Hi guys,
I have a semi OT question about packet filter firewalls.
Up till now, I have used linux IPCHAINS and IPTABLES firewalls were one was
required, and never had a problem...
I just got hold of a DLINK DSL504 and set it up with a mixture of NAT and
portforwarding.. all of which went fine.
Jack, still don't see any posts by me, so forward it to the list if it
may help others.
I will try un- and re-subscribing to expert... :-/
On Sun, 2003-05-25 at 18:35, Jack Coates wrote:
thanks for the tip, found the area and started a) watching what happens
while I use the Evolution account
I'd ask d-link, but IIRC some of these commercial products are set up so
that they won't portforward to a NAT'd address, or will only portforward
to a single NAT, or won't portforward at all but instead make you put
the server on a DMZ cable, which is naked to the world. Idea being to
make you buy
On Wed, 2003-05-28 at 08:33, Patrick Mayer wrote:
Good day everyone,
After getting my hand on the new version of Winex 3, I have observed that it
is much slower than it's predecessor, especially when run on Mandrake 9.1.
On remedy to this is not to use the pre-built RPM and compile from
Hey,
Sorry for the OT, but I just received an email for a product called
'soundpix' which allows you to embed sound in a standard jpeg. I thought
that sounded cool, but I don't want to buy the software and then realize
all I had to do was download a gimp plugin or something else that simple.
Any
On Wed, 2003-05-28 at 07:35, Frankie wrote:
Hi guys,
I have a semi OT question about packet filter firewalls.
Up till now, I have used linux IPCHAINS and IPTABLES firewalls were one was
required, and never had a problem...
I just got hold of a DLINK DSL504 and set it up with a mixture
Hello
Recently my mplayer installation began acting strangely. It starts in
fullscreen mode no matter what settings I give it and the control
interface opens only on desktop 2. The control interface only displays
partially and is unusable.
Mandrake 9.0
KDE 3.01
mplayer 0.90-10plf
hello again :)
a) its connected to a motherboard connector
b) not a problem, harddisk is detected by cmos
c) settings are correct (been messing with computers all my life ;)
the entry in lilo.conf was like this:
append=devfs=mount hdc=ide-scsi hdd=ide-scsi acpi=off quiet
i removed this
can anyone tell me how i can change the mouse sensitivity?
maybe i'm blind but i can't find any such option in MouseDrake...
tnx greetings,
le stu
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
On Wednesday 28 May 2003 07:39 pm, elPunishar wrote:
can anyone tell me how i can change the mouse sensitivity?
maybe i'm blind but i can't find any such option in MouseDrake...
tnx greetings,
le stu
Have you checked the settings in:
KDE Control Center - Peripherals - Mouse
with tabs for
sorry, i forgot to say, i'm running mandrake 9.1.
where would i find the KDE control center ? you don't mean the mandrake
control center ?
On Wednesday 28 May 2003 15:43, Ronald J. Hall wrote:
On Wednesday 28 May 2003 07:39 pm, elPunishar wrote:
can anyone tell me how i can change the mouse
Mr James Sparenberg did say:
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of James Sparenberg
On Wed, 2003-05-28 at 07:35, Frankie wrote:
Hi guys,
I have a semi OT question about packet filter firewalls.
Up till now, I have used linux IPCHAINS and IPTABLES firewalls were one
How do I manipulate grsec? I've set up Mozilla's Bonsai system which
requires the cvs server to execute a perl script on every check in, but it
fails because grsec says I'm not a trusted user.
--chris
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Yes...he meant Mandrake control center.
Also (no insults, not sure how much u r into linux)
but, with winblows, cable select works OK for multiple
drives. For linux, Gotta specify explicitly which is
master, which is slave with the jumpers.
Coming to think of it, i tried adding a third
Peeps,
There have been an alarming number of system freezes here recently, and
I guess I'm not so much looking for a solution as I am for other LM91
users that have been experiencing similar things.
There have been other system lockups, but I viewed them as anomalies at
the time, and did not
I'm trying to find something that's more sophisticated than the log
search tool in Drakconf. Does anyone have ideas about a decent and well
performing log analyzer. Maybe even something that may already be in
the distro or packaged on Mandrakeclub...basically something that
someone has had good
i have no
- pheripherals - mouse
in control center. i only have
- hardware - MouseDrake
and there are absolutely no options for the mouse... the only thing i can
chose is WHAT mouse.
concerning the harddisk, i don't know if i tried the harddisk alone.. think i
did, but i'll try that again to
No- he really did mean:
KDE Control Center - Peripherals - Mouse
That's where the settings you need are are- not in Mandrake Control Center.
Robert C.
On Wednesday 28 May 2003 17:16, elPunishar wrote:
i have no
- pheripherals - mouse
in control center. i only have
- hardware - MouseDrake
Hello all,
I'm trying to set up a generic postscript printer via the KDE print system
and CUPS. To do this, I go into the KDE control center, select peripherals
and then printers. After getting into administrator mode, I'm allowed to add
a printer.
Everything goes great until I get to the point
okay, and where do i find KDE control center ?
On Wednesday 28 May 2003 21:42, Robert Crawford wrote:
No- he really did mean:
KDE Control Center - Peripherals - Mouse
That's where the settings you need are are- not in Mandrake Control Center.
Robert C.
On Wednesday 28 May 2003 17:16,
On Wed, 2003-05-28 at 23:16, elPunishar wrote:
i have no
- pheripherals - mouse
in control center. i only have
- hardware - MouseDrake
Just use xset then. It has the advantage of working out of kde too.
--
Fred.
Linux, {Free,Open}BSD mercenary {sys,net}admin @ N48º53.115 E02º19.31
Hi,
I've come across something that I haven't seen before, but my RPM binary
doesn't seem to work. If I try to install or upgrade any RPMs, it just
sits and doesn't do anything.
rpm -qa, rpm --help, and rpm --version work, but that's it. I tried rpm
--list to see if the last rpm installed might
On Wednesday 28 May 2003 22:07, Lyvim Xaphir wrote:
Peeps,
There have been an alarming number of system freezes here recently, and
I guess I'm not so much looking for a solution as I am for other LM91
users that have been experiencing similar things.
There have been other system lockups,
Kstart menuConfigurationcontrol center (NOT Mandrake Control Center).
HTH,
Jason
elPunishar wrote:
okay, and where do i find KDE control center ?
On Wednesday 28 May 2003 21:42, Robert Crawford wrote:
No- he really did mean:
KDE Control Center - Peripherals - Mouse
That's where the
Hi
This seems to be a very proprietary format. Supposely they have plans
for support for multiple desktop platforms. But I doubt they ever will
support linux.
They have a plugin for IE. To create files for the soundpix format you
have to buy the software, that is obvious.
Can not see that
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Monday 28 July 2003 04:39 pm, Rick Salsa wrote:
Hi,
I've come across something that I haven't seen before, but my RPM binary
doesn't seem to work. If I try to install or upgrade any RPMs, it just
sits and doesn't do anything.
rpm -qa, rpm
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of Praedor Atrebates
Sent: May 28, 2003 4:58 PM
To: [EMAIL PROTECTED]
Subject: Re: [expert] RPM binary doesn't seem to be working
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Doing the Ctrl-C often leads to
horray, tnx! :)
On Wednesday 28 May 2003 22:49, Jason wrote:
Kstart menuConfigurationcontrol center (NOT Mandrake Control Center).
HTH,
Jason
elPunishar wrote:
okay, and where do i find KDE control center ?
On Wednesday 28 May 2003 21:42, Robert Crawford wrote:
No- he really did mean:
On Wed, 2003-05-28 at 13:13, Lyvim Xaphir wrote:
I'm trying to find something that's more sophisticated than the log
search tool in Drakconf. Does anyone have ideas about a decent and well
performing log analyzer. Maybe even something that may already be in
the distro or packaged on
Rick Salsa wrote:
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of Praedor Atrebates
Sent: May 28, 2003 4:58 PM
To: [EMAIL PROTECTED]
Subject: Re: [expert] RPM binary doesn't seem to be working
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Doing the Ctrl-C
On Wednesday 28 May 2003 10:43 pm, H.J.Bathoorn wrote:
On Wednesday 28 May 2003 22:07, Lyvim Xaphir wrote:
Peeps,
There have been an alarming number of system freezes here recently, and
I guess I'm not so much looking for a solution as I am for other LM91
users that have been
I am installing 9.1 on an existing system, similar issues encountered on
the 8.2 installation (weren't these resolved yet?).
Anyway the mdkkdm installation issue I get, and reconfigured it for kde.
My problems are:
1. Installer did NOT recognize the S3 Video Controller (is this a BAD
Video
On September 1993 plus 3556 days Albert E. Whale wrote:
I am installing 9.1 on an existing system, similar issues encountered on
the 8.2 installation (weren't these resolved yet?).
Anyway the mdkkdm installation issue I get, and reconfigured it for kde.
My problems are:
1. Installer did
On Wednesday 28 May 2003 03:16 pm, elPunishar wrote:
i have no
- pheripherals - mouse
in control center. i only have
- hardware - MouseDrake
and there are absolutely no options for the mouse... the only thing i can
chose is WHAT mouse.
concerning the harddisk, i don't know if i tried the
For all:
If you're a kde fan, the best way is to drag (as user) the kcontrol icon in
/usr/bin to the panel creating an instant one click shortcut, and then you
have an instant access to the entire kde control center window, where it's
all available to do anything you want in kde
I had a tail -f going on my syslog, and I noticed an entry which said:
kernel: i8253 too high! Resetting
(not 100% sure of the number, but it was close to that)
That was the final entry on the screen. Everything else had stopped. Even
my main console wouldn't respond when I moved the mouse
Hi,
I installed my copy of win4lin 3 on mdk 9.1 and though everything works
fine, I can't seem to be able to use the Windows Update through ie.
Has anyone encountered this situation before?
I'm hoping that I won't have to upgrade to version 5, for the little
that I need Windows for, I'd rather
I have found LM91 rock solid, and I have installed it on quite a number
of different types of PCs, about the only things I dislike with Mandrake
9.1 is the way it runs depmod -a on every bootup and the Zeroconf
stuff, both very easy to fix.. About the Zeroconf stuff it was causing
3 second
Vox wrote:
On September 1993 plus 3556 days Albert E. Whale wrote:
I am installing 9.1 on an existing system, similar issues encountered on
the 8.2 installation (weren't these resolved yet?).
Anyway the mdkkdm installation issue I get, and reconfigured it for kde.
My problems are:
1.
Thanks Rolf!! That was it!!
/rick
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
On September 1993 plus 3556 days Albert E. Whale wrote:
Vox wrote:
On September 1993 plus 3556 days Albert E. Whale wrote:
I am installing 9.1 on an existing system, similar issues encountered on
the 8.2 installation (weren't these resolved yet?).
Anyway the mdkkdm installation issue I get,
3. The Installer indicates that it will get the latest updates, why
the heck is this not working yet?
It's a matter of mirrors, I think, not really of the installer not
working.
Yeah, updating during installation has not worked for me on 9.1, but it
works fine thru the software update
On Wed, 28 May 2003 09:59 pm, elPunishar wrote, and deciphered as being:
okay, and where do i find KDE control center ?
The big K in the panel, then Configuration, then Control Panel.
--
The real voyage of discovery consists not in seeking new landscapes, but in
having new eyes.
Marcel
** charlie (Donnerstag, 29. Mai 2003 12:54)
On Wed, 28 May 2003 09:59 pm, elPunishar wrote:
okay, and where do i find KDE control center ?
The big K in the panel, then Configuration, then Control Panel.
In case you haven't realized yet: KDE doesn't have a Control Panel
anymore.
Open the
In case you haven't realized yet: KDE doesn't have a Control Panel
anymore.
It does on 9.1
kcontrol at the command line if you cant find it.
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
On Wed, 2003-05-28 at 13:07, elPunishar wrote:
sorry, i forgot to say, i'm running mandrake 9.1.
where would i find the KDE control center ? you don't mean the mandrake
control center ?
They hid it ... it's right above the Mandrake Control Center on the menu
and just says control center...
On Wed, 2003-05-28 at 12:26, Tru64 User wrote:
Yes...he meant Mandrake control center.
Not really it is in the kde control center.
Also (no insults, not sure how much u r into linux)
but, with winblows, cable select works OK for multiple
drives. For linux, Gotta specify explicitly
On Wed, 2003-05-28 at 22:30, eric huff wrote:
In case you haven't realized yet: KDE doesn't have a Control Panel
anymore.
It does on 9.1
kcontrol at the command line if you cant find it.
They hid it wobo, but I swear it is there. (in English anyway.)
Just curious in the menu
On Wed, 2003-05-28 at 12:06, Frankie wrote:
Mr James Sparenberg did say:
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of James Sparenberg
On Wed, 2003-05-28 at 07:35, Frankie wrote:
Hi guys,
I have a semi OT question about packet filter firewalls.
Up till now, I
On Wed, 2003-05-28 at 14:49, Torstein Dybdahl wrote:
Hi
This seems to be a very proprietary format. Supposely they have plans
for support for multiple desktop platforms. But I doubt they ever will
support linux.
They have a plugin for IE. To create files for the soundpix format you
have
On Wed, 2003-05-28 at 21:18, Vox wrote:
On September 1993 plus 3556 days Albert E. Whale wrote:
Vox wrote:
On September 1993 plus 3556 days Albert E. Whale wrote:
I am installing 9.1 on an existing system, similar issues encountered on
the 8.2 installation (weren't these resolved
On Wed, 2003-05-28 at 17:43, David Guntner wrote:
I had a tail -f going on my syslog, and I noticed an entry which said:
kernel: i8253 too high! Resetting
(not 100% sure of the number, but it was close to that)
That was the final entry on the screen. Everything else had stopped. Even
Could someone either help me to get spamassassin working with kmail or direct
me to somewhere where I can find some direction?
Thanks,
--
Jonathan Dlouhy
Thursday, May 29, 2003 04:15 AM
Don't get even -- get odd!
On Thursday 29 May 2003 7:58 am, James Sparenberg wrote:
On Wed, 2003-05-28 at 22:30, eric huff wrote:
In case you haven't realized yet: KDE doesn't have a Control
Panel anymore.
It does on 9.1
kcontrol at the command line if you cant find it.
They hid it wobo, but I swear it
On Thursday 29 May 2003 H:49 am, Anne Wilson wrote:
On Thursday 29 May 2003 7:58 am, James Sparenberg wrote:
On Wed, 2003-05-28 at 22:30, eric huff wrote:
In case you haven't realized yet: KDE doesn't have a Control
Panel anymore.
It does on 9.1
kcontrol at the command
I have a 17 monitor that does 1280x768 just fine in windoze, but I
haven't had any luck figuring out how to change XF86Config-4 to get
Linux to do it using the same ET6x00 video card. Can someone please
point me to how to figure this out?
--
I place economy among the first and most important of
On Mon, 2003-05-26 at 19:24, Robert Crawford wrote:
I've been struggling with Texstar's 3.1.2 for a week, and have
Umm.. i've been trying to get 3.1.2 for about four days now.. Is it just
me/my connection/location or is ibiblio SEVERELY busy?
i'm getting speeds ranging from 0.8 KB/s to
29 2003 13:39 Damian Gatabria :
Umm.. i've been trying to get 3.1.2 for about four days now.. Is it just
me/my connection/location or is ibiblio SEVERELY busy?
i'm getting speeds ranging from 0.8 KB/s to an impressive and amazing
5 KB/s...
haven't you ever been on 14k4 dialup, have you?
On Wednesday May 28 2003 09:05 pm, Mark Williamson wrote:
Now the Zeroconf stuff, and the freezes are usually caused by a
program tmdns, just run the command rpm -e tmdns after you have
completed this process, just check your /etc/hosts file and the
/etc/resolv.conf file making sure that the
James Sparenberg grabbed a keyboard and wrote:
On Wed, 2003-05-28 at 17:43, David Guntner wrote:
kernel: i8253 too high! Resetting
(not 100% sure of the number, but it was close to that)
That was the final entry on the screen. Everything else had stopped. Even
my main
If your windows is 98, forget it, I think M$ is not supporting it anymore.
On 28 May 2003, Gerard Godin wrote:
Hi,
I installed my copy of win4lin 3 on mdk 9.1 and though everything works
fine, I can't seem to be able to use the Windows Update through ie.
Has anyone encountered this
On Thursday 29 May 2003 08:20 am, Alan Wilter Sousa da Silva wrote:
If your windows is 98, forget it, I think M$ is not supporting it anymore.
I have 98SE and I thought they were supporting it through June anyway.
That's okay for me. I only use it for a few apps so I don't have to reboot to
62 matches
Mail list logo