I cannot solve your problem because I know little of X and nothing
about compiz (which I consider futile), but for this kind of problem,
you may want to know about the magic SysRq key. It allows you to at
least reboot your system cleanly when the system seems locked, and
some times can even
On 3/1/07, Boyd Stephen Smith Jr. [EMAIL PROTECTED] wrote:
That would be correct, since every forwarded packet passes though both the
pre-routing and post-routing chains, so you are counting every packet (at
least those that are not dropped in the FORWARD chain) twice.
I don't fully
On 3/2/07, Daniel Iliev [EMAIL PROTECTED] wrote:
CapSel wrote:
On 3/1/07, *Boyd Stephen Smith Jr.* [EMAIL PROTECTED]
mailto:[EMAIL PROTECTED] wrote:
That would be correct, since every forwarded packet passes though
both the
pre-routing and post-routing chains, so you
I'm trying to count bandwidth and number of packets on my router with rules
like:
iptables -t mangle -A PREROUTING -i eth0 -j stats
iptables -t mangle -A POSTROUTING -o eth0 -j stats
iptables -t mangle -A stats -p tcp -s $ip -j ACCEPT
iptables -t mangle -A stats -p udp -s $ip -j ACCEPT
iptables
Values taken from ifconfig shows same values as my firewall :)
Why
On 3/1/07, CapSel [EMAIL PROTECTED] wrote:
I'm trying to count bandwidth and number of packets on my router with
rules like:
iptables -t mangle -A PREROUTING -i eth0 -j stats
iptables -t mangle -A POSTROUTING -o eth0 -j stats
If it isn't luck it seems that some part of portage coused this error.
I untared wine tarball from distfiles and I've done everything
according to README inside. It compiled successfully. How can I check
what part of portage couse this?
On 1/9/07, CapSel [EMAIL PROTECTED] wrote:
I added en
PROTECTED] wrote:
On 1/7/07, CapSel [EMAIL PROTECTED] wrote:
... what else can I do?
I don't see anything obviously wrong. It looks like the problem
appears when autoconf/automake are run to generate the Makefiles.
Searching bugzilla for similar things leads me to believe that the
nls USE flag
What is going on? How can I compile wine and solve this problem? I'm
running out of ideas.
Whenever I try to emerge wine for my laptop I get error similar to this:
make[2]: Leaving directory
`/var/tmp/portage/wine-0.9.22/work/wine-0.9.22/dlls/oleacc'
make[2]: Entering directory
What is going on? How can I compile wine and solve this problem? I'm
running out of ideas.
Whenever I try to emerge wine for my laptop I get error similar to this:
make[2]: Leaving directory
`/var/tmp/portage/wine-0.9.22/work/wine-0.9.22/dlls/oleacc'
make[2]: Entering directory
-scanner -xml 0 kB
Total size of downloads: 0 kB
#
... what else can I do?
On 1/7/07, Richard Fish [EMAIL PROTECTED] wrote:
On 1/7/07, CapSel [EMAIL PROTECTED] wrote:
What is going on? How can I compile wine and solve this problem? I'm
running out of ideas.
It just compiled fine on my system
I'm getting this kind of error with wine 0.9.25 and 0.9.27. On .25 it
is on same directory, and on .27 on different. My friend _compiled_
wine with same USE flags, but he has pre 4.1 gcc.
I can't find on google similar bug with wine, but there were same
errors in other projects but soloved by
I use reiserfs (version 3.x, if correctly recall 3.6), haven't even touched reiser4(resierfs 4.X).On 10/28/06, Hemmann, Volker Armin
[EMAIL PROTECTED] wrote:On Saturday 28 October 2006 19:16, CapSel wrote:
I wrote five because I started to count 5 times ago. My RAM is in good condition
My server crashed twice with same Oops info. It runs apache,mysql,nfs
(client only), it has more than 2GB swap partition (does not use it
very much), 2GB ram, disk is Raptor on SATA...
I have two clones of this machine (computers with same parts, system
is copied by RSYNC) and only one of them
On 6/19/06, fei huang [EMAIL PROTECTED] wrote:
This mail is written in Chinese, yes, I'm sure, for I am a Chinese..
besides, please click the report spam button to get rid of it.
regards
daniel
On 6/18/06, CapSel [EMAIL PROTECTED] wrote:
I don't speak japanese at all :)
-- Forwarded
I don't speak japanese at all :)
-- Forwarded message --
From: 深圳物资集团有限公司 [EMAIL PROTECTED]
Date: Jun 18, 2006 12:48 AM
Subject: 深圳物资集团有限公司
To: [EMAIL PROTECTED]
致贵公司财务经理收:
本公司为广东省深圳物资集团有限公司.本着为双方公司利益的出发点,可向外代开(增值税发票)
(普通商品销售发票)(服务发票)(运输专用发票),代开手续费请来电与我公司负责人详谈。
I've found that I can scroll down page with floating flash animation
beyond page's end.
For example on http://serwisy.gazeta.pl/nauka/0,0.html
If a yellow one starts moving then scroll down :)
Is it a bug? Can this be dangerous for firefox?
--
gentoo-user@gentoo.org mailing list
On 5/25/06, Ryan Tandy [EMAIL PROTECTED] wrote:
Make a backup. Now.
When you start seeing 'end_request: I/O error', it's always (in my
experience) been a sign of a disk getting ready to pack it in.
Double check physical connections, make sure no wires are loose; if
S.M.A.R.T. is available,
On 5/25/06, Jarry [EMAIL PROTECTED] wrote:
Unfortunately smartmontools does not support SATA disks.
More exactly:
Smartmontools should work correctly with SATA drives under both
Linux 2.4 and 2.6 kernels, if you use the standard IDE drivers
in drivers/ide. If you use the new libata drivers,
On 5/25/06, Raymond Lewis Rebbeck [EMAIL PROTECTED] wrote:
smartmontools does in fact support SATA disks starting with kernel 2.6.15.
Use the '-d ata' argument with SATA disks and it will work fine.
For example: # smartmontools -d ata -a /dev/sda
--
Raymond Lewis Rebbeck
--
Hi all,
I have sata disk sda connected to ICH7 (ata_piix). Everything worked
fine until I saw these error messages:
May 24 23:31:43 foo ata1: command 0x35 timeout, stat 0xd1 host_stat 0x21
May 24 23:31:43 foo ata1: translated ATA stat/err 0xd1/00 to SCSI
SK/ASC/ASCQ 0xb/47/00
May 24 23:31:43 foo
On 4/6/06, Richard Fish [EMAIL PROTECTED] wrote:
On 4/6/06, CapSel [EMAIL PROTECTED] wrote:
...and it's happening again...
I inserrted DisplaySize in Monitor section with size in milimeters as
it was in man xorg.conf.
The one other thing i can think of to try is to use the command line
On 4/3/06, Richard Fish [EMAIL PROTECTED] wrote:
On 4/3/06, CapSel [EMAIL PROTECTED] wrote:
Yes, I tried... but it's not a solution. :(
Can anyone tell me how to check what is causing this?
I've seen this beforebut I also can't remember how I solved it.
My first guess is something
On 4/6/06, Richard Fish [EMAIL PROTECTED] wrote:
On 4/6/06, CapSel [EMAIL PROTECTED] wrote:
I don't know how it is possible but when I connected a monitor to my
laptop, after restart, every font was about 2px bigger and the problem
was visible.
Ahhh...sounds like X is detecting your
On 4/6/06, CapSel [EMAIL PROTECTED] wrote:
On 4/6/06, Richard Fish [EMAIL PROTECTED] wrote:
On 4/6/06, CapSel [EMAIL PROTECTED] wrote:
I don't know how it is possible but when I connected a monitor to my
laptop, after restart, every font was about 2px bigger and the problem
was visible
I wanted to make some animations not using flash so I founded svg, but
firefox 1.0.7 does not support it. I emerged adobesvg and:
1. firefox 1.0.7 (-bin) after changeing from page with svg to other
crashes all open windows. After right-click I can see menu of
adobesvg; without adobesvg it prompts
On 4/4/06, Christoph Eckert [EMAIL PROTECTED] wrote:
Can someone help me?
AFAIR Firefox 1.5 supports SVG, but only a subset of the complete
specification. I thinks that's why animations do not appear.
I also created some simple static SVGs, but Firefoy does not display
hatches in objects
On 4/3/06, Rafael Bugajewski [EMAIL PROTECTED] wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Am 02.04.2006 um 00:09 schrieb CapSel:
When I open a page and scroll it I see something like someone cuted or
added one row of pixels. I noticed it right after upgrading gtk+ froem
2.8.8
is:
[EMAIL PROTECTED] ~ $ inkscape
/home/capsel/.inkscape/preferences.xml:2: parser error : Start tag
expected, '' not found
^
Emergency save activated!
Emergency save completed. Inkscape will close now.
If you can reproduce this crash, please file a bug at www.inkscape.org
with a detailed
When I open a page and scroll it I see something like someone cuted or
added one row of pixels. I noticed it right after upgrading gtk+ froem
2.8.8 to 2.8.12, but I don't know if it is gtk problem. There are no
any errors/warnings.
Any idea of how to fix it?
--
gentoo-user@gentoo.org mailing
On 2/13/06, Holly Bostick [EMAIL PROTECTED] wrote:
John Jolet schreef:
Ummm... isn't there supposed to be a system.map for the kernel as
well?
I myself don't manually copy my kernels after compiling it; I use
make install to do so, and I have the following files in /boot for
all my
On 2/10/06, Robert Cernansky [EMAIL PROTECTED] wrote:
In my case I see (I have mounted it in /mnt/smb):
$ ls /mnt/smb/
WORKGROUP
$ ls /mnt/smb/WORKGROUP
PC1 PC2 PC3 ...
It is also possible omit WORGROUP, for example:
$ ls /mnt/smb/PC1
share1 share2 ...
I did not force it in any way.
On 2/11/06, Robert Cernansky [EMAIL PROTECTED] wrote:
Strange. It is corect to specify workgroup in ~/.smb/smb.conf (or copy it
from /etc/samba) so your configs are probably OK. Do you have fuse module
loaded or compiled into kernel?
Yes, I do have it. smbnetfs works at least when I 'cd' to
This is my script that scans configured subnetwork for guest shares,
makes entries for automount and restarts it.
Is this script helpful to someone? Is it worth to continue making it,
or is there a better way to allow normal programs to browse smb
network.
I don't have a inet page yet, but on
Thank you very much Robert, I'll try it right away.
On 2/10/06, Robert Cernansky [EMAIL PROTECTED] wrote:
On Fri, 10 Feb 2006 11:49:32 +0100 CapSel [EMAIL PROTECTED] wrote:
C This is my script that scans configured subnetwork for guest shares,
C makes entries for automount and restarts it.
C
I've made a little script in perl that scans some ip's and makes
entries for automount in /var/smb and than this script makes dirs like
192.168.0.3... and in them makes links to ghosted dirs in /var/smb.
Any one intrested in it?
This scripts scans only guest accessible shares.
It helped me solve
I wanted to make automation script that would add correct line tu
automount config file for usb devices. I made add script and remove
script, but remove script is not started even after reinserting any
usb storage device.
I added the line:
echo $REMOVER /var/log/udev-log
to usb.agent just after
Hi all,
I've set up autofs to mount floppy, cdrom and other devices, and some
smb shares on /mnt/auto/*. When I enter to one of those dirs device is
mounted but, as I set up timeout of 2 secends, nautilus changes dir to
~/ or just closes window after timeout. Is there a way to force
nautilus to
Hi group
I tryed to make config file for grub to migrate from centos to gentoo,
and even once it booted with saved I think. Some how it booted fith
entry in config file...
centos doesn't have grub-set-default so I ran grub, loaded
configfile and gave command savedefault 4... I don't remember
2005/12/27, Richard Fish [EMAIL PROTECTED]:
On 12/27/05, capsel [EMAIL PROTECTED] wrote:
title gentoo
root (hd0,0)
kernel /bzImage root=/dev/sdb2
savedefault fallback
Can you post the full contents of your grub.conf/menu.lst. That might help...
and it doesn't boot. I haven't
2005/12/27, Glenn Enright [EMAIL PROTECTED]:
On Wednesday 28 December 2005 08:13, capsel wrote:
2005/12/27, Richard Fish [EMAIL PROTECTED]:
On 12/27/05, capsel [EMAIL PROTECTED] wrote:
title gentoo
root (hd0,0)
kernel /bzImage root=/dev/sdb2
savedefault fallback
2005/12/21, Ryan [EMAIL PROTECTED]:
Here is a little trick you can use on google when looking for
converters.. Put the file extension of the file you want to convert in
front of the number 2. Like this: mdb2, and if you know the file
extension of the target, add that AFTER the 2. Like
2005/12/21, Iulian [EMAIL PROTECTED]:
Felipe Ribeiro wrote:
Where have you downloaded corel draw for linux? I've always looked for it!
:-)
On 12/21/05, Iulian [EMAIL PROTECTED] wrote:
Hi there,
Corel Draw 9 for linux works on Gentoo?
Iulian
--
OpenBase is part of OpenOffice... and is really slow on my laptop.
Whole OpenOffice is slow...
So I'll try that GUIs for mysql.
Do you know any replacement of OpenOffice for my laptop ? :)
BTW. Is there a tool to convert mysql (and possible other) databases
to and from ms-access *.mdb's ?
--
Is there any program for makeing data bases as fast as ms access
(works fast, small) and free as openbase?
On OpenBase process of opening a wizard for form took more than 8 minutes!!
I've got only 128 MB of ram.
--
gentoo-user@gentoo.org mailing list
I made a copy of 6 cdroms with
readcd -clone f=iso -noerror retries=1
and only two of them I can
mount -t udf,iso9660 ./iso /mnt/cdrom -o loop
These two are a copy of a protected game CD and others are images of
solaris CDs.
I can mount solaris' CDs with
mount -t iso9660 /dev/cdrom /mnt/cdrom
2005/12/14, Neil Bothwick [EMAIL PROTECTED]:
On Wed, 14 Dec 2005 16:13:59 +0100, capsel wrote:
Is there any way to bypass problem with solaris CDs or is there any
tool to convert images made by readcd -clone to iso image?
Have you tried creating the images directly, instead of using readcd
2005/12/14, Michael Kjorling [EMAIL PROTECTED]:
On 2005-12-14 17:45 +0100, [EMAIL PROTECTED] wrote:
Yes, it works, cp /dev/cdrom image.iso too. But some CDs have errors
(scratches) that cp/cat can't handle.
Tried dd with `conv=noerror'?
Not yet, but I just noticed that without -clone
Or maybe bind / to a subdir and tar from it. It's like
--one-filesystem but it works always (for me).
2005/11/4, Neil Bothwick [EMAIL PROTECTED]:
On Fri, 4 Nov 2005 14:29:17 +0100, Hemmann, Volker Armin wrote:
you need to --exclude /proc, or you'll run into problems.
You should exclude
Hi all,
I am writing some program... simple program and I've got some code:
j=strcmp( log, *(lines+i) );
printf( ble\n );
if( strcmp( log, *(lines+i) ) == 0 )
{
printf( ble2\n );
it is in for loop. ble and
thank you very much :)
--
gentoo-user@gentoo.org mailing list
1. I have 2 computers, first is directly connected to lan with IP
10.0.0.3 and gateway 10.0.0.1 and has second NIC with IP 10.0.0.4
connected to second computer with IP 10.0.0.5
{LAN}--[10.0.0.3|GENTOO|10.0.0.4]---[10.0.0.5]
Is it possible to set up routing from .5 to 10.0.0.0/24 (lan)?
I tryed to do links to directories on other partition on my
experimental server with SELinux. It had some problems with labeling
filesystem.
Is it possible to solve this issue?
2005/10/7, Neil Bothwick [EMAIL PROTECTED]:
On Fri, 07 Oct 2005 09:07:41 +0800, W.Kenworthy wrote:
If you want to
I'm not sure but if it shouldn't be Genux - Gentoo and Fedora -
Redhat. Note directions of arrows :)
2005/10/4, Frank Schafer [EMAIL PROTECTED]:
This will be the Gentoo - Genux equivalent to the Fedora - Redhat ?
Sounds impressive.
On Mon, 2005-10-03 at 14:44 -0400, Dave Nebinger wrote:
Where should I put my own script which is started after I hotplug my
usb bluetooth so that /etc/init.d/bluetooth is started after that?
and how to name it or how to findout the name?
--
gentoo-user@gentoo.org mailing list
is loaded automaticly.
What can I do to force hotplug/coldplug to load ide-cd and so to force
udev to create hdc? I added ide-cd to
/etc/modules.autoload.d/kernel-2.6.
2005/9/18, Bob Sanders [EMAIL PROTECTED]:
On Sat, 17 Sep 2005 20:01:41 +0200
capsel [EMAIL PROTECTED] wrote:
So the problem
2005/9/18, Holly Bostick [EMAIL PROTECTED]:
Well, that should work, but the 'better' way is simply to recompile the
kernel so that ide-cd is statically compiled (* or Y, rather than M),
and then it would be automatically loaded by the kernel when the device
is discovered (which would also tell
AFAIK:
packets can not reach destinations in other subnet (except 0.0.0.0)
than the subnet of your IP. You must have assigned an IP address from
same subnet as destination host.
so client can ping all 10 and two sides of server
Please check if you can ping other IP from 192.168.0.0 subnet.
On 9/16/05, Dave Nebinger [EMAIL PROTECTED] wrote:
I did something like that:
-I set up RC_DEVICE_TARBALL=no
-rebooted, all hdcX disappeard, and hdc appeard
-I set up RC_DEVICE_TARBALL=yes
-rebooted
-there is no hdc*
what else can I do?
Go to the udev migration thing in the
2005/9/17, Dave Nebinger [EMAIL PROTECTED]:
So for example lp* stays (it's another one that disappears), all hdc?
stays, but hdc still is not there. File devices.tar.bz2 is updated by
system and it has not hdc.
What else can I do?
Not use the tarball option?
I mean, seriously, are
(gentoo-sources, vanilla-sources)...
2005/9/17, Rumen Yotov [EMAIL PROTECTED]:
capsel wrote:
2005/9/17, Dave Nebinger [EMAIL PROTECTED]:
So for example lp* stays (it's another one that disappears), all hdc?
stays, but hdc still is not there. File devices.tar.bz2 is updated by
system and it has
As in subject - on every restart hdc, cdrom (link), dvd (link)
disappear from /dev
I'm using udev.
I haven't found anything about hdc in /etc/udev.
I don't know when exactly it stoped work, it worked after last emerge
-uDN world.
When I create /dev/hdc it stays for one reboot.
These values I've
On 9/16/05, Dave Nebinger [EMAIL PROTECTED] wrote:
When I create /dev/hdc it stays for one reboot.
These values I've got in /etc/conf.d/rc:
RC_DEVICES=udev
RC_DEVICE_TARBALL=yes
hdc is a cdrom on my laptop. What can cause this?
Turn off the tarball option, or create /dev/hdc and
fine, thanks for help :)
Should I post a bug with solved status or not?
On 9/9/05, Mariusz Pękala [EMAIL PROTECTED] wrote:
On 2005-09-09 11:30:55 +0200 (Fri, Sep), capsel wrote:
grub hangs while booting and there are no errors when I install it on
mbr (BIOS supports only mbr booting
Ok, now we're talking. When you enter Grub this way it doesn't care
about an existing configuration - so IMHO no problem there. Here's what
I would do:
1. Check if top shows reasonable results - if not step 3
2. Re-emerge grub - if that doesn't help - step 3
3. memtest86 for a day
I
Re-emerge and re-install Grub. If Grub hangs when you try to install
it, which I assume is what is happening, then you can try starting as: #
grub --no-floppy, to see if it works. Grub hanging basically implies
that there's a hardware hick up of some sort.
If Lilo works fine regardless
It is second time i'm posting about this problem on this group, maybe
I did it wrong last time...
so the problem is GRUB
it doesn't matter what partitions I have or how do I install it
(always successfull)
it still shows no memory at all (run grub from bash, delete grub,
put zeros where amount of
current:
hda1 swap
hda2 reiserfs /
---previous1---
hda1 ext2 /boot
hda2 reiserfs /
hda3 swap
---previous2---
hda1 swap
hda2 ext2 /boot
hda3 reiserfs /
swap is 258MB, /boot is about 24MB, / is rest of disk which is 10GB
Should I post output of echo -ne p\nq\n | fdisk /dev/hda?
device map:
(fd0)
please check it this is a flash animations proble. if it is then set
XLIB_SKIP_ARGB_VISUALS=yes
--
gentoo-user@gentoo.org mailing list
I have /boot with ext2 on hda1
/ with reiserfs hda2
swap on hda3
some time ago grub worked fine (maybe with different configuration of devices)
through last year I was using lilo (everywhere, on my servers too)
today I tryed to install grub on mbr:
root (hd0,0)
setup (hd0)
quit
it installed
I have /boot with ext2 on hda1
/ with reiserfs hda2
swap on hda3
some time ago grub worked fine (maybe with different configuration of devices)
through last year I was using lilo (everywhere, on my servers too)
today I tryed to install grub on mbr:
root (hd0,0)
setup (hd0)
quit
it installed
70 matches
Mail list logo