On Sun, 2003-11-02 at 20:33, Max wrote:
Its no problem at all to use the A7V600 without SATA drives.
Check /usr/src/linux/drivers/ide/raid to be sure.
Andi
I'd like to see your hdparm -tT results please?
I'm attempting to build a SATA machine this week. I'll post back some
On Sun, 19 Oct 2003 18:13:04 +0200
Andreas Roedl [EMAIL PROTECTED] wrote:
Hello!
Am Donnerstag, 16. Oktober 2003 02:14 schrieb Mark Knecht:
On Wed, 2003-10-15 at 16:45, Peter Ruskin wrote:
I have three ATA133 drives and one DVD writer. The DVD writer is
on the second IDE channel and
Hello!
Am Freitag, 24. Oktober 2003 08:00 schrieb Mike Diehl
So I have a dumb question. What is SATA?
http://www.serialata.org/
http://images.google.com/images?q=Serial+ATA
Andi
--
[EMAIL PROTECTED] mailing list
Schaffter/CDS/CG/CAPITAL)
[EMAIL PROTECTED]Subject: Re: [gentoo-user] A7V600
SATA - Is this supported by a Gentoo kernel?
dyndns.org
On Tuesday 14 October 2003 05:28 pm, Andreas Roedl wrote:
Hello!
Am Dienstag, 14. Oktober 2003 20:16 schrieb Mark Knecht:
I think someone must be using this board? Have you had good results? Easy
or difficult to install Gentoo?
I just bought an Asus A7V600 SATA board where the SATA
Hello!
Am Sonntag, 19. Oktober 2003 22:00 schrieb Mark Knecht:
Are you using raid? We do not want to, so I just want to make sure that
there is no requirement to use raid. (I don't imagine there is, but just
being careful.)
No, I'm not using the RAID feature. My logical volumes (LVM) are
Hello!
Am Donnerstag, 16. Oktober 2003 02:14 schrieb Mark Knecht:
On Wed, 2003-10-15 at 16:45, Peter Ruskin wrote:
I have three ATA133 drives and one DVD writer. The DVD writer is on the
second IDE channel and the 3 hard disks are on a Promise ATA133 card -
which I've always trusted more
On Sun, 2003-10-19 at 09:13, Andreas Roedl wrote:
I'm using SATA. Not only the SATA controller but also SATA drives connected to
it. :-) All I can say is, that I wasn't able to use the SATA drives with the
Asus A7V600 Motherboard. I switched to the Asus A7N8X Deluxe board with its
On Thursday 16 Oct 2003 01:14, Mark Knecht wrote:
OK, so no one here in Gentooland is using SATA. Do you know if this
'Compatibility Mode' for the SATA drive controller exists in your
machine's BIOS? If this is a machine that you reboot once in a while,
would that be something you'd mind
On Wednesday 15 October 2003 01:28, Andreas Roedl wrote:
Hello!
Am Dienstag, 14. Oktober 2003 20:16 schrieb Mark Knecht:
I think someone must be using this board? Have you had good
results? Easy
or difficult to install Gentoo?
I just bought an Asus A7V600 SATA board where the
On Wednesday 15 Oct 2003 18:50, Mark Knecht wrote:
Peter - as I understand the numbering, the VT8237 is the South Bridge
on this motherboard which contains the SATA controller. Do the
patches you indicate are now in the gs-sources kernel specifically
include SATA patches? Or were you just
Hi Mark,
I have a Gigabyte GA-7VT600 1394 board that also has the VIA KT600
chipset. I'm not using the builtin VT8237 but the patch Mathieu posted
is identical to the driver included in at least the last three versions
of gs-sources, so there's no need to patch gs-sources.
Peter
Peter,
On Wednesday 15 October 2003 19:50, Mark Knecht wrote:
Mattieu - can you confirm if you are using a SATA hard drive? Or are you
using an EDIE drive on the more traditional parallel ATA interface that
this motherboard offers?
maTHieu please ;-)
I'm using pure IDE, sorry. sata cables are still
On Wed, 2003-10-15 at 16:07, mathieu perrenoud wrote:
On Wednesday 15 October 2003 19:50, Mark Knecht wrote:
Mattieu - can you confirm if you are using a SATA hard drive? Or are you
using an EDIE drive on the more traditional parallel ATA interface that
this motherboard offers?
maTHieu
On Wednesday 15 Oct 2003 21:21, Mark Knecht wrote:
Hi Mark,
I have a Gigabyte GA-7VT600 1394 board that also has the VIA KT600
chipset. I'm not using the builtin VT8237 but the patch Mathieu
posted is identical to the driver included in at least the last
three versions of gs-sources, so
On Wed, 2003-10-15 at 16:45, Peter Ruskin wrote:
I have three ATA133 drives and one DVD writer. The DVD writer is on the
second IDE channel and the 3 hard disks are on a Promise ATA133 card -
which I've always trusted more than VIA. I'm not using SATA drives -
that's what I meant to say.
I think someone must be using this board? Have you had good results? Easy or
difficult to install Gentoo?
Thanks,
Mark
--
[EMAIL PROTECTED] mailing list
Hello!
Am Dienstag, 14. Oktober 2003 20:16 schrieb Mark Knecht:
I think someone must be using this board? Have you had good results? Easy
or difficult to install Gentoo?
I just bought an Asus A7V600 SATA board where the SATA controller is included
in the southbridge and realized that its
On Wednesday 15 October 2003 01:28, Andreas Roedl wrote:
Hello!
Am Dienstag, 14. Oktober 2003 20:16 schrieb Mark Knecht:
I think someone must be using this board? Have you had good results? Easy
or difficult to install Gentoo?
I just bought an Asus A7V600 SATA board where the SATA
On Wednesday 15 Oct 2003 01:54, mathieu perrenoud wrote:
I patched the my kernels for vt8237 support (manually, because
gentoo-sources don't handle the patch) and now everything is fine
like before. Except
gs-sources has this patch already.
Peter
--
20 matches
Mail list logo
