Hi,
On 10/29/06, Lord Sauron [EMAIL PROTECTED] wrote:
Be sure DRI is working. use glxinfo if you need to verify if it's active.
If you don't have DRI working, then most of the graphics will be done
on CPU. Or at least that's how my laptop did it.
well DRI in on and working:
display: :0
Hi Iain,
I think it can depend on the driver. With some versions of ati-drivers,
the CPU is used to help the GPU, and I get great frame rates. With
other version of ati-drivers (including 8.28.8 and 8.29.6) the cpu
usages stays low for all 3d, and I get crap framerates...
don't know if this
Hi,
I did my normal sync and then got a list of packages to upgrade. It
fails on app-crypt/gnupg-1.9.94 with the following:
checking if gcc supports -Wno-pointer-sign... yes
configure:
***
*** You need libgpg-error to build this program.
** This library is for example available at
***
On Monday 30 October 2006 11:19, Dale wrote:
[ snip]
*** ftp://ftp.gnupg.org/gcrypt/libgpg-error
*** (at least version 1.4 is required.)
[snip]
*** ftp://ftp.gnupg.org/gcrypt/alpha/libassuan/
*** (at least version 0.9.3 (API 1) is required).
***
configure: error:
***
***
Alan McKinnon wrote:
Both libraries you have are one version behind. DEPEND in the
gnupg-1.9.94 ebuild says it wants at least the version you do have, but
it's ./configure says different. This is a bug, you should report it.
Meanwhile a workaround is to simply emerge the versions of the
Hi,
Looks like the tree was busy over the weekend :-). My regular sync and
emerge world this morning results in just about every x11 package
wanting to be rebuilt. Lots of stuff like this:
[ebuild R ] x11-libs/xtrans-1.0.2 USE=X%* -debug 0 kB
[ebuild R ] x11-apps/mkfontdir-1.0.2
On 28 October 2006 23:39, Alan McKinnon wrote:
On Saturday 28 October 2006 16:41, b.n. wrote:
Dale ha scritto:
If you use XFS, make sure you have good power. XFS does not like
power failures at all. I have had to reinstall on a second rig
because of this very problem. If you have a
Dale wrote:
Alan McKinnon wrote:
Both libraries you have are one version behind. DEPEND in the
gnupg-1.9.94 ebuild says it wants at least the version you do have, but
it's ./configure says different. This is a bug, you should report it.
Meanwhile a workaround is to simply emerge
On Monday 30 October 2006 12:04, Uwe Thiem wrote:
On 28 October 2006 23:39, Alan McKinnon wrote:
On Saturday 28 October 2006 16:41, b.n. wrote:
Dale ha scritto:
If you use XFS, make sure you have good power. XFS does not
like power failures at all. I have had to reinstall on a
On Monday 30 October 2006 12:25, Dale wrote:
After looking through my package.keywords and package.unmask file, it
may have been a setting on my end. I usually keyword or unmask
specific versions which can catch up to me sometimes. I seem to
recall having to add those when KDE 3.5 came out.
Alan McKinnon wrote:
It certainly is a bug in the ebuild:
The ebuild requires versions x or later
The package itself requires versions x+1 or later
So the ebuild needs to be modified. Go on, file the bug and take the
credit :-)
alan
OK. I reported it. It's just that most errors
I think I have something more basic (i.e. hardware-related) than that. I've
tried installs of Fedora Core 6 and Mandriva Linux with the same result, and
both Lilo and Grub fail. I'm going to take out the raid card tonight and step
down to a single drive and see if I can get around the issue
On Monday 30 October 2006 11:01, Alan McKinnon wrote:
Hi,
Looks like the tree was busy over the weekend :-). My regular sync and
emerge world this morning results in just about every x11 package
wanting to be rebuilt. Lots of stuff like this:
[ebuild R ] x11-libs/xtrans-1.0.2 USE=X%*
Hi,
On Sat, 28 Oct 2006 18:50:21 -0700 Ryan Tandy
[EMAIL PROTECTED] wrote:
I'm not familiar with Live365, but I listen to radio
(http://kplu.org) and similar streams off the Internet sometimes, and
I find that mplayer is more than up to the task, including dealing
with pls files.
e.g.
$
Hi all,
I seem to be missing my loop devices in /dev...
And I don't find any docs on the current method to do this. I imagine
it's done with udev rules - anyone have working rules for this that
they'd be willing to share?
alan
--
gentoo-user@gentoo.org mailing list
On Monday 30 October 2006 14:02, Bo Ørsted Andresen wrote:
1. What's causing these packages to have an X use flag at all?
2. Why use such a flag at all? These are X11 packages, seems kinda
pointless to compile such a thing without X11 support...
The x-modular.eclass now inherits the
Why not to use mknod?
mknod b /dev/loop0 7 0
mknod b /dev/loop1 7 1
mknod b /dev/loop2 7 2
...
chgrp disk /dev/loop*
2006/10/30, Alan McKinnon [EMAIL PROTECTED]:
Hi all,
I seem to be missing my loop devices in /dev...
And I don't find any docs on the current method to do this. I imagine
it's
On Mon, 30 Oct 2006, at 15:04 +0200, Alan McKinnon wrote:
all, and none so far use that flag directly). I'll even predict money
that the new binaries are identical to the old ones.
yes, they are identical.
Forgive my saying this, but that is a stupendous waste of my cpu cycles
and time. A
Hi,
I'm a JAVA programmer use gentoo linux to test my apps against as many
JDK versions as I can :-). With java-config V1.x I could change the
active VM inside of a script with the line eval `java-config -P
jdk-name`. This no longer works - what IS the new preferred way to
switch the JDK
On Monday 30 October 2006 14:39, local account for liebichw wrote:
Hi,
I'm a JAVA programmer use gentoo linux to test my apps against as many
JDK versions as I can :-). With java-config V1.x I could change the
active VM inside of a script with the line eval `java-config -P
jdk-name`. This no
My wife's mouse went crazy again last night (grr), and now she's lost
some of the components in her Evolution GUI, and I cannot figure out how
to get them back. Her message preview pane (lower right hand corner of
screen) is gone, as is her Window button bar (Mail, Contacts, Calendars,
Memos,
On Monday 30 October 2006 13:54, Alan McKinnon wrote:
Hi all,
I seem to be missing my loop devices in /dev...
And I don't find any docs on the current method to do this. I imagine
it's done with udev rules - anyone have working rules for this that
they'd be willing to share?
alan
Do you
Hello,
Usually when installing a portable, I leeave the windows and resize the disk
space to set up gentoo as the second OS with grub..
On one portable, The windows XP was a pain so I nuked it and got gentoo
working first. Now I need to install XP on the portable, but do not
wish XP to
I know my subject line is a little melodramatic, but this is really
frustrating. I frequently have processes that killall doesn't kill and
kill -9 pid doesn't touch. For instance, this is taken from top:
24135 root 16 0 229m 35m 1064 S 0.3 59.7 8:52.11 javadoc
I have Cntrl+C on the
Michael Sullivan wrote:
I know my subject line is a little melodramatic, but this is really
frustrating. I frequently have processes that killall doesn't kill and
kill -9 pid doesn't touch. For instance, this is taken from top:
24135 root 16 0 229m 35m 1064 S 0.3 59.7 8:52.11
you just have to rerun grub setup.
On 10/30/06, James [EMAIL PROTECTED] wrote:
Hello,
Usually when installing a portable, I leeave the windows and resize the disk
space to set up gentoo as the second OS with grub..
On one portable, The windows XP was a pain so I nuked it and got gentoo
On Mon, 30 Oct 2006 09:01:12 -0600
Michael Sullivan wrote:
I know my subject line is a little melodramatic, but this is really
frustrating. I frequently have processes that killall doesn't kill
and kill -9 pid doesn't touch. For instance, this is taken from
top:
killall = kill
The only
On Monday 30 October 2006 15:05, F.J.Zhao wrote:
Why not to use mknod?
mknod b /dev/loop0 7 0
mknod b /dev/loop1 7 1
mknod b /dev/loop2 7 2
...
chgrp disk /dev/loop*
Because this is a udev only machine and I want udev to create the nodes.
If I have to, I'll put the commands in a script to
On Monday 30 October 2006 21:57, Harm Geerts wrote:
Do you have support for loop devices in your kernel?
udev has default rules for this in /etc/udev/rules.d/50-udev.rules
Symbol: BLK_DEV_LOOP [=y]
Prompt: Loopback device support
Defined at drivers/block/Kconfig:261
Location:
On Monday 30 October 2006 16:57, Harm Geerts wrote:
On Monday 30 October 2006 13:54, Alan McKinnon wrote:
Hi all,
I seem to be missing my loop devices in /dev...
And I don't find any docs on the current method to do this. I
imagine it's done with udev rules - anyone have working rules
Hi folks:
I have recently done my routine System upgrades etc, and suddenly my
wired ethernet port on my laptop is very hesitant to start -- I plug it
in (or put it on the dock) and issue the start command
/etc/init.d/net.eth0 start
And it starts to bring up the interface, and just sits there
On Monday 30 October 2006 15:21, Sascha Lucas wrote:
Forgive my saying this, but that is a stupendous waste of my cpu
cycles and time. A better solution must exist - if this moves to
arch unchanged the gentoo user base will go ballistic
from portage pkg_postinst:
--
In
Allan Spagnol Comar allan.comar at gmail.com writes:
you just have to rerun grub setup.
H,
If I install XP in the partition and it writes over the MBR,
then, upon reboot, how do I get to grub.conf so I have the
option to reboot the gentoo, then run grub setup?
something like this for my
On Monday 30 October 2006 17:49, Novensiles divi Flamen wrote:
On Monday 30 October 2006 21:57, Harm Geerts wrote:
Do you have support for loop devices in your kernel?
udev has default rules for this in /etc/udev/rules.d/50-udev.rules
Symbol: BLK_DEV_LOOP [=y]
Prompt: Loopback device
On Monday 30 October 2006 18:11, james wrote:
Allan Spagnol Comar allan.comar at gmail.com writes:
you just have to rerun grub setup.
H,
If I install XP in the partition and it writes over the MBR,
then, upon reboot, how do I get to grub.conf so I have the
option to reboot the gentoo,
On Mon, 30 Oct 2006 12:46:11 +0800, Chuanwen Wu wrote:
I guess during the 10 minutes,firefox was checking the plugins.
But the time is too long and there is no any tips!
Does this happen each time you start Firefox 2.0? There was a delay when
I first ram FF2, although nothing like 10
On Mon, 30 Oct 2006 16:11:39 + (UTC), james wrote:
If I install XP in the partition and it writes over the MBR,
then, upon reboot, how do I get to grub.conf so I have the
option to reboot the gentoo, then run grub setup?
Run it from the live CD.
--
Neil Bothwick
What is a free gift ?
On Monday 30 October 2006 09:52, GEORGE ZERVAS wrote:
Μιχάλη, αυτή την περίοδο δεν έχω ADSL γραμμή, γιαυτό δεν επικοινωνούμε.
Ελπίζω σύντομα να αποκατασταθεί η σύνδεση. Διέκοψα την παλαιά και έκανα
αίτηση για καινούργια φθηνότερη. Θέλω την άποψή σου, να ζητήσω σταθερή IP,
χωρίς επιπλέον
On Sunday 29 October 2006 15:45, Kevin O'Gorman wrote:
When I run revdep-rebuild, it reports a bunch (around 100) breakages
involving early kde *.la files, but then it reports that
Dynamic linking on your system is consistent... All done.
These broken files are text, and say they're not to be
Mick wrote:
On Monday 30 October 2006 09:52, GEORGE ZERVAS wrote:
Μιχάλη, αυτή την περίοδο δεν έχω ADSL γραμμή, γιαυτό δεν επικοινωνούμε.
Ελπίζω σύντομα να αποκατασταθεί η σύνδεση. Διέκοψα την παλαιά και έκανα
αίτηση για καινούργια φθηνότερη. Θέλω την άποψή σου, να ζητήσω σταθερή IP,
χωρίς
I am puzzled why gkrellm does not always report 100% usage when I'm
running tasks that --- I assume --- always have at least one process in
the runnable state. I've never seen gkrellm pegged at 100%, even when I
run 3 or more emerges (with MAKEOPTS=-j2) at the same time. (I have a
single core
Hello,
I was unable to locate one specific, but there are quite a few problems.
It has to do with a slight change in the MySQL API.
- Neil
On 12:54 Sun 29 Oct , Bartlomiej Syryjczyk wrote:
Neil Hodges napisal(a):
Hello,
This problem is well-known, and present in the bugzilla. The
Bo Ørsted Andresen wrote:
I'd wait hold off on --newuse for a day or two if I were you...
http://thread.gmane.org/gmane.linux.gentoo.devel/43805
It's not that bad. I started 90 minutes ago for 94 packages and
it (2.6 GHz Celeron with 768Mb RAM) is busy with number 78 (xorg-server).
--
On 30 October 2006 17:59, Alan McKinnon wrote:
On Monday 30 October 2006 16:57, Harm Geerts wrote:
On Monday 30 October 2006 13:54, Alan McKinnon wrote:
Hi all,
I seem to be missing my loop devices in /dev...
And I don't find any docs on the current method to do this. I
imagine
Mick wrote:
Indeed! Why when I just hit Reply to a message, I end up posting it in the
gentoo-user mailing list?! This has happened a couple of times so far. The
strange thing is that on some of these cases the messages were not even sent
to my gmail.com account. A common theme may
On Monday 30 October 2006 19:54, Mick wrote:
Indeed! Why when I just hit Reply to a message, I end up posting it
in the gentoo-user mailing list?! This has happened a couple of times
so far. The strange thing is that on some of these cases the messages
were not even sent to my gmail.com
On Monday 30 October 2006 19:05, Hans de Hartog wrote:
Mick wrote:
Indeed! Why when I just hit Reply to a message, I end up posting it in
the gentoo-user mailing list?! This has happened a couple of times so
far. The strange thing is that on some of these cases the messages were
not
On Monday 30 October 2006 19:48, Hans de Hartog wrote:
Bo Ørsted Andresen wrote:
I'd wait hold off on --newuse for a day or two if I were you...
http://thread.gmane.org/gmane.linux.gentoo.devel/43805
It's not that bad. I started 90 minutes ago for 94 packages and
it (2.6 GHz Celeron with
Vladimir G. Ivanovic wrote:
I am puzzled why gkrellm does not always report 100% usage when I'm
running tasks that --- I assume --- always have at least one process in
the runnable state. I've never seen gkrellm pegged at 100%, even when I
run 3 or more emerges (with MAKEOPTS=-j2) at the same
Hans de Hartog wrote:
It's not that bad. I started 90 minutes ago for 94 packages and
it (2.6 GHz Celeron with 768Mb RAM) is busy with number 78 (xorg-server).
Done! In less then 2 hours (rebuild of openoffice takes at least
11 hours).
However, before each unmerge I got:
QA Notice: ECLASS
but what if package isn't merged yet ?
expl:
how do i find out what package i need to emerge so i can use nslookup.
it's something i've been wondering for a while and i just thought it
could fit in this thread even though the poster got the answer to his
question.
thanks all
Leandro Melo
On Sunday 29 October 2006 23:50, lanjelot wrote:
but what if package isn't merged yet ?
You might try
http://www.rommel.stw.uni-erlangen.de/~fejf/cgi-bin/pfs-web.pl
--
gentoo-user@gentoo.org mailing list
On Sun, 29 Oct 2006 23:50:30 +0100, lanjelot wrote:
but what if package isn't merged yet
http://www.rommel.stw.uni-erlangen.de/~fejf/cgi-bin/pfs-web.pl?action=home
--
Neil Bothwick
Hard work has a future payoff. Laziness pays off NOW!
signature.asc
Description: PGP signature
On Monday 30 October 2006 19:42, Etaoin Shrdlu wrote:
Don't know about the rest, but the send later feature has hit me in the
past, too. What can happen is that a message you suspend with send
later actually gets sent automatically after a few, if,
in settings-configure
Hi, everyone!
I decided to activate the portage ELOG system. I can't make portage send
mail or write in the syslog. save appears to be the only working
PORTAGE_ELOG_SYSTEM - it saves log files in /var/log/portage for the
emerge activities. The settings relevant to ELOG in my make.conf are:
lanjelot wrote:
but what if package isn't merged yet ?
expl:
how do i find out what package i need to emerge so i can use nslookup.
it's something i've been wondering for a while and i just thought it
could fit in this thread even though the poster got the answer to his
question.
thanks
If you are so concerned with the awesomeness of XFS's caching... why not
turn on data-journaling? Then data (not just meta-data) is committed to
the journal.
You can also tune XFS to not wait so long to hold cached data.
Alan McKinnon wrote:
On Saturday 28 October 2006 16:41, b.n. wrote:
After sending this I realized that XFS doesn't support journal=data... I
thought journal=data was a general VFS part of the linux kernel... my
bad. :)
I guess you are just left with in kernel tuning (someone previously
posted a link to).
Bryan Whitehead wrote:
If you are so concerned with
Michael Crute mcrute at gmail.com writes:
I am using Cacti on a firewalled production server to do all manner of
system monitoring and metrics. I would also like to setup SNMP on my
development servers that sits behind a firewall at a different data
center. Is there a way that I can securely
On 10/30/06, James [EMAIL PROTECTED] wrote:
Michael Crute mcrute at gmail.com writes:
I am using Cacti on a firewalled production server to do all manner of
system monitoring and metrics. I would also like to setup SNMP on my
development servers that sits behind a firewall at a different
On 10/30/06, Bryan Whitehead [EMAIL PROTECTED] wrote:
After sending this I realized that XFS doesn't support journal=data... I
thought journal=data was a general VFS part of the linux kernel... my
bad. :)
I guess you are just left with in kernel tuning (someone previously
posted a link to).
Anybody know if this is possible? I have a single-head graphics cardcapable of doing 2048x1536. I want to start X with a virtual desktopof 2048x768, make my ViewPort be the left half of said desktop, startx11vnc using the -clip option so that it only shows the right half of
said desktop, and then
On Mon, 2006-10-30 at 08:52 -0600, Michael Sullivan wrote:
My wife's mouse went crazy again last night (grr), and now she's lost
some of the components in her Evolution GUI, and I cannot figure out how
to get them back. Her message preview pane (lower right hand corner of
screen) is gone,
On Mon, 2006-10-30 at 09:01 -0600, Michael Sullivan wrote:
I know my subject line is a little melodramatic, but this is really
frustrating. I frequently have processes that killall doesn't kill and
kill -9 pid doesn't touch. For instance, this is taken from top:
24135 root 16 0
Hi.
In order to document this problem, I solve it installing
media-plugins/gst-plugins-alsa package. Thanks anyway.
[]s
Leandro
2006/10/30, Leandro Melo de Sales [EMAIL PROTECTED]:
Hi list...
I configured alsa system and it detected my sound card. Alsamixer
can control the volume as well
Neil Bothwick neil at digimed.co.uk writes:
If I install XP in the partition and it writes over the MBR,
then, upon reboot, how do I get to grub.conf so I have the
option to reboot the gentoo, then run grub setup?
Run it from the live CD.
Ok here's what I did in case anyone else has to
On Tue, 2006-10-31 at 09:03 +0930, Iain Buchanan wrote:
On Mon, 2006-10-30 at 08:52 -0600, Michael Sullivan wrote:
My wife's mouse went crazy again last night (grr), and now she's lost
some of the components in her Evolution GUI, and I cannot figure out how
to get them back. Her message
On Tue, 2006-10-31 at 09:05 +0930, Iain Buchanan wrote:
On Mon, 2006-10-30 at 09:01 -0600, Michael Sullivan wrote:
I know my subject line is a little melodramatic, but this is really
frustrating. I frequently have processes that killall doesn't kill and
kill -9 pid doesn't touch. For
Hi list...
I have an usb sound system from Gradiente company (an eletronic
device factory) and I plugged it on my system. dmesg command shows
this:
input: Gradiente AS-M5X0 as /class/input/input3
input: USB HID v1.00 Device [Gradiente AS-M5X0] on usb-:00:1d.1-1
But when I play a
i'm amazed by how reactive you people were, eix -S was actually what i
was looking for for so long.
thx heaps!
kashani wrote:
lanjelot wrote:
but what if package isn't merged yet ?
expl:
how do i find out what package i need to emerge so i can use nslookup.
it's something i've been
Nice suggestion.
I pulled the RAID card, and moved the remaining SATA card from SATA4 to SATA1.
I then was able to successfully install Mandriva Linux (quickest distro to
test) with no grub startup problems.
By proceeding step-by-step with reinstalling the RAID card, I should be able to
figure
On 30/10/06, Michael Sullivan [EMAIL PROTECTED] wrote:
I know my subject line is a little melodramatic, but this is really
frustrating. I frequently have processes that killall doesn't kill and
kill -9 pid doesn't touch. For instance, this is taken from top:
24135 root 16 0 229m 35m
On 10/30/06, Michael Sullivan [EMAIL PROTECTED] wrote:
I know my subject line is a little melodramatic, but this is really
frustrating. I frequently have processes that killall doesn't kill and
kill -9 pid doesn't touch. For instance, this is taken from top:
24135 root 16 0 229m 35m
On 10/30/06, Leandro Melo de Sales [EMAIL PROTECTED] wrote:
Hi list...
I have an usb sound system from Gradiente company (an eletronic
device factory) and I plugged it on my system. dmesg command shows
this:
input: Gradiente AS-M5X0 as /class/input/input3
input: USB HID v1.00 Device
Hi... The device is configured and I type cat xxx /dev/sound/dsp1
and I got an strange sound, but this prove that the device was
recognized by the kernel. I also can control volume of the second
audio device through alsamixer. The question is: how can I specify (on
alsa) that the default device
Hi,
After I click on Apply button the Alsa Device Configuration section
become enabled, but when I specify hw1,0 in Stereo text field and play
a song amarok shows the message: Audio output unavailable; the device
is busy..
/proc/asound/ # ls
ASM5X0 Modem card1 cardshwdeposs seq
Hi...
just to document. There are two options:
1) I created ~/.asoundrc file (as suggested by Richard) but with some
modification as shown next (I don't know if all this option is
necessary, but the sound is perfect):
- ~/.asoundrc
pcm.card0 {
type hw
card 1
}
pcm.!default
On Monday 30 October 2006 19:50, Kevin O'Gorman wrote:
I checked a number of them, and they were clearly orphans: the
libraries they were
associated with originally had ceased to exist, which makes sense
because they where also coordinated with KDE versions (3.2 and such)
that I no longer
78 matches
Mail list logo
