On Thu, May 15, 2014 at 5:01 PM, Stefan G. Weichinger li...@xunil.at wrote:
Am 15.05.2014 22:38, schrieb cov...@ccs.covici.com:
image=/boot/vmlinuz-3.6.2-gentoo
phew. 3.6.2 is from October 2012 ...
Did you recompile it with the suggested options for systemd?
Maybe it doesn't matter, but
Canek Peláez Valdés can...@gmail.com wrote:
On Thu, May 15, 2014 at 5:01 PM, Stefan G. Weichinger li...@xunil.at wrote:
Am 15.05.2014 22:38, schrieb cov...@ccs.covici.com:
image=/boot/vmlinuz-3.6.2-gentoo
phew. 3.6.2 is from October 2012 ...
Did you recompile it with the suggested
Am 16.05.2014 12:53, schrieb cov...@ccs.covici.com:
Now for some systemd problems. The root file system was read only when
I logged in, but I could remount it rw -- not sure why this was
happening. Some units did start, but most did not.
Maybe you only got into emergency mode?
Also,
Canek Peláez Valdés can...@gmail.com wrote:
On Thu, May 15, 2014 at 5:01 PM, Stefan G. Weichinger li...@xunil.at wrote:
Am 15.05.2014 22:38, schrieb cov...@ccs.covici.com:
image=/boot/vmlinuz-3.6.2-gentoo
phew. 3.6.2 is from October 2012 ...
Did you recompile it with the suggested
On Fri, May 16, 2014 at 5:53 AM, cov...@ccs.covici.com wrote:
Canek Peláez Valdés can...@gmail.com wrote:
On Thu, May 15, 2014 at 5:01 PM, Stefan G. Weichinger li...@xunil.at wrote:
Am 15.05.2014 22:38, schrieb cov...@ccs.covici.com:
image=/boot/vmlinuz-3.6.2-gentoo
phew. 3.6.2 is
On Fri, May 16, 2014 at 7:46 AM, cov...@ccs.covici.com wrote:
Canek Peláez Valdés can...@gmail.com wrote:
On Thu, May 15, 2014 at 5:01 PM, Stefan G. Weichinger li...@xunil.at wrote:
Am 15.05.2014 22:38, schrieb cov...@ccs.covici.com:
image=/boot/vmlinuz-3.6.2-gentoo
phew. 3.6.2 is
On Fri, May 16, 2014 at 12:17 PM, cov...@ccs.covici.com wrote:
[snip]
I don't understand the current situation .So now you get ALL your
volumes activated, or not?
Yep, they are all activated and they all get mounted.
Cool, one problem less.
Now for some systemd problems. The root file
Canek Peláez Valdés can...@gmail.com wrote:
On Fri, May 16, 2014 at 12:17 PM, cov...@ccs.covici.com wrote:
[snip]
I don't understand the current situation .So now you get ALL your
volumes activated, or not?
Yep, they are all activated and they all get mounted.
Cool, one problem
On Fri, May 16, 2014 at 1:11 PM, cov...@ccs.covici.com wrote:
Canek Peláez Valdés can...@gmail.com wrote:
On Fri, May 16, 2014 at 12:17 PM, cov...@ccs.covici.com wrote:
[snip]
I don't understand the current situation .So now you get ALL your
volumes activated, or not?
Yep, they are
Canek Peláez Valdés can...@gmail.com wrote:
On Fri, May 16, 2014 at 1:11 PM, cov...@ccs.covici.com wrote:
Canek Peláez Valdés can...@gmail.com wrote:
On Fri, May 16, 2014 at 12:17 PM, cov...@ccs.covici.com wrote:
[snip]
I don't understand the current situation .So now you get ALL
On Wed, May 14, 2014 at 5:26 PM, cov...@ccs.covici.com wrote:
[snip]
Well, the workaround sort of worked -- it went through the initrd -- I
had debug in the kernel command line, but it did not stop for nothing!
When it went to the real root, however it did not activate any of the
lvm volumes
On Thu, May 15, 2014 at 1:18 AM, Canek Peláez Valdés can...@gmail.com wrote:
On Wed, May 14, 2014 at 5:26 PM, cov...@ccs.covici.com wrote:
[snip]
Well, the workaround sort of worked -- it went through the initrd -- I
had debug in the kernel command line, but it did not stop for nothing!
Canek Peláez Valdés can...@gmail.com wrote:
On Wed, May 14, 2014 at 5:26 PM, cov...@ccs.covici.com wrote:
[snip]
Well, the workaround sort of worked -- it went through the initrd -- I
had debug in the kernel command line, but it did not stop for nothing!
When it went to the real root,
Canek Peláez Valdés can...@gmail.com wrote:
On Thu, May 15, 2014 at 1:18 AM, Canek Peláez Valdés can...@gmail.com wrote:
On Wed, May 14, 2014 at 5:26 PM, cov...@ccs.covici.com wrote:
[snip]
Well, the workaround sort of worked -- it went through the initrd -- I
had debug in the kernel
Am 15.05.2014 11:39, schrieb cov...@ccs.covici.com:
I did not try the -H, I may test with that later.
I did look at the --print-cmdline and copied the volumes they mentioned,
but I have other lvm volumes in my fstab and none of them were activated,
only the ones I specified in the command
Stefan G. Weichinger li...@xunil.at wrote:
Am 15.05.2014 11:39, schrieb cov...@ccs.covici.com:
I did not try the -H, I may test with that later.
I did look at the --print-cmdline and copied the volumes they mentioned,
but I have other lvm volumes in my fstab and none of them were
Canek Peláez Valdés can...@gmail.com wrote:
On Thu, May 15, 2014 at 1:18 AM, Canek Peláez Valdés can...@gmail.com wrote:
On Wed, May 14, 2014 at 5:26 PM, cov...@ccs.covici.com wrote:
[snip]
Well, the workaround sort of worked -- it went through the initrd -- I
had debug in the kernel
Am 15.05.2014 12:19, schrieb cov...@ccs.covici.com:
Sure, but what I was looking for was a way to start syslogd and klogd
using systemd -- I do have a socket option so they can listen on the
socket so that should be OK.
So you look for service files?
A quick google finds examples for these 2
Am 15.05.2014 13:50, schrieb cov...@ccs.covici.com:
Canek Peláez Valdés can...@gmail.com wrote:
On Thu, May 15, 2014 at 1:18 AM, Canek Peláez Valdés can...@gmail.com
wrote:
On Wed, May 14, 2014 at 5:26 PM, cov...@ccs.covici.com wrote:
[snip]
Well, the workaround sort of worked -- it
Stefan G. Weichinger li...@xunil.at wrote:
Am 15.05.2014 12:19, schrieb cov...@ccs.covici.com:
Sure, but what I was looking for was a way to start syslogd and klogd
using systemd -- I do have a socket option so they can listen on the
socket so that should be OK.
So you look for
Stefan G. Weichinger li...@xunil.at wrote:
Am 15.05.2014 13:50, schrieb cov...@ccs.covici.com:
Canek Peláez Valdés can...@gmail.com wrote:
On Thu, May 15, 2014 at 1:18 AM, Canek Peláez Valdés can...@gmail.com
wrote:
On Wed, May 14, 2014 at 5:26 PM, cov...@ccs.covici.com wrote:
Am 15.05.2014 14:38, schrieb cov...@ccs.covici.com:
Stefan G. Weichinger li...@xunil.at wrote:
Am 15.05.2014 13:50, schrieb cov...@ccs.covici.com:
Canek Peláez Valdés can...@gmail.com wrote:
On Thu, May 15, 2014 at 1:18 AM, Canek Peláez Valdés can...@gmail.com
wrote:
On Wed, May 14, 2014
2014-05-15 0:47 GMT-06:00 Canek Peláez Valdés can...@gmail.com:
I'm an idiot; I didn't saw the documentation about hostonly_cmdline;
BTW Jc, you used host_cmdline, I think the former is the correct one.
I don't know right now how host_cmdline got in my config(that was a
crazy day between
2014-05-15 6:38 GMT-06:00 cov...@ccs.covici.com:
Did you enable lvm2-lvmetad.service or socket (and set use_lvmetad=1 in
lvm.conf)?
Yep, did not see that starting.
I have seen an odd behaviour regarding this sometimes, particulary
when I upgrade kernel, for some reason in my first reboot, my
On Thu, May 15, 2014 at 2:18 AM, Canek Peláez Valdés can...@gmail.com wrote:
OK, I was a little mystified about why dracut-036 worked on my system
and 037 didn't. Before I tried any workaround, I wanted to know what
changed from the previous version to the current one.
So I generated an
On Thu, May 15, 2014 at 4:48 AM, cov...@ccs.covici.com wrote:
Canek Peláez Valdés can...@gmail.com wrote:
On Thu, May 15, 2014 at 1:18 AM, Canek Peláez Valdés can...@gmail.com
wrote:
On Wed, May 14, 2014 at 5:26 PM, cov...@ccs.covici.com wrote:
[snip]
Well, the workaround sort of
On Thu, May 15, 2014 at 4:39 AM, cov...@ccs.covici.com wrote:
Canek Peláez Valdés can...@gmail.com wrote:
On Wed, May 14, 2014 at 5:26 PM, cov...@ccs.covici.com wrote:
[snip]
Well, the workaround sort of worked -- it went through the initrd -- I
had debug in the kernel command line,
Am 15.05.2014 20:23, schrieb Canek Peláez Valdés:
John, could you please include here the output of lsblk, your fstab,
your dracut.conf, and your lilo.conf?
.. I agree! it's hard to keep track and overview in here :-)
Canek Peláez Valdés can...@gmail.com wrote:
On Thu, May 15, 2014 at 4:39 AM, cov...@ccs.covici.com wrote:
Canek Peláez Valdés can...@gmail.com wrote:
On Wed, May 14, 2014 at 5:26 PM, cov...@ccs.covici.com wrote:
[snip]
Well, the workaround sort of worked -- it went through the
Am 15.05.2014 22:38, schrieb cov...@ccs.covici.com:
image=/boot/vmlinuz-3.6.2-gentoo
phew. 3.6.2 is from October 2012 ...
Did you recompile it with the suggested options for systemd?
Maybe it doesn't matter, but just a thought ... that kernel is quite old.
Stefan
Stefan G. Weichinger li...@xunil.at wrote:
Am 15.05.2014 22:38, schrieb cov...@ccs.covici.com:
image=/boot/vmlinuz-3.6.2-gentoo
phew. 3.6.2 is from October 2012 ...
Did you recompile it with the suggested options for systemd?
Maybe it doesn't matter, but just a thought ... that kernel
Canek Peláez Valdés can...@gmail.com wrote:
On Mon, May 12, 2014 at 11:52 AM, cov...@ccs.covici.com wrote:
Canek Peláez Valdés can...@gmail.com wrote:
On Mon, May 12, 2014 at 11:31 AM, cov...@ccs.covici.com wrote:
[snip]
OK, I will try dracut,
I hope it works with dracut. This
Canek Peláez Valdés can...@gmail.com wrote:
On Mon, May 12, 2014 at 11:52 AM, cov...@ccs.covici.com wrote:
Canek Peláez Valdés can...@gmail.com wrote:
On Mon, May 12, 2014 at 11:31 AM, cov...@ccs.covici.com wrote:
[snip]
OK, I will try dracut,
I hope it works with dracut. This
2014-05-14 3:43 GMT-06:00 cov...@ccs.covici.com:
I also in my kernel command line said rd.lvm=1 just to make sure.
Have tried this too(only rd.lvm), until I didn't tell what to
recognize nothing was done, this might be a bug, but I forgot about it
.
2014-05-14 3:40 GMT-06:00 cov...@ccs.covici.com:
Canek Peláez Valdés can...@gmail.com wrote:
On Mon, May 12, 2014 at 11:52 AM, cov...@ccs.covici.com wrote:
Canek Peláez Valdés can...@gmail.com wrote:
On Mon, May 12, 2014 at 11:31 AM, cov...@ccs.covici.com wrote:
[snip]
OK, I will
On Wed, May 14, 2014 at 4:43 AM, cov...@ccs.covici.com wrote:
Canek Peláez Valdés can...@gmail.com wrote:
On Mon, May 12, 2014 at 11:52 AM, cov...@ccs.covici.com wrote:
Canek Peláez Valdés can...@gmail.com wrote:
On Mon, May 12, 2014 at 11:31 AM, cov...@ccs.covici.com wrote:
[snip]
Canek Peláez Valdés can...@gmail.com wrote:
On Wed, May 14, 2014 at 4:43 AM, cov...@ccs.covici.com wrote:
Canek Peláez Valdés can...@gmail.com wrote:
On Mon, May 12, 2014 at 11:52 AM, cov...@ccs.covici.com wrote:
Canek Peláez Valdés can...@gmail.com wrote:
On Mon, May 12, 2014
On Wed, May 14, 2014 at 10:05 AM, cov...@ccs.covici.com wrote:
[snip]
I am using version 037 and the command line was very simple
As I told you in [1], the 037 version has problems with LVM; please
also check the thread in [2], specially the post in [3].
Please try again with dracut-036-r4.
Canek Peláez Valdés can...@gmail.com wrote:
On Wed, May 14, 2014 at 10:05 AM, cov...@ccs.covici.com wrote:
[snip]
I am using version 037 and the command line was very simple
As I told you in [1], the 037 version has problems with LVM; please
also check the thread in [2], specially the
2014-05-14 9:42 GMT-06:00 cov...@ccs.covici.com:
Canek Peláez Valdés can...@gmail.com wrote:
On Wed, May 14, 2014 at 10:05 AM, cov...@ccs.covici.com wrote:
[snip]
I am using version 037 and the command line was very simple
As I told you in [1], the 037 version has problems with LVM;
On Wed, May 14, 2014 at 10:42 AM, cov...@ccs.covici.com wrote:
Canek Peláez Valdés can...@gmail.com wrote:
On Wed, May 14, 2014 at 10:05 AM, cov...@ccs.covici.com wrote:
[snip]
I am using version 037 and the command line was very simple
As I told you in [1], the 037 version has problems
2014-05-14 9:51 GMT-06:00 Canek Peláez Valdés can...@gmail.com:
On Wed, May 14, 2014 at 10:42 AM, cov...@ccs.covici.com wrote:
Canek Peláez Valdés can...@gmail.com wrote:
On Wed, May 14, 2014 at 10:05 AM, cov...@ccs.covici.com wrote:
[snip]
I am using version 037 and the command line was
On Wed, May 14, 2014 at 10:55 AM, Jc García jyo.gar...@gmail.com wrote:
2014-05-14 9:51 GMT-06:00 Canek Peláez Valdés can...@gmail.com:
On Wed, May 14, 2014 at 10:42 AM, cov...@ccs.covici.com wrote:
Canek Peláez Valdés can...@gmail.com wrote:
On Wed, May 14, 2014 at 10:05 AM,
Canek Peláez Valdés can...@gmail.com wrote:
On Wed, May 14, 2014 at 10:55 AM, Jc García jyo.gar...@gmail.com wrote:
2014-05-14 9:51 GMT-06:00 Canek Peláez Valdés can...@gmail.com:
On Wed, May 14, 2014 at 10:42 AM, cov...@ccs.covici.com wrote:
Canek Peláez Valdés can...@gmail.com wrote:
2014-05-14 10:18 GMT-06:00 Canek Peláez Valdés can...@gmail.com:
I will try your workaround, although my system is a little more
complicated, since it uses RAID and LUKS besides LVM.
That surely makes things more complicated, and I wouldn't expect
something that simple to make the 'workaround',
Am 14.05.2014 18:38, schrieb cov...@ccs.covici.com:
Canek Peláez Valdés can...@gmail.com wrote:
On Wed, May 14, 2014 at 10:55 AM, Jc García jyo.gar...@gmail.com wrote:
2014-05-14 9:51 GMT-06:00 Canek Peláez Valdés can...@gmail.com:
On Wed, May 14, 2014 at 10:42 AM, cov...@ccs.covici.com
Canek Peláez Valdés can...@gmail.com wrote:
On Wed, May 14, 2014 at 10:55 AM, Jc García jyo.gar...@gmail.com wrote:
2014-05-14 9:51 GMT-06:00 Canek Peláez Valdés can...@gmail.com:
On Wed, May 14, 2014 at 10:42 AM, cov...@ccs.covici.com wrote:
Canek Peláez Valdés can...@gmail.com wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA256
On 14/05/14 19:40, cov...@ccs.covici.com wrote:
Well, I rebooted under dracut, but it did not do the lvmscan and so the job
trying to find the root file system timed out after 90 seconds. It took me
to the emergency shell which I had specified,
Am 13.05.2014 05:46, schrieb cov...@ccs.covici.com:
Hi. Well, even with use_fstab=yes, it does not put one, just
/etc/fstab.empty of 0 length -- how can I fix?
I didn't read the full thread yet ... but let me get that straight for
me to understand the status:
* You want to have / and
Stefan G. Weichinger li...@xunil.at wrote:
Am 13.05.2014 05:46, schrieb cov...@ccs.covici.com:
Hi. Well, even with use_fstab=yes, it does not put one, just
/etc/fstab.empty of 0 length -- how can I fix?
I didn't read the full thread yet ... but let me get that straight for
me to
Am 13.05.2014 14:29, schrieb cov...@ccs.covici.com:
* What is the status now with dracut? The mentioned options ... I
don't have them in my config (although my setup is now completely
different from yours ... anyway).
I emerged it and want to use it to boot with systemd.
Did you configure
2014-05-12 21:46 GMT-06:00 cov...@ccs.covici.com:
Hi. Well, even with use_fstab=yes, it does not put one, just
/etc/fstab.empty of 0 length -- how can I fix?
That is strange, never had this problem, actually adding this made it
work for me, I assume you actually used the ' yes ', might be
2014-05-13 7:02 GMT-06:00 Jc García jyo.gar...@gmail.com:
2014-05-12 21:46 GMT-06:00 cov...@ccs.covici.com:
Hi. Well, even with use_fstab=yes, it does not put one, just
/etc/fstab.empty of 0 length -- how can I fix?
That is strange, never had this problem, actually adding this made it
work
Stefan G. Weichinger li...@xunil.at wrote:
Am 13.05.2014 14:29, schrieb cov...@ccs.covici.com:
* What is the status now with dracut? The mentioned options ... I
don't have them in my config (although my setup is now completely
different from yours ... anyway).
I emerged it and want
2014-05-13 7:18 GMT-06:00 cov...@ccs.covici.com:
Nope, dracut does things different, so I am still working on the kernel
command line. My question was about the /etc/fstab.empty problem.
In the documentation it says, enabling this, uses the fstab instead of
/proc/self/mountinfo, when
Jc García jyo.gar...@gmail.com wrote:
2014-05-12 21:46 GMT-06:00 cov...@ccs.covici.com:
Hi. Well, even with use_fstab=yes, it does not put one, just
/etc/fstab.empty of 0 length -- how can I fix?
That is strange, never had this problem, actually adding this made it
work for me, I
Jc García jyo.gar...@gmail.com wrote:
2014-05-13 7:18 GMT-06:00 cov...@ccs.covici.com:
Nope, dracut does things different, so I am still working on the kernel
command line. My question was about the /etc/fstab.empty problem.
In the documentation it says, enabling this, uses the fstab
2014-05-13 7:43 GMT-06:00 cov...@ccs.covici.com:
Jc García jyo.gar...@gmail.com wrote:
2014-05-12 21:46 GMT-06:00 cov...@ccs.covici.com:
Hi. Well, even with use_fstab=yes, it does not put one, just
/etc/fstab.empty of 0 length -- how can I fix?
That is strange, never had this problem,
Hi. I have been trying to get systemd to boot, but I have run into
several problems and need some help. I am using everything but /boot as
lvm's, with a separate user partition. I had to copy systemd to /sbin
because the initrd looks for the realinit too soon, but that is maybe
another matter.
On Mon, May 12, 2014 at 2:22 AM, cov...@ccs.covici.com wrote:
Hi. I have been trying to get systemd to boot, but I have run into
several problems and need some help. I am using everything but /boot as
lvm's, with a separate user partition. I had to copy systemd to /sbin
because the initrd
Canek Peláez Valdés can...@gmail.com wrote:
On Mon, May 12, 2014 at 2:22 AM, cov...@ccs.covici.com wrote:
Hi. I have been trying to get systemd to boot, but I have run into
several problems and need some help. I am using everything but /boot as
lvm's, with a separate user partition. I
2014-05-12 4:15 GMT-06:00 cov...@ccs.covici.com:
How can I do this, genkernel looks for its init before it mounts /usr
and genkernel-next will not mount the separate /usr at all. My latest
initrd is from the very latest genkernel.
But how to get a complete history of systemd actions in the
On Mon, May 12, 2014 at 5:15 AM, cov...@ccs.covici.com wrote:
Canek Peláez Valdés can...@gmail.com wrote:
On Mon, May 12, 2014 at 2:22 AM, cov...@ccs.covici.com wrote:
Hi. I have been trying to get systemd to boot, but I have run into
several problems and need some help. I am using
Jc García jyo.gar...@gmail.com wrote:
2014-05-12 4:15 GMT-06:00 cov...@ccs.covici.com:
How can I do this, genkernel looks for its init before it mounts /usr
and genkernel-next will not mount the separate /usr at all. My latest
initrd is from the very latest genkernel.
But how to
Canek Peláez Valdés can...@gmail.com wrote:
On Mon, May 12, 2014 at 5:15 AM, cov...@ccs.covici.com wrote:
Canek Peláez Valdés can...@gmail.com wrote:
On Mon, May 12, 2014 at 2:22 AM, cov...@ccs.covici.com wrote:
Hi. I have been trying to get systemd to boot, but I have run into
On Mon, May 12, 2014 at 11:31 AM, cov...@ccs.covici.com wrote:
[snip]
OK, I will try dracut,
I hope it works with dracut. This is my kernel command line and
RAID/LVM related stuff from GRUB2:
GRUB_CMDLINE_LINUX=init=/usr/lib/systemd/systemd quiet nosplash
GRUB_PRELOAD_MODULES=lvm mdraid1x
And
Canek Peláez Valdés can...@gmail.com wrote:
On Mon, May 12, 2014 at 11:31 AM, cov...@ccs.covici.com wrote:
[snip]
OK, I will try dracut,
I hope it works with dracut. This is my kernel command line and
RAID/LVM related stuff from GRUB2:
GRUB_CMDLINE_LINUX=init=/usr/lib/systemd/systemd
On Mon, May 12, 2014 at 11:52 AM, cov...@ccs.covici.com wrote:
Canek Peláez Valdés can...@gmail.com wrote:
On Mon, May 12, 2014 at 11:31 AM, cov...@ccs.covici.com wrote:
[snip]
OK, I will try dracut,
I hope it works with dracut. This is my kernel command line and
RAID/LVM related stuff
2014-05-12 10:22 GMT-06:00 cov...@ccs.covici.com:
My kernel command line is like this:
init=/linuxrc ramdisk=8192 real_root=/dev/mapper/linux--files-64--root
udev video=uvesafb:1280x1024 speakup.synth=spkout vmalloc=256M dolvm
rootfstype=ext4 real_init=/sbin/systemd systemd.confirm_spawn=yes
Jc García jyo.gar...@gmail.com wrote:
2014-05-12 10:22 GMT-06:00 cov...@ccs.covici.com:
My kernel command line is like this:
init=/linuxrc ramdisk=8192 real_root=/dev/mapper/linux--files-64--root
udev video=uvesafb:1280x1024 speakup.synth=spkout vmalloc=256M dolvm
rootfstype=ext4
Jc García jyo.gar...@gmail.com wrote:
2014-05-12 4:15 GMT-06:00 cov...@ccs.covici.com:
How can I do this, genkernel looks for its init before it mounts /usr
and genkernel-next will not mount the separate /usr at all. My latest
initrd is from the very latest genkernel.
But how to
71 matches
Mail list logo
