YES!
Time to upgrade my PC again. :)
Mike - AA8K
Frank Brickle wrote:
Duane - N9DG wrote:
--- Eric Wachsmann [EMAIL PROTECTED] wrote:
...We have
just about
exhausted the combinations of mouse clicks/drags with the
display...
How about introducing multiple horizontal zones in the
Agree, had it happen just last night. I recycled power to my FA-66
and it also was fine.
Neal Campbell K3NC
[EMAIL PROTECTED]
telnet to our DX Spotting clusters at: dxc.k3nc.com, ports 12001 and 23
Devoted to Dogs: How to be your dog's best owner
Great Dog Book at www.abrohamneal.com
On
...
URL:
http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachment
s/20070711/4d3f2709/attachment.html
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http
SVN 1326
Freq Cal
10.000
If I click on Start it goes to the 10meg WWV and I get an Error window
Peak is outside valid range
Click 'OK' and the SDR-1000 returns to normal.
-
grep..grep..grep... (a Frog with UNIX stuck in its' throat)
At 08:25 PM 7/10/2007 -0400, you wrote:
Hi Ray,
Point well taken.
I shouldn't have described what I had in mind as splatter. Over
modulation would probably be more correct.
I DX foreign medium wave stations from Asia and the Pacific, and the #1
reason this type of DXing is a big challenge is
Yes, I've done this before with the Radio Plus Quantum Phaser and my current
Wellbrook phased array. Some of my MW DX friends have done extensive work in
this area by modifying the MFJ phaser, or building Misek-based units such as
the phasers Dallas Lankford designs. Mark Connelly in particular is
with an Amp
and see how it work please?any rf prob?
vy73
and all the best
Elan g0uut
-- next part --
An HTML attachment was scrubbed...
URL:
http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20070711/4d3f2709/attachment.html
All,
As I was [one] of the submitters of the manual notch filter, I have
given some thought on how it can be implemented. Open discussion. I
like to click on a signal to do something with it, and I am dedicated
to the mouse. However, that is not going to work, as clicking on a
signal moves
The signal strength of the 10 MHz WWV signal was too low to perform the
calibration.
-Tim
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of FireBrick
Sent: Wednesday, July 11, 2007 11:32 AM
To: FlexRadio List
Subject: [Flexradio] what does this mean
Frank's approach of using a 3D style control sounds exciting and I'm
guessing lends itself to many other functions for which it is currently
difficult to provide a suitable display/interaction metaphor. However,
perhaps in the short term, one possible way to disambiguate mouse click
intent might
A couple of observations...
1. ) I think a simple notch filter that is outside of the filter pass
band, or its immediate skirts, is NOT going to effect anything that you
hear within the filter pass band. Any transmitter splatter or intermod
products that occurs before the ADC can not be
Hey,
That happened to me a few days ago. I kept on hitting the calibrate button
until it finally took. WWV was coming in pretty strong so this is probably a
bug.
The new PA calibration routine made my radio put out 145 watts on 80 meters.
It finally settled down to 100. My power supply meters
Here is the grand experiment we are going to try when we finally get to
calm down from the Flex5000 rush to finish. I have done enough
matlab/octave experimentation to expect it to work so long as we define
what it is we mean by work.
Suppose you are listening to weak signal A. Strong
Mike Naruta wrote:
YES!
Time to upgrade my PC again. :)
Na. We are not using the power of some of the measliest graphics
cards out there. I never even warm up my two generation old AGP Radeon
card. Why? We are insisting on continuing to use this resource hogging
GDI because
/flexradio_flex-radio.biz/attachments/20070711/a13cd4bf/attachment.html
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail-archive.com/flexradio%40flex
Wow!
until this I had not thought there was any bennfit to out of passband
notch.
Jim - W4YXU
- Original Message -
From: Bob McGwier [EMAIL PROTECTED]
To: Ray Andrews [EMAIL PROTECTED]
Cc: flexradio@flex-radio.biz
Sent: Wednesday, July 11, 2007 1:41 PM
Subject: Re: [Flexradio] Manual
not sure I'm still enabled.
-
New Mail not found. Start whine-pout sequence? (Y/N)
-
Bill H. in Chicagoland
webcams at http://76.16.160.118:8080/
weather at http://hhweather.webhop.org
All,
As I was [one] of the submitters of the manual notch filter, I have
given some thought on how it can be implemented. Open discussion. I
like to click on a signal to do something with it, and I am dedicated
to the mouse. However, that is not going to work, as clicking on a
signal
I like this idea quite a bit. Mainly because I use this concept all the
time in other applications (IDE, Paint Shop Pro, Word, etc).
Eric Wachsmann
FlexRadio Systems
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
Sent: Wednesday, July 11, 2007 1:08 PM
To:
I like this idea quite a bit. Mainly because I use this concept all
the
time in other applications (IDE, Paint Shop Pro, Word, etc).
I set my sights much lower. I'm just hoping some day in the distant
future we'll be able to re-size the panadapter display that we already
have.
Ah, to
Try 15mhz or wait for better propagation.
Bob W6TR
- Original Message -
From: Tim Ellison [EMAIL PROTECTED]
To: FireBrick [EMAIL PROTECTED]; FlexRadio List
flexradio@flex-radio.biz
Sent: Wednesday, July 11, 2007 1:26 PM
Subject: Re: [Flexradio] what does this mean
The signal strength
: http://www.flex-radio.com/
-- next part --
An HTML attachment was scrubbed...
URL:
http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20070711/503e896e/attachment.html
___
FlexRadio mailing list
FlexRadio
: http://www.flex-radio.com/
-- next part --
An HTML attachment was scrubbed...
URL:
http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20070711/8198e07f/attachment.html
___
FlexRadio mailing list
At 10:03 AM 7/11/2007 -0700, you wrote:
Yes, I've done this before with the Radio Plus Quantum Phaser and my current
Wellbrook phased array. Some of my MW DX friends have done extensive work in
this area by modifying the MFJ phaser, or building Misek-based units such as
the phasers Dallas Lankford
Hi Jim,
Feedback from Flex hasn't been very promising over the last year regarding a
receive-only unit. My SDR-1000 was probably one of the last receive-only
units they sold. It disappeared from their Web site shortly after my
purchase in late 2005.
I certainly hope Flex reconsiders, as there
Hello,
I upgraded to latest SVN again today, and suddenly I discover a huge spike
on the panadapter, to the left of the
operating frequency (SSB) and I dont think I had it before.? (Had 1115)
I sounds like a klick in the speaker and appears suddenly when ending tx.
Any others??
Dear FLEX-5000 customers,
Last week I posted the following status report to the reflector regarding
our FLEX-5000 production status:
http://www.mail-archive.com/flexradio@flex-radio.biz/msg16535.html.
Replacement of the rejected front and rear panels has been and still is the
key pacing item
I have loaded all required to get Vista to work, but I have this problem.
There is terrible noise on the sdr1000 screen and I cannot hear any stations or
very faint. When I reboot into XP the noise is not there and the radio is very
senstive. The noise in the Vista setup even causes the out
move to bolder
Boardwalk for $500? In 2007? Ha! Play Monopoly Here and Now (it's updated for
today's economy) at Yahoo! Games.
http://get.games.yahoo.com/proddesc?gamekey=monopolyherenow
was scrubbed...
URL:
http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20070711/3c334d17/attachment.html
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link
At 11:41 AM 7/11/2007, Bob McGwier wrote:
Here is the grand experiment we are going to try when we finally get to
calm down from the Flex5000 rush to finish. I have done enough
matlab/octave experimentation to expect it to work so long as we define
what it is we mean by work.
Suppose you are
Guy,
Actually, we will consider a receive only version after we get the A, C, and
D models as well as the second receiver into full production. For that
version, we can sacrifice some of the ham band optimized filters in return
for the use on the low bands. It would still give general coverage
The issue is probably the sound card driver. What sound card are you
using?
-Tim
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of David
Sent: Wednesday, July 11, 2007 7:14 PM
To: flexradio@flex-radio.biz
Subject: [Flexradio] visa and noise
I have
and industry-leading
spam and email virus protection.
-- next part --
An HTML attachment was scrubbed...
URL:
http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20070711/56ec7211/attachment.html
___
FlexRadio
attachment was scrubbed...
URL:
http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20070711/222db0f4/attachment.html
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex
-- Unlimited storage and industry-leading
spam and email virus protection.
-- next part --
An HTML attachment was scrubbed...
URL:
http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20070711/386a8a79/attachment.html
That's encouraging news, Gerald. Thanks for mentioning your tentative plans
for a receive-only model again.
Please give consideration to onboard low pass filters for longwave and
medium wave. They probably wouldn't need to have as many poles of filtering
as mine do. I have three separate LP
37 matches
Mail list logo
