 01/12/2011 12:30 AM, Maik Heinelt wrote: On 2011/01/12 17:22, Chris Buechler wrote: On Wed, Jan 12, 2011 at 3:18 AM, Maik Heineltm...@vegasystems.com wrote: These days, I want to give verson 2.0 a try, but it doesn't really work for me. Same here. No PPPOE support. Till now, we used pfsense 1.2.3 and our PPPoE configuration worked without any trouble. Same here. But if I setup pfsense 2.0 Beta 5 with exact the same settings, I'm always not able to reach internet. Yep. The interface page in pfsense always show down mark for both, Status and PPPoE. Same here. Also if I click the Connect button, short time later, it shows up and after reload the page, it change back to down. Same. - -- Charles N Wyble (char...@knownelement.com) Systems craftsman for the stars http://www.knownelement.com Mobile: 626 539 4344 Office: 310 929 8793 -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.10 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iQIcBAEBAgAGBQJNLfZTAAoJEMvvG/TyLEAt6MoQAMUaBpcEgj9CKSMOT9oBuVXE 2V1CZ76O3WwodxMZ0Q1XlJWT/1C9t3NCSOvcZftseoiB+wUOiSP3EGf3rL4UBUxp nthORfvyf+AR1Fb/QLQ79DEdJQuPqT5STlKGXYW11sw93XQqqWhHT70lozCHVBGY iBUEeVDSzA0Ce0S7sd/VY37r9U4yFAO+ChQc9NkDLLqglbah8XOVrwcLzekf5pGx MjKQ94/2XvoIzNz4nhc7SxdNpwyNS5v+/eAOa3uhr9ubnwzJFjVGUlQ4jNkTBCLY mJGKNZwZxuH6D2DU2DqNHF2KZsJFOvTsDSOBAW9BjrJ08MKKVOymSBx/mppPpNkE IBQ0AyzMtx/jVae6RPaoGg+ZCagGOEvwL8afkA8Ou8ImnuHmyX0u5d6R0qVIt8h0 +hHF/vk6D3NyyE2jM+f53BTgrpuzO561iBvcvfFTCdhxGnmUF3KIKSd5ky+nJ066 6L0DNcu2z/tDMLhAzICBVqEhAs1u4Ez6ZTP98p3IFZAMsqozMijXtUtGjd/LJ/AC vHOCfpG6SC7NWl5bmqxNUnjbu4CRFU4DkZqblRv4shvsBvizjSBesYXpJKlSBoOy UZO3t8aWPALwiLGgx0XcFr+5jfsPIXBJSHXn46TDJORyRskdCjghoqlS6zohHLEU KShiab3cKXtpsgg+bwn+ =GsBm -END PGP SIGNATURE- - To unsubscribe, e-mail: support-unsubscr...@pfsense.com For additional commands, e-mail: support-h...@pfsense.com Commercial support available - https://portal.pfsense.org Good to hear, I'm not the only one with this problem. But better would be, if someone could help to solve this problem. We would like to use pfsense 2.0 for VPN usage, but without a working PPPoE functionality, pfsense is not usable for us and any other person with PPPoE connection. Maik attachment: maik.vcf- To unsubscribe, e-mail: support-unsubscr...@pfsense.com For additional commands, e-mail: support-h...@pfsense.com Commercial support available - https://portal.pfsense.org
Re: [pfSense Support] pfsense 2.0 BETA5 Can't get PPPoE working!
On Wed, Jan 12, 2011 at 1:43 PM, Charles N Wyble char...@knownelement.com wrote: Same here. No PPPOE support. It works fine for the vast majority, there are some edge cases that don't work and we don't know why yet at this point. Send logs, it doesn't work isn't helpful. - To unsubscribe, e-mail: support-unsubscr...@pfsense.com For additional commands, e-mail: support-h...@pfsense.com Commercial support available - https://portal.pfsense.org
Re: [pfSense Support] pfsense 2.0 BETA5 Can't get PPPoE working!
On 2011/01/13 9:20, Chris Buechler wrote: On Wed, Jan 12, 2011 at 1:43 PM, Charles N Wyble char...@knownelement.com wrote: Same here. No PPPOE support. It works fine for the vast majority, there are some edge cases that don't work and we don't know why yet at this point. Send logs, it doesn't work isn't helpful. - To unsubscribe, e-mail: support-unsubscr...@pfsense.com For additional commands, e-mail: support-h...@pfsense.com Commercial support available - https://portal.pfsense.org You might didn't notice, but I already send logs in my second mail! Maik attachment: maik.vcf- To unsubscribe, e-mail: support-unsubscr...@pfsense.com For additional commands, e-mail: support-h...@pfsense.com Commercial support available - https://portal.pfsense.org
Re: [pfSense Support] pfsense 2.0 BETA5 Can't get PPPoE working!
On 2011/01/13 9:20, Chris Buechler wrote: On Wed, Jan 12, 2011 at 1:43 PM, Charles N Wyble char...@knownelement.com wrote: Same here. No PPPOE support. It works fine for the vast majority, there are some edge cases that don't work and we don't know why yet at this point. Send logs, it doesn't work isn't helpful. - To unsubscribe, e-mail: support-unsubscr...@pfsense.com For additional commands, e-mail: support-h...@pfsense.com Commercial support available - https://portal.pfsense.org Well, if I can help We have a PPPoE line for developing tests. I could setup a pfsense 2.0 Beta5 box and make you ssh login to it. Then you, or other pfsense developer can debug it. I just would like to make it working! How about that idea? Maik attachment: maik.vcf- To unsubscribe, e-mail: support-unsubscr...@pfsense.com For additional commands, e-mail: support-h...@pfsense.com Commercial support available - https://portal.pfsense.org
