It probably is a heat problem - it definately lasts longer with the
DOS card removed. I've got a small fan that I might mount in there to
increase the airflow a bit. (or I could watercool it of course ;). Now
that would be a sight to see)
You might also be able to try replacing the fan
In a message Geoffrey Loeffler [EMAIL PROTECTED]writes:
Glen
The printer needs to support Ethernet or you will need a
LocalTalk to Ethernet bridge. I used an AsanteTalk bridge when I had
LaserWriter NTX and a LaserWriter 360 connected.
So I will need a AsanteeTalk Bridge, LocalTalk to
In a message Geoffrey Loeffler [EMAIL PROTECTED] writes:
So glen,
If I run my trusty 6100 G3 off an airport extreme base station, which has a
out going ethernet jack, or for that matter a hub where one connection goes to
the Base Station and the other to the 6100, will all the items that are
In a message NODEraser [EMAIL PROTECTED] writes:
I have a PowerMac 6100/66 with a G3-266 daughtercard. I have recently had
to reformat and reinstall Mac OS 9.1. Since the reinstall, I have been unable
to use AppleTalk for networking or printing purposes. Any ideas as to what has
caused this?
In a message james grant tyner [EMAIL PROTECTED] writes:
I have a 6100/60 with a non-functioning AppleCD 300Plus . Hoping that
someone on the list can advise whether this can be replaced with a Sony CD-R/RW
unit (M# CRX17OE)that was OE in my G4 before I installed DVD-R/RW in same. Any
help
If I upgrade the OS as suggested to 7.5.3, will this blow away the (many)
installed applications?
No, but I always back up before a major OS install -- just in case something
goes awry.
If you like, I can send to you a CD-ROM 7.5.3 with the 7.5.5 update. I
believe this is legal. If not legal,
In a message dated 10/19/04 [EMAIL PROTECTED]:
Looking for information on system performance while using a 7100 with an G3
upgrade card. How well does an upgraded 7100 run OS X, and OS 9. Are there
any software issues with using these cards?
First, OS X is out. You need at least a PCI Mac
