On Saturday 25 October 2003 06:39 am, Leon Brooks wrote:
Every time I go to download an RPM I get asked to log in. When I log in,
the site sends me back to the welcome screen. When I work my way back
down to the download, it asks me to log in again.
Immediately before this, Konqueror was
On Saturday 25 October 2003 05:03 pm, Greg Meyer wrote:
SO it turns out to be a firmware bug after all that. I really hope you
guys don't take the heat for this in the court of public opinion.
I think i posted a few days back this was most likely the case. lg drives are
garbage. They are maybe
On Sat, 2003-10-25 at 18:21, Leon Brooks wrote:
On Sat, 25 Oct 2003 23:21, Pascal wrote:
Le Samedi 25 Octobre 2003 15:39, Leon Brooks a écrit :
Every time I go to download an RPM I get asked to log in. When I
log in, the site sends me back to the welcome screen. When I work
my way back
On Sat, 25 Oct 2003 23:23:23 -0700
Brook Humphrey [EMAIL PROTECTED] scribed on electronic parchment:
On Saturday 25 October 2003 05:03 pm, Greg Meyer wrote:
SO it turns out to be a firmware bug after all that. I really hope you
guys don't take the heat for this in the court of public
http://qa.mandrakesoft.com/show_bug.cgi?id=6227
Summary: Bugzilla does not send mail anymore
Product: Bugzilla
Version: 2.17.4
Platform: PC
OS/Version: All
Status: NEW
Severity: normal
Priority: P2
Pascal [EMAIL PROTECTED] writes:
I receive no more bugzilla notifications in cooker ?
Is this intentionnal?
fixed
--
Warly
On Sunday 26 Oct 2003 01:03, Greg Meyer wrote:
On Saturday 25 October 2003 07:20 pm, Juan Quintela wrote:
marc == Marc Guise [EMAIL PROTECTED] writes:
marc I read the post about Mdk 9.2 and LG on mandrakeusers.org. I have
cd-rw drive, marc model HL-DT-ST GCE 8400b and I have Mdk 9.2rc2
Galileo wrote:
For example find a message with a subject:
or [Cooker] Lilo Installation bug
...
I haven't had the time to test this with 9.2 but i bet that this
wasn't fixed.
well, if you want to know if something has been fixed or not file a bug
on bugzilla.
Haven't had a single reply. This
On Sunday 26 October 2003 01:58, Greg Meyer wrote:
On Saturday 25 October 2003 06:39 pm, Michael Scherer wrote:
On Sunday 26 October 2003 00:12, Greg Meyer wrote:
This appears to be an undocumented feature. Are there any others
that are interesting?
a lot.
but since they are
On Sunday 26 October 2003 09:51, Jos wrote:
On Sunday 26 Oct 2003 01:03, Greg Meyer wrote:
On Saturday 25 October 2003 07:20 pm, Juan Quintela wrote:
marc == Marc Guise [EMAIL PROTECTED] writes:
marc I read the post about Mdk 9.2 and LG on mandrakeusers.org.
I have cd-rw drive,
http://qa.mandrakesoft.com/show_bug.cgi?id=6228
Summary: Some sites have jagged fonts
Product: fontconfig
Version: 2.2.1-5mdk
Platform: PC
OS/Version: All
Status: UNCONFIRMED
Severity: normal
Priority: P2
Sharrea,
I prepared also a floppy for my laptop and have the same
reboot after several minutes trying to download the
vmlinux.
regards
El Domingo, 26 de Octubre de 2003 00:45, Sharrea Day
escribió:
On Sun, 26 Oct 2003 11:31, Francisco Alcaraz wrote:
Formated at 1743 Kb (supermount
On Sunday 26 Oct 2003 01:03, Greg Meyer wrote:
On Saturday 25 October 2003 07:20 pm, Juan Quintela wrote:
marc == Marc Guise [EMAIL PROTECTED] writes:
marc I read the post about Mdk 9.2 and LG on mandrakeusers.org. I
have cd-rw drive, marc model HL-DT-ST GCE 8400b and I have Mdk
9.2rc2
Am Sonntag, 26. Oktober 2003 11:11 schrieb Michael Scherer:
I do not know if the error is recoverable ( ie reflashing the
firmware ),
Nope, reflashing the firmware does not help. flashing before frying the
drive does help. My drive is fried (returned it for money allready) The
same drive
Could you post a .conf file for creating 2 DVD-R's?
Currently I just run MakeCD without specifying a config file; it is better to
specify a config file?
--
John Allen, mailto:[EMAIL PROTECTED]
MandrakeClub Silver Member. http://allentech.homelinux.org/
On Sun, 26 Oct 2003 01:20:35 +0200
Juan Quintela [EMAIL PROTECTED] wrote:
marc == Marc Guise [EMAIL PROTECTED] writes:
marc I read the post about Mdk 9.2 and LG on mandrakeusers.org. I have
cd-rw drive, marc model HL-DT-ST GCE 8400b and I have Mdk 9.2rc2 running.
There are no problems marc
Hello folks,
There is a problem with Icons and Menu taskbar under KDE in my system.
I have installed mandrake 9.2 today.
here are some filesets wich I have installed today morning.
kdebase-progs-3.1.3-80mdk
kdebase-kdeprintfax-3.1.3-80mdk
kdebase-common-3.1.3-80mdk
kdebase-kdm-3.1.3-80mdk
[EMAIL PROTECTED] ha scritto:
PD. Yep, whoeved decided at LG that reusing for UPLOAD_FIRMAWARE
command FLUSH_CACHE comand should be shoot. Twice.
SO it turns out to be a firmware bug after all that. I really hope you
guys don't take the heat for this in the court of public opinion.
/. posted
On Sunday 26 October 2003 01:51 am, John Allen wrote:
Could you post a .conf file for creating 2 DVD-R's?
Currently I just run MakeCD without specifying a config file; it is better
to specify a config file?
same here the only real difference is that your cd's will read cooker download
On Sunday 26 October 2003 11:55 am, Luca Olivetti wrote:
[EMAIL PROTECTED] ha scritto:
PD. Yep, whoeved decided at LG that reusing for UPLOAD_FIRMAWARE
[snipped]
Yes, the comments with enough points to be visible by default are
positive wrt mandrake and negative wrt lg hardware problem.
Now,
On Saturday 25 October 2003 04:44 pm, Tim Sawchuck wrote:
On Sat, 25 Oct 2003 23:23:23 -0700
Brook Humphrey [EMAIL PROTECTED] scribed on electronic parchment:
On Saturday 25 October 2003 05:03 pm, Greg Meyer wrote:
SO it turns out to be a firmware bug after all that. I really hope you
On Sunday 26 October 2003 12:23 pm, Brook Humphrey wrote:
On Sunday 26 October 2003 01:51 am, John Allen wrote:
Could you post a .conf file for creating 2 DVD-R's?
Currently I just run MakeCD without specifying a config file; it is
better to specify a config file?
same here the only
On Sunday 26 October 2003 07:28 am, John Allen wrote:
On Sunday 26 October 2003 12:23 pm, Brook Humphrey wrote:
On Sunday 26 October 2003 01:51 am, John Allen wrote:
Could you post a .conf file for creating 2 DVD-R's?
Currently I just run MakeCD without specifying a config file; it is
On Sunday 26 October 2003 1:05 pm, Greg Meyer wrote:
On Sunday 26 October 2003 07:28 am, John Allen wrote:
[snipped]
I've been making DVD-R's not problem. Where is the doc for the .conf
files I find them unreadable, I would be most grateful if anybody can
point me in the right direction
On Sunday 26 October 2003 1:19 pm, John Allen wrote:
On Sunday 26 October 2003 1:05 pm, Greg Meyer wrote:
On Sunday 26 October 2003 07:28 am, John Allen wrote:
[snipped]
I've been making DVD-R's not problem. Where is the doc for the .conf
files I find them unreadable, I would be most
Hi,
I uploaded a new version of my gideon/kdevelop3 packages. The packages were
compiled on a stock Mandrake 9.1 and tested under 9.2, so both distors can
use them.
%changelog
* Sat Oct 25 2003 el cuco [EMAIL PROTECTED]
- Fixed version (now it's [Y][M][D], better for incremental updates)
-
Greg Meyer wrote:
On Sunday 26 October 2003 07:28 am, John Allen wrote:
On Sunday 26 October 2003 12:23 pm, Brook Humphrey wrote:
On Sunday 26 October 2003 01:51 am, John Allen wrote:
Could you post a .conf file for creating 2 DVD-R's?
Currently I just run MakeCD without
http://qa.mandrakesoft.com/show_bug.cgi?id=6229
Summary: KDE subpixel hinting disrupts fonts appearance
irrevocably.
Product: kdebase
Version: 3.1.3-9mdk
Platform: PC
OS/Version: All
Status: UNCONFIRMED
John Allen [EMAIL PROTECTED] writes:
On Sunday 26 October 2003 12:23 pm, Brook Humphrey wrote:
On Sunday 26 October 2003 01:51 am, John Allen wrote:
Could you post a .conf file for creating 2 DVD-R's?
Currently I just run MakeCD without specifying a config file; it is
better to specify
after ugraded of this afternoon my kde daesnt work
i have a plain cooker
some tips?
thanks
Francesco
, 26 2003, 16:20,francesco.melo:
after ugraded of this afternoon my kde daesnt work
i have a plain cooker
some tips?
thanks
Francesco
start an xterm instead of kde (choose a failsafe mode or something) and type
startkde.
--
diego, 30 Tishrey 5764
Please avoid sending me Word
On Sunday 26 October 2003 16:59, Giuseppe Ghibò wrote:
Speaking of GIMP, anyone knows how to do a correction of a
backlight exposed photo snapshot with GIMP (or cinepaint)?
I've done a bunch of these. Best results I've come up with have
resulted from taking an outline of the shadowed subjects
Okay, I give up. Where is the @[EMAIL PROTECTED] GD urpmi line for commercial club
rpms? The mirror script is just a list of ftps for cooker contrib.
There is no script at all.
I even tried the urpmi.setup, which immediately dies on my cooker box.
Please, it shouldn't be this hard to find
http://qa.mandrakesoft.com/show_bug.cgi?id=6230
Summary: du produces incorrect results when given more than one
directory
Product: coreutils
Version: 5.0-6mdk
Platform: PC
OS/Version: All
Status: UNCONFIRMED
On Sunday 26 October 2003 02:43 pm, Tibor Pittich wrote:
Re: [Cooker] what's all this then?
gotcha
--
Confucious say:
Kotex not best thing on earth, but next to best.
áéåí øàùåï, 26 áàå÷èåáø 2003, 18:47, ðëúá òì éãé [EMAIL PROTECTED]:
Please change your release to be a value which rpm will consider to be
less than 1, otherwise unsuspecting users who install your package
will be stranded with your package when a real kdevelop package is
released. This is a
On Sunday 26 October 2003 11:04, [EMAIL PROTECTED] wrote:
Please, it shouldn't be this hard to find the fsckin' urpmi
setup for club. Someone at Mdk pull their head out and put
this somewhere quasi-prominent. It is THE primary reason for
me to pay for club.
You've tried:
# drakclub
?
--
We've all heard that a million monkeys banging on a million
typewriters will eventually reproduce the works of Shakespeare.
Now, thanks to the Internet, we know this is not true.
- Robert Wilensky, University of California
http://qa.mandrakesoft.com/show_bug.cgi?id=6020
[EMAIL PROTECTED] changed:
What|Removed |Added
Status|ASSIGNED|RESOLVED
Resolution|
, 26 2003, 18:47,[EMAIL PROTECTED]:
todo for next version:
* fix the icon problem (the app does not have an icon for some reason) *
compile also the dot program. apparently I am missing some
functionality.
Here are the links:
http://iglu.org.il/pub/Hebrew/diego/kdevelop/
LB well, if you insist i'll just state it works correctly for me.
LB but if you try and give some more useful info (eg output of commands)
LB we could see if it is a bug or another problem.
Well this was with 9.1 haven't had the time to test it with 9.2.
Anyway the situation was something like
Thierry Vignaud ha scritto:
Pierre Jarillon [EMAIL PROTECTED] writes:
$ strings /mount-point-of-mdk9.2-CD1/doc/install/images/LMDK.jpg | head
-2 JFIF
Photoshop 3.0
Cmon, it's PhotoShop 3.0, which is problably 5 or 6 years old, not
latest PhotoShop 7! Probably the graphist is using an old MAC.
On 26. October 2003 at 14:36, illogic-al wrote:
ftp://mandrake.redbox.cz/Mandrake-iso/i586/
Mandrake92-updated-cd1.iso ISO 665,094 KB 2003.10.24 18:09:00
Mandrake92-updated-cd2.iso ISO 664,858 KB 2003.10.24 18:22:00
Mandrake92-updated-cd3.iso ISO 664,858 KB 2003.10.24 18:30:00
Leon Brooks ha scritto:
On Thu, 23 Oct 2003 01:17, Guy McArthur wrote:
Can Gimp 1.3 do these?
* rotate by arbitrary # of degrees
* free rotate
* perspective transform
* other warping transforms
Apologies for the off-topic. I tried looking for a gimp-1.3 features
list.
Even old GIMP does
bccz Because it's the key for security updates, and it should be imported for
bccz you by urpmi.addmedia when you setup a security update source.
Didn't know that. I have a local rsync mirror of security updates
which are then available to the rest of the machines in my network.
No problem. I
On Sun, 26 Oct 2003, Austin wrote:
I assume that not all of our platforms little endian...
Is there a simple test I can run in bash to determine the endianness at
build-time?
In bash, i don't think it is possible. Well, you could do it like autoconf
does it. In configure, it checks for
todo for next version:
* fix the icon problem (the app does not have an icon for some reason) *
compile also the dot program. apparently I am missing some
functionality.
Here are the links:
http://iglu.org.il/pub/Hebrew/diego/kdevelop/
What Mandrake release is it?
9.1
Do you have a jre installed?
Yes 1.4.2
Do you have gcc-gcj installed? (and which version
of course else it's required by the spec file
for those of us who
can't remember what it was on the release you are
running)
gcc-java-3.2.2-3mdk
Which 'java' binary is
LB the second is phrased in a way i cannot understand
Simple lvm is not functioning properly when setup on top of raid1.
LB libraries, and they won't run if mysql libraries are not installed.
didn't know that it worked that way. Thanks.
LB maybe if you tried the patch before, you could also
I assume that not all of our platforms little endian...
Is there a simple test I can run in bash to determine the endianness at
build-time?
Austin
--
Austin Acton
Synthetic Organic Chemist, Teaching Assistant, Ph.D. Candidate
Department of
bccz Because it's the key for security updates, and it should be
imported for bccz you by urpmi.addmedia when you setup a security
update source.
Didn't know that. I have a local rsync mirror of security updates
which are then available to the rest of the machines in my network. No
problem.
Galileo wrote:
LB the second is phrased in a way i cannot understand
Simple lvm is not functioning properly when setup on top of raid1.
well, if you insist i'll just state it works correctly for me.
but if you try and give some more useful info (eg output of commands)
we could see if it is a
Wondering if gc has seen this:
http://monkey-bubble.tuxfamily.org/screenshots.html
d.
On Sunday 26 October 2003 08:34 am, Spencer wrote:
I don't think there is any, which is why I started the twiki page. If I
can piece together everybody's tips and tricks and uses of mkcd, maybe we
can get a good doc on the matter. So please report your usage in detail,
or if you have
Okay, I give up. Where is the @[EMAIL PROTECTED] GD urpmi line for commercial club
rpms? The mirror script is just a list of ftps for cooker contrib.
There is no script at all.
I even tried the urpmi.setup, which immediately dies on my cooker box.
Please, it shouldn't be this hard to find the
On Saturday 25 October 2003 01:53 pm, Francisco Alcaraz wrote:
I am absolutely according with this; I am introducing lot of
people to use Mandrake and installing it in his computers,
but everythime we have to spend lot of time donwloading
updates; if every time updated isos were avalaible for
On Sunday 26 October 2003 18:07, [EMAIL PROTECTED] wrote:
Wondering if gc has seen this:
http://monkey-bubble.tuxfamily.org/screenshots.html
yes, a news already passed on a french linux website 2 month ago.
--
Michaël Scherer
On Sunday 26 October 2003 05:08 pm, R N dev wrote:
ERROR: Error 65280 occurred while making
/usr/src/RPM/BUILD/oo_1.1rc4_src/officecfg/registry/schema
dmake: Error code 1, while making 'build_all'
---* TG_SLO.MK *---
error: Bad exit status from /var/tmp/rpm-tmp.78934
(%build)
I had same
On Sun, 2003-10-26 at 10:04, [EMAIL PROTECTED] wrote:
You've tried:
# drakclub
Curl is broken. I have to run urpmi.addmedia --wget on the command line.
I finally found it, but the links on the club site are wrong.
--
Brad Felmey [EMAIL PROTECTED]
Uncompensated Mandrake Guinea Pigs, Inc.
ftp://mandrake.redbox.cz/Mandrake-iso/i586/
Mandrake92-updated-cd1.iso ISO 665,094 KB 2003.10.24 18:09:00
Mandrake92-updated-cd2.iso ISO 664,858 KB 2003.10.24 18:22:00
Mandrake92-updated-cd3.iso ISO 664,858 KB 2003.10.24 18:30:00
Mandrake92-updated-cd4.iso ISO 658,006 KB 2003.10.24
E Would it be possible to re-package the ISO with the updates included
E and/or point me towards instructions to tell me how to make the new ISO
Anybody considered adding this patch:
http://www.mandrakelinux.com/patches/9.2/pubkey/patch.pl
to fix this bug in installation :
http://qa.mandrakesoft.com/show_bug.cgi?id=6041
[EMAIL PROTECTED] changed:
What|Removed |Added
Status|UNCONFIRMED |RESOLVED
Resolution|
http://qa.mandrakesoft.com/show_bug.cgi?id=5346
--- Additional Comments From [EMAIL PROTECTED] 2003-10-27 00:09 ---
It is said in the VMvare mandrake installation guide that you should:
1. use lilo with text menu
2. install XFree 4 when given the choice
3. NOT test the display
Le Dimanche 26 Octobre 2003 22:59, Giuseppe Ghibò a écrit :
Speaking of GIMP, anyone knows how to do a correction of a
backlight exposed photo snapshot with GIMP (or cinepaint)?
Right button (cursor on the picture), image, color
Then use the functions labelled (francese) :
Niveau (Level ?)
Le Dimanche 26 Octobre 2003 22:55, Giuseppe Ghib a crit :
IMHO the main obstable is the Pantone proprietary system.
This problem must be solved to allow free software used by
professional printers. But I can't imagine free inks :-(
If ever you have only a shadow of a solution, tell us, please
On Sun, 2003-10-26 at 15:59, [EMAIL PROTECTED] wrote:
But why do you need it? A program probably already uses this in
configure if it matters?
Stupid package. It asks you to define it manually in the makefile.
Makes it tricky for rpm builders...
Thanks Danny,
Austin
--
http://qa.mandrakesoft.com/show_bug.cgi?id=6232
Summary: BuildRequires: pam-devel missing
Product: userdrake
Version: 0.92-9mdk
Platform: PC
URL: http://eijk.homelinux.org/build/cooker/i586/problem/user
drake-0.92-24mdk
http://qa.mandrakesoft.com/show_bug.cgi?id=6237
Summary: Revert to official package
Product: rpmdrake
Version: 2.1-9mdk
Platform: Other
OS/Version: All
Status: UNCONFIRMED
Severity: enhancement
Priority: P2
On Sun, 2003-10-26 at 20:56, Pierre Jarillon wrote:
Le Dimanche 26 Octobre 2003 22:55, Giuseppe Ghibò a écrit :
IMHO the main obstable is the Pantone proprietary system.
This problem must be solved to allow free software used by
professional printers. But I can't imagine free inks :-(
If
http://qa.mandrakesoft.com/show_bug.cgi?id=6232
--- Additional Comments From [EMAIL PROTECTED] 2003-10-26 17:03 ---
Created an attachment (id=937)
-- (http://qa.mandrakesoft.com/attachment.cgi?id=937action=view)
diff for userdrake.spec file
--
Configure bugmail:
Pierre Jarillon wrote:
Le Dimanche 26 Octobre 2003 22:55, Giuseppe Ghib a crit :
IMHO the main obstable is the Pantone proprietary system.
This problem must be solved to allow free software used by
professional printers. But I can't imagine free inks :-(
If ever you have only a shadow
http://qa.mandrakesoft.com/show_bug.cgi?id=6236
Summary: See updates in unofficial repositories.
Product: rpmdrake
Version: 2.1-9mdk
Platform: Other
OS/Version: All
Status: UNCONFIRMED
Severity: enhancement
http://qa.mandrakesoft.com/show_bug.cgi?id=6175
--- Additional Comments From [EMAIL PROTECTED] 2003-10-27 00:07 ---
fixed for me with kernel 2.4.22-18 (found in updates for 9.2), and nolapic option.
--
Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email
---
On Sun, 26 Oct 2003 11:41, AAW wrote:
Sun's j2sdk-1.4.2-fcs installed (same results if not installed).
try this before building (might need to tweak the path):
export JAVA_HOME=/usr/jave/j2re1.4.0_02
if you still get the GIJ message, try
export OVERRIDE_JAVA_HOME=/usr/jave/j2re1.4.0_02
http://qa.mandrakesoft.com/show_bug.cgi?id=2686
--- Additional Comments From [EMAIL PROTECTED] 2003-10-27 00:09 ---
It appears to be fixed in 9.2. Everything works fine...Not sure what was fixed,
but thanks!
--
Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email
On Sun, 2003-10-26 at 13:54, Austin wrote:
On Sun, 2003-10-26 at 15:59, [EMAIL PROTECTED] wrote:
But why do you need it? A program probably already uses this in
configure if it matters?
Stupid package. It asks you to define it manually in the makefile.
Makes it tricky for rpm
http://qa.mandrakesoft.com/show_bug.cgi?id=6233
Summary: BuildRequires missing
Product: drakfirsttime
Version: 0.92-3mdk
Platform: PC
URL: http://eijk.homelinux.org/build/cooker/i586/problem/drak
http://qa.mandrakesoft.com/show_bug.cgi?id=6233
--- Additional Comments From [EMAIL PROTECTED] 2003-10-26 17:09 ---
Created an attachment (id=938)
-- (http://qa.mandrakesoft.com/attachment.cgi?id=938action=view)
diff for drakfirsttime.spec
--
Configure bugmail:
http://qa.mandrakesoft.com/show_bug.cgi?id=6235
[EMAIL PROTECTED] changed:
What|Removed |Added
Status|UNCONFIRMED |RESOLVED
Resolution|
http://qa.mandrakesoft.com/show_bug.cgi?id=6231
[EMAIL PROTECTED] changed:
What|Removed |Added
CC||[EMAIL PROTECTED]
---
http://qa.mandrakesoft.com/show_bug.cgi?id=6231
--- Additional Comments From [EMAIL PROTECTED] 2003-10-26 17:25 ---
I confirm. Here are the error messages:
[EMAIL PROTECTED] leberre]$ gnucash
http://www.intel.com/support/platform/ht/os.htm
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Jan Ciger wanted us to know:
computers. Setting up NTP server there is :
a) overkill
Maybe, for a dialup, I'll give you that.
b) quite tricky if you do not know what you are doing
I think someone should add to a wiki somewhere:
urpmi ntp
echo
http://qa.mandrakesoft.com/show_bug.cgi?id=2986
--- Additional Comments From [EMAIL PROTECTED] 2003-10-26 18:54 ---
This bug seems to be still valid in mdk 9.2: ggv is not in the viewer menu for
pdf files.
--
Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email
http://qa.mandrakesoft.com/show_bug.cgi?id=2986
[EMAIL PROTECTED] changed:
What|Removed |Added
Status|UNCONFIRMED |RESOLVED
Resolution|
http://qa.mandrakesoft.com/show_bug.cgi?id=6235
Summary: GConf2-2.4.0.1-1.1.92 and gnucash
Product: GConf2
Version: 2.4.0.1-1mdk
Platform: PC
OS/Version: All
Status: UNCONFIRMED
Severity: normal
Priority: P2
http://qa.mandrakesoft.com/show_bug.cgi?id=6179
--- Additional Comments From [EMAIL PROTECTED] 2003-10-26 19:39 ---
thanks for the workaround.
--
Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email
--- You are receiving this mail because: ---
You are on
http://qa.mandrakesoft.com/show_bug.cgi?id=6234
Summary: Rosegarden RPM contains bug described in FAQ 5.7
Product: rosegarden4
Version: 0.9.1-1mdk
Platform: PC
URL: http://www.all-day-
http://qa.mandrakesoft.com/show_bug.cgi?id=2986
[EMAIL PROTECTED] changed:
What|Removed |Added
Status|RESOLVED|UNCONFIRMED
Resolution|FIXED
http://qa.mandrakesoft.com/show_bug.cgi?id=6231
Summary: gnucash crashes with new gconf
Product: GConf
Version: 1.0.9-12mdk
Platform: PC
OS/Version: All
Status: UNCONFIRMED
Severity: normal
Priority: P2
http://qa.mandrakesoft.com/show_bug.cgi?id=6218
Summary: oggenc : Average bitrate stick to 0,8 kb/s
Product: vorbis-tools
Version: 1.0-7mdk
Platform: PC
OS/Version: All
Status: RESOLVED
Severity: normal
Priority:
http://qa.mandrakesoft.com/show_bug.cgi?id=5858
--- Additional Comments From [EMAIL PROTECTED] 2003-10-26 18:30 ---
I confirm what ACPI responsible of dead lock.
My config is Mandrake 9.2 with kernel 2.4.22-10 and now 2.4.22-18.
I do tests with both xawtv and xdtv, but i think i
http://qa.mandrakesoft.com/show_bug.cgi?id=5157
[EMAIL PROTECTED] changed:
What|Removed |Added
Status||CLOSED
--- Additional Comments
http://qa.mandrakesoft.com/show_bug.cgi?id=6228
--- Additional Comments From [EMAIL PROTECTED] 2003-10-26 16:51 ---
edit /etc/fonts/fonts.conf . if what you want is handholding to do this, then
this is an enhancement request, not a bug, and should be filed as such.
--
Configure
http://qa.mandrakesoft.com/show_bug.cgi?id=5346
--- Additional Comments From [EMAIL PROTECTED] 2003-10-27 01:57 ---
Would it be possible for the Mandrake installer to prompt for the VMWare tools
during install? That would make installation under VMWare *so* much easier.
--
http://qa.mandrakesoft.com/show_bug.cgi?id=6167
--- Additional Comments From [EMAIL PROTECTED] 2003-10-26 17:01 ---
It's not a problem on the IMAP side because mozilla-mail is performing well.
I will look at reporting this to Ximian too, but it is much worse than the
previous
http://qa.mandrakesoft.com/show_bug.cgi?id=6207
[EMAIL PROTECTED] changed:
What|Removed |Added
Status||UNCONFIRMED
--- Additional
PPC Developers,
I have a small JNI application that I have developed in MacOS X. I
have ported it over to both RedHat Linux and Windows 2000, In both
cases it fails when it tries the load the shared-library with the
native code. I have just read in the Mac documentation that the
Machine ... 350MHz iMac with 256 Meg of RAM. Otherwise standard excepte for
external usb//parallel converter for the Laserjet printer. Very little
progress until I read the instructions!!
Follwed up on Stew Benedict's advice ... to NOT label the bootstrap partition
as /boot! Also (after
100 matches
Mail list logo