Justin R Findlay schrieb:
On Wed, Aug 02, 2006 at 05:40:17PM -0700, Richard Fish wrote:
Well the main reason is because profiles will disappear from portage
after a certain amount of time, and you can't really run without a
profile!!
Right, but I still don't understand why it doesn't auto
Alexander Skwar wrote:
Justin R Findlay schrieb:
On Wed, Aug 02, 2006 at 05:40:17PM -0700, Richard Fish wrote:
Well the main reason is because profiles will disappear from portage
after a certain amount of time, and you can't really run without a
profile!!
Right, but I still don't understand
On Thu, Aug 03, 2006 at 08:05:52AM +0200, Alexander Skwar wrote:
And because of lazy people, other people have to suffer?
Yes. Otherwise I'd think you were discriminataing against me and I'd
have to leave gentoo for another distro with loud exclamations of
disgust.
I don't think that this is
On Wed, 2006-08-02 at 21:55 -0600, Justin R Findlay wrote:
On Wed, Aug 02, 2006 at 05:40:17PM -0700, Richard Fish wrote:
Well the main reason is because profiles will disappear from portage
after a certain amount of time, and you can't really run without a
profile!!
Right, but I still
Hi,
does somebody know if app-office/openoffice-bin supports native look and
feel for kde? Or would I have to emerge app-office/openoffice with
KDE-useflag?
Best Regards
Sebastian Noack
--
gentoo-user@gentoo.org mailing list
On Thursday 03 August 2006 12:14, Noack, Sebastian wrote:
Hi,
does somebody know if app-office/openoffice-bin supports native look
and feel for kde? Or would I have to emerge app-office/openoffice
with KDE-useflag?
The icons, to me, look KDE-ish.
--
Hi,
does somebody know if app-office/openoffice-bin supports native look
and feel for kde? Or would I have to emerge app-office/openoffice
with KDE-useflag?
The icons, to me, look KDE-ish.
Yeah, that is what I probably mean. I have seen OpenOffice on my mum's
notebook on which runs
On Thu, 3 Aug 2006 09:24:25 +0200, Noack, Sebastian wrote:
ut even if office/openoffice-bin have kde-support, how would I tell it
to use kdelibs instead of gtk+? Because of both libraries are present on
my system.
You shouldn't need to, OOo detects which desktop it is running on and
uses the
Hi,
Today I executed my daily 'eix-sync -v'. At the end I got this:
# eix-sync output start
.
output snipped
.
* Running update-eix
Reading Portage settings ..
Building database (/var/cache/eix) from scratch ..
[0] /usr/portage/ (cache: metadata)
Reading 100%
On Thu, 03 Aug 2006 09:48:48 +0200, Jules Colding wrote:
Seamonkey is set to be updated in this emerge run. Why didn't emerge
offer to update seamonkey when I used the '-u' option in the first
emerge run??
It could be that neither seamonkey nor a dependent package is in your
world file. Does
On Thu, 2006-08-03 at 09:44 +0100, Neil Bothwick wrote:
On Thu, 03 Aug 2006 09:48:48 +0200, Jules Colding wrote:
Seamonkey is set to be updated in this emerge run. Why didn't emerge
offer to update seamonkey when I used the '-u' option in the first
emerge run??
It could be that neither
I have a hard time installing Gentoo 2006.0 using either the minimal
installation image or the LiveCD. The machine has a Asus A8V Deluxe
mainboard with onboard networking. Windows identifies the network
controller as Marvell Yukon 88E8001/8003/8010 PCI Gigabit Ethernet,
and Gentoo's lspci
El Jueves, 3 de Agosto de 2006 08:30, Justin R Findlay escribió:
On Thu, Aug 03, 2006 at 08:05:52AM +0200, Alexander Skwar wrote:
And because of lazy people, other people have to suffer?
Yes. Otherwise I'd think you were discriminataing against me and I'd
have to leave gentoo for another
On 8/3/06, Ralph Seichter [EMAIL PROTECTED] wrote:
variants, and lsmod lists the respective modules. After using net-setup
et0, ifconfig shows Link encap:UNSPEC and a weird hardware address.
IIRC, eth0 on the live CD can be a IEEE1394 ethernet bridge, if you
have a firewire port in the PC.
Hi Guys,
I know this is VERY OT. I have a Gentoo Server running at Home 24/7 and
there's a possiblity that it's really eating up my energy bill.
I've seen the Kill-A-Watt
http://www.thinkgeek.com/gadgets/electronic/7657/ but it's a 120V US
Version.
I'm looking for a 240V Version. Would anyone
Hi folks, i have an gentoo server on my network, I export the /home and its have quota enabled. But since yesterday, when the quota service are enabled, none user can anter any file on the remote filesystem, the message get is disk quota exceeded
I cant find any message on logs and when i start
Thiago Lüttig wrote:
/dev/sda4 /home ext3 defaults,quota,grpquota 1 2
Should not it be: defaults,usrquota,grpquota?
At least in my fstab it is so, and I'm having no problems...
Jarry
--
gentoo-user@gentoo.org mailing list
I think thats right.. but always been this way... i can figure out was wrongOn 8/3/06, Jarry [EMAIL PROTECTED] wrote:
Thiago Lüttig wrote: /dev/sda4 /homeext3defaults,quota,grpquota 1 2
Should not it be: defaults,usrquota,grpquota?At least in my fstab it is so, and I'm having no
On Thu, 2006-08-03 at 19:41 +0200, Jarry wrote:
Ow Mun Heng wrote:
I'm looking for a 240V Version. Would anyone here know where to get one?
I'm using this one (all in one line without spaces):
Problem fixed.
/etc/fstab had the root file system mounted with the users option, which
disabled the requisite setuid bit on the /bin/su executable, thereby
preventing me from su'ing to root from a non-root user. This was despite the
fact that the non-root user was in the wheel group.
Thanks
On Thursday 03 August 2006 07:51, Ralph Seichter wrote:
I have a hard time installing Gentoo 2006.0 using either the minimal
installation image or the LiveCD. The machine has a Asus A8V Deluxe
mainboard with onboard networking. Windows identifies the network
controller as Marvell Yukon
Ow Mun Heng wrote:
You're referring to the Energy Check 3000 or the Energy Monitor 3000?
I'm using Energy monitor 3000...
(What's the difference? I'm printing the manual to do a comparison
study)
I don't know, there was only EnergyMonitor3000 on stock, when
I went shopping so I bought it.
Hi,
Am Donnerstag, 03. Aug 2006, 00:48:25 +0200 schrieb Hemmann, Volker Armin:
On Wednesday 02 August 2006 23:37, Bertram Scharpf wrote:
Am Mittwoch, 02. Aug 2006, 00:04:52 +0200 schrieb Hemmann, Volker Armin:
On Monday 31 July 2006 21:07, Bertram Scharpf wrote:
# scantv
[...]
On 8/3/06, Ow Mun Heng [EMAIL PROTECTED] wrote:
On Thu, 2006-08-03 at 18:27 +, James wrote:
Ow Mun Heng Ow.Mun.Heng at wdc.com writes:
I know this is VERY OT. I have a Gentoo Server running at Home
24/7 and
there's a possiblity that it's really eating up my energy bill.
I've seen
Richard Fish wrote:
IIRC, eth0 on the live CD can be a IEEE1394 ethernet bridge, if you
have a firewire port in the PC. The UNSPEC and 'weird' hardware
address are indicative of this.
Good timing of yours, I just wanted to boast a bit about getting to the
bottom of the problem myself (after I
On Thu, 2006-08-03 at 13:47 -0500, billyd wrote:
On Thursday 03 August 2006 13:36, you wrote:
[snip]
Bill, just load forcedeth and it is going to work just fine.
modprobe forcedeth
much cheaper than paying extra $20.00 :-)
Thanks, Joseph, for that info. When I had my problem, I
billyd wrote:
His ultimate suggestion, which I followed, was to go out to your
favorite computer store, purchase a NIC card (about $20 US) off the
shelf, install it in your computer, and disable the on-board Marvell
Yukon controller in the BIOS.
A valid suggestion, of course. I would
On Thu, 2006-08-03 at 16:04 -0300, Daniel da Veiga wrote:
On 8/3/06, Ow Mun Heng [EMAIL PROTECTED] wrote:
Unfortunately, I'm not a US resident and I live in a Country where the
power comes in at 240V.
I live in a cowntry where energy comes at 240V (Brazil), but all
computers,
I have a laptop and when I initially setup the partitions I
anticipated that I would install Windoze along side of Linux for
gaming purposes, I now realize that this is never going to happen and
would like to change the partition type from NTFS to Linux Native. Is
it possible to do this without
On Thu, 2006-08-03 at 15:52 -0400, Michael Crute wrote:
I have a laptop and when I initially setup the partitions I
anticipated that I would install Windoze along side of Linux for
gaming purposes, I now realize that this is never going to happen and
would like to change the partition type
No problem!
Just reformat /dev/hda1. Doing this will not touch the other
partitions. Of course, if you are booting off of /dev/hda1 now, this is
problematic...
See the man page for mkfs for more info. Something like:
mkfs -t ext2 -m1 /dev/hda1
-Joe
Michael Crute wrote:
I
On Thu, 03 Aug 2006 10:25:41 -0700, Ow Mun Heng wrote:
I've seen the Kill-A-Watt
http://www.thinkgeek.com/gadgets/electronic/7657/ but it's a 120V US
Version.
I'm looking for a 240V Version. Would anyone here know where to get one?
I have a Brennenstuhl PM230, which seems to do the same
Is it possible to emerge python library packages (like egenix-mx-base,
psycopg, etc, etc, etc) for multiple versions of python (python2.3 and
python2.4 for instance)?
If so, how?
--
Edward Muller
Interlix, LLC
--
gentoo-user@gentoo.org mailing list
On Thursday 03 August 2006 23:52, Michael Crute wrote:
I have a laptop and when I initially setup the partitions I
anticipated that I would install Windoze along side of Linux for
gaming purposes, I now realize that this is never going to happen and
would like to change the partition type from
HiI tried to move to moidular X but it
failed so I roled everything back but I now have a problem that has me
stumped. When I do an emerge -puD world there are a whole slew of
packages that are blocked by a non existant package. I have xorg-x11
6.8.2-r8 installed not 6.9 but get the following in
On Thu, Aug 03, 2006 at 03:16:13PM -0500, Edward Muller wrote:
Is it possible to emerge python library packages (like egenix-mx-base,
psycopg, etc, etc, etc) for multiple versions of python (python2.3 and
python2.4 for instance)?
If so, how?
Not currently possible. We have an
On 8/3/06, Pete Pardoe [EMAIL PROTECTED] wrote:
=x11-base/xorg-x11-6.9 (is blocking
I have tried emerge --clean x11-base/xorg-x11-6.9 and emerge --prune
x11-base/xorg-x11-6.9 and they both tell me that the package is not there.
it is written = before package name, so 6.8 counts too
Mike Williams wrote:
On Thursday 03 August 2006 19:27, James wrote:
The simplist solution is NOBODY puts a 240 VAC power supply
into a computer unless it's going to draw some serious current
(amps) thus by the nature of it being 240 VAC, you already know
it is a power hog.
Now,
Pete Pardoe wrote:
I tried to move to moidular X but it failed so I roled everything back
but I
now have a problem that has me stumped.
You filed a bug for the failure, right? Monolithic X won't be around
forever ...
When I do an emerge -puD world
there are a whole slew of packages that
On Fri, Aug 04, 2006 at 12:43:26AM +0300, Mantas Povilaitis wrote:
On 8/3/06, Pete Pardoe [EMAIL PROTECTED] wrote:
=x11-base/xorg-x11-6.9 (is blocking
I have tried emerge --clean x11-base/xorg-x11-6.9 and emerge --prune
x11-base/xorg-x11-6.9 and they both tell me that the package is not
On Thu, 2006-08-03 at 15:09 -0700, Ow Mun Heng wrote:
I'm looking for some pointers in using sqsh.
The website - sqsh.org seems to be down.
I can't seem to locate a mailing list.
It works, but I would just like to know if I can get it to execute a
script from a file.
I know it has the
On 8/3/06, Dale [EMAIL PROTECTED] wrote:
Well, the USA has the same coming in too. We have 220v to 240v coming
in but that is split into different legs for the 110v to 120v stuff.
No, we don't. We have ~120V between a 'hot' wire and neutral, and
240V appliances work by using the two hot
Hello,
I recently got an HP 8000 laptop with any 9-pin serial ports.
I got a Entrega USB-to-serail cable.
lsusb sees the device:
Bus 003 Device 002: ID 046d:c01b Logitech, Inc. MX310 Optical Mouse
Bus 003 Device 001: ID :
Bus 002 Device 003: ID 1645:8003 Entrega [hex]
Bus 002 Device 001:
Richard Fish wrote:
On 8/3/06, Dale [EMAIL PROTECTED] wrote:
Well, the USA has the same coming in too. We have 220v to 240v coming
in but that is split into different legs for the 110v to 120v stuff.
No, we don't. We have ~120V between a 'hot' wire and neutral, and
240V appliances work by
On 8/3/06, James [EMAIL PROTECTED] wrote:
Hello,
I recently got an HP 8000 laptop with any 9-pin serial ports.
I got a Entrega USB-to-serail cable.
lsusb sees the device:
Bus 003 Device 002: ID 046d:c01b Logitech, Inc. MX310 Optical Mouse
Bus 003 Device 001: ID :
Bus 002 Device 003: ID
Booting the life-CD and starting the Gentoo-installer, there is no
possibility to set the date.
Regards
Frank
On Wed, 2006-08-02 at 18:01 -0400, Stephen wrote:
On Wednesday 02 August 2006 16:28, frank wrote:
Booting from the Gentoo liveCD 2006 puts my clock back for 2 hours.
Did you
Hi,
I will change my system from ATA to SATA.
Is there somethng special to consider for this in beforehand?
(...before I will not be able anymore to post to this list a
cry of help ... ;) :O) )))
Thank you very much in advance for any help!
mcc
--
gentoo-user@gentoo.org mailing list
Well, I currently have a system with both a PATA drive as well as a SATA
drive. SATA uses the whole SCSI subsystem which tends to cause things to
not always be in the same place from time to time, devicewise,
especially when you have USB mass storage peripherals elsewhere (like my
memcard reader).
48 matches
Mail list logo
