On Thu, Jan 21, 2021 at 06:23:56PM -0600, David Wright wrote:
> Yes, that documents what we normally observe as a %eth0 or %1 suffix
> for IPv6 addresses which selects the interface to use. "Requires"
> (unemphasised in the original) mean that it is necessary to identify a
> particular zone, but
On Thu, Jan 21, 2021 at 08:04:05AM +0100, Marc SCHAEFER wrote:
> fe80::1 is specifically a link-local scope, a bit like if you try to
> access a class variable without telling in what class it is.
Reading RFC-4291 [1], 2.5.6 (link-local addresses) and RFC-4007 [2] 6,
Zones Indices:
B
On Wed, Jan 20, 2021 at 11:59:46PM -0600, David Wright wrote:
> As far as the address is concerned, fe80::1 is perfectly formed,
> but ambiguous. Is that what your jessie error message used to say?
The error was one of the usual kernel errors (-EINVALID probably), see
below.
Actually, stretch
Hello,
I experiment a change of behaviour between the kernel of Debian jessie
and Debian buster.
Namely, before, ping6 fe80::1 would fail, since it is ambiguous (fe80::1
is a link scope, thus a zone/interface scope ID is required).
With buster, it tries the first Ethernet interface, no error
Jerry Mellon writes:
>Hello,
>New to Debian, but have gotten Debian 10.7 loaded on to my system. I
>have an ASUS gaming laptop(dont use it for gaming) with 12gb of memory
>and intel corei7 and a 500gb hard drive.
>
>My question is what is the best(use dummy for linus statements please)
>way to
isque est chiffré.
Il ne me passe pas l'invite pour entrer la phrase de passe.
Donc, je ne sais pas déverrouiller le disque.
Et, forcément, l'ordi ne sait rien y écrire.
> Gaëtan
>
--
Jean-Marc
OpenPGP_signature
Description: OpenPGP digital signature
idée de comment commencer les recherches ou l'investigation pour trouver
l'origine du problème ?
Quelqu'un d'autre fait face au même soucis ?
--
Jean-Marc
OpenPGP_signature
Description: OpenPGP digital signature
nne.
Bon, c'est résolu.
Merci.
--
Jean-Marc
OpenPGP_signature
Description: OpenPGP digital signature
eutrinet/neutrinet-test tun0 1500 1570
80.67.181.137 255.255.255.128 init
WARNING: Failed running command (--up/--down): could not execute
external program
Exiting due to fatal error
--
Jean-Marc
OpenPGP_signature
Description: OpenPGP digital signature
rien trouvé de bien probant.
Toute suggestion bienvenue.
Debian 10.7
Linux 4.19.0-13-armmp #1 SMP Debian 4.19.160-2 (2020-11-28) armv7l GNU/Linux
openvpn 2.4.7-1
--
Jean-Marc
Reco writes:
>
>And what purpose would it serve? IMO it's not a backup unless it's
>stored in a way that's inaccessible to the system its taken from (until
>it's actually needed of course).
>
>Reco
IMHO, there are two levels of backup. The more common use is to undo
user error - deleting the
Andrei POPESCU writes:
>
>Automatic mirroring / synchronizing is unsuitable for backups, because
>it will also sync accidental changes to files (including deletions) or
>filesystem corruptions in case of power outage or system crash (that may
>lead to corrupted files or entire directories
--- Mail original -
>
>> Jami est disponible sous Debian 10 dans les dépôts et sur le site :
>> https://jami.net/download-jami-linux/
>
--
Jean-Marc
OpenPGP_signature
Description: OpenPGP digital signature
Gray "${1%}gray.jpg"
}
find ton truc | while read -r i; do
f_image_fusion "$i"
done;
marc
simultanément (c'est l'hiver: on
se chauffe comme on peut)
marc
"--[chaine]-" | sed 's/\[/-/g; s/\]/-/g'
---chaine--
. un sed "étendu" :
$ echo "--[chaine]-" | sed -E 's/(\]|\[)/-/g'
---chaine--
--
Jean-Marc
Le 14/12/20 à 16:11, Bernard Isambert a écrit :
> man 7 regex :
> Pour insérer un « ] » littéral dans la li
: 00:00:58 / 00:00:58 (99%)
Bref, ça fonctionne avec les deux formats de paramètres.
Je suis curieux de savoir si A. Valmer arrive à afficher quelque chose
en appelant mpv comme tu le décris.
--
Jean-Marc
OpenPGP_signature
Description: OpenPGP digital signature
re-salut,
Le 10/12/20 à 15:10, ajh-valmer a écrit :
> On Thursday 10 December 2020 13:44:21 Jean-Marc wrote:
>> Bon, peut-être que vlc sera plus conciliant.
>> Si vlc est installé, tu peux essayer ça :
>> vlc v4l2:///dev/video0
>
> Bingo, avec vlc, ça marche.
Co
Le 10/12/20 à 13:37, ajh-valmer a écrit :
> On Thursday 10 December 2020 13:29:36 Jean-Marc wrote:
>> Tu as essayé la commande suivante ?
>> mpv /dev/video0 :
>
> Cette commande donne :
>
> Playing: /dev/video0
> Failed to recognize file format.
> Exiting..
pages au temps du noyau 2.6.
Effectivement, tout ça date un peu.
:-)
> Bonne journée
>
--
Jean-Marc
OpenPGP_signature
Description: OpenPGP digital signature
liste du BxLUG il n'y a pas
très longtemps :
https://chahut.domainepublic.net/pipermail/linux-bruxelles/2020-November/173363.html
Il faut aussi t'assurer que le bon pilote est installé.
> Merci d'une aide et bonne soirée.
>
> A. Valmer
>
--
Jean-Marc
OpenPGP_signature
Description: OpenPGP digital signature
:) je vais lire plus en détail des que j'en ai le temps.
merci de mettre ca en avant!
marc
Hello,
I quickly grepped my DEBIAN-USER mailing-list file but did not find any
leapsecond in it, thus this message.
I get this error on all of my buster machines although I think they are
uptodate:
Dec 1 09:34:39 virtual ntpd[2432]: leapsecond file
('/usr/share/zoneinfo/leap-seconds.list'):
> Lors d'une install partie, il me semble peu judicieux de faire une
> update et peu probable que quelqu'un le demande.
nous parlions de la configuration de la machine, pas du déroulement de
l'install party elle-même.
cordialement,
marc
anière simple.
si si... d'ailleurs tu peux continuer a utiliser ton DE pendant que le
l'outils graphique met a jour mais on retombe sur la discution initiale:
si ca se fait en parallèle de l'activité, comment amener les
utilisateurs a faire les mises a jour.
merci pour ton retour,
cordialement,
marc
t.
*excellente remarque*! pour le moment ce sont les gens de l'asso qui
font généralement les remontées de bug mais du coup ca coupe le public
d'une contribution potentiel. je le note.
> Ci-joint un article sur les consciences en circulations.
merci
marc
lement à le prendre pour un débile pour ma
part.
> peut-être : apt upgrade se déroule presque toujours seul, mais il
> demande quelquefois de faire des choix ; les notifications sont liées
> à un environnement graphique spécifique.
bonne pioche!! mettre la priority à low ou le frontend a noninteractive!
je note! merci!
marc
re à poser
mais on a quelques idées)
après: declicks (desclicks.net/) est présent mercredi et ils ont pas mal
d'install parties au compteur (en tout cas bien plus que moi) et j'ai
hate d'avoir leur point de vue.
cordialement,
marc
olution mais je préfère ma version (si elle est
réalisable ce qui n'est pour le moment pas sur).
cordialement,
marc
a besoin d'une
> solution à granularité plus fine que ça?
par experience: ca les fait chier de mettre a jour donc autant ne pas
mettre la liste des paquets a jour tout le temps sauf qu'on negocie
pas avec la securité donc ca c'est a mettre a jour 1* par jour.
cordialement,
marc
99% des dockerfiles par exemple).
par contre ce que je dis plus haut c'est que pour monsieur toulmonde et
madame michu, apt fait bien l'affaire :)
cordialement,
marc
On Fri, Nov 27, 2020 at 11:12:24AM +0100, Fernand wrote:
> va être délicate à réaliser, même en Alsace (Troll du vendredi ), en
> effet, le nombre de ports disponibles pour l'écoute n'est "que" de 2^16
> soit 65535.
oops oui! merci :)
marc
redémarrage.
De manière générale: si vous avez des recommendations à faire: on est
tout ouie :)
cordialement,
marc
maintains a current Firefox build as AppImage.
Hi,
Thanks for your answer. I was able to get clipgrab to compile but the
AppImage file is a later version and may be a better choice if it will
run on Debian.
I am using it on a Ddevuan system and it works just fine.
Marc
On Tue, Nov 17, 2020 at 07:04:59AM -0500, The Wanderer wrote:
> FWIW, I parsed this as "and possibly file a(nother) bug report[ about
> this bug, since the one I thought I remembered having filed before seems
> to have disappeared, if it ever existed in the first place]".
Exactly, thank you for
Hello,
In jessie, the kernel had a very annoying bug: if you did I/O on
multiple sr devices, the global lock in sr.c would slow down
to a crawl.
E.g. 5 DVD-R written to in parallel gave the same performance as
one writing; and ejecting the DVD in parallel was completely
sequential.
Based on
On Sun, Nov 08, 2020 at 05:54:14PM +0100, Marc SCHAEFER wrote:
> What could I try to do?
Thanks to some people around here (private replies), I tried:
- finding an option in the BIOS about 64 bit PCI addresses,
none found
- setpci -s 01:00.0 COMMAND=0x02
- removing all ca
Dans ce cas comment vérifier qu'il n'y a que des ports nécessaires
> qui sont ouverts ?
Concernant les ports ouverts, tu as la commande qui te donnera tout
ce qu'il faut savoir.
Voici un exemple pour faire la liste de ce qui "écoute" en TCP et en UDP
et quel est le process qui
Hello,
I have a Mellanox card, which is detected, however on one machine:
01:00.0 Network controller: Mellanox Technologies MT27500 Family [ConnectX-3]
Subsystem: Mellanox Technologies MT27500 Family [ConnectX-3]
Flags: fast devsel, IRQ 16
Memory at dfb0 (64-bit,
rogramme en C mais si tu dégaines
sh -c, ca n'est plus une explication.
cordialement,
marc
optimale).
Fais une recherche sous Youtube sur "la chaîne astro" ou "astronote" ou
"Dk astronomie" pour des utilisations détaillées et chaînées des
différents logiciels.
Bonne journée,
Marc
PS : et désolé pour le mail privé, j'ai cliqué trop vite
optimale).
Fais une recherche sous Youtube sur "la chaîne astro" ou "astronote" ou
"Dk astronomie" pour des utilisations détaillées et chaînées des
différents logiciels.
Bonne journée,
Marc
PS : et désolé pour le mail privé
bineEGlHdQ19y.bin
Description: PGP/MIME version identification
encrypted.asc
Description: OpenPGP encrypted message
share/applications/-mimeapps.list
Sinon, il y a aussi la doc :
https://wiki.archlinux.org/index.php/XDG_MIME_Applications
https://www.freedesktop.org/wiki/Specifications/shared-mime-info-spec/
Et tout ça est aussi utilisé par les gestionnaires de fichiers.
> Merci d'avance
>
> --
> Benoit
On 10/11/20 2:04 PM, Marc Shapiro wrote:
On 10/11/20 6:34 AM, Stefan Monnier wrote:
That did it. I am assuming that the system was just in the process of
changing from the initrc to the actual running system? But how do I
get the
boot sequence to activate the LVs automatically each time
> > ln -s =rc(:A:h) ~/local/bin/9
> > du coup la commande 9/sed est le sed de 9base.
> Ah génial, merci beaucoup ! :)
avec plaisir!
j'ai oublié de préciser que ~/local/bin est dans mon $path.
marc
ems to be getting activated, but not the root LV, so it
keeps trying to mount an LV that is not yet activated and eventually it
times out and drops me into a shell. From there, I can manually
activate all LVs and exit the shell and the boot process continues
successfully.
Marc
sed de 9base.
cordialement,
marc
'utiliser les outils
des base, lire des les man et les papiers d'intro de cat-v.org:
c'est fascinant.
cordialement,
marc
time I boot the system.
Marc
trying to put everything on
LVM so that I can use snapshots to get consistent backups of a running
system.
Marc
about $t: `{file $t}
tu trouves des exemples ici: http://doc.cat-v.org/plan_9/4th_edition/papers/rc
un bon exemple de rc+awk est werc: http://werc.cat-v.org/
cordialement,
marc
'était pas la question :)
bon we
marc
res permet souvent de découvrir des astuces
qui sont dispos même sur des environements très petits (genre
toybox/busybox).
cordialement,
marc
1: je ne sais pas si cette liste est le bon canal (c'est un peu off
topic). je te proposerais bien de t'inscrire à shell (la liste de shell
scripting
Bonjour Charles,
> > et il me semble que meme sous debian (ou ubuntu?) il avait été évoqué de
> > virer bash pour dash. ce serait logique!
> c'est fait depuis Squeeze
ah ben voilà :)
cordialement,
marc
alpine, openwrt: dash (busybox), openbsd: ksh, kali et macos: bientot zsh
et il me semble que meme sous debian (ou ubuntu?) il avait été évoqué de
virer bash pour dash. ce serait logique!
cordialement,
marc
en ayant des features que j'attend
toujours de voir dans les autres langages
alors écris tes scripts en perl.
> Après si tu veux t'amuser à récrire tes scripts, tu peux! Mais je ne
> sais pas si il y a un outil pour la conversion de script.
nope et ca n'aurait pas de sens je crois :)
a+
marc
rend compte que la puissance
de zsh m'a fait passé à coté de l'élégance de commandes comme bc, mkfifo,
xargs, ...
aussi j'ai tendance maintenant à écrire des scripts avec des shells
beaucoup plus légers (rc a ma préférence mais il y a aussi dash et
mksh).
cordialement,
marc
plus élégante.
bonne journée à toi
marc
salut,
> Il semble y avoir cette fonctionnalité sous zsh mais je n'ai rien trouvé
> pour bash.
> Une idée?
passer sous zsh évidement :)
FYI (sans troller ni tenter de te sortir du coté obscur):
* sous dash ou rc j'ai juste une fonction x qui appelle xdg-open
x () xdg-open "$@"
* sous zsh
salut la liste,
Quelqu'un a déjà essayé ça : Pinephone et Mobian ?
https://www.lafilacroche.com/post/premiers-pas-avec-pinephone-edition-postmarketos.html
Bonne fin de dimanche.
Jean-Marc
https://6jf.be/keys/ED863AD1.txt
https://6jf.be/keys/ED0B8558.txt
pgpsH22fFJWF3.pgp
Description: PGP
On 9/23/20 10:02 PM, Marc Shapiro wrote:
I am currently running Stretch, with alsa and pulseaudio.
This box has three users. My wife and daughter both get sound through
Firefox, as well as 'play filename.mp3'. Neither method works for my
login. When using 'aplay filename.mp3' all users
the same thing under my wife's and daughter's
login and the sound was going to the 'Built-in Audio Analog Stereo'
How do I tell Alsa/PulseAudio to use the Built-in sound device, and not
the loopback device?
Marc
f et تج.xls en Bei Jing .pdf et tj.xls
> Un mv le permet aussi presque toujours.
oui mais avec mv t'es obligé de deviner le nom des symboles.
bon de toute façon ca colle plus trop puisque comme le signalait
Nicolas: le problème est l'exact inverse: c'est ton fichier qui est
nommé avec des caractères non-utf.
a+
marc
oins que tu ne souhaites tout simplement virer
tous les chars autres que ceux de l'ascii standard. auquel cas tu peux
jouer avec l'excellent module Text::Unidecode.
perl -CA -MText::Unidecode -E'
map { rename $_, unidecode $_ } @ARGV
' "北亰.pdf" "تج.xls"
va renommer 北亰.pdf et تج.xls en Bei Jing .pdf et tj.xls
cordialement,
marc
nt une façon de dire
que si tu veut les détails, c'est là que ça se passe.
cordialement,
marc
expliquer à tes
correspondants que les pj c'est mal.
cordialement,
marc
tu devrais pouvoir adapter à ton
problème.
cordialement,
marc
On 9/16/20 9:12 PM, Patrick Bartek wrote:
On Wed, 16 Sep 2020 19:44:03 -0700
Marc Shapiro wrote:
On 9/16/20 5:55 PM, David Wright wrote:
On Wed 16 Sep 2020 at 16:15:12 (-0700), Patrick Bartek wrote:
On Wed, 16 Sep 2020 13:52:15 -0400
Greg Wooledge wrote:
On Wed, Sep 16, 2020 at 10:32
who works for
Canonical, and he complains about systemd all the time.
If anyone can suggest any other options, I am open to suggestions.
Marc
, what is the easiest way to
accomplish it?
Marc
On 9/12/20 12:29 AM, Sven Joachim wrote:
On 2020-09-11 22:03 -0700, Marc Shapiro wrote:
Is there any option to have 'dpkg --get-selections' NOT include
automatically installed packages?
No, dpkg has no notion of automatically installed packages, that is an
apt concept.
Otherwise, all
Is there any option to have 'dpkg --get-selections' NOT include
automatically installed packages? Otherwise, all packages show as
manually installed, including those that would otherwise have been
automatically installed.
Marc
, though. It doesn't have the versatility of doing it manually.
Marc
On Sat, Aug 15, 2020, 4:53 AM Joe wrote:
> On Sat, 15 Aug 2020 06:30:13 -0500
> Richard Owlett wrote:
>
> > Just missed girlfriend's birthday by 6 weeks :{
> > [just sent a 'mea culpa' email.]
> >
t même là il m'arrive de faire de la conversion. j'ai ca
dans mes libs sh:
yaml2json () perl -MYAML -MJSON -0 -E 'say encode_json Load <>' "$@"
json2yaml () perl -MYAML -MJSON -0 -E 'say Load encode_json <>' "$@"
bon debut de semaine.
marc
(awk, perl, sh,...). au
final tu as quelque chose de
* plus souple
* plus efficace
* indépendant de jq
bon dimanche
marc
On Mon, Aug 10, 2020 at 07:03:26PM +0200, Marc SCHAEFER wrote:
> Should I try with another window-manager? I will also double-check that
> the other working buster MATE installation uses marco.
The bug is NOT present with compiz.
The bug IS NOT present on a fresh buster install with mar
On Mon, Aug 10, 2020 at 01:47:08PM +0200, to...@tuxteam.de wrote:
> Have you tried another "classic" X program? For example xmag or xeyes?
Yes, they fail miserably.
> xterm in a special way, or the decorations of all "classic" X programs
> fail in the same way.
I would guess that.
Should I try
On Sun, Aug 09, 2020 at 09:59:12AM +0200, to...@tuxteam.de wrote:
> To verify/falsify that, you might run xprop on your xterm window.
> The property you are looking for is called WM_NAME. You can even
xprop | grep WM_NAME
WM_NAME(STRING) = "schaefer@reliand: /home/schaefer"
> use xprop to /set/
On Sat, Aug 08, 2020 at 02:22:44PM -0700, Mike Kupfer wrote:
> I assume you're using the system xterm, not something in /usr/local or
> $HOME.
yes
schaefer@reliand:~$ which xterm
/usr/bin/xterm
(BTW was working nice before upgrade to buster)
> Could the problem be locale-related? I have
>
>
> > What about if you use another window-manager and/or desktop-environment?
>
> I haven't tried that yet.
I just tried twm and it says "Untitled" even with xterm -T abcd &
On Sat, Aug 08, 2020 at 08:25:39AM -0400, Stefan Monnier wrote:
> Does it affect other terminal emulators?
no, mate-terminal is not affected.
> Have you checked whether the problem also shows up for a freshly created
> user (i.e. without any config of your own)?
yes, it does.
> What about if
On Sat, Aug 08, 2020 at 09:47:56AM +, Long Wind wrote:
> have you looked at .bashrc?
Actually, I have sent the usual title escape sequence: it works in
mate-terminal,
but xterm's title remains blank.
Thomas Schmitt :
Also I tried the -T option, with no success.
Running MATE in marco
Hello,
I have a funny problem since I upgraded my laptop to buster: xterm does not
have any title.
It is the only window that has this problem. I did not see anything special in
the .Xresources.
Anyone having this issue ?
Thank you for pointers.
peut-être un rapport de bug.
> --
> Bernard.
> 25 ans d'utilisation de Debian. Comme le temps passe...
>
Jean-Marc
https://6jf.be/keys/ED863AD1.txt
https://6jf.be/keys/ED0B8558.txt
pgpduX96yFufH.pgp
Description: PGP signature
with pricing & more info.
Thank you and I look forward to hearing from you.
Regards,
Marc Daniels
Sr. Marketing Analyst
se, la page du wiki indique un lien pour transformer
ses règles iptables vers nftables.
Il existe aussi un outil en ligne de commande que je n'ai jamais utilisé qui
s'appelle iptables-translate.
Je rappelle que je ne suis pas un spécialiste.
Merci de vérifier ces infos et de ne pas les prendre pour arg
indique que l'utilisation de iptables pour de nouvelles install' est
découragé.
De plus, il existe un outil pour aider au passage à nftables :
https://wiki.nftables.org/wiki-nftables/index.php/Moving_from_iptables_to_nftables
Jean-Marc
https://6jf.be/keys/ED863AD1.txt
https://6jf.be/keys/ED0B8558.txt
pgpeVO6cHUt4D.pgp
Description: PGP signature
e plus complet a été repris depuis le wiki de Arch Linux :
https://wiki.archlinux.org/index.php/Nftables
> Bonne fin de journée
Bonne journée à toi aussi.
Jean-Marc
https://6jf.be/keys/ED863AD1.txt
https://6jf.be/keys/ED0B8558.txt
P.S. évite de répondre à un mail pour lancer une nouvelle dis
On 6/6/20 2:58 PM, to...@tuxteam.de wrote:
On Sat, Jun 06, 2020 at 02:06:42PM -0700, Marc Shapiro wrote:
I usually have three different distros installed. I was wondering
if I could have a separate partition (possibly in an extended
partition) containing /boot and /var/modules that would
duplicated for each distro, while allowing me to run lilo from
any of them. The only file that would need to be duplicated would be
/etc/lilo.conf, and it doesn't take much space. Is this a workable idea?
Marc
On 6/6/20 8:58 AM, Brad Rogers wrote:
On Sat, 6 Jun 2020 11:14:13 -0400
leonard morin wrote:
Hello leonard,
Line commented out by installer because it failed to verify:
Both instances of that should either be deleted or have an # inserted at
the start of the line. IMO, the former is
On 6/5/20 6:31 PM, Marc Shapiro wrote:
On 6/4/20 11:30 PM, Sven Hartge wrote:
Marc Shapiro wrote:
I also don't understand why it says that it could not create temporary
files in /tmp. I am running this as root and /tmp is owned by root.
What am I missing?
/tmp (and /var/tmp/) should have
On 6/4/20 11:30 PM, Sven Hartge wrote:
Marc Shapiro wrote:
I also don't understand why it says that it could not create temporary
files in /tmp. I am running this as root and /tmp is owned by root.
What am I missing?
/tmp (and /var/tmp/) should have the following permissions and rights
with this I would greatly appreciate it.
Marc
MACINTOSH -t utf-8 fichier.txt | tr -d "^U" > final.txt
(le ^U s'obtient en tappant ctrl-v ctrl-u)
hth
marc
, it has
never been more than 1 bounce. Nothing top worry about.
Marc
ckagés par Debian.
et quitte à choisir un langage dynamique en 2020, je te conseile
d'en apprendre un qui n'aie pas 25 de casseroles à trainer comme ces 3
là: http://raku.org. et si raku est un peu trop frais pour toi: si je
devais garder *un seul* langage dynamique des années 90, ce serait perl
évidement.
cordialement,
marc
on est dépendant du répertoire dans lequel
se trouve le mp4, il faut produire la liste des arguments de ffmpeg
avec find et les passer à xargs.
si j'ai compris correctement ton problème, ton script final est
find tmp/born/ -type f -printf '%f\0%h/image%%d.jpg\0' |
xargs -0 -n2 ffmpeg -i
a+
marc
cherché
> > avec le cron.
>
> J’essaierai avec un sleep ou quelque chose comme ça.
Sinon, voir si systemd.timer peut offrir une solution.
Si ton système utilise systemd.
> Merci,
> --
> Raphaël
> www.leclavierquibave.fr
Jean-Marc
https://6jf.be/keys/ED863AD1.txt
pgpajLGT111Ik.pgp
Description: PGP signature
201 - 300 of 6827 matches
Mail list logo