Wed, Nov 3, 2021 at 8:48 PM Jose Alberto wrote:
>>
>>> Personally. I have seen the highest speeds in AIX, then in Linux and
>>> finally in Windows. With Windows of 40MB I have not passed.
>>>
>>> Virtual or physical server, antivirus, vss, type of data to be
MB I have not passed.
>>
>> Virtual or physical server, antivirus, vss, type of data to be backed up,
>> are factors that influence Windows
>>
>> On Tue, Nov 2, 2021 at 5:00 PM Andras Horvai
>> wrote:
>>
>>> 1. AV exclusion did not solve the issue. Bac
e 11.x version (odd) from bacula.org is also open source. Do not
> confuse with the Bacula Enterprise Edition (even) versions.
>
> Rgds.
> --
> MSc Heitor Faria (Miami/USA)
> CEO Bacula LatAm
> mobile1: + 1 909 655-8971
> mobile2: + 55 61 98268-4220
>
> América Lat
Hello Heitor,
How much is very slow? i think on a 1 Gigabit/s connection around 100
Mbit/s is slow considering that the network test between sd and the client
gives 925.6 Mbit/s - 977.6 Mbtit/s result
(I used bacula to test it) The problem is that when it comes to real
backup it drops to around
_speed=115.7 MB/s
This shows that there is 1 Gbps connection between the storage and the
client.
Where is the bottleneck?
Thanks,
Andras
On Fri, Oct 29, 2021 at 4:53 PM Andras Horvai
wrote:
> Hi John!
>
> Thanks for answer, sorry for long delay.
> We do not use encryption an
windows file daemon?
Thanks,
Andras
On Thu, Oct 21, 2021 at 3:16 PM Josh Fisher wrote:
> On 10/16/21 17:37, Andras Horvai wrote:
>
> Dear List,
>
> Recently I faced to the following problem what I cannot solve:
>
> I would like to backup a file server. It is a physical m
Dear List,
Recently I faced to the following problem what I cannot solve:
I would like to backup a file server. It is a physical machine with Windows
2019 operating system.
This bacula sd is on the same vlan as this server (sd and dir is on the
same server).
The issue is that we have very very
Hi,
I see that debs are also uploaded for Debian Jessie and Stretch.
Can I kindly ask when will be Ubuntu bionic available?
Thanks,
Andras
On Tue, Jun 25, 2019 at 11:35 AM Davide Franco wrote:
> Hello Olivier,
>
> Bacula 9.4.4 rpm packages are now available for rhel/centos 6 & 7.
>
> More
hi,
anybody, any idea regarding this error? Why the termination status of the
previous job was: *** Copying Error *** ?
Thanks,
Andras
On Wed, May 8, 2019 at 4:11 PM Andras Horvai
wrote:
> you got the point, here it is another error message:
>
> 06-May 12:01 backup2-dir JobId 10
bytes ...
so why I got Connection reset by peer message? SD,FD,Director is on the
same machine (in the case of Copy jobs)
Thanks,
Andras
On Wed, May 8, 2019 at 3:10 PM Martin Simmons wrote:
> That look clean.
>
> Are there any messages for the "New Backup JobId" (1038)
t; (/backup).
06-May 12:54 backup2-sd JobId 1037: Forward spacing Volume "FILEW-1031" to
addr=238
06-May 12:55 backup2-sd JobId 1037: End of Volume "FILEW-1031" at
addr=2147475636 on device "FileStorage" (/backup).
06-May 12:55 backup2-sd JobId 1037: Ready to read from v
Dear List,
does anyone have any clue why I got director error after a tape change: (I
am using copy job to copy full backups (from file storage) to tape.
Tape change message:
Subject: Bacula: Intervention needed for srv1-job.2019-05-06_09.00.01_21
06-May 12:08 backup2-sd JobId 1038: Please
Dear Chandler,
thank you for your email.
Job log of JobID 244:
19-Feb 15:04 backup2-dir JobId 244: Start Restore Job
RestoreFiles.2019-02-19_15.03.58_47
19-Feb 15:04 backup2-dir JobId 244: Using Device "LTO-6" to read.
19-Feb 15:05 backup2-sd JobId 244: Ready to read from volume "RCWORMW-0004"
Hi Bacula gurus,
recently we bought a LTO-6 tape drive. This is an IBM 7226 LTO-6.
It has the latest firmware J451. Currently we are using bacula 9.4.1 on
Ubuntu 18.04 bionic.
We installed the IBM LTO-6 tape driver on linux: lin_tape. lin_taped daemon
is also running.
Bacula is using
Dear Bacula experts,
I am using the latest Bacula opensource version:
backup2-dir Version: 9.4.1 (20 December 2018) x86_64-pc-linux-gnu ubuntu
18.04
My experience is when I run a copy job (copy volumes from file storage to
tape storage) and when the tape is not mounted and labelled and bacula is
: *** Copying Error ***
Any suggestions are welcomed! Thanks for your help!
Andras
On Mon, Nov 26, 2018 at 12:25 PM Andras Horvai
wrote:
> Thanks Kern! I will dig deeper in documentation. First I try setup
> heartbeat in SD's config!
>
> On Mon, Nov 26, 2018 at 11:33 AM Ker
enough to remember
> them all. Please ask others or see the documentation ...
>
> The easiest way is to get on a current version -- e.g. 9.2.2 where it is
> done by defaut.
>
> Best regards,
> Kern
>
> On 11/26/18 11:13 AM, Andras Horvai wrote:
>
> Hello Kern,
>
> yes
h is very likely to resolve your problem.
>
> Best regards,
> Kern
>
> On 11/26/18 10:34 AM, Andras Horvai wrote:
>
> Hi Tilman,
>
> thank you for your answer! But unfortunately the firewall cannot be a
> problem here :)
> The problem happens only with Copy Jobs. The
The message
>
> > 20-Nov 12:25 backup-sd JobId 4845: Fatal error: append.c:223 Network
> error reading from FD. ERR=Connection reset by peer
>
> looks suspiciously like a firewall killing the FD - SD connection
> because it sees it as idle.
>
> HTH
> Tilman
>
&
Dear list,
I have to following problem:
We use copy jobs to copy weekly full backups to WORM tape but when a tape
gets filled and needs to change the copy job failed. Bacula says
intervention is
needed so we put a new tape in the tape drive. What can be the problem?
Copy job report:
20-Nov 12:25
s-free.
www.avast.com
<https://www.avast.com/sig-email?utm_medium=email_source=link_campaign=sig-email_content=webmail_term=link>
<#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
On Fri, Aug 4, 2017 at 10:02 PM, Dan Langille <d...@langille.org> wrote:
> > On Aug 3, 2017, at 4:44 AM, Andras H
Hi,
I had to move my bacula backup server from one server to another because of
hardware
failure. I am using mysql server as my catalog backend. Before installing
the new server
I did a mysql dump on the old and then I did a mysql restore on the new.
Seemed everything was fine. Then recently I
tools
ii bacula-server 7.0.5+dfsg-4ubuntu0.1
all network backup service - server metapackage
Any comment/help are welcomed!
Best Regards,
Andras Horvai
--
Check out the vibrant tech
Hi,
Is it possible to mount the actual tape where the backup will run with
runbeforejob?
So I have a job which needs a tape and I would mount this tape with
runbeforejob
with the job which will need the tape? (I would do this with an external
script which
will call the bconsole utility)
like
Hi,
Use the update command in bacula console. Check this:
http://www.bacula.org/rel-manual/Bacula_Console.html#_ConsoleChapter
Andras
-Original Message-
From: [EMAIL PROTECTED]
To: bacula-users@lists.sourceforge.net
Date: Friday Friday, November 24, 2006 6:50:15 PM
Subject:
-
From: [EMAIL PROTECTED]
To: bacula-users@lists.sourceforge.net
Date: Friday Friday, November 24, 2006 10:50:00 PM
Subject: [Bacula-users] Update clients FileRetention JobRetention Period?
On 11/24/06,pedro moreno[EMAIL PROTECTED] wrote:
On 11/24/06,Andras Horvai[EMAIL PROTECTED] wrote
Hi,
What is the output of the test.php (http://your_location_to_bacula_web/test.php) ?
Do you have php4-pear installed? Bacula-web works me although I'm using Debian Sarge.
Andras
-Original Message-
From: [EMAIL PROTECTED]
To: bacula-users@lists.sourceforge.net
Date: Friday
Hi,
Well thanks for your answer. I will change my volumes size useing the
Max Volume Bytes setting. What settings do you reccomend if you used
this feature? If I issue the list volumes command in console I got
this:
, Andras Horvai wrote:
Have you already tried this? My catalog is around 1 GB large.
How long will it take to reindex it?
It's hard to say, but it could easily take hours, especially if you don't
have a particularly fast machine, so just be patient with it.
--
Frank Sweetser fs at wpi.edu
, Nov 04, 2006 at 06:00:52PM +0100, Andras Horvai wrote:
Hi,
I'm using bacula Version: 1.38.11 (28 June 2006) and mysql 4.0.24 with
a debian sarge system. My problem is that I am not able to purne or
purge my volumes. It seems that it takes forever to purne/purge the database
records. Did
Hello,
I did some research in the mailing list archives but I didn't find
the solution. I'm using bacula-dir Version: 1.38.11 (28 June 2006) and
windows file daemon version: 1.38.11.
I'm getting this error messages for few files:
ERR=The system cannot find the file specified.
I checked the
Dear List,
I would like to backup files larger or equal than 4 GB.
How can i do this with bacula? I got this error message:
Could not stat c:/dvdimage.iso .
Thanks in advance,
Andras
-
Using Tomcat but need to do
Hello,
I'm using debian sarge with bacula 1.36.3
this is one my clients to backup:
abc-server-fd Version: 1.38.3 (04 January 2006) VSS Windows Server 2003 MVS NT
5.2.3790
Daemon started 17-Feb-06 12:31, 0 Jobs run since started.
No Terminated Jobs.
Running Jobs:
Director connected at:
Hi Landon,
I haven't experienced any problem yet. Could you please tell me any examples?
A.
On Jan 16, 2006, at 8:12 AM, Andras Horvai wrote:
Hi Jari,
Thanks for your answer, but the firewall was the problem.
Your next problem will be that 1.36 and 1.38 are not compatible. =)
-landonf
Hi All,
I'm new in the list.
Here is the details:
Linux bacula 2.6.8-11-amd64-k8 #1 Wed Jun 1 01:03:08 CEST 2005 x86_64 GNU/Linux
bacula-1.36.3
File daemon's version on the windows server is: 1.38.3
The problem is this:
I added 6 more pools. There is only one volume in each pool. And when the
Hi Jari,
Thanks for your answer, but the firewall was the problem.
A.
Andras Horvai wrote:
Linux bacula 2.6.8-11-amd64-k8 #1 Wed Jun 1 01:03:08 CEST 2005 x86_64
GNU/Linux bacula-1.36.3
File daemon's version on the windows server is: 1.38.3
1.36 and 1.38 are not propably compatible enough
36 matches
Mail list logo
