it...)
And they will have the following patches applied:
- vesa framebuffer fix for graphic cards with 64MB RAM
- updated aic7xxx / added aic79xx scsi support
- xfs filesystem with acl
- nforce2 ide udma/133
Best Regards
Thomas Backlund
Want to buy your Pack or Services from MandrakeSoft?
Go to http
)
NEW: 'memtest' boot option (runs memtest86 v.3.0 from CD)
better explanations and info at the site mentioned above
--
Regards
Thomas Backlund
http://www.iki.fi/tmb/
[EMAIL PROTECTED]
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
just provide the
standard kernel precompiled. If you need any other,
grab the src.rpm and rebuild the ones you need...
And all this is found at:
http://www.iki.fi/tmb/9.1/18mdk/
--
Thomas Backlund
[EMAIL PROTECTED]
www.iki.fi/tmb
Want to buy your Pack or Services from MandrakeSoft?
Go
Juan is working on it, but
since all MDK specific stuff also needs to be adapted to it,
it will take some time (not to mention all the supported arches...)
Best Regards
Thomas Backlund
www.iki.fi/tmb
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
it that way?
(keep your DVD and CDRW on the secondary controller)
Best Regards
Thomas Backlund
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
*.
Since rpmdrake/urpmi knows that kernels have to be installed,
not upgraded, it works as it should...
--
Thomas Backlund
[EMAIL PROTECTED]
www.iki.fi/tmb
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
acl/attr xfs* packages, etc..)
And at what point does your system lockup...
any info you can give... (you know the drill... ;-) ...)
I would like to try an reproduce the bug if I can...
--
Regards
Thomas Backlund
[EMAIL PROTECTED]
http://www.iki.fi/tmb/
Want to buy your Pack or Services
From: Adrian Golumbovici [EMAIL PROTECTED]
kernel 2.6 would have been cool. at least as a side choice even a
2.5.xx
would have been ok as a side choice when installing. :)
AFAIK there could be a 2.5.xx (or 2.6.x), since Juan is working on it...
As for 2.5 changing to 2.6, the estimated
machine completely freezes and I have to push the reset button. So, is
there another solution?
TIA,
Thomas Backlund has made some fixes for 9.1, one of which seems to
pertain to your issue:
http://www.netikka.net/tmb/9.1/
He says only ATA 100 is enabled in this and I don't have this hardware
From: Greg Meyer [EMAIL PROTECTED]
I asked this question on newbie, and I got no answer, so I'll repost
here.
Is anybody wiling to enlighten me as to what sshd-restarter does, and why
it
runs every 5 minutes?
--
If you combine the name with the interval it runs at,
it should not be to hard
From: Joerg Mertin [EMAIL PROTECTED]
Hi Martin,
Martin Fahrendorf wrote:
[...]
I think there is no easy sollution. Try to run both servers parallel
and you
can copy every mail from one server to the other.
Yeah - tried that already. I have about 35 Folders and I didn't find a
Client
From: Praedor Atrebates [EMAIL PROTECTED]
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
I lost the email that mentioned how to get 2.4.21-0.18 to build (fails at
xconfig). What file needs to be edited to fix this?
praedor
This fixes the network config.in bug:
From: Robert Crawford [EMAIL PROTECTED]
Janet,
You might be able to find a new patch for one of the latest 2.4.xx
kernels- I
did google searchs for E7205 linux support Asus P4G8X kernel
patch
and came up with some good leads- below are 2 typical excerpts from one
of
the google results.
that the only system I've built with mdk 9.1 on which the debugger works
is
the one that uses ext3. The other 3 use xfs!
Why not simply get a GNU or Redhat kernel?
Better to get it fixed in MDK kernel ;-)
I'll put it on my TODO list...
Regards
Thomas Backlund
[EMAIL PROTECTED]
Want to buy
(nforce) fixes
- aic7xxx_20030502
- driver_sonypi_1.19
- firewire update to 925
- vesafb ram fix
- fix a panic of ide-scsi
- add acls on xfs filesystems
- patch for devfs deadlock
- unlock grsecurity settings
Special thanks to Andrey Borzenkov and Thomas Backlund for many of the
patches
Viestissä Tiistai 8. Heinäkuuta 2003 22:50, Frederic Soulier kirjoitti:
Hi
Well I do not think it's a pbm with the network cards because I have 2
boxes with LM9.1 and 1 box with LM9.0 using the same type of card and
they all show the same pbm. Also these Dell 4100 workstation come
From: Phil [EMAIL PROTECTED]
Hello All,
After playing with Ksensors tonight I'm now wondering what the threshold
temperatures for the CPU and Mother board should be.
I have an AMD XP2000+ CPU which is currently running at 60 degrees C while
the
Mother Board temperature is 24 degrees C. I
From: Joerg Mertin [EMAIL PROTECTED]
Hehe :)
Got a Hush-PC on my Desk, M1 with nemiah Core. Actual Processing
tempoerature: 57 C :)
Didn't manage to get the lm_sensors stuff working on my Asus A7N8X Delux
board - so can't tell you what I'll see on my AMD box.
As for nForce2 lm_sensors
From: Frederic Soulier [EMAIL PROTECTED]
Ok solved.
Replacing the tulip driver by the dmfe driver did the trick. No more
RX errors, no more errors at all.
in /etc/modules.conf
replaced
alias eth0 tulip
with
alias eth0 dmfe
/Fred
Nice to hear...
Now can you send
Viestissä Perjantai 18. Heinäkuuta 2003 13:08, Huw Blackwell kirjoitti:
Has anybody else tried to recompile the new Mandrake 9.1 kernel. I
am trying
to apply the win4lin patches and recompile it for Athlon and make
xconfig is
dumping out with:
rm -f include/asm
( cd include ; ln -sf
From: Dean S. Messing [EMAIL PROTECTED]
Experts,
We have purchased a new Sharp Actius RD-10 laptop
and are seeing the (infamous)
error ldm_validate_partition_table() : read disk failed
bug during boot and at other times. We've read
the bug reports at
From: Robert Crawford [EMAIL PROTECTED]
[...]
I think this is what James is thinking of:
At this site is posted the new init stuff for 2.5 kernels that might work
for
2.6pres. This isn't for supermount as the name implies, but you can get
the
supermount patch for 2.4's and I believe some
From: Joerg Mertin [EMAIL PROTECTED]
Hi Folks,
just tried to use freeswan - to connect the 2 computers through the Wifi
Network I have over here. However - without forcing an Insmode - I can't
get
the ipsec module to load. The funny thing though is that I did compile the
kernel myself - and
Viestissä Sunnuntai 27 Heinäkuu 2003 22:54, James Sparenberg kirjoitti:
On Sun, 2003-07-27 at 08:19, Glenn Burkhardt wrote:
On Saturday 26 July 2003 09:57 pm, John Haywood wrote:
On Wed, 16 Jul 2003 07:21 pm, Michael Adams wrote:
Ensure you are not using the '8139too' driver. Its a
Viestissä Maanantai 28 Heinäkuu 2003 23:30, Ryan Hanlon kirjoitti:
Here's the /etc/security/msec directory:
-rwxr-xr-x1 root root0 Jul 10 11:47 security.conf*
lrwxrwxrwx1 root root 27 Jul 10 11:05 server -
/etc/security/msec/server.4 -rw-r--r--1 root
From: Richard Bown [EMAIL PROTECTED]
[...]
[EMAIL PROTECTED] samba]# smbpasswd richard
New SMB password:
Retype new SMB password:
getsmbfilepwent: malformed password entry (no terminating :)
Failed to find entry for user richard.
Failed to modify password entry for user richard
ideas
Viestissä Keskiviikko 30 Heinäkuu 2003 23:23, Eric Fesler kirjoitti:
Hi,
I just installed Mandrake 9.1 on a Dell Inspiron 9.1 and I've got
several issues:
I'm using the kernel linux-2.4.21-0.13mdkenterprise
1°) The harddisk is really slow : hdparm shows a transfer rate of
3.5Mb/s
I
From: Steffen Barszus [EMAIL PROTECTED]
Am Donnerstag, 31. Juli 2003 13:22 schrieb stefmit:
Is it just me, or is this site ($subject) having big problems?!? Cannnot
reach it for the second day in a row ...
Hmmm ... same with archives.mandrakelinux.com?!? Could it be me, from
three
Viestissä Sunnuntai 03 Elokuu 2003 19:11, Joseph Loo kirjoitti:
The problem is that the smp is tacked on the end under uname -r. It will
not recognize it because of that.
[...]
Just go to your kernel source tree (/usr/src/linux)
and do:
#make mrproper
#cp arch/i386/defconfig-smp .config
#make
From: Mark Watts [EMAIL PROTECTED]
Can anyone tell me if Mandrake kernels have this or normal FreeS/WAN
patched
into them (I'm particularly interested in the NAT traversal and Aggressive
mode stuff).
Atleast current Cooker kernel is using SuperFreeS/WAN,
If IRC it got included sometime after
Viestissä Lauantai 16 Elokuu 2003 02:26, Todd Lyons kirjoitti:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
[EMAIL PROTECTED] wanted us to know:
i tried 'urpmi binutils-devel' but it cant find it ans says 'no package
named binutils-devel'... i couldnt get it from the installation CD cause
From: Olaf Marzocchi [EMAIL PROTECTED]
Which patch should I add to the linus kernel to have a bootsplash?
Thanks
Olaf
http://www.bootsplash.org/
Thomas
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
From: Mark [EMAIL PROTECTED]
Wow.. Thanks for the info Byron, looks like it may be difficult to
install and make the sata drive as the bootable drive.. Although I am
not sure about this.. are you using the SATA dive as your main drive?
The information about these drives is awfully
From: David Rankin [EMAIL PROTECTED]
For what it's worth, here is more info than needed on smb and CIFS.
http://ubiqx.org/cifs/index.html#Contents
Just an update for you all...
upcoming MDK 9.2 has cifs support in both kernel and
Samba 2.2.x / 3.x ...
Thomas
Want to buy your Pack
From: lorne [EMAIL PROTECTED]
On Tuesday 02 September 2003 12:13 pm, Thomas Backlund wrote:
From: David Rankin [EMAIL PROTECTED]
For what it's worth, here is more info than needed on smb and CIFS.
http://ubiqx.org/cifs/index.html#Contents
Just an update for you all
From: Anne Wilson [EMAIL PROTECTED]
On Saturday 06 Sep 2003 12:51 pm, Greg Meyer wrote:
Hi folks. This is just a general information post about our wiki
situation. There seems to be a lot of discussion on this list about
the Community Wiki. It seems the membership of this list has really
From: Dick Gevers [EMAIL PROTECTED]
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi,
On Fri, 05 Sep 2003 14:58:08 -0600, Charlie M. [EMAIL PROTECTED]
wrote about [expert] RC1; mount points are _what?_ (bit wordy, sorry):
Another weird thing; lmsensors have decided to suddenly
From: Charlie M. [EMAIL PROTECTED]
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
September 6, 2003 06:39 am, Thomas Backlund wrote:
Well the CookerHowTo does tell you exacty what it is, so the fact at
it makes some people terrified is _intentional_
So if you intend to run Cooker
J.C. Woods kirjoitti viestissään (lähetysaika Maanantai 8. Syyskuuta 2003
21:24):
And, yes, I do hope you are willing.
Does anyone know what kernel version will be included with the final
release of LMDK9.2? I am still waiting for AGP version 3.0 kernel
support (AGPGART for 8X cards), and I
Brant Fitzsimmons kirjoitti viestissään (lähetysaika Maanantai 8. Syyskuuta
2003 22:04):
[...]
I believe that when you run the Mandrake Update (to which I think you
were referring) it only uses the media labeled updates. If there are
no updates available on that specific source you will get
From: Gary Montalbine [EMAIL PROTECTED]
I downloaded 9.2rc2 ISO's into a directory. Downloaded the file
9.2rc2.md5sums.asc
into the same directory. Tried to do a md5sum --status. Didn't work. Tried
md5sum --check. Didn't work. md5sum with each rc2 CD gives me a
letter/number combination.
Norman Zhang kirjoitti viestissään (lähetysaika Tiistai 16 Syyskuu 2003
00:43):
Hi,
I've searched the cooker and expert archives. But I couldn't find any
conclusive answer rather 9.2 kernel includes XFS and ACL support. I believe
ACL support was removed from the initial 9.1 kernel. Would
James Sparenberg wrote:
On Tue, 2003-09-16 at 20:39, Vincent Chen wrote:
Hi, all
My old VIA mainboard was gone weeks ago and I bought a
nforce2 board to replace it. I got a lot of situation
with this new board:
1. usb mouse won't work during mandrake 9.0
installation event I set it to
Tango Echo kirjoitti viestissään (lähetysaika Keskiviikko 17 Syyskuu 2003
16:39):
That is another problem. I found out about it from
other
distribution's security announcements then I checked
MandrakeSecure and
found that they posted the information there. They
should send an
Vincent Danen kirjoitti viestissään (lähetysaika Keskiviikko 17 Syyskuu 2003
22:07):
On Wed Sep 17, 2003 at 01:52:09PM -0500, Avi Schwartz wrote:
Advisories go out in many forms; I can't help it if you don't pay
attention
to one of the many:
- [EMAIL PROTECTED]
- [EMAIL PROTECTED]
Peter Møller Neergaard kirjoitti viestissään (lähetysaika Perjantai 19 Syyskuu
2003 20:02):
I am running Mandrake on laptop. Unfortunately my APM suspend is not
flawless so occasionally my laptop powers off when I try to suspend.
Obviously this results in unsynchronized file systems and a
Peter Møller Neergaard kirjoitti viestissään (lähetysaika Perjantai 19 Syyskuu
2003 23:17):
Thanks for the responses.
On Fri, Sep 19, 2003 at 02:05:36PM -0400, Bryan Phinney wrote:
AFAIK, support for Ext3 and ReiserFS, both journaling file systems are
built into the Mandrake kernel, either
James Sparenberg kirjoitti viestissn (lhetysaika Sunnuntai 21 Syyskuu 2003
23:06):
On Sun, 2003-09-21 at 09:23, Jack Coates wrote:
alright, installed it on my laptop.
[...]
5) Getting the bad key error on RPM upgrades, I thought Mandrake's key
was included in the gnupg package?
From: L.V.Gandhi [EMAIL PROTECTED]
I have two hard disks 20 gb seagate and 40 gb samsung. I see in BIOS they
are
100 ATA. However when I use hdparm, i get follwing results.
[EMAIL PROTECTED] lvgandhi]# hdparm /dev/hda
/dev/hda:
multcount= 16 (on)
IO_support = 1 (32-bit)
unmaskirq
From: HaywireMac [EMAIL PROTECTED]
On Thu, 25 Sep 2003 10:24:00 -0700 (PDT)
Terje Heen [EMAIL PROTECTED] uttered:
Hi there.
After installing mandrake 9.1 and reboot Mandrake reports cant locate
fb0 and there are alot of activity on my HD but nothing happends.
Have tryed with another
From: L.V.Gandhi [EMAIL PROTECTED]
On Thursday 25 Sep 2003 9:08 pm, Thomas Backlund wrote:
From: L.V.Gandhi [EMAIL PROTECTED]
I have two hard disks 20 gb seagate and 40 gb samsung. I see in BIOS
they
are
100 ATA. However when I use hdparm, i get follwing results.
[EMAIL
From: Miark [EMAIL PROTECTED]
On Fri, 26 Sep 2003 12:58:46 -0500, Vox [EMAIL PROTECTED] wrote:
[Samba 3.0's] in contrib, been there for a while, thanks to
Buchan...unfortunately, they took too much time to get it out, and
it didn't make it into 9.2 main...but it'll be there for
From: Felix Miata [EMAIL PROTECTED]
[EMAIL PROTECTED] wrote:
Felix Miata wrote:
Why is this file size 148180K, when all other files in /proc are size
0?
I'm in runlevel 3 no less.
kcore is not a real file but is an image of your memory. Do an 'ls -lh
/proc/kcore' and it should
From: Charlie M. [EMAIL PROTECTED]
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
October 4, 2003 07:10 am, J. Kelley Jernigan wrote:
Has anyone had any success getting the Audigy 2 sound card to work on
MDK 9.1?
I have one in a new Dell 8300 and it doesn't work at all.
I have Goggled
From: J. Kelley Jernigan [EMAIL PROTECTED]
OK,
Here it is:
[EMAIL PROTECTED] kelley]$ lspcidrake -v
[...]
audigy : Creative Labs|EMU10K2 Audigy Audio Processor
[MULTIMEDIA_AUDIO] (vendor:1102 device:0004 subv:1102 subd:1003)
ohci1394: Creative Labs|EMU10K2 Audigy IEEE1394
L.V.Gandhi kirjoitti viestissään (lähetysaika Sunnuntai 05 Lokakuu 2003
17:10):
[...]
Further in mdk I have problem of harddisk not getting udma5 as default in
hdparm -i /dev/hdx with this A7N8X MB and mdk9.1. but it shows in knoppix
3.2. Can you share your experience of your harddisk with
From: Seak, Teng-Fong [EMAIL PROTECTED]
SATA hard drives are hitting the markets already. Normally the Bios
should be able to emulate the same behaviour as if they're simple ATAPI
devices, but who can be so sure? Is Linux ready for it? Anyone who has
got a SATA HD is welcomed to talk
From: Tibor Pittich [EMAIL PROTECTED]
On 5. October 2003 at 14:48, James Sparenberg wrote:
Do you know of a list of chipsets that are correctly supported? I've
not been able to find one. yet.
in latest kernel from mandrake we can see support for these sata
controlers:
PDC20318
Wolfgang Bornath kirjoitti viestissään (lähetysaika Maanantai 06 Lokakuu 2003
20:35):
diego schrieb am 06 Oct 2003 19:02:06 +0200:
Hu... and if that's the case (a module is corrupted), you can have
a look at badmem:
it will lock bytes reported as wrong by memtest86 so you would
From: T. Ribbrock [EMAIL PROTECTED]
On Mon, Oct 06, 2003 at 07:38:15AM -0700, Jack Coates wrote:
On Mon, 2003-10-06 at 01:55, T. Ribbrock wrote:
...
[0] on archives.mandrakelinux.com, I get Can not connect to search
daemon - are there other archives?
Google, and add
From: [EMAIL PROTECTED]
How possible is it to upgrade a 9.0 system by pointing urpmi to 9.1
sources? I attempted to do this, and urpmi found about 250MBs of things
to download, but then failed on further dependencies when it tried to
install.
If you have a clean 9.0 system it should work
From: Wolfgang Bornath [EMAIL PROTECTED]
Thomas Backlund schrieb am Thu, 9 Oct 2003 23:51:07 +0300:
- the last thing you need is to update the kernel:
# urpmi kernel
Are you sure about this? I remember something about NOT using urpmi for
the kernel. But maybe that's an old rule
From: Mike Carter [EMAIL PROTECTED]
Are any of you guys/gals willing to offer a tip or two on getting it to
work?
Or do you recommend I go to the newbie list? I get errors trying to
install around line 100 of the script. I posted this a few days ago. If
there was a response I missed it and
...
... and more vill follow in the next couple of days...
it should show up on the contribs mirrors soon,
but for those of you that can't wait...
go to www.iki.fi/tmb/Cooker and grab it there...
and let me know how it works for you...
%changelog
* Sun Oct 12 2003 Thomas Backlund ([EMAIL PROTECTED
Hezekiah M. Carty kirjoitti viestissn (lhetysaika Maanantai 13 Lokakuu 2003
18:22):
Thanks for the tip! I'll go try this out right away...I've been having
constant stability problems with Mandrake and my new asus k7n8x deluxe
nforce2 board. Hopefully this will help.
Do you have any
Kwan Lowe kirjoitti viestissään (lähetysaika Tiistai 14 Lokakuu 2003 17:23):
I would like to get opinions from those possesing linux compatible
notebooks
without any driver problem. Further I would like to ask those possessing
intel centrino based notebooks their usability in linux for
Tibor Pittich kirjoitti viestissn (lhetysaika Maanantai 13 Lokakuu 2003
23:14):
On 13. October 2003 at 13:34, Thomas Backlund wrote:
all of you with an nVidia nForce2 or Via KT400 board..
please try this one out...
%changelog
* Sun Oct 12 2003 Thomas Backlund ([EMAIL PROTECTED
Bob [EMAIL PROTECTED] kirjoitti viestissään (lähetysaika Keskiviikko 15 Lokakuu 2003
00:38):
Hello,
I'm trying to load Mandrake on a brand new P4 2.8ghz system using the Intel
D845GVAD2, with two 10K ROM SATA drives. I have an IDE CDROM drive
attached.
What SATA controller?
That board
Bob [EMAIL PROTECTED] kirjoitti viestissään (lähetysaika Keskiviikko 15 Lokakuu 2003
20:16):
Bob [EMAIL PROTECTED] kirjoitti viestissään (lähetysaika Keskiviikko 15 Lokakuu
2003
00:38):
Hello,
I'm trying to load Mandrake on a brand new P4 2.8ghz system using the
Intel D845GVAD2,
ed tharp kirjoitti viestissn (lhetysaika Torstai 16 Lokakuu 2003 13:17):
disk 3 download is 652 megs
Then you have a bad image:
[EMAIL PROTECTED] download]$ du -m *
652 MandrakeLinux-9.2-17-Download-1.i586.iso
699 MandrakeLinux-9.2-18-Download-2.i586.iso
696
Bob [EMAIL PROTECTED] kirjoitti viestissään (lähetysaika Torstai 16 Lokakuu 2003
17:30):
Please let me know when you do build the disk (and drivers) for this. My
Will do ... I'll post on the lists when they are out...
machine is basically unusable until this happens. I don't understand how
Praedor Atrebates kirjoitti viestissään (lähetysaika Torstai 16 Lokakuu 2003
19:41):
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Err, in following this thread my first thought is: isn't not supplying the
kernel source technically a violation of GPL? The HAVE to supply the
source and
From: Praedor Atrebates [EMAIL PROTECTED]
A bit more information and I am no longer prepared to be T'd off when I
get my
CDs. I see that the bare-bones, 3CD iso download addition is what is
missing
the kernel source, not what I ordered (nor what anyone paid for). Given
this, it is still not
From: Olaf Marzocchi [EMAIL PROTECTED]
At 20.35 16/10/2003, you wrote:
The reason for dropping kernel-source, was AFAIK to make room for all the
kde-i18n, koffice-i18n stuff... as you know mdk supports *many*
languages...
i18n and similar were in other MDK distro... so they added something
From: Turgut Kalfaoglu [EMAIL PROTECTED]
Hello James; indeed it's Supermount that I meant, sorry about that.
I am now using 2.6.0test7-bk8. I tried the supermount enable command
but it did not seem to do anything. Thanks! -turgut
That's no MDK kernel...
so you have to patch the kernel
From: D. R. Evans [EMAIL PROTECTED]
Hmmm... I just discovered that I can't get a terminal -- since there's no
terminal on the menu either!
And opening one using ctrl-alt-Fn doesn't work, because then I can't run
X -
- - so I can't run a graphical program.
Doc
So when you are at the
From: James Sparenberg [EMAIL PROTECTED]
On Sat, 2003-10-18 at 08:41, Thomas Backlund wrote:
From: D. R. Evans [EMAIL PROTECTED]
Hmmm... I just discovered that I can't get a terminal -- since there's
no
terminal on the menu either!
And opening one using ctrl-alt-Fn doesn't work
From: Joeb [EMAIL PROTECTED]
Charlie M. wrote:
[...]
Have you run gendistrib yet? I believe that's used to clean the trees
before
building ISOs but I could be wrong. I'm sure there are notes about it on
the
TWiki (cooker).
gendistrib if for prepairing the tree for hd / network installs...
From: Praedor Atrebates [EMAIL PROTECTED]
I have been trying to get kismet, the wlan sniffer, to work with my orinoco
gold. There are patches available for the orinoco driver that allows it to
go into monitor mode. The thing is, all the sources indicate that the
default driver version in the
From: James Sparenberg [EMAIL PROTECTED]
In a sense it's already there. When the first Lilo screen comes up hit
the escape key and type linux 3 this will boot linux to runlevel 3
(text only) and then you can make the adjustments via good old vi. Not
sure exactly on Grub what to do...
From: lorne [EMAIL PROTECTED]
Say, I seem to remember awhile back that Mandrake has removed old Pentium
support? I have an old ALR 4 processor 200MHZ pentium Pro. It locks up
just
as it is trying to load the drives for the Mylex DAC960 Controller card.
The support is not removed...
we still
From: Praedor Atrebates [EMAIL PROTECTED]
Yeah, OK...but then, MandrakeClub happily sends you to the download page
for
src.rpms and includes (useless) urpmi instructions for each link.
In any case, I then tried looking for kernel-source-tmb in MandrakeClub and
found reference to it in Mandrake
Mark Williamson kirjoitti viestissn (lhetysaika Torstai 30 Lokakuu 2003
00:22):
Hi,
I have found the correct link..
http://archives.linuxfromscratch.org/mail-archives/hints/2002-August/001207
.html
Super I will be trying that out later, it's about time that Linux had
packet writing, I can
From: Oscar Retana [EMAIL PROTECTED]
Hi. Thank you Robert for your answer.
I need to apply a patch to the kernel. I don't want to use my own
configuration. Instead, I want to use the mandrake kernel configuraion
(as it is shipped in the CDs), apply the patch, and compile it.
Of course,
From: Richard Bown [EMAIL PROTECTED]
On Sat, 2003-11-01 at 23:17, Greg Meyer wrote:
Unless I am missing something that you have not brought up, the errors
you are
describing generally refer to the IDE controller itself and not the hard
drive. I/O APIC and ACPI problems generally cause
From: Trey Sizemore [EMAIL PROTECTED]
I've noticed that Cooker contains KDE 3.1.4, Mozilla 1.4, Evolution
1.4.4 and other packages that have newer versions. Is there a timeframe
for when these will be updated. Just curious.
No.
It's just that Cooker is now fully open again, and the
From: Carroll Grigsby [EMAIL PROTECTED]
Charlie:
My bad. Sorry about sending you on a wild goose chase. I made the mistake
of
not realizing when Mandrake says, Mandrake 9.2 is now available for
download, they really mean that Mandrake 9.2 is available for download to
Club members only. MOF,
From: Piero Piutti [EMAIL PROTECTED]
Alle 07:41, venerdì 14 novembre 2003, Thomas Backlund ha scritto:
But now that's changed too...
Last night the 9.2 ISO's appeared on the master mirrors, so they should
start showing up on the mirrors around the world...
But it's not clear
From: Lawson, Jim [EMAIL PROTECTED]
Every time I start shore wall squid and everything is denied can
anyone help me setting these up.
I think Jack said to manually do this yesterday I get the same problem.
Add a new firewall rule
Action Source Destination Protocol Source ports Destination
From: Lawson, Jim [EMAIL PROTECTED]
This was the default except for 1000 and 3128. It doesn't work anyway that
is why I am asking.
1 us webmin. I hate running to the server to manage it.
What I would like is to have everything bound to eth0 and deny all but ssh
to eth1.
then you
From: Lawson, Jim [EMAIL PROTECTED]
I did what you put here and on mandrake 9.2 via the ssh and vi I copied
and
pasted what you had typed and after I started shore wall it disconnected
webmin and ssh via the local net.
Question:
are you sure that eth0 is your lan, and eth1 is your internet
From: Lawson, Jim [EMAIL PROTECTED]
The server has 2 eth ports eth1 and eth2 eth 1 is eth0 and eth 2 is eth 1.
eth1 = eth0 is inside and eth2 = eth1 is outside just checked. also
I did cut and pasted yours into the rules.
so add eth0 to /etc/shorewall/routestopped
and remove the line that
From: Lawson, Jim [EMAIL PROTECTED]
Here is what I have in my /etc/shorewall/rules the ones with the # are old
ones.
#LAST LINE -- ADD YOUR ENTRIES BEFORE THIS ONE -- DO NOT REMOVECTION
SOURCE
remove this line that is above the rules, or they will newer get
activated...
as the shorewall
From: Lawson, Jim [EMAIL PROTECTED]
Did this below still nothing everything stops... Can you help more Please.
the three last lines of /etc/shorewall/routestopped should be:
--- cut ---
#INTERFACE HOST(S)
eth0
#LAST LINE...
--- cut ---
[EMAIL PROTECTED] shorewall]# service shorewall
From: Lawson, Jim [EMAIL PROTECTED]
Thomas I will Monday. I installed iptables and it works. 9.2 shore wall is
broken. I did the same think I did at home for 9.0 in control center and
it
works. Just on 9.2 it's broken.
What do you mean you installed iptables ???
Shorewall is an iptables based
From: Stefan Rijnhart [EMAIL PROTECTED]
Hi,
Mandrake has now released the public isos of 9.2 on their ftp sites.
Does anybody know if this release is based on the LG-friendly, updated
kernel?
In the root of the download location, there is a README.LG file, that
tells
the user to update
From: Rob Blomquist [EMAIL PROTECTED]
On Saturday 15 November 2003 4:01 am, Thomas Backlund wrote:
As stated before...
They are the same as the ISO's on the MandrakeClub and the ones shipped
of to paying customers...
Ummm. I tried to upgrade my laptop with 9.2 by ftp this evening. I used
From: Jarmo [EMAIL PROTECTED]
On Tuesday 18 November 2003 14:41, Stew Benedict wrote:
On Tue, 18 Nov 2003, Jarmo wrote:
Anybody know reasom,why gcc-3.3.2 was downgraded in 9.2 into 3.3.1?
In 9.1 it was 3.3.2.
It wasn't. 9.1 has 3.2.2.
Sorry...Missunderstanding...My BAD BAD
From: James Sparenberg [EMAIL PROTECTED]
On Tue, 2003-11-18 at 03:32, Angelo Naselli wrote:
So there isn't any problem is it?
I saw this thing because of a system that seems to be
slower and with more hd access so i assumed the
message
ide: Assuming 33MHz system bus speed for PIO
From: Bryan Phinney [EMAIL PROTECTED]
[...]
I rewrote the lmsensors init script so that it was manually loading the
modules rather than pulling them from the /etc/sysconfig/lmsensors file.
I
ran the script and it loaded the modules, then stopped the script and it
unloaded the modules. When I
1 - 100 of 102 matches
Mail list logo
