It seems to happen to some and not others. I have heard more reports from
Delta 44 owners than anything else, but I think we have more Delta 44 owners
than anything else. ;) We'll be looking at this more closely in the lab
later this week.
Eric Wachsmann
FlexRadio Systems
-Original
, but
things were definitely faster on a clean load (2-4%).
Eric Wachsmann
FlexRadio Systems
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Gerald Capodieci
Sent: Wednesday, June 28, 2006 5:02 PM
To: flexradio@flex-radio.biz
Subject: Re: [Flexradio] Windows
software with AGC and filtering built in
(not just a wave file player).
Eric Wachsmann
FlexRadio Systems
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED]
Sent: Saturday, July 01, 2006 1:12 AM
To: FlexRadio@flex-radio.biz
Subject
ks.sys is the kernel streaming driver. This is likely audio related. What
soundcard are you using? Are you using VAC? If so, which version?
Eric Wachsmann
FlexRadio Systems
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Chris Gerber
Sent: Thursday
disagree with
this idea?
Eric Wachsmann
FlexRadio Systems
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
radio.biz] On Behalf Of Jerry
Sent: Wednesday, July 12, 2006 4:44 PM
To: FlexRadio@flex-radio.biz
Subject: [Flexradio] DIGL Frequency readout
Hi
I'm no expert, but there's definitely a reinforced feedback loop in there
somewhere. The no_talking file makes that obvious.
Remember that you can wire the PTT signal to the back panel too (X2-11) if
you do decide to split the audio and PTT signals from the mic.
Eric Wachsmann
FlexRadio
://www.nabble.com/Disable-TSVNCache.exe-to-minimize-disk-IO--t920019.htm
l
Eric Wachsmann
FlexRadio Systems
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
radio.biz] On Behalf Of Jim Lux
Sent: Tuesday, July 18, 2006 8:57 AM
To: Sami Aintila
Cc: flexRadio
Subject: Re
Now THAT is something I'd like to see in a Geico commercial. :)
Eric Wachsmann
FlexRadio Systems
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
radio.biz] On Behalf Of BILL GUYGER
Sent: Wednesday, July 19, 2006 11:21 AM
To: [EMAIL PROTECTED]
Cc: flexradio
Based on the CPU Charts at tomshardware.com, it looks like the Athlon 64
3500+ would blow the socks off of your 2.4GHz P4. The Athlon 3200+ would be
a closer race, but it should at least be comparable.
Eric Wachsmann
FlexRadio Systems
-Original Message-
From: [EMAIL PROTECTED
Jerry,
What happens when you turn the Spur Reduction off? Does the spur move?
What mode is this group running? If it's not CW, try turning on the ANF
(Automatic Notch Filter) to cut the birdie out.
Eric Wachsmann
FlexRadio Systems
-Original Message-
From: [EMAIL PROTECTED] [mailto
This sounds like the intended behavior except when in Bypass mode. We have
fixed it so that using TUN in Memory or Full Tune mode (with the ATU) no
longer updates the TUN power to 15. When in Bypass mode, it should work
just like it does without the ATU.
Eric Wachsmann
FlexRadio Systems
This was fixed just now in SVN Rev. 614.
Eric Wachsmann
FlexRadio Systems
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
radio.biz] On Behalf Of Martin Hirsch
Sent: Tuesday, July 25, 2006 9:33 AM
To: flexRadio@flex-radio.biz; Jeff Anderson
Subject: Re
Set the DSP buffer to 2048 and then the Audio buffer to 512 and see what
happens.
Eric Wachsmann
FlexRadio Systems
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
radio.biz] On Behalf Of Paul Shaffer
Sent: Friday, July 28, 2006 12:43 PM
To: [EMAIL PROTECTED
The BandText table simply denotes whether you should be able to transmit in
that band. The actual checking of the frequency is deeper in the code.
Please contact me privately for information about unlocking the console for
legitimate applications (different IARU plan, MARS, etc).
Eric
in
TortoiseSVN. It makes things very easy to follow.
Eric Wachsmann
FlexRadio Systems
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
radio.biz] On Behalf Of Jim, W4ATK
Sent: Saturday, July 29, 2006 5:16 AM
To: Flex-radio Reflector
Subject: [Flexradio] Version 1.6.1
Yes. Sometimes we can fix things over the weekend, but this weekend
everyone was out of town. A fix was posted yesterday that should address
the fatal error on startup. This will be looked at more closely this week.
Eric Wachsmann
FlexRadio Systems
-Original Message-
From: [EMAIL
to transmit under these conditions. This is why we automatically set the
outputs to -10dBv each and every time you start the PowerSDR software.
Eric Wachsmann
FlexRadio Systems
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
radio.biz] On Behalf Of Radio Station W5AMI
Welcome to the party Ian. We hear you loud and clear. :)
Eric Wachsmann
FlexRadio Systems
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
radio.biz] On Behalf Of Ian Wade
Sent: Tuesday, August 01, 2006 11:00 AM
To: FlexRadio@flex-radio.biz
Subject
WWV will work fine to calibrate the frequency. More importantly, you need a
stable strong signal source for image calibration. You can use another
rig's transmitter to do this though.
Eric Wachsmann
FlexRadio Systems
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL
It is enjoyable if your PC can handle it. The panadapter becomes twice as
wide (not just the SPEC mode). The block latency is cut in half. It will
increase your CPU load. If it goes from 7% to 12% though, I'd call that a
net win.
Eric Wachsmann
FlexRadio Systems
-Original Message
Do you have VAC Enabled? You may want to try using the VAC Auto Enable that
will disable VAC when in modes other than DIGL, DIGU and DRM. We will
eventually have a VAC Enable button on the front panel.
Eric Wachsmann
FlexRadio Systems
-Original Message-
From: [EMAIL PROTECTED
the PowerSDR software to fix
the crosstalk issue that the Beta Firmware brought with it. It took us
quite some time to properly test and categorize the new bug and the
subsequent software patch in the SVN revision. Thanks for your patience
while we worked this issue to conclusion.
Eric Wachsmann
the
outstanding software issues are and the status of the fixes.
Eric Wachsmann
FlexRadio Systems
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
radio.biz] On Behalf Of Duffy
Sent: Friday, August 04, 2006 2:34 PM
To: FlexRadio@flex-radio.biz
Subject: [Flexradio
the
default behavior, we have not changed it to date. If we got enough input
that people wanted it turned off, we could make it happen.
Eric Wachsmann
FlexRadio Systems
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
radio.biz] On Behalf Of Duffy
Sent: Friday
do not submit a
report after starting one. The sequence of numbers isn't so important to us
as having one place to track bugs with a way to reference each bug.
Eric Wachsmann
FlexRadio Systems
-Original Message-
From: Duffy [mailto:[EMAIL PROTECTED]
Sent: Monday, August 07, 2006 12:16
you have to click on the control first.
Eric Wachsmann
FlexRadio Systems
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
radio.biz] On Behalf Of Jimmy Jones
Sent: Saturday, August 05, 2006 8:29 PM
Cc: FlexRadio@flex-radio.biz
Subject: Re: [Flexradio] Bug
Mike,
This is because the SSB PTT line is shared with the CW Dot line. If you
connect to the Dash line with a straight key (or keyer) setup, you can avoid
triggering the SSB PTT.
Eric Wachsmann
FlexRadio Systems
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED
I may be reading your message wrong, but if you are not using the DEMI
designed for use with the SDR-1000, then I would not use the XVTR Present
checkbox on the Setup Form. Rather, you would setup all of your
transverters on the XVTR form.
Eric Wachsmann
FlexRadio Systems
-Original
to mitigate these by using
higher Process Priority settings in the PowerSDR software.
Hope that helps some.
Eric Wachsmann
FlexRadio Systems
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
radio.biz] On Behalf Of [EMAIL PROTECTED]
Sent: Tuesday, August 08, 2006
tuned
the ATU.
Eric Wachsmann
FlexRadio Systems
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
radio.biz] On Behalf Of bobwendy
Sent: Tuesday, August 08, 2006 7:55 PM
To: flexradio@flex-radio.biz
Subject: [Flexradio] AM power out
There is big difference
This is definitely something that we can address. I'll take a look at the
software today.
Eric Wachsmann
FlexRadio Systems
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
radio.biz] On Behalf Of Marc Franco
Sent: Tuesday, August 08, 2006 8:14 PM
To: flexradio
Stig,
The audio connectors on the SDR-1000 are unbalanced 1/8 stereo phono plugs.
If you'd like, you can connect your microphone directly to the soundcard
balanced. I think that's the only place it makes sense with our hardware
though.
Let us know if you need more information.
Eric Wachsmann
Could it have been on our articles page?
http://www.flex-radio.com/articles.htm
Eric Wachsmann
FlexRadio Systems
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
radio.biz] On Behalf Of Michael
Sent: Wednesday, August 09, 2006 9:27 PM
To: flexradio@flex
that would use
this existing functionality.
Eric Wachsmann
FlexRadio Systems
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
radio.biz] On Behalf Of Alberto I2PHD
Sent: Thursday, August 10, 2006 12:03 PM
To: flexradio@flex-radio.biz
Subject: [Flexradio] OT : USB
Roy,
How are you connecting your footswitch? You probably will want to use the
X2 Pin 11 connection as it can be used for any mode.
Eric Wachsmann
FlexRadio Systems
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
radio.biz] On Behalf Of ROY LONGWORTH
Sent
If you already have v3.12, the later versions won't buy you much at the
moment. Eventually we expect to have WDM-KS driver support which will allow
lower latency digital operation.
Eric Wachsmann
FlexRadio Systems
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED
I have not used DX4WIN, but I would imagine you could use the VAC Setup and
Use document or even the Operating Manual (both available on our download
page at www.flex-radio.com) as a general outline of what you need to setup
to make it work properly.
Eric Wachsmann
FlexRadio Systems
I think I've seen this message before when the PowerSDR VAC settings don't
match that of the third party software. Double check whether it is
stereo/mono and what sample rate it uses.
Eric Wachsmann
FlexRadio Systems
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED
Yes. You should see the USB Adapter in the Device Manager once the unit is
plugged in. Do you get any sort of pop up when plugging the adapter into
the computer? If not, try it in another port (and another computer too if
possible).
Eric Wachsmann
FlexRadio Systems
-Original Message
Jerry,
Unfortunately, there is not a hardware ALC input on the SDR-1000. We do
have quite a few people using amplifiers with our rig though. Maybe others
could pipe up and tell you how they have their ALC setup (assuming their
amps have that option).
Eric Wachsmann
FlexRadio Systems
Mike,
This sounds like you are picking up the other radios local oscillator rather
than some other kinds of spurs. I don't think we can do anything about this
in software other than to ensure that when we have multiple rig controls
that they are on different frequencies.
Eric Wachsmann
Al,
There is a control that allows you to switch this. Just below where you
enable the ATU on the SetupForm, there is a control that allows you to
switch between Positive, Negative, and No XVTR TR logic.
Eric Wachsmann
FlexRadio Systems
-Original Message-
From: [EMAIL PROTECTED
When I read this, I couldn't help but think that this is yet another feature
of the SDR-1000. It allows another venue for you to talk to yourself...
And it is considered cool rather than crazy. :)
Eric Wachsmann
FlexRadio Systems
-Original Message-
From: [EMAIL PROTECTED] [mailto
Ken,
I think the manual now has this information in the section on operating
digital modes.
Eric Wachsmann
FlexRadio Systems
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
radio.biz] On Behalf Of Ken N9VV
Sent: Thursday, August 17, 2006 12:35 PM
To: FlexRadio
To get on board with the SVN releases, please see the TortoiseSVN guide that
is on our download page at www.flex-radio.com.
Eric Wachsmann
FlexRadio Systems
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
radio.biz] On Behalf Of Gerald Capodieci
Sent: Sunday
While some controls may make more sense to be vertical, there simply is not
room given the current console screen to mix and match between horizontal
and vertical. This is yet another reason to look forward to more flexible
interfaces.
Eric Wachsmann
FlexRadio Systems
-Original Message
Crit,
What version of the software are you using? If you are using an SVN
version, take a look at the RF control on the front panel. Also, make sure
the front panel AGC setting is not set to Fixd.
Eric Wachsmann
FlexRadio Systems
-Original Message-
From: [EMAIL PROTECTED] [mailto
. There is a description (sometimes lengthy) for each
control. If you don't find what you're looking for there, let us know and
we'll try to do a better job of explaining (and probably update the manual).
Eric Wachsmann
FlexRadio Systems
-Original Message-
From: [EMAIL PROTECTED] [mailto
and is
using different settings than how you have it configured in PowerSDR.
Eric Wachsmann
FlexRadio Systems
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
radio.biz] On Behalf Of Jim, W4ATK
Sent: Wednesday, August 23, 2006 6:54 AM
To: Flex-radio Reflector
Subject
on playback). Otherwise the
process is the same.
Suggestions for how to improve this are welcome.
Eric Wachsmann
FlexRadio Systems
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
radio.biz] On Behalf Of Philip M. Lanese
Sent: Tuesday, August 22, 2006 11:05 PM
To: Scott
Tim is basically right. For a more technical description of PortAudio
errors, you can visit www.portaudio.com. Click on Documentation, then V19
API. This will show you the Doxygen notes from portaudio.h.
Eric Wachsmann
FlexRadio Systems
-Original Message-
From: [EMAIL PROTECTED
and concerns.
Eric Wachsmann
FlexRadio Systems
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
FlexRadio
This is a software issue that we are currently looking into. Thanks for the
report.
Eric Wachsmann
FlexRadio Systems
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
radio.biz] On Behalf Of David Woodhead
Sent: Thursday, August 24, 2006 9:27 AM
To: FlexRadio
=performance+c
ounter
Eric Wachsmann
FlexRadio Systems
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
radio.biz] On Behalf Of Radio Station W5AMI
Sent: Thursday, August 24, 2006 10:16 AM
To: flexradio@flex-radio.biz
Subject: [Flexradio] CPU % indicator
I don't think there is a way to remove them. We can give them different
states, but I don't think the states make sense right now (for now they
match our bug tracking states). We'll get that worked out over time.
Eric Wachsmann
FlexRadio Systems
-Original Message-
From: [EMAIL
This may have to do with which .exe you associate the profile. I would hope
that it would just respond to any PowerSDR.exe process that runs, but it may
be more specific than that requiring you to reassociate it when you run a
console out of a different directory.
Eric Wachsmann
FlexRadio
like/act/etc. All the
more reason to continue down the path to simplify custom customer created
consoles (4 C's --- hmmm). :)
Eric Wachsmann
FlexRadio Systems
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
radio.biz] On Behalf Of [EMAIL PROTECTED]
Sent: Friday
Great! Thanks for the report Pete. :)
Eric Wachsmann
FlexRadio Systems
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
Sent: Monday, August 28, 2006 6:05 AM
To: [EMAIL PROTECTED]; flexradio@flex-radio.biz
Subject: RE: [Flexradio] Crackle on Received Audio
According to their website it is limited to XP.
Eric Wachsmann
FlexRadio Systems
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
radio.biz] On Behalf Of Joel Harrison
Sent: Monday, August 28, 2006 10:49 AM
To: 'FlexList'
Subject: [Flexradio] Firebox
Which soundcard are you using? It sounds like you may have the output
cables reversed (i.e. the left channel is connected where the right channel
should be and vice versa).
Eric Wachsmann
FlexRadio Systems
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED
Al,
I think there is a limitation in the current software that requires that the
monitor be enabled in order to record the transmit audio. We'll be looking
at this limitation going forward.
Eric Wachsmann
FlexRadio Systems
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL
are not just jumping on the wrong language highway with no
exits in sight.
Keep up the good work.
Eric Wachsmann
FlexRadio Systems
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
radio.biz] On Behalf Of Paul Shaffer
Sent: Tuesday, August 29, 2006 5:14 PM
To: flexradio
what to do
in CWGet. If you're still stuck after that, let us know specifically what
seems to be the issue and we'll do what we can to help.
Eric Wachsmann
FlexRadio Systems
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
radio.biz] On Behalf Of [EMAIL PROTECTED
Welcome aboard and let us know if you have any additional questions.
Eric Wachsmann
FlexRadio Systems
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail
This is directly related to the USB issue. Let's get that resolved and this
will take care of itself.
Eric Wachsmann
FlexRadio Systems
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
radio.biz] On Behalf Of NZ8J
Sent: Wednesday, August 30, 2006 6:42 PM
for screenshots.
Given all of those settings, you should have satisfactory CW performance up
to at least 50WPM (and probably faster). Let us know what you find.
Eric Wachsmann
FlexRadio Systems
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
radio.biz] On Behalf
a search for ctasio.dll and
delete every instance you can find. That should take care of the warning.
Eric Wachsmann
FlexRadio Systems
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
radio.biz] On Behalf Of NZ8J
Sent: Wednesday, August 30, 2006 4:53 PM
To: flexradio
Martin,
I'm not sure why this would happen. Do you have VAC setup to use the Delta
44 is some way? We do adjust the input/output settings to the correct
levels (-10dBv or +4dBu) through the delta 44 dll, but we don't
(intentionally) change the DMA buffer setting.
Eric Wachsmann
FlexRadio
Could all of you that are having this problem please email me privately?
I'd like to get this resolved, but since I can't duplicate this on my
machine, I'll need your help to test. Thanks.
Eric Wachsmann
FlexRadio Systems
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL
Mr. Ackrill,
It has always been our intention to include bandplans for different areas.
However, we will need help to define where the bandplans differ in order to
get this done. What we probably need is someone to step up and take
ownership of this idea and drive it to completion.
Eric
Bill,
I know of one way to debug stuff (I used it to dig into the DirectX output).
Go to the project properties and under Configuration Properties -
Debugging, set Enable Unmanaged Debugging to true. Be prepared for an
overwhelming amount of PortAudio info.
Eric Wachsmann
FlexRadio Systems
In PortAudio's defense, they do this because the combination of Windows and
the hardware drivers yield unreliable information when using the traditional
means of finding what sample rates a device supports.
Eric Wachsmann
FlexRadio Systems
-Original Message-
From: [EMAIL PROTECTED
, skype, logging software, digital mode software, etc etc).
All of that stuff adds up, but you should be OK to run 3-4 apps out of that
list without a problem using 512MB of ram.
Eric Wachsmann
FlexRadio Systems
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
radio.biz
mode.
Eric Wachsmann
FlexRadio Systems
-Original Message-
From: Bill Tracey [mailto:[EMAIL PROTECTED]
Sent: Tuesday, September 05, 2006 10:52 AM
To: Eric Wachsmann; flexradio@flex-radio.biz
Subject: RE: [Flexradio] Anyone know how to debug into the Native code
fromPowerSDR
Hmm
, it is not supported. This is not a good solution, but it
is the only one that I am aware of that gives consistently correct results.
Eric Wachsmann
FlexRadio Systems
-Original Message-
From: Jim Lux [mailto:[EMAIL PROTECTED]
Sent: Tuesday, September 05, 2006 1:41 PM
To: Eric
(not that I blame them) and they don't have an interface to open streams and
get at the raw samples. Hence the need for PortAudio (which is cross
platform as a nice bonus). :)
Eric Wachsmann
FlexRadio Systems
-Original Message-
From: Jim Lux [mailto:[EMAIL PROTECTED]
Sent: Tuesday
The delay is included to allow you to delay for slower relays to completely
close before presenting RF on the output. For most amplifiers/xvtrs, 50ms
is plenty. Many work with a setting of 0ms. Your mileage may vary
depending on your hardware.
Eric Wachsmann
FlexRadio Systems
PS. Do you
that there are
some that cannot access the SVN site due to firewalls or limited internet
access.
Eric Wachsmann
FlexRadio Systems
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
radio.biz] On Behalf Of [EMAIL PROTECTED]
Sent: Thursday, September 07, 2006 1:12 AM
don't
need v2.0 for our software, but it shouldn't hurt to have it installed as
long as v1.1 remains on the system.
Eric Wachsmann
FlexRadio Systems
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
radio.biz] On Behalf Of [EMAIL PROTECTED]
Sent: Thursday, September 07
In the latest SVN version, there is not a limitation that I could find other
than 100w on 60m.
Eric Wachsmann
FlexRadio Systems
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
radio.biz] On Behalf Of David Ackrill
Sent: Thursday, September 07, 2006 6:25 AM
Cc
is directly
in the center.
Eric Wachsmann
FlexRadio Systems
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
radio.biz] On Behalf Of Radio Station W5AMI
Sent: Thursday, September 07, 2006 11:45 AM
To: FlexRadio List
Subject: Re: [Flexradio] PowerSDR 1.6.3 SVN 665
as he did
95% of the work.
Eric Wachsmann
FlexRadio Systems
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
radio.biz] On Behalf Of Mark Amos
Sent: Thursday, September 07, 2006 5:46 PM
To: 'FlexRadio List'
Subject: [Flexradio] Pan and Zoom
Software guys,
You
Sounds like 60Hz noise or grounding issues to me.
Eric Wachsmann
FlexRadio Systems
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
radio.biz] On Behalf Of NZ8J
Sent: Friday, September 08, 2006 4:55 PM
To: flexradio@flex-radio.biz
Subject: [Flexradio] Hum on TX
Have you tried changing the process priority (Setup Form - General Tab -
Options SubTab)?
Eric Wachsmann
FlexRadio Systems
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
radio.biz] On Behalf Of David Ackrill
Sent: Sunday, September 10, 2006 4:24 AM
Cc
. It is on the
list of things to do. For now, I would recommend using headphones while
operating VOX.
Eric Wachsmann
FlexRadio Systems
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
radio.biz] On Behalf Of Radio Station W5AMI
Sent: Sunday, September 10, 2006 1
.
Eric Wachsmann
FlexRadio Systems
-Original Message-
From: Radio Station W5AMI [mailto:[EMAIL PROTECTED]
Sent: Monday, September 11, 2006 12:19 PM
To: Eric Wachsmann
Cc: KA5MIR; flexradio@flex-radio.biz
Subject: Re: 1.6.3 SVN 668 - Includes some great enhancements
Eric,
I guess
So the questions are:
1. How far do we want to be able to go to pull in/lock on to signals? 2kHz?
3kHz?
2. How far will the current SAM mode currently pull signals in? This should
be pretty easy to find out experimentally using the signal generator built
into the console.
Eric Wachsmann
Quick Start Guide that is available on our Download page at
www.flex-radio.com. Let us know if you have any other questions.
Eric Wachsmann
FlexRadio Systems
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
radio.biz] On Behalf Of Allen Boehm
Sent: Monday, September
Andy,
Did you import your database or recalibrate the RX Level on the new version?
This or perhaps differing Preamp settings may account for the difference in
noise floor.
Eric Wachsmann
FlexRadio Systems
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
radio.biz
resolution on your screen. To do this, right click on the desktop and
select Properties. Then click the Settings Tab. You'll see a slider
labeled Resolution. Move this slider down for a smaller resolution (and a
relatively larger console).
Eric Wachsmann
FlexRadio Systems
-Original Message
of the DSP.
Eric Wachsmann
FlexRadio Systems
-Original Message-
From: David Ackrill [mailto:[EMAIL PROTECTED]
Sent: Wednesday, September 13, 2006 12:47 AM
To: Eric Wachsmann
Cc: FlexRadio@flex-radio.biz
Subject: Re: [Flexradio] No TX
Hi Eric,
That's correct, I do not have
Make sure that the SVN version of the console (and any other documents in
the folder) are closed. Then right click on the SVN folder and select
TortoiseSVN - Cleanup. This should get you going again.
Eric Wachsmann
FlexRadio Systems
-Original Message-
From: [EMAIL PROTECTED] [mailto
What frequency are you doing this on? Could you by any chance have a XVTR
setup around that frequency range? This could cause your output to be
extremely low.
Eric Wachsmann
FlexRadio Systems
-Original Message-
From: David Ackrill [mailto:[EMAIL PROTECTED]
Sent: Wednesday
a
stronger input signal gives a larger image and thus the calibration can more
effectively null the signal further (typically all the way into the noise
floor).
Eric Wachsmann
FlexRadio Systems
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
radio.biz] On Behalf
It believe it is just a zip of the binary files as opposed to a complete
installer (similar to SVN) if that is what you were asking.
Eric Wachsmann
FlexRadio Systems
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
radio.biz] On Behalf Of Jerry Flanders
Sent
be at least 2x work at best undoing our current source code data
model. All of this is to say that you may have to wait until the new
console for more Multi-RX functionality.
Eric Wachsmann
FlexRadio Systems
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
radio.biz
Split mode is working as best as I can tell. There was a problem with Split
+ XIT that will be fixed in SVN 684, but other than this, I could not find a
problem. It will still show up near the 0 Hz line. Perhaps that is
throwing some people off.
Eric Wachsmann
FlexRadio Systems
Dave,
This reminded me of something. You won't get good audio output if you have
something plugged into both the Line Out and the headphone output on the
MP3+. This will load down the output and you'll get very little drive out
of the radio. Perhaps this was the issue?
Eric Wachsmann
We need to lock the RF Gain together for the two receivers and this should
not be a problem.
Eric Wachsmann
FlexRadio Systems
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
radio.biz] On Behalf Of [EMAIL PROTECTED]
Sent: Wednesday, September 20, 2006 6:40 PM
Kevin,
100MHz is actually not a supported frequency since the DDS input multiplier
does not officially have a 2x setting. It does seem to work though,
strangely enough.
Eric Wachsmann
FlexRadio Systems
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
radio.biz
1 - 100 of 1057 matches
Mail list logo
