Folks,
Thanks to all of you who have registered for QRPacificon. If you have not yet
registered for QRPacificon, 2009, please go to
http://www.alpinesoft.com/pacificon09/
The event is free but registration is required for attendance and for the door
prize drawings.
Note: there will be no
I've got a KX3 and a K3 - I want to share an antenna between the two radios. I
do this now by manually detaching the coax from one and connecting it to the
other. Are there any quality coax switches on the market that have adequate
isolation between ports that I could use for this purpose?
I've been a PSK31 user just about ever since the mode came to be. Not a heavy
user, but couple time a month I get on and have some nice keyboard QSO's. In
the 50 years that I've been licensed, I have NEVER made a RTTY QSO! However, it
does intrigue me so I started messing with it a little this
Selling a SLUSB external sound card along with the Tigertronics cable sets:
one for the K3 and and one for the KX3. Also included is the USB-2 cable to go
between the SLUSB and your rig. The SLUSB is currently internally jumpered for
connection to a K3. Re-jumpering for use with a KX3 takes
Peter,
I've been using my KX3 and NaP3 for several months, although not with Win4k3 -
love how I'm able to control the rig from this application in addition to doing
a point click to jump to signals I see on the band. However, on my
computer, NaP3 gets all bollixed up after I press my CW key,
The SLUSB and cable set is sold, pending fund clearance. Thanks for your
interest.
73, Jim / W6JHB
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
Well, yes that might have been an option, especially if the software were
something purchased and not a freebie. But, I did discuss it with Wayne via
email several months ago and he did say that it was something possible to do.
Not everyone necessarily wants audio sent out that pipe on
tent and abandoned the
product.
73,
... Joe, W4TV
On 2014-09-24 12:40 PM, James Bennett wrote:
Peter,
I've been using my KX3 and NaP3 for several months, although not with
Win4k3 - love how I'm able to control the rig from this application
in addition to doing a point click to jump
After reading K9YC's write-up on audio devices, I purchased a Tascam US-125M on
eBay for about $75. It works great - no jumpers to mess with, and in a nice,
shielded metal case.
Jim / W6JHB
On Wednesday, Oct 1, 2014, at Wednesday, 9:19 AM, Jim Brown
j...@audiosystemsgroup.com wrote:
On
I've got a KX3 that so far has only been used on CW or data, and have been
using fairly bulky Sony headphones with it. Those phones work fine, but aren't
exactly something I want to use in a portable / car camping environment.
Yesterday while at Fry's electronics I saw a lightweight headset
Guys (and ladies) -
I had asked about using an inexpensive headset with my KX3. Got a couple
replies off the list and wanted to share my results. I wound up purchasing an
AC-404 mic/headphone set at Amazon.com for the paltry sum of $15.40. The
package included a Y-adapter to break out the
I probably should have noted (maybe I did...?) that my purpose of the cheapie
headset was not necessarily for use in the shack, but to take with me on hikes,
car camping, back patio operating, etc. In these cases, super-comfort was not
the primary objective - operability and compactness were
A doublet. Center fed with either 600 ohm or 450 ohm ladder line, a 4:1 balun
close to your shack and as short a length of coax from the balun to your K3 as
possible. Using a tuner (either the K3 internal or an external), you will be
able to work 80 through 10 meters, and possibly six meters.
Fred is right about the 450-ohm stuff getting funky in wet weather. Cause my
tuners to do the clicky-click dance whenever it rains here, although we've been
pretty dry the past few years. Because of this, I plan on replacing my 450-ohm
line with 600-ohm ladder line in a couple weeks. I had the
Steve, you didn't say how long your antenna is, but I feed an 88-foot long
doublet with about 110 feet of 450 ohm ladder line. Sometimes I use the KAT3
tuner, sometimes my KAT500. Both of them have no problem getting close to 1:1
on 40-6 meters and about 1.6:1 on 80. In no instance does the K3
Another option for a tad more power is to roll you own. W6PQL had an article
in the May 2013 issue of QST for building an 80 watt out all mode 2 meter amp:
http://www.w6pql.com/2_meter_80w_all_mode_amplifier.htm
He has a ton of other home brew projects on his web site. I built that amp this
John,
Don's suggestion is for sure the way to go. My K3, KPA500, and KAT500 sit next
to each other on my desk. I run about ten feet of RG-8 to the outside where I
have my 4:1 balun, and then 110 feet of 450-ohm ladder line to my doublet at
the other end of my property.
Jim / W6JHB
Jim
Yes, LP bridge (LPB2) is a really cool tool for the Windows user. I use it on
Win 8.1 under VMware Fusion on an iMac. It allows me to run NAP3 and Log4OM at
the same time with my KX3. Be aware, however, that is is a Windows-only
program; there is no Mac or Linux version out there, as far as I
Need a little help on this one. I have an inexpensive mic/headset that has a
three connector plug (TRS). If I plug it into the Mic jack on the KX3, it works
fine, although I have to use VOX, which, having an 18 month old in the house,
is not a good choice! I've only made a few SSB QSO's (I'm
I sent this a few minutes ago from my iPad Air, and the posting email I got
back said “this message has no content” Huh? So I’m re-sending it again, this
time from my iMac. Sorry if it is double posted. This just isn’t my night…..
Need a little help on this one. I have an inexpensive
On Nov 12, 2014, at 6:15 PM, James Bennett w6...@me.com wrote:
Need a little help on this one. I have an inexpensive mic/headset that has a
three connector plug (TRS). If I plug it into the Mic jack on the KX3, it
works fine, although I have to use VOX, which, having an 18 month old
, at Wednesday, 6:35 PM, James Bennett
w6...@me.com wrote:
Thanks Wayne - you are correct - that XMIT button does it, although my
installation makes it cumbersome to use that method. I will look into the
ACC2 option in the morning. I do see that my KX3 has a “splitter” plugged
Ian - FWIW - I replaced my SLUSB several months ago with a TASCAM US-125M
external USB sound card. Got it on Amazon.com http://amazon.com/. Selling the
SLUSB on eBay paid for the TASCAM unit. I have it connected to my 27” iMac and
use it for PSK31, JT65, JT9, and an occasional RTTY QSO. No
Oooops - I meant K9YC, NOT K9AY!
My bad……
On Saturday, Nov 22, 2014, at Saturday, 9:52 AM, Jim Brown
j...@audiosystemsgroup.com wrote:
On Sat,11/22/2014 8:44 AM, Ian - Ham wrote:
So, my question is this - What else are people using as an external USB
sound card with their PCs and
I’ve been using cocoaModem on my iMac for PSK31 QSO’s. Also, I use WSJT-X for
JT65 and JT9. Recently downloaded FLDIGI v 3.22.01 and gave it a try. It works,
but…..
When I transmit, I get absolutely no indication of RF being sent. The K3 goes
into transmit mode, but I get no ALC action on the
rate is native and converter is medium interpolation.
and corrections all 0 and
third tab right channel all buttons are clear unchecked.
David Moes
VE3DVY, VE3SD
On 11/22/2014 17:15, James Bennett wrote:
I’ve been using cocoaModem on my iMac for PSK31 QSO’s. Also, I use WSJT-X
for JT65
will show four bars with the fifth flickering at a mic level of 7. It's very
touchy for me to get just right, but I am probably using sub-optimal sound
cards. Works fine, though, for all the digital modes.
John / W3DN
On 11/23/2014 4:34 PM, James Bennett wrote:
Hi david - thanks
Kind of a similar situation here in Folsom. Christmas activities and other
family “stuff” kept me away from the contest for all but a few hours. My goal,
using the K3 @ 5 watts along with my P3, was to search pounce for as many
different states as possible - I’m trying to get WAS QRP. A total
Forgive me if this has been discussed (and answered) before but I do not find
it in the archives. A while back there was a firmware update that would allow
the KAT500 to “automatically” select the memorized L/C values as the K3 was
tuned across a band. I have the current firmware in both units,
--
73, Howard Stephenson K6IA
Elecraft Customer Support
(831) 763-4211 EXT 169
Forwarded Message
Subject: [Elecraft] K3/KAT500 Synchronization
Date:Thu, 18 Dec 2014 10:17:21 -0800
From:James Bennett w6...@me.com mailto:w6...@me.com
Dennis -
Thanks for the post. I’ve had a K3 for about five years and have really liked
the feel/sound of it’s keying. Got a KX3 about a year ago and immediately
noticed that is just didn’t sound the same as big brother. Not bad, but just
not the same. I pretty much ignored it, as it wan’t
First, let me wish all a very Merry Christmas!
OK, now the problem. I have a KX3 and the full K-line: K3, P3, KPA500, and
KAT500. I have a two position coax switch that I use to drive the amp with
either the K3 or the KX3. When using the K3 (P3 powered off) all works
perfectly. I can change
- the two boys are finally asleep in their rooms!
Jim Bennett / W6JHB
Folsom, CA
On Dec 24, 2014, at 10:17 PM, Jack Brindle jackbrin...@me.com wrote:
The KPA500 is my work, so I’ll try to answer…
See discussion below.
On Dec 24, 2014, at 9:22 PM, James Bennett w6...@me.com wrote:
First, let me
, at 09:45, James Bennett w6...@me.com
mailto:w6...@me.com wrote:
Ian - FWIW - I replaced my SLUSB several months ago with a TASCAM US-125M
external USB sound card. Got it on Amazon.com http://amazon.com/
http://amazon.com/ http://amazon.com/. Selling the SLUSB on eBay paid
for the TASCAM
Rough night here - still trying to kick a cold - brain not working too well.
That was supposed to be HELP, not hemp, and Ian is KM4IK.
On Friday, Dec 26, 2014, at Friday, 7:21 PM, James Bennett w6...@me.com
wrote:
Arlen,
Can’t hemp you with anything to do with HRD/DM780, but I can
, but I'm wondering what the Config: LIN OUT setting is on your K3. I
have mine set to maximum (100), and on the Tascam the Line In is all the way
clockwise, and I'm still not getting enough signal.
73, Arlen - AA7f
On Dec 26, 2014, at 19:49, James Bennett w6...@me.com wrote:
Rough
Just wondering if any folks on this reflector have been using the Raspberry Pi
(RPI) computer with their rigs or any other ham-related stuff?
I got one for my Jr op (6 yrs old) several months ago and he has only used it
occasionally. I'd like to integrate it into my ham shack where it might get
Just to put in my two centavos - I used three of the Concorde SunXtender 108ah
batteriesin parallel in my shack running my K3 station and accessories (via a
72-watt solar panel) for almost nine years. Been told that's a pretty good life
expectancy for them.
Jim Bennett / W6JHB
Folsom, CA
On
Josh,
I am not aware of a way to do it natively on OS X. However, I have OS X 10.10
and run VMWare Fusion. Under Fusion I am running Windows 8.1 and my KX3 is
connected there. I use a serial port manager (free) called LP Bridge (LPB2).
With LPB2 in place, I simultaneously run NaP3 (Pan Display
I just “tested” the durability of the yellow paint on my KX3 # 5539. Pushed
pretty hard with the edge of my fingernail and no way was that paint coming
off. Bad paint job somehow slipped through. Elecraft will most certainly make
good on it.
Jim / W6JHB
On Tuesday, Feb 17, 2015, at
Hi Mark,
I have used MLDX with my KX3 in the past and it worked very well. I also have a
K3/P3/KAT500/KPA500 that I use MLDX with.
However, I got spoiled by that dang P3 and wanted something like it for the
KX3! This was before Elecraft announced the PX3. So, I downloaded and installed
a copy
Hi folks,
Looking for some help identifying the USB—Serial adapter names on Windows 8.1.
Here’s the situation: I have a KX3 and a K3. Each has it’s own USB—Serial
adapter from Elecraft. These USB guys plug into my iMac. I run the K3 on the
Mac side of the machine, and the KX3 under VMWare
: Elecraft [mailto:elecraft-boun...@mailman.qth.net
mailto:elecraft-boun...@mailman.qth.net] On Behalf Of James Bennett
Sent: Wednesday, January 28, 2015 8:32 PM
To: Elecraft Reflector Reflector
Subject: [Elecraft] K3 USB--Serial Names OT, Kinda
Hi folks,
Looking for some help identifying the USB
no idea about Fusion, it may work differently.
73, Mike NF4L
On Jan 28, 2015, at 11:31 PM, James Bennett w6...@me.com
mailto:w6...@me.com wrote:
Hi folks,
Looking for some help identifying the USB—Serial adapter names on Windows
8.1. Here’s the situation: I have a KX3 and a K3. Each has
Hi all,
Have a K3/P3/KPA500/KAT500 and have been working 160 meters more the past year
or so than in the previous 49 years. Only need three more states for WAS. Got a
lot of noise here at this QTH, and have limited antenna space. Using an
Inverted L up about 40 feet with a K2AV FCP under it.
What is your K3 showing as the voltage when you change the DISP to read that
instead of VFO-B frequency? Low voltage would cause the current to increase to
keep the power where you set it.
On Sunday, Jan 11, 2015, at Sunday, 10:30 AM, alan geller via Elecraft
elecraft@mailman.qth.net
Mr. Inventor61 (call??) - I’ve been running my K3 (full K-Line here, too) with
WSJT-X v1.3, r3673 for quite some time with no problems. WSJT-X is able to
control the rig’s band setting and I also use the split feature with no issues.
I’d be glad to compare settings with you if you’d like. It
Hi Jim -
Another suggestion: Sint Maarten. The island is Dutch on the south half; French
on the north. My XYL and I stayed on the Dutch side in 2001. Actually, we were
there during the 9/11 attacks, but that’s another story. St. Maarten has
reciprocal licensing, so that’s one problem solved
, K6KR
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of James
Bennett
Sent: Sunday, March 08, 2015 10:42 AM
To: Elecraft Reflector Reflector
Subject: [Elecraft] KX3 utility Question
Have a question about the KX3 utility. I recently
Have a question about the KX3 utility. I recently upgraded my antenna system
feedline, going from 450 ohm line to 600. Afterwards, I cleared the KX3
internal tuner’s memories and then re-trained it on every band at the proper
segments.
Now I want to use the KX3 in a portable operation with a
:
On 5/6/2015 10:23 PM, James Bennett wrote:
...
I diagrammed it on paper and came up with another idea. What “should” work
is to have a coax switch that completely takes the FEP out of the circuit,
basically a “ganged” coax switch, for lack of a better term. When set to one
position
.
Thanks much
Dan NB1C
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of James
Bennett
Sent: Thursday, June 04, 2015 12:33 PM
To: Elecraft Reflector Reflector
Subject: [Elecraft] OT: Ferrite Identification Question
A bit off-thread
I've got a K3/KAT500/KPA500 system, along with a KX3.
In the past I was able to power on the KAT500 whenever I wanted, irregardless
of the power being on or off for the K3. This was useful for the occasional
times I wanted to have the KX3 drive the KPA500 and the KAT500. A week or so
ago I
A bit off-thread, but sorta related, as these things ARE used for antennas with
my K3/KX3!! I have a bunch of ferrites - donuts, clamp-ons, beads, etc. that
I’m trying to identify the mix. With the guidance of Tom/W8JI I’ve figured out
how to use my AIM-4170C analyzer to show at what frequency
Case closed!
Begin forwarded message:
Subject: Re: [Elecraft] KAT500 Utility Question: Idle Sleep
From: James Bennett w6...@me.com
Date: Tuesday, June 9, 2015 at 1:37:06 PM PDT
Cc: Elecraft Reflector Reflector elecraft@mailman.qth.net
To: Dick Dievendorff d...@elecraft.com
Hi Dick
Jack - I get that message if I have my straight key depressed upon power up.
Check your key / paddle connections
jim / W6JHB
On Monday, Jun 22, 2015, at Monday, 1:42 PM, Jack West
w7l...@embarqmail.com wrote:
First problem with my K3 in five years. I have no MENU or CONFIG
:37, James Bennett wrote:
Have a KX3 and PX3 that have been working fine - until this morning. Today I
am unable to have the KX3 connect to my computer if the PX3 is powered on.
If I turn off the PX3, the KX3 serial - USB connections works fine. As soon
as the PX3 is powered
Have a KX3 and PX3 that have been working fine - until this morning. Today I am
unable to have the KX3 connect to my computer if the PX3 is powered on. If I
turn off the PX3, the KX3 serial - USB connections works fine. As soon as the
PX3 is powered on, the connection goes away. I'm using
get anything through to the KX3 with the PX3 switched ON
while that problem exists.
Very frustrating I can understand.
73
David Anderson GM4JJJ
On 25 Jun 2015, at 22:45, James Bennett w6...@me.com wrote:
Tried it. In fact, not only did I try the one that connects to my K3/P3, I
See below -
On Thursday, Jun 25, 2015, at Thursday, 1:57 PM, Mike Reublin NF4L
n...@comcast.net wrote:
Jim -
I have a K3 and P3, and am assuming that the cabling is the same for the Xs,
cable from computer to PX3, then from PX3 to KX3. Are you using a Mac? If you
use a VM, does
was not at 38,400 things went brain
dead just that way.
Jack - KD4IZ
On 6/25/2015 12:37, James Bennett wrote:
Have a KX3 and PX3 that have been working fine - until this morning.
Today I am unable to have the KX3 connect to my computer if the PX3 is
powered on. If I turn off the PX3, the KX3
, James Bennett wrote:
Have a KX3 and PX3 that have been working fine - until this morning.
Today I am unable to have the KX3 connect to my computer if the PX3
is powered on. If I turn off the PX3, the KX3 serial - USB
connections works fine. As soon as the PX3 is powered on, the
connection goes
Nope - this is my only machine. Got several iPads, but that won't help!! :-) :-)
On Thursday, Jun 25, 2015, at Thursday, 2:16 PM, Tom Schaefer
t...@xmission.com wrote:
Can you try a different computer?
Principal Solutions Architect
Better Software Solutions, Inc.
727-437-2771
My guess would be for a CW contest station. Kind of a PITA to keep moving hand
from keyer paddle to keyboard. Of course, if one could type with one hand and
do CW with the other, that would be great. But I can't, so having a logger op
would help the QSO rate.
On Jul 3, 2015, at 7:52 PM,
I posted this on the WSJT-X Yahoo group and still no resolution. Hoping that
perhaps someone on this reflector might have some thoughts on the problem. It
isn’t a real “problem” per se, as I can certainly use my system as it is, but
just wondering about this “quirk”. Here is my post:
I just
to squash. When I reported
rig control issues with the K3 with a WSJT-X Beta, they thanked me, and
several months later it seems to work.
73, Jim K9YC
On Sun,7/5/2015 9:18 PM, James Bennett wrote:
Nobody??? Am I the only K3 owner using a Tascam sound card and a Mac to run
WSJT-X
,
... Joe, W4TV
On 2015-07-06 5:30 PM, James Bennett wrote:
This is looking more like a WSJT-X problem. I set my MIDI control to 48000
and fired up cocoaModem. Was able to easily send a 1kHz test tone and then
send CQ. Going back to WSJT-X failed miserably. No amount of fiddling
Nobody??? Am I the only K3 owner using a Tascam sound card and a Mac to run
WSJT-X??
Jim Bennett / W6JHB
Folsom, CA
On Jul 4, 2015, at 12:30 PM, James Bennett w6...@me.com wrote:
I posted this on the WSJT-X Yahoo group and still no resolution. Hoping that
perhaps someone on this reflector
Peter,
Another option might be for you to try the Array Solutions product: AS-FEP.
This is a small device that is placed between the receive antenna and the rig.
It protects the radio’s front end by electronically switching (and very fast)
the receive antenna out if it senses too much RF
I second Jim’s recommendation. I’ve been using a 12 aH AGM lead acid battery
for about two years. It weighs a tad over 10 pounds. I purchased a 12 aH LiFePO
battery from Bioennopower a couple weeks ago. Wow - what a difference! This one
weighs about three pounds, and seems to last forever. I’ve
Vic, mostly it depends on where the item(s) are being sent to. I’ve been
selling on eBay for over 12 years, and I DO ship overseas. However, when it
comes to something really expensive, I opt not to do that for certain
countries. There are parts of the world that have a very, very bad
Wondering how many ops on this reflector had a KX3 station running this past
weekend in Field Day? I had mine running five watts, along with a PX3, set up
on our back patio. Ran a LiFePO4 battery and solar panel, along with a
half-sized G5RV in inverted Vee mode, apex up 25 feet.
Conditions
Dieter - if you go by what Fred has documented in his book, it will work
superbly. I use my K3 AND KX3 with a KPA500 and KAT500 - I’ve got a two
position coax switch that allows me to use whichever radio I want to drive the
amp and tuner.
I followed the info (and diagrams) in Fred’s book and
Don is correct - the free Windows program LP Bridge (or LPB2) is what you want
to try. I ran ONE serial-to-USB cable out of my KX3 into LPB2. I then assigned
one virtual serial port to NaP3 and another to LOG4OM, a Windows based free
logging program. Each application thought it had its own
Bill,
I use that AS-RXFEP device and am 100% satisfied with it. I have run 550 watts
from my K-line system, through 110 feet of 600-ohm ladder line feeder to an 88
foot long doublet at 45 feet. My diversity receive antenna is a ground mounted
Hustler 5BTV (with radials) that is only 25 feet
Gary - are you sure you have enough audio drive coming from the SLUSB? Also - I
had a similar issue with my K3 and an external sound card - a Tascam US-125M.
My USB audio MIDI setting was at 48,000 Hz, 16 bit, like the manual said to
have it at. However, I could not get transmitted RF. When I
Ed,
I've been using a Morningstar Prostar PS15M for several years, connected
between my G.E. 72 watt solar panel and a bank of AGM batteries in the shack.
The batteries run my K3, KX3, and KAT500, in addition to a 12v desk lamp. I
have zero RFI from this device.
Jim Bennett / W6JHB
Folsom,
Kevin - thanks for the early checkin on 40 meter CW tonight. When I checked in
this afternoon on 20 I was using my K3 and KPA500 at about 450 watts. Tonight
on 40 I fired up the ion-smasher: a SoftRock Ensemble RXTX, running a whopping
1 watt into an 88 foot long doublet at 45 feet.
73, Jim /
with the K3 on, the K3 needs to be on the same band as the
> KX3 to prevent band switching conflicts between the two transceivers.
>
> Thanks again and need to do that one test to add ground.
>
> 73,
> Hoop
> K9QJS
>
>
>
> On Nov 2, 2015, at 8:50 , James Be
David,
My K2 is long gone, but I can tell you about my experience with the DSP module.
I operate mainly CW, and added the DSP option after having the K2 for over a
year. For me, it was a mistake. The radio didn't sound as good as it did before
adding it. I wound up taking it out and selling
Hoop -
Something must not be cabled properly. I have the same setup - K3, KX3 on a
coax switch going to the KPA500 and KAT500. I can operate either K3 or KX3 with
or without the amp/tuner. If my K3 is powered off and I want to use the KPA500
with the KX3, there is no issue - I can press the
Ted - been there! I de-kink mine before placing them on the board.
Jim Bennett / W6JHB
Folsom, CA
> On Oct 15, 2015, at 3:42 PM, Dauer, Edward wrote:
>
> If you¹ll forgive what to the experienced will be a silly question . . .
>
> Building a K2. Some of the capacitors
Yes, you will find in the archives that this is a "normal" occurrence with the
KPA500 - it IS heat/cooling related and is nothing to worry about.
Jim Bennett / W6JHB
Folsom, CA
> On Oct 20, 2015, at 6:55 PM, Michael Cozzi wrote:
>
>
>I am experiencing the same issue.
Not on Win 10, but I used LPB2 under Win 8.1 for quite some time. Worked fine.
Jim Bennett / W6JHB
Folsom, CA
> On Oct 11, 2015, at 3:31 PM, Byron Peebles wrote:
>
> Is anyone running LP-Bridge under Windows 10?
> The site looks like development stopped early in Windows 8.
>
>
in and week the K3 VOX Gain and Line In Gain menu settings,
however.
73,
Bob Nobis - N7RJN
n7...@nobis.net mailto:n7...@nobis.net
On Jul 6, 2015, at 13:18, James Bennett w6...@me.com mailto:w6...@me.com
wrote:
Nobody??? Am I the only K3 owner using a Tascam sound card and a Mac
, Byron Peebles n...@arrl.net wrote:
Great insights. Thanks.
Do you use a keyboard for sending CW with this?
73, Byron NZ3o/qr..p
On 07/10/2015 10:27 AM, James Bennett wrote:
Byron,
I also migrated from the Windows environment - nine years ago. Never did
computer logging until I
Byron,
I also migrated from the Windows environment - nine years ago. Never did
computer logging until I got my iMac. I tried MacloggerDX and really like it.
Mind you, I don't do rotor control nor do I have anything to do with clusters.
I operate HF CW and occasionally SSB. I do like the way
I’m another happy ASUS user. I’ve got the VN247, 23” model; VGA and two HDMI
ports. One HDMI goes to my iMac and the other runs over to a Raspberry Pi micro
processor. I like having dual monitors on the Mac, as it allows me the real
estate to have WSJT-X, JT Bridge, and MacLoggerDX all up and
Inferring that those of who have stated that we prefer the K3 over the 756
ProIII to be dunces is uncalled for and not very professional. Interestingly,
the person who posted this is one of the VERY FEW who have preferred the Icom.
I for one, do NOT regret it for a second.
>
> … maybe they
are missing pics of your setup :)
>
> -Original Message-
> From: James Bennett [mailto:w6...@me.com]
> Sent: Monday, September 14, 2015 3:50 PM
> To: ae...@carolinaheli.com
> Cc: Elecraft Reflector Reflector
> Subject: Re: [Elecraft] K3 / K3S Station setup question
Jerry,
I’m also a righty and built part of my desk / operating setup. Mine is a little
different, as I have a 27” iMac - sitting off to the left. But here’s what my
setup is like:
- A 54” wide, 24” deep double pedestal desk with a solid core 80” wide x 32”
deep door sitting on top. This gives
A bit off-thread, but sort of related - wondering if folks on this reflector
have any experience with USB oscilloscopes. I'm considering adding an o'scope
to my test bench, and came across an Australian company called Bitscope.com.
They have several models and appear quite affordable. The nice
:41 PM, Nr4c <n...@widomaker.com> wrote:
>
> Do you want scope for audio or RF? What bandwidth does the item have and is
> it enough?
>
>
> Sent from my iPhone
> ...nr4c. bill
>
>
>> On Sep 29, 2015, at 5:31 PM, James Bennett <w6...@me.com> wro
Jeff -
I sold a Pro III (and my little old K2) back in 2010 in order to help pay for
my K3. I am not one bit sorry I did that! I started out with a K3/100 kit,
internal ATU and two additional filters: the 400 Hz 8 pole and the 1.8 KHz 8
pole filter. I loved it in this rather “bare”
Yep - that W6PQL 80 watt, all mode, 2 meter amp works great! I built one last
year from scratch - even fabricated the case/chassis myself. First time I’d
ever done any sheet metal work and surprisingly came out pretty darn well. The
amp works just fine, driven by my K3.
Jim / W6JHB
> On
I built that W6PQL 80 watt amp last year. Built the aluminum chassis, too. I
did not have a sheet metal brake, but a few minutes on Google turned up quite a
few home-brew brake plans. I built one of them and used it to form the chassis
for my amp, and later on a couple other small boxes for
With summer coming to a close, are you thinking about climbing up your tower or
a pole to do some antenna work before the fall and winter weather hits? I'm
selling my Vintage Buckingham linesman belt, model number 3570. I have it up on
eBay right now as a fixed price listing, number
Has anyone on the list successfully connected a KX3 to a Raspberry Pi and been
able to get rig control working? If so, what software application did you use
and did you have to do anything "funky" to make it work?
I am trying to get WSPR and my KX3 talking but something isn't working, as I
Test - please ignore. I had a message rejected a while ago that should have
gone through…..
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
; was tough. FLDigi was a snap. But, what is in the RPi repos will likely be
>> good enough for most.
>>
>> Google is your best friend when it comes to debugging issues you may find on
>> the RPi. Lots of other Hams have come before you and asked the same
>> questi
1 - 100 of 340 matches
Mail list logo