On Saturday 26 July 2008, Alan E. Davis wrote:
I want to express my joy at the result (except for some personal
errors, perhaps). This system runs MUCH faster, and more efficiently
than it did on Ubuntu. 1GB of RAM was often topped out on Ubuntu,
but on this machine even with four compiles
Alan
On Sat, Jul 26, 2008 at 4:30 PM, Alan McKinnon [EMAIL PROTECTED] wrote:
Congratulations and welcome to gentoo-land. It's quite a feat of
accomplishment to get through your very first gentoo install :-)
Actually, this about my fifth or sixth Gentoo install, but it was
quite a challenging
080726 Alan E. Davis wrote:
Jul 26, 2008 at 4:30 PM, Alan McKinnon [EMAIL PROTECTED] wrote:
Congratulations and welcome to gentoo-land. It's quite a feat of
accomplishment to get through your very first gentoo install :-)
Actually, this about my fifth or sixth, but it was quite challenging.
I
Alan E. Davis wrote:
Actually, this about my fifth or sixth Gentoo install, but it was
quite a challenging one.
I am pleased with the machine I have. While it's not a low end
machine, it isn't a high end workstation either. I have alot of HDD
space, 2GB of RAM. A dual core 2200 MHz Athlon
Hello.
My motherboard is an ASUS M2N-E. Not high end. And I have my doubts
about it at times. At first, especially, there were moments. It's
been less than six months. I got the MB as a kit with CPU and 1GB of
RAM. I have upgraded the RAM to 2GB as a kit of Dual Channel ram.
Earlier, I only
Alan E. Davis wrote:
Hello.
My motherboard is an ASUS M2N-E. Not high end. And I have my doubts
about it at times. At first, especially, there were moments. It's
been less than six months. I got the MB as a kit with CPU and 1GB of
RAM. I have upgraded the RAM to 2GB as a kit of Dual
Hi,
I recently installed Gentoo GNU/Linux 2008.0 (amd64, no-multilib) on
my HP Compaq A900 notebook which has Intel Core 2 Duo T5450 (1.6
GHz/EM64T) CPU. I've compiled a kernel myself using the configuration
generated by 'make menuconfig'[1]. In the new kernel, I noticed there
is no support for
On Friday 25 Jul 2008, s3b4sm4gr1 wrote:
I'm trying to get emerge world to complete after a recent --sync.
However, I get a series of error messages related to preserver libs and
I'm told to use this command:
emerge @preserved-rebuild
to resolve the problem. Repeated use of that
xorg.conf below. Note that driver changed to nv in order to run X.
If I try to use nvidia I get a blank screen and the machine locks.
I checked the Xorg.0.log file and the machine seems to have died before it
wrote anything.
Suggestions appreciated.
-Tracy
Section ServerLayout
Identifier
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Budd, Tracy wrote:
xorg.conf below. Note that driver changed to nv in order to run X.
If I try to use nvidia I get a blank screen and the machine locks.
I checked the Xorg.0.log file and the machine seems to have died before
it wrote anything.
Yes. I have the nvidia driver built, and it loads using modprobe.
-Original Message-
From: Chuck Robey [mailto:[EMAIL PROTECTED]
Sent: Sat 7/26/2008 3:03 PM
To: gentoo-user@lists.gentoo.org
Subject: Re: [gentoo-user] upgraded video card, nvidia drivers no longer work
-BEGIN PGP
Budd, Tracy wrote:
xorg.conf below. Note that driver changed to nv in order to run X.
If I try to use nvidia I get a blank screen and the machine locks.
I checked the Xorg.0.log file and the machine seems to have died
before it wrote anything.
Suggestions appreciated.
-Tracy
Two thoughts
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Budd, Tracy wrote:
Yes. I have the nvidia driver built, and it loads using modprobe.
I still think you might be confusing the kernel module, using modprobe to load,
with the X11 driver (you need both) which is named (as I wrote below)
nvidia_drv.so.
Hi
I've just tried to do a kernel upgrade from 2.6.25-gentoo-r4 to
2.6.26-gentoo. I coppied my existing config and did a make
oldconfig. The compile seemed to go without errors, but when I try
and boot the system hangs. The last output is
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports,
Yes. Tried re-emerging the drivers.
-Original Message-
From: Dale [mailto:[EMAIL PROTECTED]
Sent: Sat 7/26/2008 4:41 PM
To: gentoo-user@lists.gentoo.org
Subject: Re: [gentoo-user] upgraded video card, nvidia drivers no longer work
Budd, Tracy wrote:
xorg.conf below. Note that driver
Yes. I have nv loaded in my xorg.conf, because when I put nvidia in xorg.conf,
my machine crashes. That is the problem that I am having. nvidia in xorg.conf
used to work before I upgraded my card.
-Original Message-
From: Chuck Robey [mailto:[EMAIL PROTECTED]
Sent: Sat 7/26/2008 4:55
Budd, Tracy wrote:
Yes. Tried re-emerging the drivers.
Did you check to make sure you have the right version? From the error I
got recently, some cards require certain versions.
Dale
:-) :-)
As part of emerge -DuN system portage appears to first make me remove
python by hand. Is this safe?
Thanks,
Mark
dragonfly ~ # emerge -pvDuN -1 python-updater
These are the packages that would be merged, in order:
Calculating dependencies... done!
[ebuild U ] app-admin/python-updater-0.5
Mark Knecht wrote:
As part of emerge -DuN system portage appears to first make me remove
python by hand. Is this safe?
Thanks,
Mark
dragonfly ~ # emerge -pvDuN -1 python-updater
These are the packages that would be merged, in order:
Calculating dependencies... done!
[ebuild U ]
Dale wrote:
Mark Knecht wrote:
As part of emerge -DuN system portage appears to first make me remove
python by hand. Is this safe?
No! Not until you get a working version installed. Portage needs
python. Someone correct me if I misstep here:
emerge the new python, run the python updater
I have a machine thats sudeenly lost its console sessions. I dont think
its the kernel as the config looks ok, and it *used to work*. Its fine
on bootup, but once X starts, switching to a console just gives a blank
screen.
Its a radeon video card using the radeon driver if that makes a
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Budd, Tracy wrote:
Yes. I have nv loaded in my xorg.conf, because when I put nvidia in
xorg.conf,
my machine crashes. That is the problem that I am having. nvidia in xorg.conf
used to work before I upgraded my card.
OK, then, the next thing to do
William Kenworthy wrote:
I have a machine thats sudeenly lost its console sessions. I dont think
its the kernel as the config looks ok, and it *used to work*. Its fine
on bootup, but once X starts, switching to a console just gives a blank
screen.
Its a radeon video card using the radeon
On Sat, Jul 26, 2008 at 4:20 PM, Nikos Chantziaras [EMAIL PROTECTED] wrote:
Dale wrote:
Mark Knecht wrote:
As part of emerge -DuN system portage appears to first make me remove
python by hand. Is this safe?
No! Not until you get a working version installed. Portage needs python.
Mark Knecht wrote:
On Sat, Jul 26, 2008 at 4:20 PM, Nikos Chantziaras [EMAIL PROTECTED] wrote:
Dale wrote:
Mark Knecht wrote:
As part of emerge -DuN system portage appears to first make me remove
python by hand. Is this safe?
No! Not until you get a working version
On Sat, Jul 26, 2008 at 6:18 PM, Dale [EMAIL PROTECTED] wrote:
Mark Knecht wrote:
On Sat, Jul 26, 2008 at 4:20 PM, Nikos Chantziaras [EMAIL PROTECTED]
wrote:
Dale wrote:
Mark Knecht wrote:
As part of emerge -DuN system portage appears to first make me remove
python by hand. Is this
On Sat, Jul 26, 2008 at 6:34 PM, Mark Knecht [EMAIL PROTECTED] wrote:
On Sat, Jul 26, 2008 at 6:18 PM, Dale [EMAIL PROTECTED] wrote:
Mark Knecht wrote:
On Sat, Jul 26, 2008 at 4:20 PM, Nikos Chantziaras [EMAIL PROTECTED]
wrote:
Dale wrote:
Mark Knecht wrote:
As part of emerge -DuN
On Sat, 26 Jul 2008 06:09:32 -0500
Dale wrote:
...[snip]...
That Tyan does sound interesting. I would LOVE to have a dual CPU
rig, especially if they both have dual cores. I still remember when
Leo on the Screen Savers built a dual CPU rig.
Since I run folding 24/7 here, that would be
Mark Knecht wrote:
It's almost exactly the question I Came back to ask. Thanks.
I finished the python emerge and saw the message about running
python-updater. Before doing that I tried the emerge -pvDuN
python-updater and saw it still wanted me to remove the old python. I
am running
Mark Knecht wrote:
Humm. I seem to be stuck at this one. python-updater is complaining
about vte which is used by gnome and gnome-terminal. I tried unmasking
vte in package.keywords but I still get the same error:
* Adding to list: =games-board/pysol-sound-server-3.01
* Adding to list:
On Sat, Jul 26, 2008 at 7:11 PM, Dale [EMAIL PROTECTED] wrote:
Mark Knecht wrote:
Humm. I seem to be stuck at this one. python-updater is complaining
about vte which is used by gnome and gnome-terminal. I tried unmasking
vte in package.keywords but I still get the same error:
* Adding to
Thanks, its an R280 (9200) on an old athlon - but I'll give the upgrade
a go.
BillK
On Sun, 2008-07-27 at 03:50 +0300, Nikos Chantziaras wrote:
William Kenworthy wrote:
I have a machine thats sudeenly lost its console sessions. I dont think
its the kernel as the config looks ok, and it
Mark Knecht wrote:
On Sat, Jul 26, 2008 at 7:11 PM, Dale [EMAIL PROTECTED] wrote:
Mark Knecht wrote:
Humm. I seem to be stuck at this one. python-updater is complaining
about vte which is used by gnome and gnome-terminal. I tried unmasking
vte in package.keywords but I still get the
On Sun, Jul 27, 2008 at 3:15 AM, Mark Knecht [EMAIL PROTECTED] wrote:
[snip]
Nothing mysterious there, python-updater was trying to rebuild
vte-0.16.12, which doesn't exist in the portage tree anymore.
#emerge --update --oneshot vte
then re-run python-updater, and you'll be fine.
--Joe
--
On Sat, Jul 26, 2008 at 7:23 PM, Qian Qiao [EMAIL PROTECTED] wrote:
On Sun, Jul 27, 2008 at 3:15 AM, Mark Knecht [EMAIL PROTECTED] wrote:
[snip]
Nothing mysterious there, python-updater was trying to rebuild
vte-0.16.12, which doesn't exist in the portage tree anymore.
#emerge --update
On Sun, Jul 27, 2008 at 11:46 AM, David Relson [EMAIL PROTECTED] wrote:
A few years back I bought a Tyan SMP board (dual Athlon 1000's if I
recall). I was very pleased as it screamed through builds. Then
summer arrived, and with a computer room that gets warmish, I had lots
of cooling
I am seeing errors like this, and wonder if someone can suggest a solution:
(emacs:22548): GVFS-RemoteVolumeMonitor-WARNING **: cannot connect to
the session bus: org.freedesktop.DBus.Error.NoReply: Did not receive a
reply. Possible causes include: the remote application did not send a
reply, the
William Kenworthy wrote:
Thanks, its an R280 (9200) on an old athlon - but I'll give the upgrade
a go.
I don't think it will help on R280 (and it's not worth the hassle as
xf86-video-ati 6.9.0 pulls in many ~arch packages (maybe [M] too even).
As a starter, comment out every fancy stuff in
Mark Knecht wrote:
On Sat, Jul 26, 2008 at 7:23 PM, Qian Qiao [EMAIL PROTECTED] wrote:
On Sun, Jul 27, 2008 at 3:15 AM, Mark Knecht [EMAIL PROTECTED] wrote:
[snip]
Nothing mysterious there, python-updater was trying to rebuild
vte-0.16.12, which doesn't exist in the portage tree anymore.
I've had some trouble in the past with cfg-update although it sure is
easy. After a recent upgrade to a new portage, or so I assume, I was asked
to decide what to do about a config file change to an entirely new system:
OpenRC. Not sure what to do, I probably bodged that.
Now I receive this
On Sun, 27 Jul 2008 13:09:45 +1000
Alan E. Davis [EMAIL PROTECTED] wrote:
I've had some trouble in the past with cfg-update although it sure
is easy. After a recent upgrade to a new portage, or so I assume, I
was asked to decide what to do about a config file change to an
entirely new
Here it is.
Xorg.0.log below
Any help deciphering this is appreciated.
-Tracy
X Window System Version 1.3.0
Release Date: 19 April 2007
X Protocol Version 11, Revision 0, Release 1.3
Build Operating System: UNKNOWN
Current Operating System: Linux unegen 2.6.24-gentoo-r8 #3
On 2008-07-26, Dale [EMAIL PROTECTED] wrote:
emerge the new python, run the python updater and let it emerge whatever
packages it needs to rebuild, check to make sure nothing still needs the
old version and then you can unmerge the old one.
Be warned: running python-updater can take a long
Hi,
Please, let us know the driver version and the card model.
--
Jesús Guerrero [EMAIL PROTECTED]
pgp7CG9WuzLeS.pgp
Description: PGP signature
44 matches
Mail list logo