Question: If I set in my HT,
RPT1=myRepeater B
RPT2=myRepeater G
URCALL=/remoteGateway plus module A
I know that the local G2 will route my packets to remote G2 system,
remoteGateway Module A and change RPT1 and RPT2 accordingly before routing
the packets.
Will the local G2 manipulate the
I will post details on XRF008 as soon as I get them.
73,
The D_STAR_Open_Source
http://groups.yahoo.com/group/D_STAR_Open_Source/
Ooops...
We noticed after a day ot two, our Open G2 DSTAR Gateway
software gets out of SYNC with the ICOM repeater-controller
hardware and the hardware starts rejecting our packets.
We fixed that, by re-SYNChronizing with the hardware,
when our Open G2 gateway detects that condition.
Wow
It is so amazing, isn't it ?
73
--- In dstar_digital@yahoogroups.com, John Hays j...@... wrote:
Thanks for the update.
We have a Open G2 Gateway software that replaces the ICOM G2
and there is no cost to it.
It has been running now for a few weeks at various sites.
It runs on ICOM hardware(ICOM repeater controller,...)
and 2m, 70cm, 1.2 Ghz bands, DV modules C, B and A
Send me a private e-mail.
Jesus, $300
or spend $300 for software to talk to your
own hardware that you already spent money to get it.
73
The D_STAR_Open_Source group
http://groups.yahoo.com/group/D_STAR_Open_Source/
--- In dstar_digital@yahoogroups.com, ham44865 ham44...@... wrote:
We have an Open G2 Gateway software that replaces
04
00 00 00 00
These are also excellent response codes from the US TRUST.
73,
The D_STAR_Open_Source
http://groups.yahoo.com/group/D_STAR_Open_Source/
--- In dstar_digital@yahoogroups.com, ham44865 ham44...@... wrote:
Open G2 Gateway and linking is now OPEN SOURCE
at sourgeforge under
Same thing.
Once you load it, it becomes Open G2 DSTAR Gateway.
--- In dstar_digital@yahoogroups.com, John Hays j...@... wrote:
I am finding the Dextra software here, not the Open G2 gateway
replacement.
On Oct 4, 2009, at 10:11 PM, ham44865 wrote:
Open G2 Gateway and linking
There is a small piece of code, about 5% of the total
source code,
that 5% is binary ONLY, because we do not want the
owner to change it at all, because if it gets changed,
then the TRUST can get messed up and then
the whole Open G2 Gateway effort goes down the drain.
QSO?
73
No. The Open G2/linking is FREE Under GPL/Linux and the source code
plus instructions on how to build from source code
are posted at: SOURCEFORGE
http://dstardextra.sourceforge.net/
It cant get more OPEN than that.
What you are reporting is, that some people,
were hacking into that old web
Not much else is required.
So your RPT1 value will be: K1RFI C
and RPT2 will be, most of the time, : K1RFI G
73
Scott
--- In dstar_digital@yahoogroups.com, Radioman radioma...@... wrote:
Hello, Group!
Name is Tony NN1D,
and today i purchased all the parts for a D* 2 meter repeater
Most of the Open G2 has been released at
sourceforge: http://dstardextra.sourceforge.net/
under GPL
The rest of it is being installed at multiple sites
with either our RPTR/gmsk program that controls a
GMSK RF modem(adapter,node,...)
or all ICOM G2 software (dsgwd, dsipsvd) removed
and our
Around the country means around the USA?
Yes.
What international fair is that?
ICC or something, not sure of the exact name.
...that are part of the K5TIT trust server network?
Yes.
It is beautiful, the way it works.
Running tcpdump and watching how the ICOM controller
talks to our Open G2,
Open G2 Gateway and linking is now OPEN SOURCE
at sourgeforge under a GPL/Free License at:
http://dstardextra.sourceforge.net/
I am sure you can download the source C files.
About 310 downloads of the Open G2 software, so far.
If you can not, give me a holler.
I can also install it and
On Oct 3, 2009, at 5:36 AM, ham44865 wrote:
We finally did it folks.
We now have an Open G2 written in C that communicates
correctly with the ICOM repeater controller hardware.
The handshake protocol between the ICOM G2 and the
ICOM repeater controller hardware was a little tricky
The communication is between the ICOM repeater controller
hardware and the local Open G2.
We are not talking about TRUST servers,
as long as the TRUST server is ICOM, it is fine.
The point was to stop the local ICOM dsgwd
and have an Open G2 alternative talking to ICOM's hardware.
You see
, ham44865 ham44865@ wrote:
We finally did it folks.
Steps for running dsm on home-made G2 dstar gateways
with no ICOM hardware/software.
1)
Since you are not installing any ICOM hardware/software
you must create the following directories
so dsm can run properly
/opt/products/dstar/dstar_gw/dsgwd
/opt/products/dstar/dstar_gw/dsipsvd
Under folder
OK, uninstalled it.
I did not know a license was required.
Removed it now, DONE.
Where do one get a license.
Scott
--- In dstar_digital@yahoogroups.com, Peter Loveall p...@... wrote:
--- In dstar_digital@yahoogroups.com, ham44865 ham44865@ wrote:
Steps for running dsm on home-made G2
The dstar ADDON for dstar Gateways/repeaters updated to
version 2.45 to fix a small bug when
gateways transmit to the Reflectors and to other
gateways at the same time due to dstar routing.
OPEN SOURCE dstar is at:
http://dstardextra.sourceforge.net/
package is dextra_linux_v245.zip
73
Scott
...a dstar repeater/gwy local dstar database
takes 2 minutes to receive the IP repeater updates
and the radio user updates from the TRUST server.
My home-made G2 dstar repeater/gateway receives updates from
the TRUST two minutes after another repeater sent its
update to the TRUST.
Is that
. In some instances, up to 2 hours after requesting it.
What you are seeing is pretty quick - but I would expect that as you are on a
very small system.
David
--- In dstar_digital@yahoogroups.com, ham44865 ham44865@ wrote:
...a dstar repeater/gwy local dstar database
takes 2 minutes
Hi dlake2,
I am trying to post this but it gets lost.
I will try again
Thank you for the input.
All I know there are two EU TRUST servers.
A TEST and a LIVE one.
In your IOCM dsipsvd.conf configuration file,
a repeater owner sets the TRUST_SERVER variable
to the TRUST server hostname that
We did it, folks.
First contract from my home-made dstar G2 gateway to
an ICOM's dstar gateway/repeater.
dstar routing worked with URCALL=...the remote calllsign ...
This is amazing.
Now I have to automate the software to run as a Linux service.
I want to congratulate the EU TRUST server group
You are looking at an old piece of source code.
The new one access the gip.
And 2 Linux servcices,not 3.
I prefer the RECEIVING IP updates to be
in a different logic from the SENDING IP updates.
Glad you are looking at my source code, bu that is a very old
program.
Scott.
--- In
update:
Radio:[DB5ZQ ] Rptr:[DM0PX ] Mod:[B] RegistRptr:[DB0WZB ]
PC_IP:[] PC_Host:[db5zq]
Scott
--- In dstar_digital@yahoogroups.com, ham44865 ham44...@... wrote:
You are looking at an old piece of source code.
The new one access the gip.
Registrations for NEW dstar repeaters to an ICOM TRUST
do not have data like 10.x.x.x
I checked about 5 NEW repeater registrations to us trust
and 3 to European trusts.
No 10.x.x.x anywhere in any registration packet
for a NEW repeater.
Scott
--- In dstar_digital@yahoogroups.com, dlake02
I do not trust that number.
ICOM dstar TRUSTS(dsipsvd) use separators:
0x0a = RECORD separator.
0x09 = FIELD separator.
Since I do NOT trust that number, I use the RECORD separators and
get every RECORD in the FULL DB and every RECORD in
subsequent updates without doing computations on
NO, I meant the European TRUST at dstareusers.eu is
running as a TRUST server exactly as k5tit does
at dstarusers.org or something.
They have built a NEW TRUST server.
That is the point.
Now others will build more, as every country should have one.
That is the point.
I dont care which
It has changed 10 times since then. OLD stuff.
The one I am running now, it is flawless.
I will post another copy after I define it to run as a
Linux service.
Scott
--- In dstar_digital@yahoogroups.com, dlake02 dl...@... wrote:
Scott
This is the source downloaded today:
Send an e-mail to that group.
I am not the owner of that European TRUST.
They will explain it to you if you need more info.
They posted a message earlier.
All I know is they operate the ICOM TRUST.
Scott
--- In dstar_digital@yahoogroups.com, Bob McCormick W1QA ya...@... wrote:
Scott wrote:
That I agree with.
Scott
--- In dstar_digital@yahoogroups.com, Jay Maynard jmayn...@... wrote:
On Fri, Jul 24, 2009 at 09:24:42AM -, ham44865 wrote:
Registrations for NEW dstar repeaters to an ICOM TRUST
do not have data like 10.x.x.x
I checked about 5 NEW repeater registrations
Hi Eric,
I did NOT create anything myself.
I see other ICOM TRUST server groups popping up.
Scott
--- In dstar_digital@yahoogroups.com, Erik Finskas la...@... wrote:
Who are WE in this aspect? Why do you want to create numerous parallel
networks unvisible ro each other? You then fail
...@... wrote:
On Fri, Jul 24, 2009 at 03:59:28PM -, ham44865 wrote:
--- In dstar_digital@yahoogroups.com, dlake02 dlake@ wrote:
This is the source downloaded today:
dstar_gwy.zip i386 17.5 KiBSun Jul 19 2009 10:44
It has changed 10 times since then. OLD stuff
I see 2 of them, similar setup to the usroot...org something
xtrust3.dstarusers.eu
xtrust2.xreflector.net
I sent an e-mail and asked If I can register ny dstar
repeater KJ4NHF for testing first,
Once testing went OK, I moved to the LIVE ICOM TRUST
they administer and run
Scott
--- In
structure that you choose not to record the
start_ipaddr field.
As you have no knowledge of the 10.X.X.X/28 address, how do you add users to
the trust domain ?
David
--- In dstar_digital@yahoogroups.com, ham44865 ham44865@ wrote:
It has changed 10 times since then. OLD stuff
authorized, the IP address used is the one that the Trust Server picks
up from source IP of the poll.
Also, once registered, each module registers with a 10.X.X.X/28 address so
that DD traffic can reach it.
David
--- In dstar_digital@yahoogroups.com, ham44865 ham44865@ wrote
The EUROPEAN TRUST is OPEN SOURCE,not closed.
So,they are using ICOM repeaters and ICOM hardware
for dstar routing and normal/regular dstar radio communications
RF and such
but for linking to dstar reflectors
they are using the OPEN SOURCE dextra_srv for linking to dstar
reflectors powered by
I am going to release my G2 code and make it OPEN SOURCE at:
http://dstardextra.sourceforge.net/
You will also find there the OPEN SOURCE dextra_srv
which links dstar repeaters/gateways to dstar reflectors.
I can not use dplus on my gateway/repeater because
it is CLOSED source.
So I use the
I see 3 SYNC packets:
One SYNC packet with 10.x.x.x from my repeater to the TRUST.
--- TRUST responds witj OK= 0 0 0 40 0 0 0
--- One SYNC packet from TRUST to my repeater with 10.x.x.x
That is the IP update I sent before.
The third SYNC packet with PC-IP address and more
An ICOM gateway can run as an ICOM Gateway or it can become
an ICOM TRUST server itself, because dsipsvd is included
when you install the ICOM G2 software
and it is mostly dsipsvd that does all the work of the
TRUST server.
I believe we could write an OPEN SOURCE replacement
to dsipsvd since we
Not complaining Jay,it is an old source release he is reading.
Just the facts.
Scott
--- In dstar_digital@yahoogroups.com, Jay Maynard jmayn...@... wrote:
On Fri, Jul 24, 2009 at 08:17:27PM -, ham44865 wrote:
You are LOOKING at the OLD VERSION again.
The new one is NOT released yet
Your dstar repeater already has dsipsvd installed.
Follow the instructions and it becomes an ICOM TRUST server.
Scott
--- In dstar_digital@yahoogroups.com, aro_bugger aro_bug...@... wrote:
http://www.open-dstar.net/tiki-index.php?page=get+your+own+trust+server
Thanks Scotie!! Greatest
This is not my work Aro, the instructions on the web site
were created by the EU TRUST group at www.xreflector.net
They worked hard to test, prove and place a NEW ICOM TRUST
server in production.
They did something amazing.
Now more ICOM TRUST groups will pop up and I believe
we will have a
All my G2 home-brew dstar gateway source code is
OPEN SOURCE running on Linux only.
I did not buy anything, simply I do not have that kind of
money.
However the ICOM TRUST servers in Europe and those
ICOM dstar repeaters that are members of that EU ICOM TRUST,
yes, those are pure ICOM
I do not understand why you are hostile.
Scott
--- In dstar_digital@yahoogroups.com, Jay Maynard jmayn...@... wrote:
(Please don't top-post.)
On Fri, Jul 24, 2009 at 11:39:36PM -, ham44865 wrote:
--- In dstar_digital@yahoogroups.com, Jay Maynard jmaynard@ wrote:
On Fri, Jul 24, 2009
I am releasing as often as every week.
Cant do it faster. Comments are fine,
They dont bother me.
Scott
--- In dstar_digital@yahoogroups.com, Jay Maynard jmayn...@... wrote:
(Please don't top-post.)
On Sat, Jul 25, 2009 at 01:46:43AM -, ham44865 wrote:
--- In dstar_digital
that are kind enough to run it on behalf of
the whole Amateur community.
73 David - G4ULF
--- In dstar_digital@yahoogroups.com, ham44865 ham44865@ wrote:
It was accepted by FOUR(4) ICOM TRUST servers, so far.
Scott.
--- In dstar_digital@yahoogroups.com, john_ke5c ke5c@ wrote
Same here, I do not care much about:
Who's on first, What's on second, I Don't Know's on third.
It does not matter.
I will release the whole OPEN SOURCE code of my 3 server programs
at http://dstardextra.sourceforge.net/
My 3 server programs that make up the ICOM compatible
G2 Gateway will be:
too many already, IMHO.
73 David - G4ULF
--- In dstar_digital@yahoogroups.com, ham44865 ham44865@ wrote:
There are 4 European ICOM TRUST servers.
You would need permission with them to register your
home-made ICOM compatible G2 Gateway, same thing with the US.
I also have
We have not decided on the host name yet.
Details will follow in the next couple of weeks.
It will be open to testing and experimentation.
73
Scott/KI4LKF
This is for Linux only.
dstar routing from dstar repeater to dstar repeater.
dstar Postgres database updates and full communication with the
dstar TRUST server completed.
A few more tests will be done before the source code will
released as OPEN SOURCE dstar at
dstar_gwy_srv can be used on any DSTAR ICOM system,
Europe,US, Japan,...
It is idependent of any backbone,if there is such a word
backbone when it comes to dstar.
I believe you mean dstar TRUST groups, not backbone.
Scott
--- In dstar_digital@yahoogroups.com, aro_bugger aro_bug...@... wrote:
to the
closed source dsispvd. We will see.
Scott
--- In dstar_digital@yahoogroups.com, k7ve j...@... wrote:
--- In dstar_digital@yahoogroups.com, ham44865 ham44865@ wrote:
First, congratulations on the advances in your project! I have looked at and
built the code for your gateway from
http
54 matches
Mail list logo