This is surely impossible. It's under the control of the OS, not the
program,
and any OS which didn't free memory when programs quit would crash very
quickly indeed.
Maybe whatever tool you are using isn't reporting the free memory
accurately
(or at least, not reporting a useful statistic).
meminfo (and top, etc.) on Linux will always look like that. The OS does
not report allocated memory as free once it has been allocated.
Rather, it will be listed as used but in actuality is available to
other process to use. It's something like a lazy garbage collection --
it only cleans up
Hi,
I have a question about analog .
I have used analog 5.32 fwanalog 0.6.4 for Nokia IP350(IPSO3.5.1)
including Checkpoint FireWall-One .
Can I get 'the html report file' for the firewall-one from the analog ?
If you have tried the analog for firewall log in the IP350 on SUN Solaris 8 or 9 ,
Hi,
is it possible to exclude clicks by myself on my own URL from the
general and the time reports? Also I want to exclude the request which
result in uploading an new version of my HP and the downloading of the
logfiles by ftp. Thank you.
Rüdiger
--
http://www.conelek.com/
Rüediger,
Take a look at the HOSTEXCLUDE command, as long as you are using a
static IP address you should be able to just exclude that address from
any log files analysed.
Regards,
John Harman
- Original Message -
From: Ruediger Kluge [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent:
I sent the following immediately on joining this list and having received no resopnse
I
wondered if it was not actually published. If it was, my apologies for the repeat
posting
but I would appreciate any comments and help. Thank you.
I've been using Analog for several years, compiling stats
Both 1 and 2 can be arranged by your script, surely? I wrote a similar script myself
recently (albeit in Access) for my organisation.
*** REPLY SEPARATOR ***
On 23/06/2004 at 15:04 [EMAIL PROTECTED] wrote:
I sent the following immediately on joining this list and having
John Harman schrieb:
Rüediger,
Take a look at the HOSTEXCLUDE command, as long as you are using a
static IP address you should be able to just exclude that address from
any log files analysed.
Regards,
John Harman
Hi John,
my HP is hosted at a service provider. So I get a new IP number when I
Dave Stiles [EMAIL PROTECTED] wrote:
I sent the following immediately on joining this list and having
received no resopnse I wondered if it was not actually published. If
it was, my apologies for the repeat posting but I would appreciate
any comments and help. Thank you.
Your message was
Hi,
I have analog 5.32 running on Fedora 1 together with ReportMagic 2.21
and DNSTrans 1.52
DNSTrans works fine and created a dnsfile which has thousands of
entries, looks good. Bud analog still uses the IPs instead of
hostnames. I have DNS READ and DNSFILE /var/log/internetlogs/dnsfile
in the
worcester wrote:
I was looking at the file here,
http://wadsack-allen.com/products/robot-list.html
and noticed the msnbot wasn't listed. Am I missing
something, or is the file?
Thanks.
I wonder if the issue is bigger than MSNBot. The list that you mentioned
Is DNSTrans outputting to /var/log/internetlogs/dnsfile ?
-- Duke
Kevin Kempfer wrote:
Hi,
I have analog 5.32 running on Fedora 1 together with ReportMagic 2.21
and DNSTrans 1.52
DNSTrans works fine and created a dnsfile which has thousands of
entries, looks good. Bud analog still uses the IPs
Is DNSTrans outputting to /var/log/internetlogs/dnsfile ?
Yes, it does. File looks correct, lots of entries.
Kevin
--
http://www.bier-voting.de
Tel.: (07071) 889678
ICQ: 2186573
Best of Harald Schmidt:
Immerhin hat Michael Jacksons Ehe drei Jahre lang gehalten - das hat
seine Nase nicht
I am wondering if there is going to be support for the
new Firefox browser in Analog.
If it could be put into older versions, all the
better.
Otherwise, I'd like to see an interim update to
include this one.
Also, are there any imminent updates due out? I'd hate
like heck to try to get the
Duke Hillard wrote:
worcester wrote:
I was looking at the file here,
http://wadsack-allen.com/products/robot-list.html
and noticed the msnbot wasn't listed. Am I missing
something, or is the file?
I wonder if the issue is bigger than MSNBot. The list that you mentioned
Thanks for your response.
The major sticking point is the lack of wildcards for the log filenames. These need to
be specified by the user at compile time. The alternative is to parse ALL logfiles
until
Analog finds the start date (which is what I'm having to do now - and some of those
log
Thanks for the reply - sorry for posting twice but I'd had no response and I did post
straight after signing up - things happen.
The script only works if you know the directory in advance. The way mine is set up it
only needs to know the name of the analog script that contains the base path -
Is anybody using Analog with the Symantec Gateway Security Series 5400 logs?
I am currently stumbling on the custom format.
Sincerely
Jan Haberkorn
+
| TO UNSUBSCRIBE from this list:
|
--- Ken Schweigert [EMAIL PROTECTED] wrote:
On Fri, May 21, 2004 at 03:55:57PM +0200, Robert
Brenstein wrote:
Not a virus, just microsoft releasing a beta
version of their spider on
the web. We had it bring a site to a crawl.
It's hitting a java-based
app that created a new java
Ruediger Kluge [EMAIL PROTECTED] wrote:
80.132.229.184 - - [17/Jun/2004:00:02:16 +0200]
GET /CEK-Module.htm HTTP/1.1 304 - www.conelek.com
http://www.google.de/search?q=Breadboardhl=delr=ie=UTF-8start=20sa
=N
Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1) -
There are Spaces between all
I've been trying to get analog to work with my access log but I keep getting
errors. The format is (with a few sample lines):
#Fields: date time c-ip cs-uri sc-status s-ip cs(Referer) cs(User-Agent)
sc-bytes time-taken cs(Cookie)
2004-06-18 12:42:28.774 10.0.0.132 /salesportal/index.jsp 200 -
Is there a way to create a report of average processing time per url? e.g.
secs: file
---:
2.4: /scripts1/ws.exe/WService=prod1/findloanappresults.r
2.3: /scripts1/ws.exe/WService=prod1/uloanhead.r
etc.
--
Bill Gunter
Unix Administrator
ARC Systems
P: 512.358.5377
F:
No, there is no such report in Analog. The closest you can get is the
processing time report, but it does not list URLs.
--
Jeremy Wadsack
Seven Simple Machines
Bill Gunter wrote:
Is there a way to create a report of average processing time per url? e.g.
secs: file
---:
2.4:
Have you tried without any LOGFORMAT command? That's the recommended
practice when using W3C extended log file formats.
--
Jeremy Wadsack
Seven Simple Machines
Kirk Everett wrote:
I've been trying to get analog to work with my access log but I keep
getting errors. The format is (with a few
Yeah. When I do that it gets confused on the missing referrer. See the
first few errors below. The * is always under the - just before the
browser. Thanks.
F: Opening C:\kirk\devtools\analog532\logfiles\igrid\w3c_access.04-06-14.log
as logfile
F: Detect that it's in W3 extended format
C:
Here is a casino giving away $25 Free when you sign up an account.
No credit card required
http://casino.cls2.org/iwin.html
James
Hi,
I want to use Analog 5.91b on Windows XP to analyze my HP. The HP is
hosted at a service provider with an Apache Server. Unfortunately Analog
cannot read the log file.
The error message is:
Warning F: Can't auto-detect format of logfile D:\InterDat\Analog
Ruediger Kluge [EMAIL PROTECTED] wrote:
I compared the information in the original logfile and my logfile to
define an Apachelogformat. Unfortunately my knowledge is not
sufficient to succeed. Perhaps someone can help me to define the
format.
APACHELOGFORMAT is only relevant if you have
Aengus schrieb:
APACHELOGFORMAT is only relevant if you have access to the .conf file
for an Apache web server - instead of translating the logformat in
that .conf file, Analog can use it directly once you tell it that is
using Apache syntax rather than Analog syntax.
Ok, of course I don't have
Ruediger Kluge wrote:
Tomorrow I will try to understand the difference between the LOGFORMAT
that Analog expects and your LOGFORMAT. Please can you give me the
LOGFORMAT which is used by Analog?
See http://analog.cx/docs/logfmt.html. Analog does not expect a single
log format but is aware of
You can add the bytes column (B) to your monthly report using MONTHCOLS
command. See http://analog.cx/docs/timereps.html#timeCOLS for details.
Jeremy Wadsack
Seven Simple Machines
Jep, that worked. Thanks a lot, didnt just see it myself.
OK, and these requests would include requests for (italics) ALL
FILES...?
That is gifs, jpgs, as well as pages?
I am finally getting there now in understanding this clearly in terms of
how the reports are laid out too.
Very best wishes,
Paul Richards
-Original Message-
From: [EMAIL
Paul Richards-Training [EMAIL PROTECTED] wrote:
OK, and these requests would include requests for (italics) ALL
FILES...?
A request is a request for any file. A page request is a request for
a page. Analog will differentiate between these in various reports (you
can specify the Requests and/or
Has the recent release of OS 10.3.4 solved the problem of Macs not
being able to trace domains in Analog?
Thanks..
--
Jim Coyle
MacMechanix, Inc.
[EMAIL PROTECTED]
917-689-4373
+
| TO
Title: Silly beginners question!
Hi all
I have recently been trying to explain the difference to colleagues between referrer requests and page requests and have realised that I have not 100% grasped this basic thing myself, though I do have a very good idea.
But my question goes like
Page requests and referrers are different. A page request is
exactly that: a request for a page. A referrer is is the place
from which the user (or the user's computer) heard about
your page. If the user followed a link to reach a page, the
referrer is the previous page. If a page contains a
Hi Duke...
Very helpful...Thanks...I think it's the heat here in London, but I just
suddenly got very confused!
Very best wishes,
Paul Richards
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Duke Hillard
Sent: 15 June 2004 16:38
To: [EMAIL
Duke Hillard [EMAIL PROTECTED] wrote:
Page requests and referrers are different. A page request is
exactly that: a request for a page. A referrer is is the place
from which the user (or the user's computer) heard about
your page. If the user followed a link to reach a page, the
referrer is
Hello,
How do i code my Analog to show used bandwith per month?
+
| TO UNSUBSCRIBE from this list:
|http://lists.isite.net/listgate/analog-help/unsubscribe.html
|
| Digest version:
Kokko wrote:
Hello,
How do i code my Analog to show used bandwith per month?
You can add the bytes column (B) to your monthly report using MONTHCOLS command. See
http://analog.cx/docs/timereps.html#timeCOLS for details.
--
Jeremy Wadsack
Seven Simple Machines
On Fri, 11 Jun 2004, [ISO-8859-2] Szeg? Ákos wrote:
There is no secondary sort criterion, and I don't have any desire to add
one. It's much more cumbersome than it's worth.
I wasn't requesting one, either, just asking where the consistency is in
such rankings. To my limited programming
On Fri, 11 Jun 2004, Paul Richards-Training wrote:
FILEINCLUDE /searchResults.asp?delivery=ONLINECOURSE
REQINCLUDE /searchresults.asp?*delivery=*
REQINCLUDE /searchresults.asp*
I suspect we may not need both reqincludes...? But I am now scared to
touch anything, as I am so pleased to have
On Fri, 11 Jun 2004, [EMAIL PROTECTED] wrote:
Hi,
I am only making a request report which shows the
text area fine, which is ocnfigured to show all the
sub items, but some of the items (sub and main
especially those listed at the end of the text area)
show up bunched together as other in
Thanks Stephen.
Very best wishes,
Paul Richards
BBC Gateway Team - Statistics and Search
Internal ext: 89354
External phone number: 020 7208 9354
Room 301, 35 Marylebone High St, London W1U 4PX
my page on connect.gateway
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL
Satve 780% ordAering onl4ine Tovday!
ViZsit our Site and Sajve Big
toshiba refer ilyushin soggy pascal dash source mccluskey ale crockery tasty methionine sabina amputee hyphenate flex equilibrium coda transduction naive danzig tucker b calcite shoal radiotherapy vacuolate
Certain other logfile analyzers can be run in in an update mode which
adds new log information to an existing report. From reading through the
FAQs and documentation, I don't see any references to such a mode in
Analog or whether it's simply an implied, default behavior.
My current setup of
Nevermind, I just found the section on CACHEFILE.
However any advice is still welcome.
**
* Brian Cohen
**
On Mon, 14 Jun 2004, Brian J. Cohen wrote:
Certain other logfile analyzers can be run in in an update mode which
adds new log information to an
I've been using Analog for several years, compiling stats locally by hand. I'm now
trying to set up an automated service for my customers on a Windows 2000 server
using ASP under IIS5. The server has several virtual web sites, each web site having
an unique log path within the site's directory
Analog-author,%
75%off for all New Softwares.
WindowXP,Photoshop,Window2003...etcMore
http://www.19greatsoft.biz
--
crafty aaron autoclave closure rhodesia pyrolyse dichondra dualism mixup taxpaying
belgium familiar trigram prefer clot chromatic calgary appoint oilseed uniaxial
similitude
You might want to add the Date and time of last access (D) and Date
and time of first access (E) columns to your request report to see if it at
least explains what is happening, even if it doesn't allow you to control
it
Excellent idea, thanks. So I tried all columns, unfortunately, none
Hi Stephen...
Thanks very much...!
This has cracked it.
It seems to be the combination of the explicit file include and the
wildcards present in the reqinclude that have solved it.
For the record , in case this helps others in the group, these are the
relevant lines in the config file that
Hi,
I am only making a request report which shows the
text area fine, which is ocnfigured to show all the
sub items, but some of the items (sub and main
especially those listed at the end of the text area)
show up bunched together as other in the pie chart.
NOTE: NOT all items at the end. Just
On the report file, underneath some graphs it says (for example), 'Listing
the top 40 browsers'.
Is it possible to change this number so that it would list the top 60
browsers, for example?
(I have been through the documentation and FAQ's etc. but have not found an
answer.
Many Thanks,
Tom.
Dear Mr Wadsack,
Thank you for your answers.
Re: SORTBY
I do know and use the SORTBY command. My question referred to
entries that cannot be sorted by the parameter given there, because
the parameter has the same value for them (i.e. pages each requested
once, referrers each referring once
Tom W [EMAIL PROTECTED] wrote:
On the report file, underneath some graphs it says (for example),
'Listing the top 40 browsers'.
Is it possible to change this number so that it would list the top 60
browsers, for example?
(I have been through the documentation and FAQ's etc. but have not
Szeg kos [EMAIL PROTECTED] wrote:
My question referred to
entries that cannot be sorted by the parameter given there, because
the parameter has the same value for them (i.e. pages each requested
once, referrers each referring once etc.). I cannot see a consistent
logic behind ranking such
There is no secondary sort criterion, and I don't have any desire to add
one. It's much more cumbersome than it's worth.
--
Stephen Turner, Cambridge, UKhttp://homepage.ntlworld.com/adelie/stephen/
Low Priced Cambridge Clare College. Big selection at eBay UK!
(Ad after Google search for
Hi Everyone,
I'm new to the list and I'm currently engaged in learning Analog. I find the program
to be awesome in its ability to process logs and to do so quickly. But, I'm faced
with a small problem right now. I've already RTFM, but could not find my answer
(possibly I missed it). When
Paul Dowd [EMAIL PROTECTED] wrote:
When processing my logfile I cannot get analog to display the
browsers used to access my pages in the report. Instead I see [not
listed: 4 browsers] in the report and [not listed: 1 browser] in the
summary. I'm not sure what is wrong.
The line immediately
Thanks Aengus! That was the problem.
Sincerely,
Paul Dowd
Special Systems Technician
C/W MARS, Inc
1 Sunset Lane
Paxton, Massachusetts 01612-1197
Phone: (508) 755-3323 x.28
Fax: (508) 755-3721
Email: [EMAIL PROTECTED]
Web: http://www.cwmars.org
On 2004-06-10 at 17:35:00 you
Title: Problem with a query string url
Hi
Trying to run a report on a url which we cannot seem to isolate, ie. So we just get an html report on this link alone.
The url is exactly as follows (it's an intranet url):
http://learn.gateway.bbc.co.uk/searchResults.asp?delivery=ONLINECOURSE
Hi my server recives requets in the form
GET
/vafwebapp/sportsWatch.do?category=sportMainassID=2sports=Football
HTTP/1.1
By default, argumens showing in REQUEST REPORT is
supposed to be enabled. But apaprently, after reading
the entire docs and tyring various things including
ARGSINCLE (after
Are you sure the query string is present in your log files?
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of
[EMAIL PROTECTED]
Sent: Thursday, June 10, 2004 11:04 AM
To: [EMAIL PROTECTED]
Subject: [analog-help] arguments to request
Hi my server recives
On Thu, 10 Jun 2004, Paul Richards-Training wrote:
Hi...
Trying to run a report on a url which we cannot seem to isolate, ie. So
we just get an html report on this link alone.
The url is exactly as follows (it's an intranet url):
Yes.
My initial email is showing the exact request field
copy pasted from the log file. The query string is
shown as part of the request field and not seprately
in the log file.
Please tell me what arguments would you use to display
it. In the mean time I also used the analog
-settings command
Just to follow up on that response.
There are 4 different type of search strings, all of
which do show up on the request report. It is just
that that request is not sub categorized into showing
the individual strings. On tht note I also set
REQARGSFLOOR 1R
and it does not show the query still.
Just to be clear, you are talking about adding a column to each of the
time reports that counts the number of unique referrers for the
specified time period. In order to do this, Analog would need to
aggregate the referrers and count the number of lines for each time
period that each unique
Hi,
I've been using analog for more than a year. Over time I have found the
answers to most of my questions in the documentation, but not to
these:
1. How can I make lists in the reports adhere to some kind of ranking
order where several pages/queries/referrers etc. have the same
number of
See responses below.
Szeg kos wrote:
1. How can I make lists in the reports adhere to some kind of ranking
order where several pages/queries/referrers etc. have the same
number of requests? Currently items that have e.g. 1 request can
appear in completely different (and arbitrary) order when
John Stokes wrote
I don't have such a Redirection Report option listed in my
analog.cfg
What would be the entry?
Jeremy Wadsack wrote
REDIRECT ON
If redirection works on your site then you probably don't
need to add the script.
Check your log files after you have submitted a few of these
Fatal error: Ran out of memory: cannot continue:
exiting
I get this error when running analog for a monthly report.
We have 2.84 GB of gzip compressed logfiles for the month of May. Has anyone
encountered this before? Im running Analog 5.32 on Windows 2000 Server.
Jeff Ross
On Tue, 8 Jun 2004, Jeff Ross wrote:
Fatal error: Ran out of memory: cannot continue: exiting
I get this error when running analog for a monthly report. We have 2.84
GB of gzip compressed logfiles for the month of May. Has anyone
encountered this before? I'm running Analog 5.32 on Windows
Bruce,
You indicated that the example didn't work for you,
but it's not clear to me what you mean. Are you saying
that you got no output? Or that you got output outside
the date range that you expected? Did you specify the
TO on a separate line of your Analog configuration file?
Is Analog
John Stokes wrote:
Stephen Turner wrote on Jun 1,
They will show up in the Redirection Report, not the Request
Report.
Thanks, but
I don't have such a Redirection Report option listed in my analog.cfg
What would be the entry?
REDIRECT ON
Checked out these recommendations and found a number
Hi Duke,
The report ran but didn't give the expected result - ie it was for a
period spaning 2 months not just the previous month.
I may have fixed it. I had the TO near the bottom of the config file.
I then moved it to above the logfile entry and modified that entry as
follows -
TO -00-0131
The companion the TO command is the FROM command. You can use it to limit starting
time of the data Analog parses:
FROM -00-0101
TO -00-0131
However, Analog will process all the log files you specify and drop any
lines that are not in the range of dates. So this is not entirely
efficient if
I have analog 5.32
runing on windows 2003 server.
What do I need to
specify in the FROM and TO parameter to produce a report for the last calendar
month.
The example in the
help doesn't work. (TO -00-0031) is supposed to run the report up to the 31 of
the last month.
I don't want to
Jeff Ross [EMAIL PROTECTED] wrote:
I would like to get Analog to report the number of distinct users to
my website based on a Cookie that is given to the user. Is this
possible? Or has anyone customized Analog to do this?
If there is no user field in your logfile, Analog will automatically use
Using regular expressions with FILEALIAS seems likely to solve your problem.
Assuming that your document root begins at /local, something like this
might work.
FILEALIAS /local/content/index/([\d]*),([\d]*),([\d]*)-*
/local/content/index/$3
This assumes that the 0, 3222, and 143 in your
I would like to get Analog to report the number of distinct users
to my website based on a Cookie that is given to the user. Is this possible? Or
has anyone customized Analog to do this?
Jeff Ross
I see a partial IP address 172.xx in the Organization report and I want to
have it displayed as a name instead of an IP address (as I know who it is).
How do I do this? I've tried to put an entry into the DNS file but that
didn't work.
Thoughts?
On Wed, Jun 02, 2004 at 08:18:26AM -0500, Robert Lambrecht wrote:
I see a partial IP address 172.xx in the Organization report and I want to
have it displayed as a name instead of an IP address (as I know who it is).
How do I do this? I've tried to put an entry into the DNS file but that
Unfortunately, I don't have access to modify that file. The DNS file I referred to
was a cache DNS file that I create with rdnslogs. When I go into the cache DNS file,
I see an entry like 172.1.1.1 *
When I change the * to someone.that.iknow.com it doesn't seem to make any difference
in
Or you can use the logresolve command that is in the apache bin
directory. That will replace all of the ip address in your log files
with their respective host names.
Ken Schweigert wrote:
On Wed, Jun 02, 2004 at 08:18:26AM -0500, Robert Lambrecht wrote:
I see a partial IP address 172.xx in
I just took a peek at our log files and the IP address is completely
replaced. So take the 127.1.1.1 out and put someone.that.i.know.com in
it's place. You could probably write a quick script to go in and replace
certain IPs with whatever text you specified.
Robert Lambrecht wrote:
I use vignette and the urls are formatted with parameters in the URL like:
http://mysite.com/local/content/index/0,3222,143-1408-2292---Name_1,00.html
where the 143-1408-2292 are different parameters to generate different
pages. I want to report on each of these numbers. For example, the
They will show up in the Redirection Report, not the Request Report.
--
Stephen Turner, Cambridge, UKhttp://homepage.ntlworld.com/adelie/stephen/
Low Priced Cambridge Clare College. Big selection at eBay UK!
(Ad after Google search for Clare College Cambridge)
Hi folks,
I try to create analog reports for different virtual domains hosted on one
Zope Server.
As you can see below:, the domains are mapped to the following syntax:
123.456.36.132 - Anonymous [21/May/2004:10:27:59 +0200] GET
John Stokes [EMAIL PROTECTED] wrote:
Aengus wrote on 30 May
John Stokes [EMAIL PROTECTED] wrote:
On 30 May checked my analog Request Report for 29 May, but couldn't
find the requested link (what would I look for?).
You'd look in your request log for calls to redirect.cgi, or
whatever
No, I don't have a redirect.cgi script. Can you advise where to
find one or instructions how to write one?
Not really - but if you search google for redirect.cgi and redirect.pl
you'll probably find something useful.
Randal Schwartz wrote a basic one for a WebTechniques articles several
Mike Coppins wrote:
The msnbot is making a mockery of the analog 'failure report' as it
406's on any text file. Is there any way of excluding it from this
report (preferably all reports, but hey)?
I've talked to MS about their new beta bot and they are aware of these
issues. They say they are
Brady wrote:
I view part of my website from my computer directualy or from a computer in
a difreant room. how can i make all http://localhost or
http://192.168.001.001 or however i have called to the host computer show as
my websiye http://www.mysite.com
If they all resolve to the same
Jeremy Wadsack wrote:
Mike Coppins wrote:
The msnbot is making a mockery of the analog 'failure report' as it
406's on any text file. Is there any way of excluding it from this
report (preferably all reports, but hey)?
I've talked to MS about their new beta bot and they are aware of these
An updated V3.6 of RDNSLOGS for Windows can found at:
http://faculty.stcc.edu/silvestri/rdnslogs/
At this same URI, there is also the beginnings of an RDNSLOGS for
Linux!!! This code represents a very rough port of the Win32 V3.60
version of RDNSLOGS.
It seems to work on my machine, but I
Stephen Turner wrote on Jun 1,
They will show up in the Redirection Report, not the Request
Report.
Thanks, but
I don't have such a Redirection Report option listed in my analog.cfg
What would be the entry?
Aengus, and Jeremy Wadsack wrote on Jun 1
if you search google for redirect.cgi and
Aengus wrote on 30 May
John Stokes [EMAIL PROTECTED] wrote:
On 30 May checked my analog Request Report for 29 May, but couldn't
find the requested link (what would I look for?).
You'd look in your request log for calls to redirect.cgi, or whatever
redirect script you were using.
Do you
John Stokes wrote on May 27:
Is there some way of formatting, on our website, location links to
other websites so when click-accessed they show up as requests on our
access_log and in our analog Request Report?
Klaus Johannes Rusch wrote, in part, on May 28:
* Change the target URL so that the
John Stokes [EMAIL PROTECTED] wrote:
On 30 May checked my analog Request Report for 29 May, but couldn't
find the requested link (what would I look for?).
You'd look in your request log for calls to redirect.cgi, or whatever
redirect script you were using. You could also use the Internal
The msnbot is making a mockery of the analog 'failure report' as it
406's on any text file. Is there any way of excluding it from this
report (preferably all reports, but hey)?
--
Mike Coppins
[EMAIL PROTECTED]
http://www.mikeymike.org.uk/
I view part of my website from my computer directualy or from a computer in
a difreant room. how can i make all http://localhost or
http://192.168.001.001 or however i have called to the host computer show as
my websiye http://www.mysite.com
201 - 300 of 12872 matches
Mail list logo
