Thats seems a good configuration, but what about /etc/hostname? thats
what im not sure of, how to set what the box sees as its own hostname,
without setting it to the domain (because thats the router/network),
but still with Postfix and apache running.
I guess I can use the config files for them
Hi!
It's hard to help you if you don't provide more
info. /etc/cups/printers.conf and /etc/samba/smb.conf for a start?
Regards
spox
Am Freitag, den 13.05.2005, 10:20 +1000 schrieb Richard Watson:
Hi - I'm trying to get my Gentoo machine to print to a hp1210 psc printer
using Samba. The
Am Freitag, 13. Mai 2005 08:40 schrieb ext THUFIR HAWAT:
when you say that Gentoo installs on the partition of my choice, how
does that happen: with a gui, drop-down menu or what?
There is no installer for Gentoo. You boot from a LiveCD and type commands
into a shell. That's how Gentoo is
I already have Postfix running and I happily read email on my server,
but I'd like to read my email on my IMAP/SSL cellphone client. I've seen
Courier, UW, and Cyrus, and perhaps there are others. Any
recommendations, for or against?
Currently I'm the only user, but I host about a dozen friend's
On Fri, 2005-05-13 at 02:40, THUFIR HAWAT wrote:
when you say that Gentoo installs on the partition of my choice, how
does that happen: with a gui, drop-down menu or what? I don't mind
formating the fat32/vfat partition to ext3 (or whatever gentoo uses).
My primary concern is losing data on
On Fri, 13 May 2005 02:08:54 -0400, Calvin Spealman wrote:
Thats seems a good configuration, but what about /etc/hostname? thats
what im not sure of, how to set what the box sees as its own hostname,
without setting it to the domain (because thats the router/network),
but still with Postfix
Am Donnerstag, 12. Mai 2005 21:10 schrieb ext [EMAIL PROTECTED]:
[Something about IMAP in an unrelated thread]
Please stop thread hijacking.
Thanks...
Dirk
--
Dirk Heinrichs | Tel: +49 (0)162 234 3408
Configuration Manager | Fax: +49 (0)211 47068 111
Capgemini
On Thu, 12 May 2005 12:47:36 -0700, Mark Knecht wrote:
As for proceeding with the emerge world operation I don't think
there's any particular order you need to go in. The order shown is the
was portage would handle it if you let it do it as one big group. I
often opt for doing 5-10
Am Freitag, 13. Mai 2005 10:23 schrieb ext Zeno Davatz:
I took the /proc/config.gz from the chrooted and mounted system and
compiled a new kernel off it. I made sure that all the SATA drivers
are (*) and not (M).
No, you didn't. All (!?) hardware drivers are M, they (or better, the one
for
Hi Neil,
on Thursday, 2005-05-12 at 22:18:23, you wrote:
I'm running ~amd64 and ~ppc. I don't know if it's in the older
baselayout, but there are a lot of differences between testing and stable
baselayouts.
My RC_NET_STRICT_CHECKING had been set to no already, and I don't have support
for the
Yes, sorry, your are right. To much configuring in my brain.
Check the new config. I suppose I only need the Intel PII/ICH SATA
support (as my lspci tells me).
But I get the same result; a Kernel Panic VFS not found (8,3)... but
my HDD is on /dev/sda3.
Is there any why I can get more detailed
On Thursday 12 May 2005 19:09, Richard Fish wrote:
Paul wrote:
On Thursday 12 May 2005 15:22, Richard Fish wrote:
Paul wrote:
Hi all,
I posted this problem a few weeks ago and had no replies. I have tried
all sorts including re-installation of xine-lib 1.0-r2 and xine-ui
0.99.3 but I
On Thu, 2005-05-12 at 23:55 +0200, Christoph Gysin wrote:
Old ebuilds are avaible from viewcvs:
http://www.gentoo.org/cgi-bin/viewcvs.cgi/*checkout*/net-dialup/isdn4k-utils/isdn4k-utils-3.2_p1-r2.ebuild
Copy it to /usr/portage/net-dialup/isdn4k-utils/ and run:
#
I recently did my first-in-a-long-while emerge world. Now, when I
click a link in Thunderbird nothing happens. I'd like the link to be
opened in Firefox (of course). I'm using KDE.
Any ideas?
--
Arran
--
gentoo-user@gentoo.org mailing list
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Grant wrote:
I'm trying to track down my apache2 segfaults and the mod_perl guys
are telling me I need to get my system to dump a core file for
analysis. How can I do that? Should I re-emerge apache2 and apr with
+debug?
Unfortunately just
Hi All, I am having a little doubt about qt and kde user flags, I am
using Gnome in my system but I like some kde programs, so I have gtk
and gnome flag, should I use kde and qt flags to or should I put the
-kde and -qt ?
--
gentoo-user@gentoo.org mailing list
On 5/13/05, Neil Bothwick [EMAIL PROTECTED] wrote:
On Thu, 12 May 2005 12:47:36 -0700, Mark Knecht wrote:
As for proceeding with the emerge world operation I don't think
there's any particular order you need to go in. The order shown is the
was portage would handle it if you let it do
On Fri, 13 May 2005 05:27:25 -0700, Mark Knecht wrote:
Doing it this way will mess up your world file.
Mess up?
Yes, by adding packages that shouldn't be there.
Most of the packages in
the list are dependencies that should be in world themselves.
Should be in world...
Sorry, that
ok, will try. I'm starting from scratch again. I managed to boot twice
;)) but then I changed something in /etc/rc.conf and now no more boot
but only Kernel Panics.
What is the name of the PATA driver? My Primary IDE is PATA. My CD-Rom
is attached to that. My secondary IDE is SATA.
This is so
On 5/13/05, Neil Bothwick [EMAIL PROTECTED] wrote:
Sorry, that should have read should not be in world...
OK, that helps.
with the result that if
you uninstall the package that required them in the first place, they
will remain as useless cruft on your system and not be cleaned
On Tue, May 10, 2005 at 07:04:47PM +0200, Patrick wrote
Hi,
I'm trying to get smaller fonts at boot time like the live cd
Actually, you can do that on a plain ordinary text console. See my
webpage http://www.waltdnes.org/tips_and_tricks/textmodes.html
Here's a snippet from my make
Hi All,
When i update gcc
with
emerge --update gcc...it fails (the end part of the message is below).
Thanks in advance for any help/clue.
Kumar
===
* Configuring GCC with:
--enable-version-specific-runtime-libs
--prefix=/usr
Arran Fraser wrote:
I recently did my first-in-a-long-while emerge world. Now, when I
click a link in Thunderbird nothing happens. I'd like the link to be
opened in Firefox (of course). I'm using KDE.
Any ideas?
--
Arran
Try something like this...
$EDITOR ~/.thunderbird/default pref
That was it.
Thanks Alin,
Sasha
Reinstall mozilla, but this time make sure that you don't have any
existing mozilla processes running while installing the new version.
I have a problem with recently emerged Mozilla (1.7.7)
Selecting Advanced or Scripts Plug-ins in Edit-Preferences
results
On Fri, 13 May 2005 15:18:22 +0100, Russ Brown wrote:
Say I run emerge -pvD world, and ten packages pop out.
I look at the list and decide that I want to emerge all but one of the
things on the list.
How do I go about this without running an emerge command with nine
packages passed to
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
I have a real need for a terminal client program for gentoo that will
allow me to connect to a Windows machine. I know Mandrake (Mandriva)
has one which works very nicely, but I would really like to be able
to use gentoo.
Can anybody tell me what I
emerge -s rdesktop
* net-misc/grdesktop
Latest version available: 0.22-r1
Latest version installed: [ Not Installed ]
Size of downloaded files: 418 kB
Homepage:http://www.nongnu.org/grdesktop/
Description: Gtk2 frontend for rdesktop
License: GPL-2
*
Ok, thanks for all your help, I found out: it was a faulty (new !! SATA disk).
Thanks again
Zeno
On 5/13/05, Dirk Heinrichs [EMAIL PROTECTED] wrote:
Am Freitag, 13. Mai 2005 12:03 schrieb ext Zeno Davatz:
Yes, sorry, your are right. To much configuring in my brain.
Check the new config. I
Neil Bothwick wrote:
On Fri, 13 May 2005 15:18:22 +0100, Russ Brown wrote:
Say I run emerge -pvD world, and ten packages pop out.
I look at the list and decide that I want to emerge all but one of the
things on the list.
How do I go about this without running an emerge command with nine
On 5/13/05, Russ Brown [EMAIL PROTECTED] wrote:
Neil Bothwick wrote:
On Fri, 13 May 2005 15:18:22 +0100, Russ Brown wrote:
Say I run emerge -pvD world, and ten packages pop out.
I look at the list and decide that I want to emerge all but one of the
things on the list.
How do I go
I'm trying to track down my apache2 segfaults and the mod_perl guys
are telling me I need to get my system to dump a core file for
analysis. How can I do that? Should I re-emerge apache2 and apr with
+debug?
Unfortunately just having USE=debug isn't all that you need. I use a bash
On Fri, 13 May 2005, tj wrote:
Sorry for the newb post here.
I figured out what I screwed up. I have an e100 and I didn't get it into
my kernel.
Do i have to recompile? or? is there are way around it.
- tj
Hi,
Just a small side-note: On this list the bottom-post is the accepted
Hello, I need to figure out which version of mod_perl I'm running and
the mod_perl guys are telling me to run t/REPORT. I don't seem to
have t/report or t/REPORT anywhere on my system though. What is the
Gentoo equivalent of this?
- Grant
--
gentoo-user@gentoo.org mailing list
On Fri, 13 May 2005 08:37:34 -0700, Mark Knecht wrote:
Neil said he dealt with the pain of this. I'd like to learn how to go
about it. I have learned this morning that I probably have 5 machines
that need to be looked after WRT this issue.
I did it manually, editing the world file to remove
On 5/13/05, Neil Bothwick [EMAIL PROTECTED] wrote:
On Thu, 12 May 2005 12:47:36 -0700, Mark Knecht wrote:
As for proceeding with the emerge world operation I don't think
there's any particular order you need to go in. The order shown is the
was portage would handle it if you let it do
On 5/13/05, Bruno Lustosa [EMAIL PROTECTED] wrote:
There used to be an applet in GNOME to notify the user of new mail.
Now I can't find it. Has it moved into a separate package?
Using gnome 2.10 here.
Never mind... found it:
emerge -s mail-notification
Searching...
[ Results for search key :
Thanks for the quick responses.
I loaded the module and moved the kernel over.
I had to then run lsmod to make sure and then modprobe and get it into
the autoload.
works great.
now to get Gnome and KDE on the machine :)
- tj
*note - i will bottom post from now on- sorry :)
Mark Knecht
* On May 13 9:06, Mark Knecht (gentoo-user@lists.gentoo.org) wrote:
My world file is 235 lines long. How screwed up is that really? How
long it yours?
My world file is 135 lines, and I run a fairly minimalist desktop system
(no DE, just good ole fvwm). For a system with kde, gnome, and
Hello, I need to figure out which version of mod_perl I'm running and
the mod_perl guys are telling me to run t/REPORT. I don't seem to
have t/report or t/REPORT anywhere on my system though. What is the
Gentoo equivalent of this?
Nevermind, mp2bug was what I needed.
- Grant
--
[EMAIL PROTECTED] wrote:
I already have Postfix running and I happily read email on my server,
but I'd like to read my email on my IMAP/SSL cellphone client. I've seen
Courier, UW, and Cyrus, and perhaps there are others. Any
recommendations, for or against?
Currently I'm the only user, but I host
Quoting Grant [EMAIL PROTECTED]:
Actually, is hdparm supposed to be used when specific IDE support is
not included in the kernel? It sounds like the kernel optimally
configures your device if that support is included. hdparm sounds
like it does the same thing.
My understanding is that the kernel
On May 13, 2005, at 3:46 pm, Neil Bothwick wrote:
On Fri, 13 May 2005 15:18:22 +0100, Russ Brown wrote:
Say I run emerge -pvD world, and ten packages pop out.
I look at the list and decide that I want to emerge all but one of the
things on the list.
How do I go about this without running an emerge
Actually, is hdparm supposed to be used when specific IDE support is
not included in the kernel? It sounds like the kernel optimally
configures your device if that support is included. hdparm sounds
like it does the same thing.
My understanding is that the kernel will automagically
If using Firefox (compiled) as a browser should I still be using the
mozilla USE flag? This flag is still hanging about from when I used
Mozilla. Removing it seems to effect other things like Blackdown Java
which is probably used on this system by Firefox so I'm not sure of
the best state for this
You might look at rdesktop or tightvnc.
From: Mike Noble [EMAIL PROTECTED]
Date: 2005/05/13 Fri AM 11:04:08 EDT
To: Gentoo Users gentoo-user@lists.gentoo.org
Subject: [gentoo-user] Terminal Client
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
I have a real need for a terminal client
* On Fri May-13-2005 at 10:41:19 AM -0500, tj said:
Sorry for the newb post here.
I figured out what I screwed up. I have an e100 and I didn't get it into
my kernel.
Do i have to recompile? or? is there are way around it.
[I'm going to assume you used the 2005.0 CD and installed a 2.6
Hi,
It is my understanding that even if you disable those flags
(-kde -qt) and you try to emerge a package that depends
on kde and qt libraries, those will be compiled as well.
As an example, I am running xfce4 (gtk2) and my use flags have
-kde -qt, if I try to emerge k3b, it shows that it
I'm trying to try the mod_perl-2.0.0-rc4 ebuild posted here:
http://bugs.gentoo.org/show_bug.cgi?id=77551
but when I try to generate the digest or emerge it from the overlay I get:
No digest file available and download failed.
There is also a mod_perl.patch posted a week after the ebuild. How
Jaap van Geffen wrote:
It worked allright except that emerge wants to have
/usr/portage/net-dialup/isdn4k-utils/files/3.2_p1-r2/gentoo.patch
Any idea where to find it ?
Have a look at:
http://www.gentoo.org/cgi-bin/viewcvs.cgi/net-dialup/isdn4k-utils/files/
All obsolete files are still
Arran Fraser wrote:
I recently did my first-in-a-long-while "emerge world". Now, when I
click a link in Thunderbird nothing happens. I'd like the link to be
opened in Firefox (of course). I'm using KDE.
Any ideas?
--
Arran
Something similar here. I'm getting an error dialog
Thanks for the explanention, so if I do not use the flags all should
be ok, and If I use the flag too I still won't have problems :)
On 5/13/05, A. R. [EMAIL PROTECTED] wrote:
Hi,
It is my understanding that even if you disable those flags
(-kde -qt) and you try to emerge a package that
I have set the anoymous_enable=YES in vsftp.conf, but it still is not
accepting anonymous users. I have also restarted the server. I have
tried both anonymous and ftp, using valid e-mail addresses as
passwords. Is there another step I am missing to properly enable this?
--
gentoo-user@gentoo.org
q-parser wrote:
Arran Fraser wrote:
I recently did my first-in-a-long-while emerge world. Now, when I
click a link in Thunderbird nothing happens. I'd like the link to be
opened in Firefox (of course). I'm using KDE.
Something similar here. I'm getting an error dialog saying: Epiphany
On Fri, May 13, 2005 5:06 pm, Mark Knecht said:
My world file is 235 lines long. How screwed up is that really? How
long it yours?
It's not thye length, it's the amount of unnecessary content. But the
world file on my laptop is 139 lines.
Just glancing through the file I spot very few things
On Fri, May 13, 2005 5:30 pm, Mark Knecht said:
On 5/13/05, Neil Bothwick [EMAIL PROTECTED] wrote:
This should do it, but it's a QAD kludge I haven't tested.
cat /var/lib/portage/world | while read p; do [ $(qpkg -I -nc -q $p |
wc -l) -eq 2 ] echo $p; done
Thanks. If I can trust the
Andrew Gaffney wrote:
q-parser wrote:
Arran Fraser wrote:
I recently did my first-in-a-long-while "emerge world". Now, when I
click a link in Thunderbird nothing happens. I'd like the link to be
opened in Firefox (of course). I'm using KDE.
On Fri, May 13, 2005 5:32 pm, Thomas Kirchner said:
* On May 13 9:06, Mark Knecht (gentoo-user@lists.gentoo.org) wrote:
My world file is 235 lines long. How screwed up is that really? How
long it yours?
My world file is 135 lines, and I run a fairly minimalist desktop system
(no DE, just
* On May 13 20:30, Neil Bothwick (gentoo-user@lists.gentoo.org) wrote:
emerging kde, gnome and fluxbox instead of fvwm would oonly make the
world file two lines longer :)
If you only install the meta-ebuilds, that's true... Perhaps I should
have prefaced it with a 'YMMV', but if you have
Man ebuild
Also, check out the Gentoo docs on ebuilds and look at some existing ones as
guides.
From: Grant [EMAIL PROTECTED]
Date: 2005/05/13 Fri PM 01:55:53 EDT
To: Gentoo mailing list gentoo-user@lists.gentoo.org
Subject: [gentoo-user] 3rd party ebuild help (mod_perl)
I'm trying to
Go to /home/name/.thunderbird/9qflya66.default(yours may be
different)prefs.js and add this;
user_pref(network.protocol-handler.app.http, /usr/bin/firefox);
user_pref(network.protocol_handler.app.ftp, usr/bin/firefox);
user_pref(network.protocol_handler.app.https, /usr/bin/firefox);
--
On Fri, 2005-05-13 at 07:56 -0600, Kumar Golap wrote:
/var/tmp/portage/gcc-3.3.5.20050130-r1/work/build using mt-frag
gcc: installation problem, cannot exec `as': No such file or directory
*** The command '/usr/bin/gcc -o conftest -O2 -march=pentium3
conftest.c' failed.
*** You must set the
Hi,
I emerged the game Slune, but when I try to run
slune from the command line, I get the following
error
/usr/lib/python2.3/site-packages/soya/model.py:20:
DeprecationWarning: The content of this module is now
in the soya module.
warnings.warn(The content of this module is now in
the soya
Recently xmms stopped working. It will launch, but it
won't play anything. I try to play a file and nothing
happens, I try to play an internet stream and I get a file
dialog. I think it broke in the upgrade from 1.2.10-r13 to
1.2.10-r5. Suggestions?
Does it simply not produce audio
On Fri, May 13, 2005 at 10:50:14PM +0200, Christoph Eckert wrote:
Recently xmms stopped working.
[...]
Does it simply not produce audio output (but show the loaded
file and activity in the level meter), or does it even not
show the loaded file?
No activity, does not show the loaded
No activity, does not show the loaded file.
So I'm sorry. I expected that it is somehow related to the
chosen output plugin or to the sound system.
Best regards
ce
--
gentoo-user@gentoo.org mailing list
On Fri, May 13, 2005 8:43 pm, Thomas Kirchner said:
* On May 13 20:30, Neil Bothwick (gentoo-user@lists.gentoo.org) wrote:
emerging kde, gnome and fluxbox instead of fvwm would only make the
world file two lines longer :)
If you only install the meta-ebuilds, that's true... Perhaps I should
After upgrading to apache-2.0.54 dispach-conf left this code: in
my /etc/conf.d/apache2:
...
/etc/conf.d/apache2
APACHE2_OPTS=-D SSL -D PHP4
#===
#APACHE2_OPTS=-D SSL -D DOC
/etc/conf.d/._cfg_apache2
...
Was pressing u too fast?
Commenting out the first and last line solved the problem.
A. R. schreef:
On 5/13/05, Allan Spagnol Comar [EMAIL PROTECTED] wrote:
Hi All, I am having a little doubt about qt and kde user flags, I am
using Gnome in my system but I like some kde programs, so I have gtk
and gnome flag, should I use kde and qt flags to or should I put the
-kde and -qt ?
On 5/13/05, Phil Sexton [EMAIL PROTECTED] wrote:
[..]
By commands, actually. You can even install Gentoo from your
running Fedora installation, or from a Linux Live CD such as
Knoppix.
[..]
I was hoping for a screen shot to compare against anaconda.
The Gentoo Installation CDs are bootable
Ian K wrote:
grep: /usr/lib/gcc-lib/i686-pc-linux-gnu/3.3.4/libstdc++.la: No such
file or directory
/bin/sed: can't read
/usr/lib/gcc-lib/i686-pc-linux-gnu/3.3.4/libstdc++.la: No such file or
directory
libtool: link: `/usr/lib/gcc-lib/i686-pc-linux-gnu/3.3.4/libstdc++.la'
is not a valid libtool
Hello,
I've just requested an ebuild package for 'jffnms' which is a system/network
management tool. I'm not sure I made the request properly, nor what to do,
if anything concerning the request I've gotten some email from the
bugzilla daemon, but I'm not sure I need to do anything.
Anyone care
snip
So do I do anything or just read the emails and wait/watch?
Got it in one. if an ebuild is attached to the thread, you could test it
by placing it into your portage overlay. But if your not sure, you'd be
best just watching.
The reason for the emails is to keep you informed
James wrote:
So do I do anything or just read the emails and wait/watch?
The emails inform you about the status of the request. Every change will
generate a mail to you. You can customize your preferences on bugzilla
if you don't want to be informed of some events.
In the first mail, the
On Thu, 2005-05-12 at 21:12 -0700, Mark Knecht wrote:
No, it's something more nefarious than that
1) All machines have the same hosts file. None of the machines are using dhcp.
2) The FC2 client logs into both Gentoo and FC2 hosts fast
3) The Gentoo client logs into both Gentoo and
hi guys,
I have phppgadmin 3.5.1 and ti doesn't recognize my password in any
way. I've looked at config.inc.php and the file is OK. I also tried to
disable extra security but I can't connect even with postgres what
should works.
If I try to connect by psql I get no problem, or even if I try to
Peter Gordon wrote:
Ian K wrote:
grep: /usr/lib/gcc-lib/i686-pc-linux-gnu/3.3.4/libstdc++.la: No such
file or directory
/bin/sed: can't read
/usr/lib/gcc-lib/i686-pc-linux-gnu/3.3.4/libstdc++.la: No such file or
directory
libtool: link:
Christoph Gysin cgysin at gmx.ch writes:
James wrote:
So do I do anything or just read the emails and wait/watch?
The emails inform you about the status of the request. Every change will
generate a mail to you. You can customize your preferences on bugzilla
if you don't want to be
hi guys,
I have phppgadmin 3.5.1 and ti doesn't recognize my password in any
way. I've looked at config.inc.php and the file is OK. I also tried to
disable extra security but I can't connect even with postgres what
should works.
If I try to connect by psql I get no problem, or even if I try to
On 5/13/05, THUFIR HAWAT [EMAIL PROTECTED] wrote:
On 5/14/05, Mark Knecht [EMAIL PROTECTED] wrote:
[..]
Thufir,
I think the point you may be missing here is that there is
NOTHING graphical about the Gentoo installation. It is nothing
more than a very carefully crafted set of text
Kent Borg wrote:
Recently xmms stopped working. It will launch, but it won't play
anything. I try to play a file and nothing happens, I try to play an
internet stream and I get a file dialog. I think it broke in the
upgrade from 1.2.10-r13 to 1.2.10-r5. Suggestions?
Have you recently
Thanks for the excellent advice, Jonathan. Yes, I figured I'd have to
move out of mbox sooner or later. I wonder if there are tools to convert
mbox files to maildir format - I would guess yes.
Michael
On Fri, 13 May 2005, Jonathan Nichols wrote:
[EMAIL PROTECTED] wrote:
I already have Postfix
81 matches
Mail list logo
