Hi All,
The diagrams in the Main and Sub Receiver Antenna Routing section of
the of the Operators Manual are helpful. But, some confusion might
be avoided if the internal plug connections could be indicated in some way.
73,
Bob - N9SF
At 09:23 PM 1/20/2009, Don Wilhelm wrote:
Brian,
Whether
Pardon my density, but I can't figure out how to realize the function
depicted in figure 3 of the K3 Owner's Manual: routing a signal from the
ANT2 connector to the KRX3 through the KAT3. I don't see anything in the
FAQ. Can someone, please, tell me how to configure the rig so that K1 and K3
are
: [Elecraft] KRX3: configuration for second antenna routing
To: elecraft@mailman.qth.net
Date: Tuesday, January 20, 2009, 3:48 PM
Pardon my density, but I can't figure out how to realize
the function
depicted in figure 3 of the K3 Owner's Manual: routing
a signal from the
ANT2 connector to the KRX3
: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of WILLIS COOKE
Sent: Tuesday, January 20, 2009 7:07 PM
To: Brian Machesney; Elecraft Reflector
Subject: Re: [Elecraft] KRX3: configuration for second antenna routing
Brian, I am with you. I can connect to either
Brian,
Whether figure 3 is applicable to your K3 or nor depends on how you have
the subRX antenna connection physically connected.
If you have connected the subRX antenna to the Aux RF BNC connector, the
configuration shown in Figure 3 is not possible whthout changing the
antenna cable to the
Don,
Thanks for the help, but I'm still not with you. I want to operate in SO2V
mode with the main and sub receivers on different bands using different
antennas connected to the ANT1 and ANT2 connectors.
I have the TMP cable connected between the KAT3 and the KRX3 input. The TMP
cable from the
FOUND IT
In order for the KRX3 to get its input from the ANT2 connector, the KRX3
input must come from the KAT3 **AND** one must set the KRX3 to ANT2 using
the B_SET button.
Whew!!!
Brian K1LI
On Tue, Jan 20, 2009 at 10:46 PM, Brian Machesney nekvts...@gmail.comwrote:
Don,
Thanks for
Brian,
That is good news. Try a press of the RX ANT button too, that should
work if the sub is on.
73,
Don W3FPR
Brian Machesney wrote:
FOUND IT
In order for the KRX3 to get its input from the ANT2 connector, the
KRX3 input must come from the KAT3 **AND** one must set the KRX3 to
Brian Machesney wrote:
I have the TMP cable connected between the KAT3 and the KRX3 input.
The TMP cable from the Aux RF BNC connector is present but insulated,
per the manual instructions, so it is inactive.
I want the input to the KRX3 to come from the ANT2 connector. What I
need to
Don Wilhelm wrote:
To connect the subRX auxiliary input to the non-transmit KAT3 antenna,
the TMP cable from the KAT3 to the subRX antenna input must be in place
(instead of the TMP cable from the BNC).
Factory built K3s with the subRX installed have the BNC cable installed
and a separate TMP
10 matches
Mail list logo