CVS Update: xc (branch: trunk)
CVSROOT:/home/x-cvs Module name:xc Changes by: [EMAIL PROTECTED] 03/08/03 21:22:13 Log message: Prepare to remove the xc/programs/xkbcomp/geometry/HP directory from the CVS repository. Modified files: xc/programs/Xserver/hw/xfree86/: CHANGELOG xf86Date.h xc/programs/xkbcomp/geometry/: Imakefile xc/programs/xkbcomp/rules/: xfree86 Added files: xc/programs/xkbcomp/geometry/: hp Removed files: xc/programs/xkbcomp/geometry/HP/: Imakefile hp omnibook Revision ChangesPath 3.2793+2 -1 xc/programs/Xserver/hw/xfree86/CHANGELOG 1.43 +2 -2 xc/programs/Xserver/hw/xfree86/xf86Date.h 3.16 +10 -3 xc/programs/xkbcomp/geometry/Imakefile 3.67 +2 -2 xc/programs/xkbcomp/rules/xfree86 ___ Cvs-commit mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/cvs-commit
Re: rough code paths draft doc
Mathieu Lacage writes: hi, I eventually got over my previous AddInputHandler puzzling and kept on reading code until I finished the included rough outline of useful code paths in the XServer. I've extended the article about AddInputHandler() have you read it? I am planning to turn this into a real documentation but real life matters make it unreasonable for me to finish this before the end of august. As such, I thought some people might find it useful as-is. If you want you can use the Wiki to publish your documentation. It has a development section. Egbert. ___ Devel mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/devel
Re: Radeon 9000 If (RV250), Mac G4 (Wintunnel) problems withXFree86
I'm willing to poke around with the stuff, but I lack docs concerning the chipset. As for the obvious things, I did patch Ben's kernel driver to work with my setup, but the radeon driver in X is far more confusing without documentation. I'll see what I can find out ... I would be grateful for any tidbits of information you could send me... You can send your request to [EMAIL PROTECTED] for 9000 Register Spec. Let me know if you need any other info. Regards, Hui Cheers, Simon --- Simon Urbanek Department of computer oriented statistics and data analysis Universitätsstr. 14 86135 Augsburg Germany Tel: +49-821-598-2236 Fax: +49-821-598-2280 [EMAIL PROTECTED] http://simon.urbanek.info ___ Devel mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/devel ___ Devel mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/devel
[Fonts] yerli kaliteyi al, issizlik azalsin!
SZ KALMAMAK N SZLERE SALANMASI N TRKYE?NN KAMPANYASI?NA KATIL! -- YERL KALTEY AL! yatrmlar oalsn SZLK AZALSIN! YABANCI MALI ALMA! SZ KALMA! 1 milyon 200 bin iyeri kapand, 9 milyon meslek sahibi insanmz isiz kald! Bugn lkemizde sanayide ve i hayatnda -i bilmezlikten ya da kiisel beceriksizlikten kaynaklanmayan- seri iflaslarla iyerleri kapanyor. Ak iletmeler ise srekli klyor, ii karyor. HER 6.500 DOLARA 1 SZ! Tketim mallar ithalatna giden her 6 bin 500 dolar, Trkiye?de 1 kiiyi isiz brakyor. Son drt yldaki 60 milyar dolarlk ithalat yerine 9 milyon kiiye i salayabilirdik! SZL KEND ELLERNLE BYTME! Azalan yatrm, oalan isizliktir. Kaliteli yerlisi varken, yabancsn tercih etmek, zaten kt olan parann dar gitmesine yol amakta, yatrmlar azaltmaktadr. Bugn Trkiye?de pek ok rn, dnya standartlarnda retilmektedir. Trkiye kaliteyi yakalamtr! YERL KALTEY AL! iye cret, memura maa olsun! Okul olsun, yol olsun, hizmet olsun! sizlerimize i, bebelerimize a olsun! --- Kampanyann gerekeleri ve destekleyenlerin listesi www.YABANCI-MAL-ALMIYORUM.com ?dadr. (Bu ileti 6 milyon Trk nternet kullancsna gnderildi; kampanya, 300.000 bin yerli reticiye, sanayi ve ticaret odalarna, odalara ve birliklere, drt ii konfederasyonuna, sendikalarna, ubelerine, derneklere ve niversitelere duyuruldu.) --- ___ Fonts mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/fonts
[I18n] Online Drugs -- Next Day Shipping! Lowest Prices on ... jvejadhmwkd qo
All new online Medical Superstore! No Prescription Needed, Largest Selection Online *We ship Internationaly as well. Best prices guaranteed. Click Here -- http://www.pharmacyworldwide.biz/pharm Be removed from our medical lists: http://www.pharmacyworldwide.biz/a.html me vfqjalvkqqumymdr cnaenkshiwly wmn o x jumknwx l s f wfkbn jbmd mwp ojvs
Re: [XFree86] Chips and FixPanelSize problem
Stephen West-Fisher writes: I'm upgrading an old laptop to FreeBSD 4.8 and having a hard time configuring XFree86 4.3.0. The configuration I'm using has always worked in the past, for 3.3.7 and 4.1.0. It appears that FixPanelSize is being ignored. In the log it shows that display size is to be overridden but the mode states exceeds panel dimensions. The modifications I am makeing are directly from the README.chip, there is an example for the exact model of laptop (Zeos Meridian 850). Any ideas? Oops, yes. It's a bug. Thanks for reporting! Egbert. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Radeon 9200: can't get DVI working
Hi, XFree86 4.3.x detects the card (chip id 0x5961, see log) and even the DFP on the primary port, but a signal is only produced on the (not connected) secondary VGA port. The hardware is working (tested with windows). I'm using a newer driver version (4.3.99) with explicit support for the card (I've also tried 4.3.0 with binary driver from Schneider-Digital and got no signal at all). Has anybody this card working with DVI? Any hints? TIA, Burkhard -- COMPUTERBILD 15/03: Premium-e-mail-Dienste im Test -- 1. GMX TopMail - Platz 1 und Testsieger! 2. GMX ProMail - Platz 2 und Preis-Qualitätssieger! 3. Arcor - 4. web.de - 5. T-Online - 6. freenet.de - 7. daybyday - 8. e-Post XFree86.0.log Description: Binary data
[XFree86] Samsung Samtron 56V Monitor Display Problem
Hi We are having problem in Display System Configuration Processor - P IV processor 1.7GHz Monitor - Samsung Samtron 56V I request u to kindly send the solution as soon as possible ___ Download the hottest happening ringtones here! OR SMS: Top tone to 7333 Click here now: http://sms.rediff.com/cgi-bin/ringtone/ringhome.pl XFree86.0.log Description: Binary data
[XFree86] Xfree having problems finding out how much onboard memory
Basically Im getting a error in the /var/log file telling me due to a hardware bug? here is the error Im getting. If anything canI define it by hand or would this be futile since X probally wont know the memory addresses. Its a 16meg Millenium II card. (WW) MGA(0): Unable to probe memory amount due to hardware bug. Assuming 4096 K (--) MGA(0): VideoRAM: 4096 kByte Thanks-- ChrisXfree does boot, but I am limited to 800x600 graphics with that much memory. Any suggestions? ---Outgoing mail is certified Virus Free.Checked by AVG anti-virus system (http://www.grisoft.com).Version: 6.0.505 / Virus Database: 302 - Release Date: 7/31/03
Re: [XFree86] XFree86 to Apple 17 Studio Display -- only blank screen
I would look to see of the Appple monitor is looking for abnormal horz. and vert. sync. ? also post your /var/log file for X that will help alot to get replies. I sense the problem is somewhere in scanlines and your sync isnt set right. obviously the server is up... you use ctrl/atl/b.s. to shut it down. did you also run XF86Config? normally if you just put in your vertical and horizontal scan frequencies in there by hand (I never use the predefined ones) the monitor section will allways work. - Original Message - From: rda To: [EMAIL PROTECTED] Sent: Saturday, August 02, 2003 11:24 PM Subject: [XFree86] XFree86 to Apple 17" Studio Display -- only blank screen [First post -- raw newbie -- please tell me if anything is out of step.] I have a homebrew PC with a Radeon 7500 driving an Apple 17" Studio Display (LCD -- DVI input) I have successfully used this hardware w/ Win XP I have recently installed RH 9 w/ XFree86 4.3.0 I can boot to text mode, but all attempts to start X result in a blank screen. I have scanned multiple sites, done several Google searches, read lots of documentation and tried _many_ config variations. To prove the set-up is functional, I have borrowed a Sony LCD display, attached it to the same DVI port and successfully gotten X to work on that. A review of the log reveals no error messages -- DDC detects the Apple monitor and its settings; the ati and radeon drivers load; DRI is installed. After loading everything there is the following entry: Audit [timestamp] X: client # rejected from local host where is a four digit numberthat varies and # is single digit number -- generally 4 or 5 then just two more lines [drm] removed 1 conserved context for kernel [drm] unmapping 8192 bytes of SAREA [hex] at [hex] Note: I am logged in as root. Once the blank screen is up, I can only return to console by CTRL-ALT-Backspace. I assume it is something in the Config file, but I cannot figure out what. Simple question: Is there anyone who has seen XFree86 driving this monitor? If so, what was the video card and what were the Config settings? I am obviously open to suggestions. This is potentially a deal-breaker for my running Linux at this point as I can't afford to change monitors just to resolve this. Many thanks in advance. bob ---Outgoing mail is certified Virus Free.Checked by AVG anti-virus system (http://www.grisoft.com).Version: 6.0.505 / Virus Database: 302 - Release Date: 7/31/03
[XFree86] Re: final issues... xfree86 for the VIA Apollo CLE266
Ar an 1ú lá de mí 8, scríobh George Georgalis : How do I disable tcp/6000 connections? No-one else seems to have mentioned this, so I'll address it; pass the server the options -nolisten tcp on the command line. -- These are the prettiest looking witnesses we have had in a long time. I imagine you are all married. If not, you could be if you wanted to be. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Xfree86_3.3.6 vs. 4.3.0 to get s3-module
Title: Xfree86_3.3.6 vs. 4.3.0 to get s3-module Hello everybody, I´m a newby so forgive me if I ask stupid questions. I have debian woody with xfree86 version 4.1.0 and S3 Trio V64+ graphic card (765 Chip) on a Pentium I Board. Unfortunately, version 4.1.0 only supports savage and virge, which means I have either to upgrade to 4.3.0 or downgrade to 3.3.6 to get the s3 module. Which alternative would you prefer? However, is there any difference, since I just need the s3 module? When I run the PreInstall-script of 3.3.6, what will happen if I have a newer glibc version than this script assumes? I mean downgrading makes me a bit suspicious. Thanks in advance and regards gebhard
Re: [XFree86] Xfree86_3.3.6 vs. 4.3.0 to get s3-module
I´m a newby so forgive me if I ask stupid questions. stupid questions are hard to forgive, but questions stemming from a lack of knowlege are not a problem. I don't see any stupid questions :-) I have debian woody with xfree86 version 4.1.0 and S3 Trio V64+ graphic card (765 Chip) on a Pentium I Board. Unfortunately, version 4.1.0 only supports savage and virge, which means I have either to upgrade to 4.3.0 or downgrade to 3.3.6 to get the s3 module. Which alternative would you prefer? Using 3.3.6's XF86_S3 server is definitely the easy way to go. The server works great on 99% of hardware. You won't RENDER support, xrandr, etc but that shouldn't be a serious issue. In other words, if you want AA fonts, hot resolution changes, etc you'll need XFree86 4.3, but if you don't care or rather sensibly think it's a bit too much fuss, then I suggest you stick with 3.3.6 . 99% of apps are happy with a v3.3.6 server (for that matter, 95% are happy with an ancient X server like that found on SCO OpenServer!). However, is there any difference, since I just need the s3 module? The v3 X servers are actually separate programs, one per driver. In practice it doesn't make much difference. Usually, apt-get install xserver-s3 and if needed dpkg-reconfigure xserver-s3 will do the trick. When I run the PreInstall-script of 3.3.6, what will happen if I have a newer glibc version than this script assumes? I mean downgrading makes me a bit suspicious. The XFree86 3.3 binaries included in Debian 3.0 are built against the same glibc as the rest of the system, and it won't matter. If you're considering building your own XFree86 3.3.x then I suggest that you either use the one that comes in the distro, or upgrade to 4.3 if you want to build your own. Craig Ringer ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Re: Screensaver
This is an autoresponder. I'll never see your message. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Beginner with ati video card
Hi, I am a newbie trying to make the transition from Windows to Linux. I have installed Mandrake 9.1, and I have performed all of the available package updates. I am not completely comfortable with using command line terminal yet, so I am still stuck in GUI mode. I am trying to get everything set up so that my wife and kids can use the computer without too much hassle. They don't care to tinker with Linux and just want it to work. I like to tinker and learn, but in order to completely break away from Windows, I have to have certain functions working somewhat seamlessly (though they only work properly with Windows about 1/4 of the time). I have an ATI All in Wonder 8500DV (64 M video ram), and the setup programs have detected every function properly except the TV receiver. The Drakx TV setup doesn't detect the receiver. Has anyone had this problem and resolved? What skill level is needed to install the correct drivers, etc.? Any help would be appreciated. Thanks, Daniel Gilchrist ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] x wont start
I was shutting down the comp because a thunder storm was a'coming.(Redhat 9.0 with newest version of XFree86, I think. Up until 6 weeks ago I performed all updates per RHN.) After I clicked the log out button, and before the GUI log in screen came up, it crashed. Ctrl-alt-delete to restart and got this: lots of input/output errors concerning /var/log/wtmp. - chgrp failed to get attributes - chmod failed to get attributes Also - /etc/rc.d/rc.sysinit: line 789: /var/log dmesg: input/output error - /etc/rc.d/rc.sysinit: line 807: /var/log/ksyms.0: input/output error Starting system logger: -syslogd: /var/log/messages: I/O error -syslogd: /var/log/secure: I/O error -syslogd: /var/log/maillog: I/O error -syslogd: /var/log/cron: I/O error -syslogd: /var/log/spooler: I/O error -syslogd: /var/log/boot.log: I/O error And later on -start xfs [Failed] -execup: I/O error Then get a message: I cannot start x server... I tried to run x server config... Failed If I try at a bash prompt... $: startx Then I receive the following... - /usr/X11R6/bin/startx: line 133: xauth: command not found - /usr/X11R6/bin/startx: line 134: xauth: command not found - /usr/X11R6/bin/startx: line 133: xauth: command not found - /usr/X11R6/bin/startx: line 134: xauth: command not found Fatal server error: cannot open log file /var/log/XFree86.0.log ...giving up. - xinit: No such file or directory (errno2): unable to connect to X server - xinit: No such process (errno3): server error - /usr/X11R6/bin/startx: line 145: xauth: command not found It seems that ANY log is not accessible. I cannot access my /var/log/XFree86.0.log file. I am unable to access the /var/log directory, period. I have tried to re-instal XFree86 and no change. But, it sounds like more than just and XFree86 problem. Any idea's are needed. Thank you, I've been without my comp for a week now. Sincerely, James Wittekind ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] x wont start
What file system are you using? Have you run fsck on all your partitions? Jesse On Sun, 3 Aug 2003, jmw34 wrote: I was shutting down the comp because a thunder storm was a'coming.(Redhat 9.0 with newest version of XFree86, I think. Up until 6 weeks ago I performed all updates per RHN.) After I clicked the log out button, and before the GUI log in screen came up, it crashed. Ctrl-alt-delete to restart and got this: lots of input/output errors concerning /var/log/wtmp. - chgrp failed to get attributes - chmod failed to get attributes Also - /etc/rc.d/rc.sysinit: line 789: /var/log dmesg: input/output error - /etc/rc.d/rc.sysinit: line 807: /var/log/ksyms.0: input/output error Starting system logger: -syslogd: /var/log/messages: I/O error -syslogd: /var/log/secure: I/O error -syslogd: /var/log/maillog: I/O error -syslogd: /var/log/cron: I/O error -syslogd: /var/log/spooler: I/O error -syslogd: /var/log/boot.log: I/O error And later on -start xfs [Failed] -execup: I/O error Then get a message: I cannot start x server... I tried to run x server config... Failed If I try at a bash prompt... $: startx Then I receive the following... - /usr/X11R6/bin/startx: line 133: xauth: command not found - /usr/X11R6/bin/startx: line 134: xauth: command not found - /usr/X11R6/bin/startx: line 133: xauth: command not found - /usr/X11R6/bin/startx: line 134: xauth: command not found Fatal server error: cannot open log file /var/log/XFree86.0.log ...giving up. - xinit: No such file or directory (errno2): unable to connect to X server - xinit: No such process (errno3): server error - /usr/X11R6/bin/startx: line 145: xauth: command not found It seems that ANY log is not accessible. I cannot access my /var/log/XFree86.0.log file. I am unable to access the /var/log directory, period. I have tried to re-instal XFree86 and no change. But, it sounds like more than just and XFree86 problem. Any idea's are needed. Thank you, I've been without my comp for a week now. Sincerely, James Wittekind ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86 ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] x wont start
try looking at your partitions and make sure all of them are mounted sounds like /var isnt getting mounted - Original Message - From: jmw34 [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Sunday, August 03, 2003 3:11 PM Subject: [XFree86] x wont start I was shutting down the comp because a thunder storm was a'coming.(Redhat 9.0 with newest version of XFree86, I think. Up until 6 weeks ago I performed all updates per RHN.) After I clicked the log out button, and before the GUI log in screen came up, it crashed. Ctrl-alt-delete to restart and got this: lots of input/output errors concerning /var/log/wtmp. - chgrp failed to get attributes - chmod failed to get attributes Also - /etc/rc.d/rc.sysinit: line 789: /var/log dmesg: input/output error - /etc/rc.d/rc.sysinit: line 807: /var/log/ksyms.0: input/output error Starting system logger: -syslogd: /var/log/messages: I/O error -syslogd: /var/log/secure: I/O error -syslogd: /var/log/maillog: I/O error -syslogd: /var/log/cron: I/O error -syslogd: /var/log/spooler: I/O error -syslogd: /var/log/boot.log: I/O error And later on -start xfs [Failed] -execup: I/O error Then get a message: I cannot start x server... I tried to run x server config... Failed If I try at a bash prompt... $: startx Then I receive the following... - /usr/X11R6/bin/startx: line 133: xauth: command not found - /usr/X11R6/bin/startx: line 134: xauth: command not found - /usr/X11R6/bin/startx: line 133: xauth: command not found - /usr/X11R6/bin/startx: line 134: xauth: command not found Fatal server error: cannot open log file /var/log/XFree86.0.log ...giving up. - xinit: No such file or directory (errno2): unable to connect to X server - xinit: No such process (errno3): server error - /usr/X11R6/bin/startx: line 145: xauth: command not found It seems that ANY log is not accessible. I cannot access my /var/log/XFree86.0.log file. I am unable to access the /var/log directory, period. I have tried to re-instal XFree86 and no change. But, it sounds like more than just and XFree86 problem. Any idea's are needed. Thank you, I've been without my comp for a week now. Sincerely, James Wittekind ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86 --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.505 / Virus Database: 302 - Release Date: 7/30/03 ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] Xfree having problems finding out how much onboardmemory
There is a VideoRam option for the Section Device of the XF86Config file. Eg: VideoRam 16384 See the man page on XF86Config. MArk. On Sun, 3 Aug 2003, Sycholic wrote: Basically Im getting a error in the /var/log file telling me due to a hardware bug? here is the error Im getting. If anything can I define it by hand or would this be futile since X probally wont know the memory addresses. Its a 16meg Millenium II card. (WW) MGA(0): Unable to probe memory amount due to hardware bug. Assuming 4096 K (--) MGA(0): VideoRAM: 4096 kByte Thanks-- Chris Xfree does boot, but I am limited to 800x600 graphics with that much memory. Any suggestions? --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.505 / Virus Database: 302 - Release Date: 7/31/03 ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
RE: [XFree86] Radeon 9200: can't get DVI working
XFree86 4.3.x detects the card (chip id 0x5961, see log) and even the DFP on the primary port, but a signal is only produced on the (not connected) secondary VGA port. The hardware is working (tested with windows). I'm using a newer driver version (4.3.99) with explicit support for the card (I've also tried 4.3.0 with binary driver from Schneider-Digital and got no signal at all). Has anybody this card working with DVI? Any hints? This is something new. It's supposed to work the same as 9000 cards, but apparently it isn't. I haven't seen a 9200 with a DVI port so far. What's the brand name of your card? I'll try to get one for the test. For now you can try to comment off following two lines in RADEONRestoreFPRegisters (radeon_driver.c), see if this makes any difference. -OUTREG(RADEON_TMDS_PLL_CNTL,restore-tmds_pll_cntl); -OUTREG(RADEON_TMDS_TRANSMITTER_CNTL,restore-tmds_transmitter_cntl); Hui TIA, Burkhard ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] Radeon 9200: can't get DVI working
I am having exactly this problem with a Radeon 7500 card (OEM = PowerColor) -- as an added complication it appears to be vary with the digital monitor attached. I can get output from XFree to the DVI port when a (borrowed) Sony XDM-72 monitor is attached, but not when my Apple Studio Display 17 LCD is attached. The Apple monitor works with the same hardware in Windows and with RH9 in text mode. I am also using the CVS ati and radeon drivers downloaded today. I have spent much time trying various config files without success. Unfortunately, I am too much a newbie to find the radeon_driver.c file to make the suggested edit. Where is it? Any other suggestions? Could the MonitorLayout option be relevant here if there is only a single monitor attached and it is detected by DDC? TIA bob - Original Message - From: hy0 [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Sunday, August 03, 2003 7:05 PM Subject: RE: [XFree86] Radeon 9200: can't get DVI working XFree86 4.3.x detects the card (chip id 0x5961, see log) and even the DFP on the primary port, but a signal is only produced on the (not connected) secondary VGA port. The hardware is working (tested with windows). I'm using a newer driver version (4.3.99) with explicit support for the card (I've also tried 4.3.0 with binary driver from Schneider-Digital and got no signal at all). Has anybody this card working with DVI? Any hints? This is something new. It's supposed to work the same as 9000 cards, but apparently it isn't. I haven't seen a 9200 with a DVI port so far. What's the brand name of your card? I'll try to get one for the test. For now you can try to comment off following two lines in RADEONRestoreFPRegisters (radeon_driver.c), see if this makes any difference. -OUTREG(RADEON_TMDS_PLL_CNTL,restore-tmds_pll_cntl); -OUTREG(RADEON_TMDS_TRANSMITTER_CNTL,restore-tmds_transmitter_cntl); Hui TIA, Burkhard ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86 ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] Radeon 9200: can't get DVI working
Hey, I am new here and I don't know where to put this question. I have an older computer with an ATI Mach(264vt2) graphics card, and the system is running Windows 95. Will these drivers work with this card and operating system? Or are these drivers only for Linux systems? Thank you for any help you can give.
Re: [XFree86] XFree86 to Apple 17 Studio Display -- only blank screen
THe horiz sync and vert refresh rates are being detected by DDC and I have put them explicitly in the config -- with no effect. In response to another suggestion, I also downloaded the CVS drivers dated last thursday-- again without effect. There is an interesting post this weekend by someone who has a Radeon 9200 card with dual ports that is getting no DVI output in XFree86 -- I have responded to that post -- I wonder if the two problems are related.Unfortunately I can't find the file required to implement the suggested fix. I feel I am too much a newbie to be this close to the cutting edge grin. bob - Original Message - From: Sycholic To: [EMAIL PROTECTED] Sent: Sunday, August 03, 2003 9:53 AM Subject: Re: [XFree86] XFree86 to Apple 17" Studio Display -- only blank screen I would look to see of the Appple monitor is looking for abnormal horz. and vert. sync. ? also post your /var/log file for X that will help alot to get replies. I sense the problem is somewhere in scanlines and your sync isnt set right. obviously the server is up... you use ctrl/atl/b.s. to shut it down. did you also run XF86Config? normally if you just put in your vertical and horizontal scan frequencies in there by hand (I never use the predefined ones) the monitor section will allways work. - Original Message - From: rda To: [EMAIL PROTECTED] Sent: Saturday, August 02, 2003 11:24 PM Subject: [XFree86] XFree86 to Apple 17" Studio Display -- only blank screen [First post -- raw newbie -- please tell me if anything is out of step.] I have a homebrew PC with a Radeon 7500 driving an Apple 17" Studio Display (LCD -- DVI input) I have successfully used this hardware w/ Win XP I have recently installed RH 9 w/ XFree86 4.3.0 I can boot to text mode, but all attempts to start X result in a blank screen. I have scanned multiple sites, done several Google searches, read lots of documentation and tried _many_ config variations. To prove the set-up is functional, I have borrowed a Sony LCD display, attached it to the same DVI port and successfully gotten X to work on that. A review of the log reveals no error messages -- DDC detects the Apple monitor and its settings; the ati and radeon drivers load; DRI is installed. After loading everything there is the following entry: Audit [timestamp] X: client # rejected from local host where is a four digit numberthat varies and # is single digit number -- generally 4 or 5 then just two more lines [drm] removed 1 conserved context for kernel [drm] unmapping 8192 bytes of SAREA [hex] at [hex] Note: I am logged in as root. Once the blank screen is up, I can only return to console by CTRL-ALT-Backspace. I assume it is something in the Config file, but I cannot figure out what. Simple question: Is there anyone who has seen XFree86 driving this monitor? If so, what was the video card and what were the Config settings? I am obviously open to suggestions. This is potentially a deal-breaker for my running Linux at this point as I can't afford to change monitors just to resolve this. Many thanks in advance. bob ---Outgoing mail is certified Virus Free.Checked by AVG anti-virus system (http://www.grisoft.com).Version: 6.0.505 / Virus Database: 302 - Release Date: 7/31/03
Re: [XFree86] XFree86 to Apple 17 Studio Display -- only blank screen
THe horiz sync and vert refresh rates are being detected by DDC and I have put them explicitly in the config -- with no effect. In response to another suggestion, I also downloaded the CVS drivers dated last thursday-- again without effect. There is an interesting post this weekend by someone who has a Radeon 9200 card with dual ports that is getting no DVI output in XFree86 -- I have responded to that post -- I wonder if the two problems are related.Unfortunately I can't find the file required to implement the suggested fix. I feel I am too much a newbie to be this close to the cutting edge grin. bob - Original Message - From: Sycholic To: [EMAIL PROTECTED] Sent: Sunday, August 03, 2003 9:53 AM Subject: Re: [XFree86] XFree86 to Apple 17" Studio Display -- only blank screen I would look to see of the Appple monitor is looking for abnormal horz. and vert. sync. ? also post your /var/log file for X that will help alot to get replies. I sense the problem is somewhere in scanlines and your sync isnt set right. obviously the server is up... you use ctrl/atl/b.s. to shut it down. did you also run XF86Config? normally if you just put in your vertical and horizontal scan frequencies in there by hand (I never use the predefined ones) the monitor section will allways work. - Original Message - From: rda To: [EMAIL PROTECTED] Sent: Saturday, August 02, 2003 11:24 PM Subject: [XFree86] XFree86 to Apple 17" Studio Display -- only blank screen [First post -- raw newbie -- please tell me if anything is out of step.] I have a homebrew PC with a Radeon 7500 driving an Apple 17" Studio Display (LCD -- DVI input) I have successfully used this hardware w/ Win XP I have recently installed RH 9 w/ XFree86 4.3.0 I can boot to text mode, but all attempts to start X result in a blank screen. I have scanned multiple sites, done several Google searches, read lots of documentation and tried _many_ config variations. To prove the set-up is functional, I have borrowed a Sony LCD display, attached it to the same DVI port and successfully gotten X to work on that. A review of the log reveals no error messages -- DDC detects the Apple monitor and its settings; the ati and radeon drivers load; DRI is installed. After loading everything there is the following entry: Audit [timestamp] X: client # rejected from local host where is a four digit numberthat varies and # is single digit number -- generally 4 or 5 then just two more lines [drm] removed 1 conserved context for kernel [drm] unmapping 8192 bytes of SAREA [hex] at [hex] Note: I am logged in as root. Once the blank screen is up, I can only return to console by CTRL-ALT-Backspace. I assume it is something in the Config file, but I cannot figure out what. Simple question: Is there anyone who has seen XFree86 driving this monitor? If so, what was the video card and what were the Config settings? I am obviously open to suggestions. This is potentially a deal-breaker for my running Linux at this point as I can't afford to change monitors just to resolve this. Many thanks in advance. bob ---Outgoing mail is certified Virus Free.Checked by AVG anti-virus system (http://www.grisoft.com).Version: 6.0.505 / Virus Database: 302 - Release Date: 7/31/03
[XFree86] Old ATI mach(264vt2) video card
Are these drivers compatible with my card and Windows 95? Or is this just for Linux users? If it is only for Linux, does anyone know where I can get drivers updated beyond ATI's abysmal support for their graphic cards?
Re: [XFree86] ati mach264vt2
I'm new here too. I believe (according to old docs) I'm running the exact same vid card attached to my old HP Pavillion (trying to test linux). Running Mandrake 9.1 and XFree 4.3, I've had no luck getting the x server to start (ERROR: Screens found but no usable config to use...). So my first instinct is to say no, this card will not work under XFree86. I'm gonna buy a cheapo trident and try again. This h/w incompatibility is the only thing that will keep linux from being accepted by the masses. This card works under Windows. -Kevin [EMAIL PROTECTED] wrote: Hey, I am new here and I don't know where to put this question. I have an older computer with an ATI Mach(264vt2) graphics card, and the system is running Windows 95. Will these drivers work with this card and operating system? Or are these drivers only for Linux systems? Thank you for any help you can give. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] X server crash
When starting up my X server for the first time after installing RedHat 9.0, I get the following error messages, as per the attached XFree86.0.log file. Claudiu Spataru XFree86.0.log Description: Binary data
Re: [XFree86] X server crash
On Sunday 03 August 2003 09:43 pm, Claudiu Spataru wrote: When starting up my X server for the first time after installing RedHat 9.0, I get the following error messages, as per the attached XFree86.0.log file. Claudiu Spataru Off hand I would say XFS is not running. Open a terminal and type; ps | grep xfs If it is running you should get something similar to this; xfs 1019 0.0 1.2 7840 6320 ?S21:10 0:00 xfs -port -1 -daemon -droppriv -user xfs If it is not running, the do a su in a terminal and (I think RH puts it in the same place as Mandrake) type this; /etc/init.d/xfs start then type; startx -- Registered Linux user 193414 http://counter.li.org Trying? My contribution was much closer to a feeble wave in the general direction of something that might lead you one step closer to a solution if you squint really hard and do all of the work. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] ati mach264vt2
You'll need to send your /var/log/XFree86.0.log file so that we can try to figure out what's wrong. Jesse On Sun, 3 Aug 2003, Kevin wrote: I'm new here too. I believe (according to old docs) I'm running the exact same vid card attached to my old HP Pavillion (trying to test linux). Running Mandrake 9.1 and XFree 4.3, I've had no luck getting the x server to start (ERROR: Screens found but no usable config to use...). So my first instinct is to say no, this card will not work under XFree86. I'm gonna buy a cheapo trident and try again. This h/w incompatibility is the only thing that will keep linux from being accepted by the masses. This card works under Windows. -Kevin [EMAIL PROTECTED] wrote: Hey, I am new here and I don't know where to put this question. I have an older computer with an ATI Mach(264vt2) graphics card, and the system is running Windows 95. Will these drivers work with this card and operating system? Or are these drivers only for Linux systems? Thank you for any help you can give. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86 ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Xfree86 Problems
Dear Sirs: I keep getting about 50 to 60 e-mails a day from people who have problems with setting up XFree on their machines. I signed up for your newsletter, some how these e-mails are being directed to me. If this continues I will have to block your site on my e-mail. Thank you Frederick Andrew [EMAIL PROTECTED] com __ Do you Yahoo!? Yahoo! SiteBuilder - Free, easy-to-use web site design software http://sitebuilder.yahoo.com ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] Xfree86 Problems
Andrew, I think everyone gets a copy of these Emails. I just signed up too. I think it shotguns the emails to everyone signed up as sort of a network effect to see if anyone has figured out the problems. I guess this way members help each other. It sounds really cool, and should make for fantastic progress in all directions. However, it is a whole hell of a lot of emails.
Re: [XFree86] Xfree86 Problems
I keep getting about 50 to 60 e-mails a day from people who have problems with setting up XFree on their machines. I presume you joined the [EMAIL PROTECTED] mailing list? I signed up for your newsletter, some how these e-mails are being directed to me. It's a mailing list. Whenever anybody sends a message to [EMAIL PROTECTED], the mailing list address, then everybody on the list gets it. It's an internet discussion and communication tool, an excellent one - but it can lead to quite a bit of email! I use automatic filters to sort messages from the (many) mailing lists I'm on into specific mailboxes, so I never even see them in my inbox. I can then go over each list at my leasure. Most mail clients can do this, or if you're using an IMAP server (like me) you can have the server do it before you even download your mail. I'm not aware of any XFree86 newsletter, and there doesn't seem to be an announce list (usually the closest thing to a newsletter that most open source projects have) for xfree86. What is the best way to stay up to date with developments in XFree86 w/o reading the lists? Anybody? It strikes me that a note on the the [EMAIL PROTECTED] list page saying that traffic is moderate for a mailing list - you can expect up to 50 messages a day - might be an idea. If this continues I will have to block your site on my e-mail. There's no need for that. If you want to unsubscribe, simply read the instructions on http://www.xfree86.org/lists.html . In particular, this is the page you'll want to use to unsubscribe: http://www.xfree86.org/mailman/listinfo/xfree86/ ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
